The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Siloxane Polymers for High-Resolution, High-Accuracy Soft Lithography
Abstract
We report the formulation of siloxane polymers for high-resolution, high-accuracy stamps for soft lithography. With this technique, a molecular, polymeric, or liquid ink is applied to the surface of a stamp and then transferred by conformal contact to a substrate. Stamps for this technique are usually made of a commercial siloxane elastomer with appropriate mechanical properties to achieve conformal contact but are incapable of printing accurate, submicrometer patterns. To formulate better stamp polymers, we used models of rubber-like elasticity as guidelines. Poly(dimethylsiloxane) networks were prepared from vinyl and hydrosilane end-linked polymers and vinyl and hydrosilane copolymers, with varying mass between cross-links and junction functionality. The polymer formulations were characterized by strain at break as well as compression modulus and surface hardness measurements. This resulted in the identification of bimodal polymer networks having mechanical properties that allow the replication of high-density patterns at the 100 nm scale and that withstand the mechanical constraints during use as a stamp material. We also demonstrate advantageous implementations of the formulated polymers in hybrid stamps that achieve submicrometer-dimensional accuracy over large areas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xia, Y., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<550::aid-anie550>3.0.co;2-g · Cited by 4,285
Statistical Mechanics of Cross-Linked Polymer Networks I. Rubberlike Elasticity
Flory, P. J., & Rehner, J. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723791 · Cited by 2,421
Rubberlike Elasticity: A Molecular Primer
Mark, J. E., & Erman, B. (1988) · Cited by 590
Structures and Properties of Rubberlike Networks
Erman, B., & Mark, J. E. (1997) · Oxford University Press eBooks · doi:10.1093/oso/9780195082371.001.0001 · Cited by 526
Bernard, A., Delamarche, E., Schmid, H., Michel, B., Bosshard, H. R., & Biebuyck, H. (1998) · Langmuir · doi:10.1021/la980037l · Cited by 518
Self-citationTheory of elasticity of polymer networks. 3
Flory, P. J., & Erman, B. (1982) · Macromolecules · doi:10.1021/ma00231a022 · Cited by 475
Theory of the Increase in Rigidity of Rubber during Cure
James, H. M., & Guth, E. (1947) · The Journal of Chemical Physics · doi:10.1063/1.1746626 · Cited by 432
Stability of molded polydimethylsiloxane microstructures
Delamarche, E., Schmid, H., Michel, B., & Biebuyck, H. (1997) · Advanced Materials · doi:10.1002/adma.19970090914 · Cited by 360
Self-citationLight-coupling masks for lensless, sub-wavelength optical lithography
Schmid, H., Biebuyck, H. A., Michel, B., & Martin, O. J. F. (1998) · Applied Physics Letters · doi:10.1063/1.121362 · Cited by 104
Self-citationElastomeric networks cross-linked by silica or titania fillers
Sur, G. S., & Mark, J. E. (1985) · European Polymer Journal · doi:10.1016/0014-3057(85)90213-7 · Cited by 85
Cited by
Self-Assembled Monolayers of Thiolates on Metals as a Form of Nanotechnology
Love, J. C., Estroff, L. A., Kriebel, J. K., Nuzzo, R. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr0300789 · Cited by 8,282
Soft Lithography in Biology and Biochemistry
Whitesides, G. M., Ostuni, E., Takayama, S., Jiang, X., & Ingber, D. E. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.335 · Cited by 2,607
Nanostructured Plasmonic Sensors
Stewart, M. E., Anderton, C. R., Thompson, L. B., Maria, J., Gray, S. K., Rogers, J. A., & Nuzzo, R. G. (2008) · Chemical Reviews · doi:10.1021/cr068126n · Cited by 2,415
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
Gates, B. D., Xu, Q., Stewart, M., Ryan, D., Willson, C. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr030076o · Cited by 2,020
Nanoimprint Lithography: Methods and Material Requirements
Guo, L. J. (2007) · Advanced Materials · doi:10.1002/adma.200600882 · Cited by 1,842
Surface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Biswas, A., Bayer, I. S., Biris, A. S., Wang, T., Dervishi, E., & Faupel, F. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.11.001 · Cited by 909
PDMS with designer functionalities—Properties, modifications strategies, and applications
Wolf, M. P., Salieb-Beugelaar, G. B., & Hunziker, P. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.001 · Cited by 853
Patterning self-assembled monolayers
Smith, R. K., Lewis, P. A., & Weiss, P. S. (2004) · Progress in Surface Science · doi:10.1016/j.progsurf.2003.12.001 · Cited by 807
Improved Pattern Transfer in Soft Lithography Using Composite Stamps
Odom, T. W., Love, J. C., Wolfe, D. B., Paul, K. E., & Whitesides, G. M. (2002) · Langmuir · doi:10.1021/la020169l · Cited by 709
Design of pressure-driven microfluidic networks using electric circuit analogy
Oh, K. W., Lee, K., Ahn, B., & Furlani, E. P. (2012) · Lab Chip · doi:10.1039/c2lc20799k · Cited by 685
Engineering metallic nanostructures for plasmonics and nanophotonics
Lindquist, N. C., Nagpal, P., McPeak, K. M., Norris, D. J., & Oh, S.-H. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/3/036501 · Cited by 497
Fabrication Approaches for Generating Complex Micro- and Nanopatterns on Polymeric Surfaces
del Campo, A., & Arzt, E. (2008) · Chemical Reviews · doi:10.1021/cr050018y · Cited by 484
Printing meets lithography: Soft approaches to high-resolution patterning
Michel, B., Bernard, A., Bietsch, A., Delamarche, E., Geissler, M., Juncker, D., Kind, H., Renault, J.-P., Rothuizen, H., Schmid, H., et al. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.455.0697 · Cited by 471
Self-citationNanoparticle printing with single-particle resolution
Kraus, T., Malaquin, L., Schmid, H., Riess, W., Spencer, N. D., & Wolf, H. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.262 · Cited by 449
Self-citationMicrocontact Printing: Limitations and Achievements
Perl, A., Reinhoudt, D. N., & Huskens, J. (2009) · Advanced Materials · doi:10.1002/adma.200801864 · Cited by 447
Constraints on Microcontact Printing Imposed by Stamp Deformation
Hui, C. Y., Jagota, A., Lin, Y. Y., & Kramer, E. J. (2002) · Langmuir · doi:10.1021/la0113567 · Cited by 426
Polymer Imprint Lithography with Molecular-Scale Resolution
Hua, F., Sun, Y., Gaur, A., Meitl, M. A., Bilhaut, L., Rotkina, L., Wang, J., Geil, P., Shim, M., Rogers, J. A., et al. (2004) · Nano Letters · doi:10.1021/nl048355u · Cited by 413
Nanofluidic Devices and Their Applications
Abgrall, P., & Nguyen, N. T. (2008) · Analytical Chemistry · doi:10.1021/ac702296u · Cited by 383
Bio-Microarray Fabrication Techniques—A Review
Barbulovic-Nad, I., Lucente, M., Sun, Y., Zhang, M., Wheeler, A. R., & Bussmann, M. (2006) · Critical Reviews in Biotechnology · doi:10.1080/07388550600978358 · Cited by 376
Wearable and flexible sensors for user-interactive health-monitoring devices
Ha, M., Lim, S., & Ko, H. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01063c · Cited by 352
UNCONVENTIONAL NANOFABRICATION
Gates, B. D., Xu, Q., Love, J. C., Wolfe, D. B., & Whitesides, G. M. (2004) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.34.052803.091100 · Cited by 324
Nanofabrication: Conventional and nonconventional methods
Chen, Y., & Pépin, A. (2001) · ELECTROPHORESIS · doi:10.1002/1522-2683(200101)22:2<187::aid-elps187>3.0.co;2-0 · Cited by 301
Hillborg, H., Tomczak, N., Olàh, A., Schönherr, H., & Vancso, G. J. (2004) · Langmuir · doi:10.1021/la035552k · Cited by 299
An Ultraviolet-Curable Mold for Sub-100-nm Lithography
Choi, S.-J., Yoo, P. J., Baek, S. J., Kim, T. W., & Lee, H. H. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048972k · Cited by 294
Recent advances in microcontact printing
Quist, A. P., Pavlovic, E., & Oscarsson, S. (2005) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2847-z · Cited by 292
Kim, J., Seong, J., Kim, W., Lee, G.-Y., Kim, S., Kim, H., Moon, S.-W., Oh, D. K., Yang, Y., Park, J., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01485-5 · Cited by 285
D'Urso, M., & Kurniawan, N. A. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.609653 · Cited by 280
Single-step manufacturing of hierarchical dielectric metalens in the visible
Yoon, G., Kim, K., Huh, D., Lee, H., & Rho, J. (2020) · Nature Communications · doi:10.1038/s41467-020-16136-5 · Cited by 276
Conformal contact and pattern stability of stamps used for soft lithography
Bietsch, A., & Michel, B. (2000) · Journal of Applied Physics · doi:10.1063/1.1289816 · Cited by 269
Self-citation
Metadata
- Authors
- Schmid, H., & Michel, B.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-03-25
- Volume
- 33
- Issue
- 8
- Pages
- 3042-3049
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2053004872
- Cited by
- 673
- References
- 15
- FWCI
- 18.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.