The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Open accessAbstract
Creating a robust synthetic surface that repels various liquids would have broad technological implications for areas ranging from biomedical devices and fuel transport to architecture but has proved extremely challenging. Inspirations from natural nonwetting structures, particularly the leaves of the lotus, have led to the development of liquid-repellent microtextured surfaces that rely on the formation of a stable air–liquid interface. Despite over a decade of intense research, these surfaces are, however, still plagued with problems that restrict their practical applications: limited oleophobicity with high contact angle hysteresis, failure under pressure and upon physical damage, inability to self-heal and high production cost. To address these challenges, here we report a strategy to create self-healing, slippery liquid-infused porous surface(s) (SLIPS) with exceptional liquid- and ice-repellency, pressure stability and enhanced optical transparency. Our approach—inspired by Nepenthes pitcher plants—is conceptually different from the lotus effect, because we use nano/microstructured substrates to lock in place the infused lubricating fluid. We define the requirements for which the lubricant forms a stable, defect-free and inert ‘slippery’ interface. This surface outperforms its natural counterparts and state-of-the-art synthetic liquid-repellent surfaces in its capability to repel various simple and complex liquids (water, hydrocarbons, crude oil and blood), maintain low contact angle hysteresis (<2.5°), quickly restore liquid-repellency after physical damage (within 0.1–1 s), resist ice adhesion, and function at high pressures (up to about 680 atm). We show that these properties are insensitive to the precise geometry of the underlying substrate, making our approach applicable to various inexpensive, low-surface-energy structured materials (such as porous Teflon membrane). We envision that these slippery surfaces will be useful in fluid handling and transportation, optical sensing, medicine, and as self-cleaning and anti-fouling materials operating in extreme environments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
Designing Superoleophobic Surfaces
Tuteja, A., Choi, W., Ma, M., Mabry, J. M., Mazzella, S. A., Rutledge, G. C., McKinley, G. H., & Cohen, R. E. (2007) · Science · doi:10.1126/science.1148326 · Cited by 3,006
Quéré, D. (2008) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.38.060407.132434 · Cited by 2,691
Water-repellent legs of water striders
Gao, X., & Jiang, L. (2004) · Nature · doi:10.1038/432036a · Cited by 2,609
Capillarity and wetting phenomena: drops, bubbles, pearls, waves
(2004) · Choice Reviews Online · doi:10.5860/choice.41-5349 · Cited by 2,017
Quéré, D. (2005) · Reports on Progress in Physics · doi:10.1088/0034-4885/68/11/r01 · Cited by 1,249
Tuteja, A., Choi, W., Mabry, J. M., McKinley, G. H., & Cohen, R. E. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0804872105 · Cited by 1,191
Ultrahydrophobic and Ultralyophobic Surfaces: Some Comments and Examples
Chen, W., Fadeev, A. Y., Hsieh, M. C., Öner, D., Youngblood, J., & McCarthy, T. J. (1999) · Langmuir · doi:10.1021/la990074s · Cited by 1,190
Cited by
Robust self-cleaning surfaces that function when exposed to either air or oil
Lu, Y., Sathasivam, S., Song, J., Crick, C. R., Carmalt, C. J., & Parkin, I. P. (2015) · Science · doi:10.1126/science.aaa0946 · Cited by 1,808
Nature-inspired superwettability systems
Liu, M., Wang, S., & Jiang, L. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.36 · Cited by 1,726
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
Wang, S., Liu, K., Yao, X., & Jiang, L. (2015) · Chemical Reviews · doi:10.1021/cr400083y · Cited by 1,646
Design of anti-icing surfaces: smooth, textured or slippery?
Kreder, M. J., Alvarenga, J., Kim, P., & Aizenberg, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.3 · Cited by 1,505
Self-citationTee, B. C.-K., Wang, C., Allen, R., & Bao, Z. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.192 · Cited by 1,419
Liquid-Infused Nanostructured Surfaces with Extreme Anti-Ice and Anti-Frost Performance
Kim, P., Wong, T.-S., Alvarenga, J., Kreder, M. J., Adorno-Martinez, W. E., & Aizenberg, J. (2012) · ACS Nano · doi:10.1021/nn302310q · Cited by 1,316
Self-citationWang, C., Wu, H., Chen, Z., McDowell, M. T., Cui, Y., & Bao, Z. (2013) · Nature Chemistry · doi:10.1038/nchem.1802 · Cited by 1,269
Continuous directional water transport on the peristome surface of Nepenthes alata
Chen, H., Zhang, P., Zhang, L., Liu, H., Jiang, Y., Zhang, D., Han, Z., & Jiang, L. (2016) · Nature · doi:10.1038/nature17189 · Cited by 1,261
Bioinspired Interfaces with Superwettability: From Materials to Chemistry
Su, B., Tian, Y., & Jiang, L. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12728 · Cited by 1,159
Turning a surface superrepellent even to completely wetting liquids
Liu, T. “., & Kim, C.-J. “. (2014) · Science · doi:10.1126/science.1254787 · Cited by 1,149
Bio-Inspired Strategies for Anti-Icing
Lv, J., Song, Y., Jiang, L., & Wang, J. (2014) · ACS Nano · doi:10.1021/nn406522n · Cited by 1,009
Droplet mobility on lubricant-impregnated surfaces
Smith, J. D., Dhiman, R., Anand, S., Reza-Garduno, E., Cohen, R. E., McKinley, G. H., & Varanasi, K. K. (2013) · Soft Matter · doi:10.1039/c2sm27032c · Cited by 994
Liquid-infused structured surfaces with exceptional anti-biofouling performance
Epstein, A. K., Wong, T.-S., Belisle, R. A., Boggs, E. M., & Aizenberg, J. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1201973109 · Cited by 928
Self-citationCondensation on slippery asymmetric bumps
Park, K.-C., Kim, P., Grinthal, A., He, N., Fox, D., Weaver, J. C., & Aizenberg, J. (2016) · Nature · doi:10.1038/nature16956 · Cited by 889
Self-citationSurface nanobubbles and nanodroplets
Lohse, D., & Zhang, X. (2015) · Reviews of Modern Physics · doi:10.1103/revmodphys.87.981 · Cited by 858
Nishimoto, S., & Bhushan, B. (2013) · RSC Adv. · doi:10.1039/c2ra21260a · Cited by 840
Yong, J., Chen, F., Yang, Q., Huo, J., & Hou, X. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00751a · Cited by 810
A bioinspired omniphobic surface coating on medical devices prevents thrombosis and biofouling
Leslie, D. C., Waterhouse, A., Berthet, J. B., Valentin, T. M., Watters, A. L., Jain, A., Kim, P., Hatton, B. D., Nedder, A., Donovan, K., et al. (2014) · Nature Biotechnology · doi:10.1038/nbt.3020 · Cited by 758
Self-citationRecent Developments and Practical Feasibility of Polymer‐Based Antifouling Coatings
Maan, A. M. C., Hofman, A. H., de Vos, W. M., & Kamperman, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000936 · Cited by 725
Carbon Nanotubes and Graphene for Flexible Electrochemical Energy Storage: from Materials to Devices
Wen, L., Li, F., & Cheng, H. (2016) · Advanced Materials · doi:10.1002/adma.201504225 · Cited by 711
Ultrasensitive surface-enhanced Raman scattering detection in common fluids
Yang, S., Dai, X., Stogin, B. B., & Wong, T.-S. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518980113 · Cited by 704
Self-citationDesigning durable icephobic surfaces
Golovin, K., Kobaku, S. P. R., Lee, D. H., DiLoreto, E. T., Mabry, J. M., & Tuteja, A. (2016) · Science Advances · doi:10.1126/sciadv.1501496 · Cited by 686
Si, Y., Fu, Q., Wang, X., Zhu, J., Yu, J., Sun, G., & Ding, B. (2015) · ACS Nano · doi:10.1021/nn506633b · Cited by 677
Ge, J., Zong, D., Jin, Q., Yu, J., & Ding, B. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705051 · Cited by 677
Bioinspired Super‐Wettability from Fundamental Research to Practical Applications
Wen, L., Tian, Y., & Jiang, L. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409911 · Cited by 673
Nanoengineered materials for liquid–vapour phase-change heat transfer
Cho, H. J., Preston, D. J., Zhu, Y., & Wang, E. N. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.92 · Cited by 657
Surface charge printing for programmed droplet transport
Sun, Q., Wang, D., Li, Y., Zhang, J., Ye, S., Cui, J., Chen, L., Wang, Z., Butt, H.-J., Vollmer, D., et al. (2019) · Nature Materials · doi:10.1038/s41563-019-0440-2 · Cited by 631
Enhanced Condensation on Lubricant-Impregnated Nanotextured Surfaces
Anand, S., Paxson, A. T., Dhiman, R., Smith, J. D., & Varanasi, K. K. (2012) · ACS Nano · doi:10.1021/nn303867y · Cited by 630
Wang, Z., Cousins, I. T., Scheringer, M., & Hungerbuehler, K. (2015) · Environment International · doi:10.1016/j.envint.2014.11.013 · Cited by 627
Chu, Z., & Seeger, S. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60415b · Cited by 621
Bioinspired marine antifouling coatings: Status, prospects, and future
Jin, H., Tian, L., Bing, W., Zhao, J., & Ren, L. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100889 · Cited by 585
A Transparent, Self‐Healing, Highly Stretchable Ionic Conductor
Cao, Y., Morrissey, T. G., Acome, E., Allec, S. I., Wong, B. M., Keplinger, C., & Wang, C. (2017) · Advanced Materials · doi:10.1002/adma.201605099 · Cited by 574
Bio-Inspired Titanium Dioxide Materials with Special Wettability and Their Applications
Liu, K., Cao, M., Fujishima, A., & Jiang, L. (2014) · Chemical Reviews · doi:10.1021/cr4006796 · Cited by 571
Superhydrophobic materials and coatings: a review
Simpson, J. T., Hunter, S. R., & Aytug, T. (2015) · Reports on Progress in Physics · doi:10.1088/0034-4885/78/8/086501 · Cited by 570
Bio-inspired superoleophobic and smart materials: Design, fabrication, and application
Liu, K., Tian, Y., & Jiang, L. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.11.001 · Cited by 570
A swarm of slippery micropropellers penetrates the vitreous body of the eye
Wu, Z., Troll, J., Jeong, H.-H., Wei, Q., Stang, M., Ziemssen, F., Wang, Z., Dong, M., Schnichels, S., Qiu, T., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat4388 · Cited by 567
Stabilization of Leidenfrost vapour layer by textured superhydrophobic surfaces
Vakarelski, I. U., Patankar, N. A., Marston, J. O., Chan, D. Y. C., & Thoroddsen, S. T. (2012) · Nature · doi:10.1038/nature11418 · Cited by 564
Adaptive fluid-infused porous films with tunable transparency and wettability
Yao, X., Hu, Y., Grinthal, A., Wong, T.-S., Mahadevan, L., & Aizenberg, J. (2013) · Nature Materials · doi:10.1038/nmat3598 · Cited by 553
Self-citationHydrophilic directional slippery rough surfaces for water harvesting
Dai, X., Sun, N., Nielsen, S. O., Stogin, B. B., Wang, J., Yang, S., & Wong, T.-S. (2018) · Science Advances · doi:10.1126/sciadv.aaq0919 · Cited by 553
Self-citationPreventing mussel adhesion using lubricant-infused materials
Amini, S., Kolle, S., Petrone, L., Ahanotu, O., Sunny, S., Sutanto, C. N., Hoon, S., Cohen, L., Weaver, J. C., Aizenberg, J., et al. (2017) · Science · doi:10.1126/science.aai8977 · Cited by 534
Self-citationSoft network composite materials with deterministic and bio-inspired designs
Jang, K.-I., Chung, H. U., Xu, S., Lee, C. H., Luan, H., Jeong, J., Cheng, H., Kim, G.-T., Han, S. Y., Lee, J. W., et al. (2015) · Nature Communications · doi:10.1038/ncomms7566 · Cited by 533
Slippery pre-suffused surfaces
Lafuma, A., & Quéré, D. (2011) · EPL (Europhysics Letters) · doi:10.1209/0295-5075/96/56001 · Cited by 530
Kim, P., Kreder, M. J., Alvarenga, J., & Aizenberg, J. (2013) · Nano Letters · doi:10.1021/nl4003969 · Cited by 520
Self-citationInterfacial Material System Exhibiting Superwettability
Tian, Y., Su, B., & Jiang, L. (2014) · Advanced Materials · doi:10.1002/adma.201400883 · Cited by 519
Bioinspired wood nanotechnology for functional materials
Berglund, L. A., & Burgert, I. (2018) · Advanced Materials · doi:10.1002/adma.201704285 · Cited by 518
Engineering Immunomodulatory Biomaterials To Tune the Inflammatory Response
Vishwakarma, A., Bhise, N. S., Evangelista, M. B., Rouwkema, J., Dokmeci, M. R., Ghaemmaghami, A. M., Vrana, N. E., & Khademhosseini, A. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.009 · Cited by 517
Bio-Inspired Self-Cleaning Surfaces
Liu, K., & Jiang, L. (2012) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070511-155046 · Cited by 515
Plant Surfaces: Structures and Functions for Biomimetic Innovations
Barthlott, W., Mail, M., Bhushan, B., & Koch, K. (2017) · Nano-Micro Letters · doi:10.1007/s40820-016-0125-1 · Cited by 509
Robust superhydrophobic TiO2@fabrics for UV shielding, self-cleaning and oil–water separation
Huang, J. Y., Li, S. H., Ge, M. Z., Wang, L. N., Xing, T. L., Chen, G. Q., Liu, X. F., Al-Deyab, S. S., Zhang, K. Q., Chen, T., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05332j · Cited by 504
Multifunctional “Hydrogel Skins” on Diverse Polymers with Arbitrary Shapes
Yu, Y., Yuk, H., Parada, G. A., Wu, Y., Liu, X., Nabzdyk, C. S., Youcef‐Toumi, K., Zang, J., & Zhao, X. (2019) · Advanced Materials · doi:10.1002/adma.201807101 · Cited by 482
Liquid-Infused Surfaces: A Review of Theory, Design, and Applications
Villegas, M., Zhang, Y., Abu Jarad, N., Soleymani, L., & Didar, T. F. (2019) · ACS Nano · doi:10.1021/acsnano.9b04129 · Cited by 459
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
Walker, D. A., Hedrick, J. L., & Mirkin, C. A. (2019) · Science · doi:10.1126/science.aax1562 · Cited by 459
Why Superhydrophobic Surfaces Are Not Always Icephobic
Nosonovsky, M., & Hejazi, V. (2012) · ACS Nano · doi:10.1021/nn302138r · Cited by 444
Nano/Micro‐Manufacturing of Bioinspired Materials: a Review of Methods to Mimic Natural Structures
Zhang, C., Mcadams, D. A., & Grunlan, J. C. (2016) · Advanced Materials · doi:10.1002/adma.201505555 · Cited by 443
Vogel, N., Belisle, R. A., Hatton, B., Wong, T.-S., & Aizenberg, J. (2013) · Nature Communications · doi:10.1038/ncomms3176 · Cited by 439
Self-citationYao, L., & He, J. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.12.003 · Cited by 435
Polymers with autonomous life-cycle control
Patrick, J. F., Robb, M. J., Sottos, N. R., Moore, J. S., & White, S. R. (2016) · Nature · doi:10.1038/nature21002 · Cited by 434
Imani, S. M., Ladouceur, L., Marshall, T., Maclachlan, R., Soleymani, L., & Didar, T. F. (2020) · ACS Nano · doi:10.1021/acsnano.0c05937 · Cited by 433
Dynamically reconfigurable complex emulsions via tunable interfacial tensions
Zarzar, L. D., Sresht, V., Sletten, E. M., Kalow, J. A., Blankschtein, D., & Swager, T. M. (2015) · Nature · doi:10.1038/nature14168 · Cited by 430
Towards High‐Performance Bioinspired Composites
Studart, A. R. (2012) · Advanced Materials · doi:10.1002/adma.201201471 · Cited by 429
The design and applications of superomniphobic surfaces
Kota, A. K., Kwon, G., & Tuteja, A. (2014) · NPG Asia Materials · doi:10.1038/am.2014.34 · Cited by 426
Tesler, A. B., Kim, P., Kolle, S., Howell, C., Ahanotu, O., & Aizenberg, J. (2015) · Nature Communications · doi:10.1038/ncomms9649 · Cited by 418
Self-citationZhang, P., & Lv, F. Y. (2015) · Energy · doi:10.1016/j.energy.2015.01.061 · Cited by 418
A Robust Polyionized Hydrogel with an Unprecedented Underwater Anti‐Crude‐Oil‐Adhesion Property
Gao, S., Sun, J., Liu, P., Zhang, F., Zhang, W., Yuan, S., Li, J., & Jin, J. (2016) · Advanced Materials · doi:10.1002/adma.201600417 · Cited by 412
Condensation heat transfer on superhydrophobic surfaces
Miljkovic, N., & Wang, E. N. (2013) · MRS Bulletin · doi:10.1557/mrs.2013.103 · Cited by 410
Direct observation of drops on slippery lubricant-infused surfaces
Schellenberger, F., Xie, J., Encinas, N., Hardy, A., Klapper, M., Papadopoulos, P., Butt, H.-J., & Vollmer, D. (2015) · Soft Matter · doi:10.1039/c5sm01809a · Cited by 402
Coatings super-repellent to ultralow surface tension liquids
Pan, S., Guo, R., Björnmalm, M., Richardson, J. J., Li, L., Peng, C., Bertleff-Zieschang, N., Xu, W., Jiang, J., & Caruso, F. (2018) · Nature Materials · doi:10.1038/s41563-018-0178-2 · Cited by 402
Lee, H. A., Park, E., & Lee, H. (2020) · Advanced Materials · doi:10.1002/adma.201907505 · Cited by 401
A Mechanically and Electrically Self‐Healing Supercapacitor
Wang, H., Zhu, B., Jiang, W., Yang, Y., Leow, W. R., Wang, H., & Chen, X. (2014) · Advanced Materials · doi:10.1002/adma.201305682 · Cited by 396
Superhydrophobic photothermal icephobic surfaces based on candle soot
Wu, S., Du, Y., Alsaid, Y., Wu, D., Hua, M., Yan, Y., Yao, B., Ma, Y., Zhu, X., & He, X. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2001972117 · Cited by 395
Butt, H.-J., Liu, J., Koynov, K., Straub, B., Hinduja, C., Roismann, I., Berger, R., Li, X., Vollmer, D., Steffen, W., et al. (2022) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2022.101574 · Cited by 392
Robust and durable liquid-repellent surfaces
Chen, F., Wang, Y., Tian, Y., Zhang, D., Song, J., Crick, C. R., Carmalt, C. J., Parkin, I. P., & Lu, Y. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01033b · Cited by 378
Mechanism of Frost Formation on Lubricant-Impregnated Surfaces
Rykaczewski, K., Anand, S., Subramanyam, S. B., & Varanasi, K. K. (2013) · Langmuir · doi:10.1021/la400801s · Cited by 376
Anti-icing Coating with an Aqueous Lubricating Layer
Dou, R., Chen, J., Zhang, Y., Wang, X., Cui, D., Song, Y., Jiang, L., & Wang, J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501252u · Cited by 373
Peppou-Chapman, S., Hong, J. K., Waterhouse, A., & Neto, C. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00036a · Cited by 373
Du, X., Li, L., Li, J., Yang, C., Frenkel, N., Welle, A., Heissler, S., Nefedov, A., Grunze, M., & Levkin, P. A. (2014) · Advanced Materials · doi:10.1002/adma.201403709 · Cited by 372
Micro- and Nanotopography Sensitive Bacterial Attachment Mechanisms: A Review
Cheng, Y., Feng, G., & Moraru, C. I. (2019) · Frontiers in Microbiology · doi:10.3389/fmicb.2019.00191 · Cited by 367
Sojoudi, H., Wang, M., Boscher, N. D., McKinley, G. H., & Gleason, K. K. (2016) · Soft Matter · doi:10.1039/c5sm02295a · Cited by 352
Environmental Applications of Interfacial Materials with Special Wettability
Wang, Z., Elimelech, M., & Lin, S. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b04351 · Cited by 352
Porous materials as effective chemiresistive gas sensors
Sharma, A., Eadi, S. B., Noothalapati, H., Otyepka, M., Lee, H.-D., & Jayaramulu, K. (2024) · Chemical Society Reviews · doi:10.1039/d2cs00761d · Cited by 352
Omniphobic Membrane for Robust Membrane Distillation
Lin, S., Nejati, S., Boo, C., Hu, Y., Osuji, C. O., & Elimelech, M. (2014) · Environmental Science & Technology Letters · doi:10.1021/ez500267p · Cited by 351
Superhydrophobic drag reduction in laminar flows: a critical review
Lee, C., Choi, C.-H., & Kim, C.-J. (2016) · Experiments in Fluids · doi:10.1007/s00348-016-2264-z · Cited by 347
Rapid and coagulation-independent haemostatic sealing by a paste inspired by barnacle glue
Yuk, H., Wu, J., Sarrafian, T. L., Mao, X., Varela, C. E., Roche, E. T., Griffiths, L. G., Nabzdyk, C. S., & Zhao, X. (2021) · Nature Biomedical Engineering · doi:10.1038/s41551-021-00769-y · Cited by 345
Oleoplaning droplets on lubricated surfaces
Daniel, D., Timonen, J. V. I., Li, R., Velling, S. J., & Aizenberg, J. (2017) · Nature Physics · doi:10.1038/nphys4177 · Cited by 344
Self-citationSpontaneous dewetting transitions of droplets during icing & melting cycle
Wang, L., Tian, Z., Jiang, G., Luo, X., Chen, C., Hu, X., Zhang, H., & Zhong, M. (2022) · Nature Communications · doi:10.1038/s41467-022-28036-x · Cited by 344
Inhibition of ice nucleation by slippery liquid-infused porous surfaces (SLIPS)
Wilson, P. W., Lu, W., Xu, H., Kim, P., Kreder, M. J., Alvarenga, J., & Aizenberg, J. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp43586a · Cited by 341
Self-citationIce Adhesion on Lubricant-Impregnated Textured Surfaces
Subramanyam, S. B., Rykaczewski, K., & Varanasi, K. K. (2013) · Langmuir · doi:10.1021/la402456c · Cited by 339
Power generation from the interaction of a liquid droplet and a liquid membrane
Nie, J., Wang, Z., Ren, Z., Li, S., Chen, X., & Lin Wang, Z. (2019) · Nature Communications · doi:10.1038/s41467-019-10232-x · Cited by 334
Hierarchically Structured Superoleophobic Surfaces with Ultralow Contact Angle Hysteresis
Kota, A. K., Li, Y., Mabry, J. M., & Tuteja, A. (2012) · Advanced Materials · doi:10.1002/adma.201202554 · Cited by 333
Chen, J., Dou, R., Cui, D., Zhang, Q., Zhang, Y., Xu, F., Zhou, X., Wang, J., Song, Y., & Jiang, L. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401004t · Cited by 332
Said, S. A. M., Hassan, G., Walwil, H. M., & Al-Aqeeli, N. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.042 · Cited by 330
Droplet and Fluid Gating by Biomimetic Janus Membranes
Tian, X., Jin, H., Sainio, J., Ras, R. H. A., & Ikkala, O. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400714 · Cited by 329
Li, F., Wang, Z., Huang, S., Pan, Y., & Zhao, X. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706867 · Cited by 323
Designing Liquid‐Infused Surfaces for Medical Applications: A Review
Howell, C., Grinthal, A., Sunny, S., Aizenberg, M., & Aizenberg, J. (2018) · Advanced Materials · doi:10.1002/adma.201802724 · Cited by 318
Self-citationFluoropolymers in Biomedical Applications: State-of-the-Art and Future Perspectives
Lv, J., & Cheng, Y. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00258e · Cited by 316
Long-lived superhydrophobic surfaces
Xue, C.-H., & Ma, J.-Z. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01073a · Cited by 316
Programmable wettability on photocontrolled graphene film
Wang, J., Gao, W., Zhang, H., Zou, M., Chen, Y., & Zhao, Y. (2018) · Science Advances · doi:10.1126/sciadv.aat7392 · Cited by 314
Bioinspired Surfaces with Superamphiphobic Properties: Concepts, Synthesis, and Applications
Liu, H., Wang, Y., Huang, J., Chen, Z., Chen, G., & Lai, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707415 · Cited by 313
Drag Reduction using Lubricant-Impregnated Surfaces in Viscous Laminar Flow
Solomon, B. R., Khalil, K. S., & Varanasi, K. K. (2014) · Langmuir · doi:10.1021/la5021143 · Cited by 312
Bioinspired Engineering of Thermal Materials
Tao, P., Shang, W., Song, C., Shen, Q., Zhang, F., Luo, Z., Yi, N., Zhang, D., & Deng, T. (2015) · Advanced Materials · doi:10.1002/adma.201401449 · Cited by 311
Metadata
- Authors
- Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A., & Aizenberg, J.
- Venue
- Nature
- Published
- 2011-09
- Volume
- 477
- Issue
- 7365
- Pages
- 443-447
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2044670534
- Cited by
- 4,134
- References
- 27
- FWCI
- 45.59
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.