The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Open accessAbstract
Creating a robust synthetic surface that repels various liquids would have broad technological implications for areas ranging from biomedical devices and fuel transport to architecture but has proved extremely challenging. Inspirations from natural nonwetting structures, particularly the leaves of the lotus, have led to the development of liquid-repellent microtextured surfaces that rely on the formation of a stable air–liquid interface. Despite over a decade of intense research, these surfaces are, however, still plagued with problems that restrict their practical applications: limited oleophobicity with high contact angle hysteresis, failure under pressure and upon physical damage, inability to self-heal and high production cost. To address these challenges, here we report a strategy to create self-healing, slippery liquid-infused porous surface(s) (SLIPS) with exceptional liquid- and ice-repellency, pressure stability and enhanced optical transparency. Our approach—inspired by Nepenthes pitcher plants—is conceptually different from the lotus effect, because we use nano/microstructured substrates to lock in place the infused lubricating fluid. We define the requirements for which the lubricant forms a stable, defect-free and inert ‘slippery’ interface. This surface outperforms its natural counterparts and state-of-the-art synthetic liquid-repellent surfaces in its capability to repel various simple and complex liquids (water, hydrocarbons, crude oil and blood), maintain low contact angle hysteresis (<2.5°), quickly restore liquid-repellency after physical damage (within 0.1–1 s), resist ice adhesion, and function at high pressures (up to about 680 atm). We show that these properties are insensitive to the precise geometry of the underlying substrate, making our approach applicable to various inexpensive, low-surface-energy structured materials (such as porous Teflon membrane). We envision that these slippery surfaces will be useful in fluid handling and transportation, optical sensing, medicine, and as self-cleaning and anti-fouling materials operating in extreme environments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
Designing Superoleophobic Surfaces
Tuteja, A., Choi, W., Ma, M., Mabry, J. M., Mazzella, S. A., Rutledge, G. C., McKinley, G. H., & Cohen, R. E. (2007) · Science · doi:10.1126/science.1148326 · Cited by 3,006
Quéré, D. (2008) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.38.060407.132434 · Cited by 2,691
Water-repellent legs of water striders
Gao, X., & Jiang, L. (2004) · Nature · doi:10.1038/432036a · Cited by 2,609
Capillarity and wetting phenomena: drops, bubbles, pearls, waves
(2004) · Choice Reviews Online · doi:10.5860/choice.41-5349 · Cited by 2,017
Quéré, D. (2005) · Reports on Progress in Physics · doi:10.1088/0034-4885/68/11/r01 · Cited by 1,249
Tuteja, A., Choi, W., Mabry, J. M., McKinley, G. H., & Cohen, R. E. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0804872105 · Cited by 1,191
Ultrahydrophobic and Ultralyophobic Surfaces: Some Comments and Examples
Chen, W., Fadeev, A. Y., Hsieh, M. C., Öner, D., Youngblood, J., & McCarthy, T. J. (1999) · Langmuir · doi:10.1021/la990074s · Cited by 1,190
Cited by
Items 101–161 of 161
Ma, Q., Cheng, H., Jang, K.-I., Luan, H., Hwang, K.-C., Rogers, J. A., Huang, Y., & Zhang, Y. (2016) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2016.02.012 · Cited by 309
Dynamic surface antifouling: mechanism and systems
Xie, Q., Pan, J., Ma, C., & Zhang, G. (2019) · Soft Matter · doi:10.1039/c8sm01853g · Cited by 309
Clam's Shell Inspired High‐Energy Inorganic Coatings with Underwater Low Adhesive Superoleophobicity
Liu, X., Zhou, J., Xue, Z., Gao, J., Meng, J., Wang, S., & Jiang, L. (2012) · Advanced Materials · doi:10.1002/adma.201200797 · Cited by 307
Long, Y., Yin, X., Mu, P., Wang, Q., Hu, J., & Li, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126137 · Cited by 307
Specially Wettable Membranes for Oil–Water Separation
Wei, Y., Qi, H., Gong, X., & Zhao, S. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800576 · Cited by 304
Design of omniphobic interfaces for membrane distillation – A review
Lu, K. J., Chen, Y., & Chung, T.-S. (2019) · Water Research · doi:10.1016/j.watres.2019.06.056 · Cited by 304
Sun, Y., & Guo, Z. (2019) · Nanoscale Horizons · doi:10.1039/c8nh00223a · Cited by 302
Hydrophobic Metal–Organic Frameworks
Jayaramulu, K., Geyer, F., Schneemann, A., Kment, Š., Otyepka, M., Zboril, R., Vollmer, D., & Fischer, R. A. (2019) · Advanced Materials · doi:10.1002/adma.201900820 · Cited by 301
Cui, J., Daniel, D., Grinthal, A., Lin, K., & Aizenberg, J. (2015) · Nature Materials · doi:10.1038/nmat4325 · Cited by 299
Self-citationSelf-assembly of nanostructures towards transparent, superhydrophobic surfaces
Rahmawan, Y., Xu, L., & Yang, S. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00288d · Cited by 299
Urata, C., Dunderdale, G. J., England, M. W., & Hozumi, A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02690c · Cited by 297
Omniphobic liquid-like surfaces
Chen, L., Huang, S., Ras, R. H. A., & Tian, X. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00455-w · Cited by 297
Durable superhydrophobic and superamphiphobic polymeric surfaces and their applications: A review
Ellinas, K., Tserepi, A., & Gogolides, E. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.09.003 · Cited by 295
Fundamentals of icing and common strategies for designing biomimetic anti-icing surfaces
Li, Q., & Guo, Z. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03259a · Cited by 292
Liquid-Infused Silicone As a Biofouling-Free Medical Material
MacCallum, N., Howell, C., Kim, P., Sun, D., Friedlander, R., Ranisau, J., Ahanotu, O., Lin, J. J., Vena, A., Hatton, B., et al. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/ab5000578 · Cited by 289
Self-citationSlippery Liquid-Infused Porous Surfaces Showing Marine Antibiofouling Properties
Xiao, L., Li, J., Mieszkin, S., Di Fino, A., Clare, A. S., Callow, M. E., Callow, J. A., Grunze, M., Rosenhahn, A., & Levkin, P. A. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402635p · Cited by 289
Magnetic slippery extreme icephobic surfaces
Irajizad, P., Hasnain, M., Farokhnia, N., Sajadi, S. M., & Ghasemi, H. (2016) · Nature Communications · doi:10.1038/ncomms13395 · Cited by 284
Bioinspired Superwettability Electrospun Micro/Nanofibers and Their Applications
Hou, L., Wang, N., Wu, J., Cui, Z., Jiang, L., & Zhao, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801114 · Cited by 284
Wang, C., Liu, Y., Qu, X., Shi, B., Zheng, Q., Lin, X., Chao, S., Wang, C., Zhou, J., Sun, Y., et al. (2022) · Advanced Materials · doi:10.1002/adma.202105416 · Cited by 282
A colloidoscope of colloid-based porous materials and their uses
Phillips, K. R., England, G. T., Sunny, S., Shirman, E., Shirman, T., Vogel, N., & Aizenberg, J. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00533g · Cited by 282
Self-citationLiquid-Vapor Phase-Change Heat Transfer on Functionalized Nanowired Surfaces and Beyond
Wen, R., Ma, X., Lee, Y.-C., & Yang, R. (2018) · Joule · doi:10.1016/j.joule.2018.08.014 · Cited by 280
Dropwise Condensation on Micro- and Nanostructured Surfaces
Enright, R., Miljkovic, N., Alvarado, J. L., Kim, K., & Rose, J. W. (2014) · Nanoscale and Microscale Thermophysical Engineering · doi:10.1080/15567265.2013.862889 · Cited by 278
Smart Gating Multi‐Scale Pore/Channel‐Based Membranes
Hou, X. (2016) · Advanced Materials · doi:10.1002/adma.201600797 · Cited by 274
Zhang, J., Gu, C., & Tu, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00972 · Cited by 274
Latthe, S. S., Sutar, R. S., Bhosale, A. K., Nagappan, S., Ha, C.-S., Sadasivuni, K. K., Liu, S., & Xing, R. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.105373 · Cited by 273
Directional liquid dynamics of interfaces with superwettability
Dai, H., Dong, Z., & Jiang, L. (2020) · Science Advances · doi:10.1126/sciadv.abb5528 · Cited by 273
Dropwise condensation on solid hydrophilic surfaces
Cha, H., Vahabi, H., Wu, A., Chavan, S., Kim, M.-K., Sett, S., Bosch, S. A., Wang, W., Kota, A. K., & Miljkovic, N. (2020) · Science Advances · doi:10.1126/sciadv.aax0746 · Cited by 271
Review of polymer technologies for improving the recycling and upcycling efficiency of plastic waste
Jung, H., Shin, G., Kwak, H., Hao, L. T., Jegal, J., Kim, H. J., Jeon, H., Park, J., & Oh, D. X. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138089 · Cited by 271
Superhydrophobic Coatings on Cellulose‐Based Materials: Fabrication, Properties, and Applications
Teisala, H., Tuominen, M., & Kuusipalo, J. (2014) · Advanced Materials Interfaces · doi:10.1002/admi.201300026 · Cited by 270
Bixler, G. D., & Bhushan, B. (2013) · Nanoscale · doi:10.1039/c3nr01710a · Cited by 270
Desert Beetle‐Inspired Superwettable Patterned Surfaces for Water Harvesting
Yu, Z., Yun, F. F., Wang, Y., Yao, L., Dou, S., Liu, K., Jiang, L., & Wang, X. (2017) · Small · doi:10.1002/smll.201701403 · Cited by 270
Special oleophobic and hydrophilic surfaces: approaches, mechanisms, and applications
Wang, Y., & Gong, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10474f · Cited by 267
Designing Bioinspired Anti‐Biofouling Surfaces based on a Superwettability Strategy
Zhang, P., Lin, L., Zang, D., Guo, X., & Liu, M. (2017) · Small · doi:10.1002/smll.201503334 · Cited by 266
Bae, W., Kim, H. N., Kim, D., Park, S., Jeong, H. E., & Suh, K. (2014) · Advanced Materials · doi:10.1002/adma.201303412 · Cited by 265
Lai, Y., Pan, F., Xu, C., Fuchs, H., & Chi, L. (2013) · Advanced Materials · doi:10.1002/adma.201203797 · Cited by 264
Slippery Lubricant‐Infused Surfaces: Properties and Emerging Applications
Li, J., Ueda, E., Paulssen, D., & Levkin, P. A. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201802317 · Cited by 264
Immersion Condensation on Oil-Infused Heterogeneous Surfaces for Enhanced Heat Transfer
Xiao, R., Miljkovic, N., Enright, R., & Wang, E. N. (2013) · Scientific Reports · doi:10.1038/srep01988 · Cited by 264
Filefish‐Inspired Surface Design for Anisotropic Underwater Oleophobicity
Cai, Y., Lin, L., Xue, Z., Liu, M., Wang, S., & Jiang, L. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302034 · Cited by 262
Huang, X., Tepylo, N., Pommier-Budinger, V., Budinger, M., Bonaccurso, E., Villedieu, P., & Bennani, L. (2019) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2019.01.002 · Cited by 262
Ice-phobic Coatings Based on Silicon-Oil-Infused Polydimethylsiloxane
Zhu, L., Xue, J., Wang, Y., Chen, Q., Ding, J., & Wang, Q. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400704z · Cited by 261
A Statically Oleophilic but Dynamically Oleophobic Smooth Nonperfluorinated Surface
Cheng, D. F., Urata, C., Yagihashi, M., & Hozumi, A. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201108800 · Cited by 260
Rational nanostructuring of surfaces for extraordinary icephobicity
Eberle, P., Tiwari, M. K., Maitra, T., & Poulikakos, D. (2014) · Nanoscale · doi:10.1039/c3nr06644d · Cited by 260
The springtail cuticle as a blueprint for omniphobic surfaces
Hensel, R., Neinhuis, C., & Werner, C. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00438a · Cited by 259
Dai, X., Stogin, B. B., Yang, S., & Wong, T.-S. (2015) · ACS Nano · doi:10.1021/acsnano.5b04151 · Cited by 258
Self-citationBioinspired Materials: from Low to High Dimensional Structure
Zhao, N., Wang, Z., Cai, C., Shen, H., Liang, F., Wang, D., Wang, C., Zhu, T., Guo, J., Wang, Y., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401718 · Cited by 258
Bioinspired Multifunctional Anti-icing Hydrogel
He, Z., Wu, C., Hua, M., Wu, S., Wu, D., Zhu, X., Wang, J., & He, X. (2020) · Matter · doi:10.1016/j.matt.2019.12.017 · Cited by 257
Superhydrophobic coatings for corrosion protection of magnesium alloys
Yao, W., Liang, W., Huang, G., Jiang, B., Atrens, A., & Pan, F. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.02.055 · Cited by 257
Chen, L., Duan, Y., Cui, M., Huang, R., Su, R., Qi, W., & He, Z. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144469 · Cited by 256
Yin, X., Zhang, Y., Wang, D., Liu, Z., Liu, Y., Pei, X., Yu, B., & Zhou, F. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501101 · Cited by 253
Arzt, E., Quan, H., McMeeking, R. M., & Hensel, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100823 · Cited by 253
Rasitha, T. P., Krishna, N. G., Anandkumar, B., Vanithakumari, S. C., & Philip, J. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103090 · Cited by 253
Frosting characteristics on hydrophobic and superhydrophobic surfaces: A review
Kim, M.-H., Kim, H., Lee, K.-S., & Kim, D. R. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.067 · Cited by 171
Current developments in antimicrobial surface coatings for biomedical applications
Swartjes, J. J. T. M., Sharma, P. K., Kooten, T. G., Mei, H. C., Mahmoudi, M., Busscher, H. J., & Rochford, E. T. J. (2015) · Current Medicinal Chemistry · doi:10.2174/0929867321666140916121355 · Cited by 149
“surface based on an epoxy-resin could be infused with the same perfluorinated liquids to obtain a similar anti-adhesiveness and even demonstrating self-repairing behavior after physical damage [110].”
BackgroundRecent progress in the anti-icing performance of slippery liquid-infused surfaces
Heydarian, S., Jafari, R., & Momen, G. (2021) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.106096 · Cited by 117
Liu, Q., Wang, X., Yu, B., Zhou, F., & Xue, Q. (2012) · Langmuir · doi:10.1021/la300187q · Cited by 103
Condensation frosting and passive anti-frosting
Yang, S., Wu, C., Zhao, G., Sun, J., Yao, X., Ma, X., & Wang, Z. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100474 · Cited by 92
Taliantzis, K., & Ellinas, K. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103566 · Cited by 83
Ma, L., Zhang, Z., Gao, L., Liu, Y., & Hu, H. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.10.013 · Cited by 62
Bioinspired Gas Manipulation for Regulating Multiphase Interactions in Electrochemistry
Long, Z., Yu, C., Cao, M., Ma, J., & Jiang, L. (2024) · Advanced Materials · doi:10.1002/adma.202312179 · Cited by 55
Heu, C. S., Kim, S. W., Kim, J., Lee, S., Kim, J. M., Lee, K.-S., & Kim, D. R. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.146 · Cited by 45
Economics of Snow Accumulation on Photovoltaic Modules
Abou Yassine, A. H., Khoshbakhtnejad, E., & Sojoudi, H. (2024) · Energies · doi:10.3390/en17122962 · Cited by 24
Metadata
- Authors
- Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A., & Aizenberg, J.
- Venue
- Nature
- Published
- 2011-09
- Volume
- 477
- Issue
- 7365
- Pages
- 443-447
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2044670534
- Cited by
- 4,134
- References
- 27
- FWCI
- 45.59
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.