The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Supramolecular Halogen Bond Passivation of Organic–Inorganic Halide Perovskite Solar Cells
Abstract
Organic-inorganic halide perovskites, such as CH3NH3PbX3 (X = I(-), Br(-), Cl(-)), are attracting growing interest to prepare low-cost solar cells that are capable of converting sunlight to electricity at the highest efficiencies. Despite negligible effort on enhancing materials' purity or passivation of surfaces, high efficiencies have already been achieved. Here, we show that trap states at the perovskite surface generate charge accumulation and consequent recombination losses in working solar cells. We identify that undercoordinated iodine ions within the perovskite structure are responsible and make use of supramolecular halogen bond complexation to successfully passivate these sites. Following this strategy, we demonstrate solar cells with maximum power conversion efficiency of 15.7% and stable power output over 15% under constant 0.81 V forward bias in simulated full sunlight. The surface passivation introduces an important direction for future progress in perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Self-citationStranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Self-citationSequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Self-citationLong-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Cited by
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Cavallo, G., Metrangolo, P., Milani, R., Pilati, T., Priimagi, A., Resnati, G., & Terraneo, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00484 · Cited by 4,035
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Self-citationZheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Self-citationOrganic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Brenner, T. M., Egger, D. A., Kronik, L., Hodes, G., & Cahen, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.7 · Cited by 1,557
Halide perovskite materials for solar cells: a theoretical review
Yin, W.-J., Yang, J.-H., Kang, J., Yan, Y., & Wei, S.-H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05033a · Cited by 1,437
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Self-citationUnder the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
Chen, Q., De Marco, N., Yang, Y. (., Song, T.-B., Chen, C.-C., Zhao, H., Hong, Z., Zhou, H., & Yang, Y. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.009 · Cited by 1,154
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes
Xu, J., Buin, A., Ip, A. H., Li, W., Voznyy, O., Comin, R., Yuan, M., Jeon, S., Ning, Z., McDowell, J. J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8081 · Cited by 1,124
All-perovskite tandem solar cells with improved grain surface passivation
Lin, R., Xu, J., Wei, M., Wang, Y., Qin, Z., Liu, Z., Wu, J., Xiao, K., Chen, B., Park, S. M., et al. (2022) · Nature · doi:10.1038/s41586-021-04372-8 · Cited by 1,085
Ahmadi, M., Wu, T., & Hu, B. (2017) · Advanced Materials · doi:10.1002/adma.201605242 · Cited by 820
Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity
Hui, W., Chao, L., Lu, H., Xia, F., Wei, Q., Su, Z., Niu, T., Tao, L., Du, B., Li, D., et al. (2021) · Science · doi:10.1126/science.abf7652 · Cited by 806
Tuning the Luminescence of Layered Halide Perovskites
Smith, M. D., Connor, B. A., & Karunadasa, H. I. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00477 · Cited by 802
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Stable High‐Performance Perovskite Solar Cells via Grain Boundary Passivation
Niu, T., Lu, J., Munir, R., Li, J., Barrit, D., Zhang, X., Hu, H., Yang, Z., Amassian, A., Zhao, K., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706576 · Cited by 797
Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells
Gao, F., Zhao, Y., Zhang, X., & You, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902650 · Cited by 782
Zhang, W., Pathak, S., Sakai, N., Stergiopoulos, T., Nayak, P. K., Noel, N. K., Haghighirad, A. A., Burlakov, V. M., deQuilettes, D. W., Sadhanala, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms10030 · Cited by 766
Self-citationCauses and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Heterojunction Modification for Highly Efficient Organic–Inorganic Perovskite Solar Cells
Wojciechowski, K., Stranks, S. D., Abate, A., Sadoughi, G., Sadhanala, A., Kopidakis, N., Rumbles, G., Li, C.-Z., Friend, R. H., Jen, A. K.-Y., et al. (2014) · ACS Nano · doi:10.1021/nn505723h · Cited by 677
Self-citationLin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability
Dai, Z., Yadavalli, S. K., Chen, M., Abbaspourtamijani, A., Qi, Y., & Padture, N. P. (2021) · Science · doi:10.1126/science.abf5602 · Cited by 625
Wang, F., Geng, W., Zhou, Y., Fang, H., Tong, C., Loi, M. A., Liu, L., & Zhao, N. (2016) · Advanced Materials · doi:10.1002/adma.201603062 · Cited by 624
Molecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the A Cation and X Anion
Wang, Z., Shi, Z., Li, T., Chen, Y., & Huang, W. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201603694 · Cited by 595
It's a trap! On the nature of localised states and charge trapping in lead halide perovskites
Jin, H., Debroye, E., Keshavarz, M., Scheblykin, I. G., Roeffaers, M. B. J., Hofkens, J., & Steele, J. A. (2020) · Materials Horizons · doi:10.1039/c9mh00500e · Cited by 589
The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication
Eperon, G. E., Habisreutinger, S. N., Leijtens, T., Bruijnaers, B. J., van Franeker, J. J., deQuilettes, D. W., Pathak, S., Sutton, R. J., Grancini, G., Ginger, D. S., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b03626 · Cited by 574
Self-citationDefects engineering for high-performance perovskite solar cells
Wang, F., Bai, S., Tress, W., Hagfeldt, A., & Gao, F. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0035-z · Cited by 568
De Marco, N., Zhou, H., Chen, Q., Sun, P., Liu, Z., Meng, L., Yao, E.-P., Liu, Y., Schiffer, A., & Yang, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04060 · Cited by 564
Halide Perovskites: Is It All about the Interfaces?
Schulz, P., Cahen, D., & Kahn, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00558 · Cited by 558
Enhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures
Lin, Y., Bai, Y., Fang, Y., Chen, Z., Yang, S., Zheng, X., Tang, S., Liu, Y., Zhao, J., & Huang, J. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02679 · Cited by 554
Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Li, Y., Zhao, Y., Chen, Q., Yang, Y. (., Liu, Y., Hong, Z., Liu, Z., Hsieh, Y.-T., Meng, L., Li, Y., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10614 · Cited by 539
Li, L., Wang, Y., Wang, X., Lin, R., Luo, X., Liu, Z., Zhou, K., Xiong, S., Bao, Q., Chen, G., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01045-2 · Cited by 534
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Tress, W., Marinova, N., Inganäs, O., Nazeeruddin, M. K., Zakeeruddin, S. M., & Graetzel, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400812 · Cited by 522
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Peng, J., Khan, J. I., Liu, W., Ugur, E., Duong, T., Wu, Y., Shen, H., Wang, K., Dang, H., Aydin, E., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801208 · Cited by 518
Frontiers, opportunities, and challenges in perovskite solar cells: A critical review
Ansari, M. I. H., Qurashi, A., & Nazeeruddin, M. K. (2018) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2017.11.002 · Cited by 485
The Role of the Interfaces in Perovskite Solar Cells
Shao, S., & Loi, M. A. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.201901469 · Cited by 477
Zeng, Q., Zhang, X., Feng, X., Lu, S., Chen, Z., Yong, X., Redfern, S. A. T., Wei, H., Wang, H., Shen, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705393 · Cited by 464
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells
Bi, E., Chen, H., Xie, F., Wu, Y., Chen, W., Su, Y., Islam, A., Grätzel, M., Yang, X., & Han, L. (2017) · Nature Communications · doi:10.1038/ncomms15330 · Cited by 451
Yang, G., Wang, C., Lei, H., Zheng, X., Qin, P., Xiong, L., Zhao, X., Yan, Y., & Fang, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08783c · Cited by 437
Pockett, A., Eperon, G. E., Peltola, T., Snaith, H. J., Walker, A., Peter, L. M., & Cameron, P. J. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp510837q · Cited by 426
Self-citationA Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
Fu, Y., Meng, F., Rowley, M. B., Thompson, B. J., Shearer, M. J., Ma, D., Hamers, R. J., Wright, J. C., & Jin, S. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02651 · Cited by 418
Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Self‐Assembled Monolayers as Interface Engineering Nanomaterials in Perovskite Solar Cells
Kim, S. Y., Cho, S. J., Byeon, S. E., He, X., & Yoon, H. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002606 · Cited by 404
Ye, S., Rao, H., Zhao, Z., Zhang, L., Bao, H., Sun, W., Li, Y., Gu, F., Wang, J., Liu, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01439 · Cited by 401
Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability
Tian, J., Xue, Q., Tang, X., Chen, Y., Li, N., Hu, Z., Shi, T., Wang, X., Huang, F., Brabec, C. J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901152 · Cited by 398
Interfaces in Perovskite Solar Cells
Shi, J., Xu, X., Li, D., & Meng, Q. (2015) · Small · doi:10.1002/smll.201403534 · Cited by 395
The surface of halide perovskites from nano to bulk
Xue, J., Wang, R., & Yang, Y. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0221-1 · Cited by 395
Gao, L., Zeng, K., Guo, J., Ge, C., Du, J., Zhao, Y., Chen, C., Deng, H., He, Y., Song, H., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03119 · Cited by 389
Achievements, challenges, and future prospects for industrialization of perovskite solar cells
Yang, C., Hu, W., Liu, J., Han, C., Gao, Q., Mei, A., Zhou, Y., Guo, F., & Han, H. (2024) · Light: Science & Applications · doi:10.1038/s41377-024-01461-x · Cited by 388
Formation of Surface Defects Dominates Ion Migration in Lead-Halide Perovskites
Meggiolaro, D., Mosconi, E., & De Angelis, F. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00247 · Cited by 386
Tailoring passivators for highly efficient and stable perovskite solar cells
Zhang, H., Pfeifer, L., Zakeeruddin, S. M., Chu, J., & Grätzel, M. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-023-00510-0 · Cited by 386
Zhao, T., Chueh, C.-C., Chen, Q., Rajagopal, A., & Jen, A. K.-Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00327 · Cited by 383
Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells
Liu, Z., Hu, J., Jiao, H., Li, L., Zheng, G., Chen, Y., Huang, Y., Zhang, Q., Shen, C., Chen, Q., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606774 · Cited by 383
Wu, T., Wang, Y., Li, X., Wu, Y., Meng, X., Cui, D., Yang, X., & Han, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803766 · Cited by 382
Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer
Guarnera, S., Abate, A., Zhang, W., Foster, J. M., Richardson, G., Petrozza, A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502703p · Cited by 381
Self-citationA review of aspects of additive engineering in perovskite solar cells
Mahapatra, A., Prochowicz, D., Tavakoli, M. M., Trivedi, S., Kumar, P., & Yadav, P. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07657c · Cited by 369
Rationalization of passivation strategies toward high-performance perovskite solar cells
Zhang, Z., Qiao, L., Meng, K., Long, R., Chen, G., & Gao, P. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00217e · Cited by 357
Liang, P., Chueh, C., Williams, S. T., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402321 · Cited by 353
Xu, L., Li, J., Cai, B., Song, J., Zhang, F., Fang, T., & Zeng, H. (2020) · Nature Communications · doi:10.1038/s41467-020-17633-3 · Cited by 351
Zhang, F., Bi, D., Pellet, N., Xiao, C., Li, Z., Berry, J. J., Zakeeruddin, S. M., Zhu, K., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02252f · Cited by 341
Maximizing the emissive properties of CH3NH3PbBr3 perovskite nanoparticles
Gonzalez-Carrero, S., Galian, R. E., & Pérez-Prieto, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05878j · Cited by 340
Luo, B., Pu, Y., Lindley, S. A., Yang, Y., Lu, L., Li, Y., Li, X., & Zhang, J. Z. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602236 · Cited by 334
Sun, C., Wu, Z., Yip, H., Zhang, H., Jiang, X., Xue, Q., Hu, Z., Hu, Z., Shen, Y., Wang, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501534 · Cited by 331
Defect Activity in Lead Halide Perovskites
Motti, S. G., Meggiolaro, D., Martani, S., Sorrentino, R., Barker, A. J., De Angelis, F., & Petrozza, A. (2019) · Advanced Materials · doi:10.1002/adma.201901183 · Cited by 331
Self-citationZhang, M., Chen, Q., Xue, R., Zhan, Y., Wang, C., Lai, J., Yang, J., Lin, H., Yao, J., Li, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12613-8 · Cited by 330
Li, X., Zhang, W., Wang, Y.-C., Zhang, W., Wang, H.-Q., & Fang, J. (2018) · Nature Communications · doi:10.1038/s41467-018-06204-2 · Cited by 329
Mohd Yusoff, A. R. B., Vasilopoulou, M., Georgiadou, D. G., Palilis, L. C., Abate, A., & Nazeeruddin, M. K. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00062d · Cited by 327
Self-citationYan, J., & Saunders, B. R. (2014) · RSC Adv. · doi:10.1039/c4ra07064j · Cited by 320
Cao, J., Jing, X., Yan, J., Hu, C., Chen, R., Yin, J., Li, J., & Zheng, N. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04924 · Cited by 320
Pseudohalide‐Induced Moisture Tolerance in Perovskite CH3NH3Pb(SCN)2I Thin Films
Jiang, Q., Rebollar, D., Gong, J., Piacentino, E. L., Zheng, C., & Xu, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503038 · Cited by 310
Chen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
Sanehira, E. M., Tremolet de Villers, B. J., Schulz, P., Reese, M. O., Ferrere, S., Zhu, K., Lin, L. Y., Berry, J. J., & Luther, J. M. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00013 · Cited by 285
Shape Evolution and Single Particle Luminescence of Organometal Halide Perovskite Nanocrystals
Zhu, F., Men, L., Guo, Y., Zhu, Q., Bhattacharjee, U., Goodwin, P. M., Petrich, J. W., Smith, E. A., & Vela, J. (2015) · ACS Nano · doi:10.1021/nn507020s · Cited by 276
Liu, B., Bi, H., He, D., Bai, L., Wang, W., Yuan, H., Song, Q., Su, P., Zang, Z., Zhou, T., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00794 · Cited by 276
Impact of Surfaces on Photoinduced Halide Segregation in Mixed-Halide Perovskites
Belisle, R. A., Bush, K. A., Bertoluzzi, L., Gold-Parker, A., Toney, M. F., & McGehee, M. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01562 · Cited by 275
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Formation of Thin Films of Organic–Inorganic Perovskites for High‐Efficiency Solar Cells
Stranks, S. D., Nayak, P. K., Zhang, W., Stergiopoulos, T., & Snaith, H. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410214 · Cited by 274
Self-citationLuo, J., Xia, J., Yang, H., Chen, L., Wan, Z., Han, F., Malik, H. A., Zhu, X., & Jia, C. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00036k · Cited by 271
O’Regan, B. C., Barnes, P. R. F., Li, X., Law, C., Palomares, E., & Marin-Beloqui, J. M. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00761 · Cited by 264
Fullerene derivative anchored SnO2 for high-performance perovskite solar cells
Liu, K., Chen, S., Wu, J., Zhang, H., Qin, M., Lu, X., Tu, Y., Meng, Q., & Zhan, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02172d · Cited by 261
Liang, L., Luo, H., Hu, J., Li, H., & Gao, P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000197 · Cited by 260
Yang, Z., Dou, J., Kou, S., Dang, J., Ji, Y., Yang, G., Wu, W., Kuang, D., & Wang, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910710 · Cited by 258
Tuning halide perovskite energy levels
Canil, L., Cramer, T., Fraboni, B., Ricciarelli, D., Meggiolaro, D., Singh, A., Liu, M., Rusu, M., Wolff, C. M., Phung, N., et al. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02216k · Cited by 258
Self-citationSolution Chemistry Engineering toward High-Efficiency Perovskite Solar Cells
Zhao, Y., & Zhu, K. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501983v · Cited by 257
Chen, J., Kim, S., & Park, N. (2018) · Advanced Materials · doi:10.1002/adma.201801948 · Cited by 254
Sharenko, A., & Toney, M. F. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10723 · Cited by 242
Passivation strategies for mitigating defect challenges in halide perovskite light-emitting diodes
Shen, X., Kang, K., Yu, Z., Jeong, W. H., Choi, H., Park, S. H., Stranks, S. D., Snaith, H. J., Friend, R. H., & Lee, B. R. (2023) · Joule · doi:10.1016/j.joule.2023.01.008 · Cited by 197
Self-citation
Metadata
- Authors
- Abate, A., Saliba, M., Hollman, D. J., Stranks, S. D., Wojciechowski, K., Avolio, R., Grancini, G., Petrozza, A., & Snaith, H. J.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-05-07
- Volume
- 14
- Issue
- 6
- Pages
- 3247-3254
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2048126895
- Cited by
- 774
- References
- 36
- FWCI
- 33.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.