Bioresorbable silicon electronic sensors for the brain
The DOI matches its Crossref record; 33 of the 34 references it cites were found in a registry or an index.
Abstract
Many procedures in modern clinical medicine rely on the use of electronic implants in treating conditions that range from acute coronary events to traumatic injury. However, standard permanent electronic hardware acts as a nidus for infection: bacteria form biofilms along percutaneous wires, or seed haematogenously, with the potential to migrate within the body and to provoke immune-mediated pathological tissue reactions. The associated surgical retrieval procedures, meanwhile, subject patients to the distress associated with re-operation and expose them to additional complications. Here, we report materials, device architectures, integration strategies, and in vivo demonstrations in rats of implantable, multifunctional silicon sensors for the brain, for which all of the constituent materials naturally resorb via hydrolysis and/or metabolic action, eliminating the need for extraction. Continuous monitoring of intracranial pressure and temperature illustrates functionality essential to the treatment of traumatic brain injury; the measurement performance of our resorbable devices compares favourably with that of non-resorbable clinical standards. In our experiments, insulated percutaneous wires connect to an externally mounted, miniaturized wireless potentiostat for data transmission. In a separate set-up, we connect a sensor to an implanted (but only partially resorbable) data-communication system, proving the principle that there is no need for any percutaneous wiring. The devices can be adapted to sense fluid flow, motion, pH or thermal characteristics, in formats that are compatible with the body's abdomen and extremities, as well as the deep brain, suggesting that the sensors might meet many needs in clinical medicine.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In addition, self-healing can be achieved by leveraging the bonding properties of the relevant materials,[67] while biodegradability is mainly achieved by using inherently unstable materials.[68,69]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [68]
In the citing paper
“Specifically, recent studies have demonstrated the feasibility of piezoelectric,[327] near field communication (NFC),[328] and ultrasonic technologies[329] in power supply and data transmission.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [328]
Citations
Cites
Bacterial biofilms: from the Natural environment to infectious diseases
Hall-Stoodley, L., Costerton, J. W., & Stoodley, P. (2004) · Nature Reviews Microbiology · doi:10.1038/nrmicro821 · Cited by 7,143
Multiplexed electrical detection of cancer markers with nanowire sensor arrays
Zheng, G., Patolsky, F., Cui, Y., Wang, W. U., & Lieber, C. M. (2005) · Nature Biotechnology · doi:10.1038/nbt1138 · Cited by 2,436
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Label-free immunodetection with CMOS-compatible semiconducting nanowires
Stern, E., Klemic, J. F., Routenberg, D. A., Wyrembak, P. N., Turner-Evans, D. B., Hamilton, A. D., LaVan, D. A., Fahmy, T. M., & Reed, M. A. (2007) · Nature · doi:10.1038/nature05498 · Cited by 1,352
A Physically Transient Form of Silicon Electronics
Hwang, S.-W., Tao, H., Kim, D.-H., Cheng, H., Song, J.-K., Rill, E., Brenckle, M. A., Panilaitis, B., Won, S. M., Kim, Y.-S., et al. (2012) · Science · doi:10.1126/science.1226325 · Cited by 1,286 · cited 1×
“Details of this type of test method appear elsewhere.(13,14) Fig.”
MethodSelf-citation“Green” electronics: biodegradable and biocompatible materials and devices for sustainable future
Irimia-Vladu, M. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60235d · Cited by 1,044
Dissolvable Metals for Transient Electronics
Yin, L., Cheng, H., Mao, S., Haasch, R., Liu, Y., Xie, X., Hwang, S., Jain, H., Kang, S., Su, Y., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201301847 · Cited by 487
Self-citationProspective characterization and selective management of the abdominal compartment syndrome
Meldrum, D. R., Moore, F. A., Moore, E. E., Franciose, R. J., Sauaia, A., & Burch, J. M. (1997) · The American Journal of Surgery · doi:10.1016/s0002-9610(97)00201-8 · Cited by 443
Stiefel, M. F., Spiotta, A., Gracias, V. H., Garuffe, A. M., Guillamondegui, O., Maloney-Wilensky, E., Bloom, S., Grady, M. S., & LeRoux, P. D. (2005) · Journal of Neurosurgery · doi:10.3171/jns.2005.103.5.0805 · Cited by 429
Organic Thin‐Film Transistors Fabricated on Resorbable Biomaterial Substrates
Bettinger, C. J., & Bao, Z. (2010) · Advanced Materials · doi:10.1002/adma.200902322 · Cited by 423
Research works printed but not linked: 1
- Liu, C. Foundations of MEMS Ch. 6 (Prentice Hall, 2011)
Cited by
Items 701–800 of 998
Organic encapsulants for bioresorbable medical electronics
Lee, J., Park, S., & Choi, Y. S. (2024) · MRS Bulletin · doi:10.1557/s43577-023-00652-y · Cited by 11
Recent development of bioresorbable electronics using additive manufacturing
Huo, W., Li, J., Ren, M., Ling, W., Xu, H., Tee, C. A. T., & Huang, X. L. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.04.002 · Cited by 9
The Rise of Soft Neural Electronics
Chen, C., Sun, X., & Peng, H. (2021) · Giant · doi:10.1016/j.giant.2021.100075 · Cited by 9
Materials for biointegrated electronic and microfluidic systems
Rogers, J. A. (2019) · MRS Bulletin · doi:10.1557/mrs.2019.46 · Cited by 9
Self-citationA Biodegradable Implant Antenna Detecting Post-Surgical Infection
Ararat, K., Altan, Ö., Serbest, S., Başer, O., & Dumanlı, S. (2020) · European Conference on Antennas and Propagation · doi:10.23919/eucap48036.2020.9135877 · Cited by 9
Kim, K., Shin, Y., Lee, W., & Kang, S. (2025) · Advanced Electronic Materials · doi:10.1002/aelm.202500400 · Cited by 9
Self-citationExtreme manufacturing of minimally invasive intracortical neural electrodes
Xu, M., Zhu, Z., Ma, H., Zhou, G., Iliasov, A., Chen, Z., Tsang, W. M., Wu, J., Li, C., Wei, X., et al. (2025) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ae2579 · Cited by 11
“These devices can fully degrade and be resorbed by the body over time, thereby eliminating the need for a second surgery to remove them [235] .”
Hu, G., Zeng, L. Q., Zhang, Y., Peng, Y., Dong, X., Liu, M., Pan, L., Chao, Y., Li, L., Huang, W., et al. (2026) · ACS Nano · doi:10.1021/acsnano.5c20600 · Cited by 8
Integration of Ultrathin Silicon and Metal Nanowires for High‐Performance Transparent Electronics
Koo, J., Lee, C., Chu, C. R., Kang, S., & Lee, H. M. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900962 · Cited by 8
Self-citationMeng, D., Zhao, H., Wu, X., Liu, M., & Guo, Q. (2024) · IEEE Electron Device Letters · doi:10.1109/led.2024.3481255 · Cited by 8
“In this regard, silicon, as the most successful semiconductor material, has been widely developed as flexible multimodal sensors for applications in wearable skin prosthesis [19], intracranial pressure and temperature monitoring [20], and hemodynamic monitoring [21].”
InfluentialYamada, S., & Honda, T. (2024) · Nanoscale · doi:10.1039/d4nr04792c · Cited by 8
Transient Mechanics: A Perspective on Bioresorbable Electronics
Liu, P., Lee, C. G., Carusetta, N., & Avila, R. O. (2025) · Journal of Applied Mechanics · doi:10.1115/1.4067952 · Cited by 9
Self-citationBioelectric and physicochemical foundations of bioelectronics in tissue regeneration
Zheng, Y., Yang, G., Li, P., & Tian, B. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123385 · Cited by 10
Recent research progress in biomimetic tactile sensors
Zhang, J., Ma, Z., Li, S., Pan, L., & Shi, Y. (2019) · Scientia Sinica Technologica · doi:10.1360/sst-2019-0204 · Cited by 9
High-Performance Carbon Nanotube-Based Transient Complementary Electronics
Xia, F., Xia, T., Li, X., Liu, F., Jia, W., Liang, X., & Hu, Y. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c23134 · Cited by 8
Wei, Z., Ma, X., Zhao, H., Wu, X., & Guo, Q. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c04647 · Cited by 8
Bio-hybrid electronic and photonic devices
Sharfstein, S. T. (2022) · Experimental Biology and Medicine · doi:10.1177/15353702221144087 · Cited by 8
Lechuga, Y., Kandel, G., Miguel, J. A., & Martinez, M. (2023) · Micromachines · doi:10.3390/mi14010133 · Cited by 8
Advanced Bioinspired Organic Sensors for Future‐Oriented Intelligent Applications
Lu, K., Li, L., Jiang, S., Xu, C., Chang, Q., Shi, Y., & Li, Y. (2023) · Advanced Sensor Research · doi:10.1002/adsr.202200066 · Cited by 9
Yamada, S., & Honda, T. (2024) · Nanoscale · doi:10.1039/d4nr03321c · Cited by 8
Thermoresponsive Transient Radio Frequency Antennas: Toward Triggered Wireless Transient Circuits
Zhang, X., Weber, C. M., & Bellan, L. M. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900528 · Cited by 8
Huang, S., Xuan, W., Liu, S., Tao, X., Xu, H., Zhan, S., Chen, J., Cao, Z., Jin, H., Dong, S., et al. (2019) · Nanoscale · doi:10.1039/c9nr06566k · Cited by 8
Self-citationNano‐ and Microscale Optical and Electrical Biointerfaces and Their Relevance to Energy Research
Hou, K., Yang, C., Shi, J., Kuang, B., & Tian, B. (2021) · Small · doi:10.1002/smll.202100165 · Cited by 8
Manipulating Strain in Transistors: From Mechanically Sensitive to Insensitive
Li, M.-Z., Guo, L., Liu, G., Yan, Y., Zhang, M., Han, S., & Zhou, Y. (2022) · Advanced Electronic Materials · doi:10.1002/aelm.202101288 · Cited by 8
Zhong, S., Wong, H. C., Low, H. Y., & Zhao, R. J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18795 · Cited by 9
Implantable Device Fabrication and Packaging
Stieglitz, T. (2023) · Handbook of Neuroengineering · doi:10.1007/978-981-16-5540-1_102 · Cited by 7
Emerging Triboelectric Nanogenerators for In‐Body Implantation
Xiao, X., Meng, X., Kwon, Y. H., Park, Y., & Kim, S. (2025) · Small Methods · doi:10.1002/smtd.202501443 · Cited by 9
Li, J., Lu, Y., Li, Z., Jin, L., Zhou, L., Ding, K., Liu, J., Hu, B., Liu, P., An, D., et al. (2025) · Advanced Science · doi:10.1002/advs.202512114 · Cited by 9
Zhou, J., Zhao, H., Zhang, J., He, Y., Yin, A., Wu, X., Wang, Z., Meng, D., Zhao, J., Wang, X., et al. (2026) · Advanced Materials · doi:10.1002/adma.202520861 · Cited by 8
“Particularly, the power density is 4.389 mW cm − 2 , which can meet the power consumption requirements of various bioimplantable electronic devices, such as electrical stimulators [7], drug delivery pumps [42], and system-on-chip [43].”
InfluentialTechnical roadmap of ultra-thin crystalline silicon-based bioelectronics
Sang, M., Kim, K., Lee, D., Cho, Y. U., Lee, J. W., & Yu, K. J. (2025) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/add7a4 · Cited by 11
“Therefore, metallization of silicon is crucial for creating stable electrical contacts, which should ideally form Ohmic contacts [92, 119, 127, 152, 477, 506 − 510] .”
InfluentialUltra‐Sensitive Wireless Capacitive Nanocomposite‐Based Pressure Sensors for Health Monitoring
Hashemi, S., Ebrahimibasabi, S., Sajjadi, M., Shahraki, N., Shabestari, D. T., Golshahi, M., Zeinolabedinzadeh, S., Arami, H., & Khalifehzadeh, L. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202501316 · Cited by 7
Biomedical Applications of Bioresorbable Mechanical Sensors
Wu, Y., Liu, Z., & Fan, Y. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202513422 · Cited by 9
Self-citationSingle-step selective metallization on insulating substrates by laser-induced molten transfer
Xu, S., Ren, L., Liu, B., Wang, J., Tang, B., Zhou, W., & Jiang, L. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.05.144 · Cited by 7
Tyrosine‐Rich Peptide Insulator for Rapidly Dissolving Transient Electronics
Namgung, S. D., Song, M., Sung, T., Cho, O. H., Ju, M., Kim, H., Lee, Y., Nam, K. T., & Kwon, J. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000516 · Cited by 7
Ni, N., Fan, T., Ye, W., Xia, Q., Dongyang, L., Qin, J., Fan, Z., & Liu, Q. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6007 · Cited by 7
Wireless in vivo recording of cortical activity by an ion-sensitive field effect transistor
Bhatt, S., Masterson, E., Zhu, T., Eizadi, J., George, J., Graupe, N., Vareberg, A., Phillips, J. K., Bok, I., Dwyer, M. M., et al. (2023) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2023.133549 · Cited by 7
“A parallel route will be fabrication on mechanically adaptive and biologically-integrated substrates [25,49,61,67,68] to facilitate hermetic chronic operation.”
Raeis‐Hosseini, N., Noh, J., Shin, J., & Rho, J. (2024) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.4c00285 · Cited by 7
Self-citationOnses, Z. G., Kiremitler, N. B., Ozbasaran, A., Huang, X. L., Önses, M. S., & Usta, H. (2024) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.4c00569 · Cited by 11
Capacitor Mismatch Calibration Technique to Improve the SFDR of 14-Bit SAR ADC
Fan, H., Maloberti, F., Li, D., Hu, D., Cen, Y., & Heidari, H. (2017) · IEEE Computer Society Annual Symposium on VLSI · doi:10.1109/isvlsi.2017.97 · Cited by 7
SkinCell: A Modular Tactile Sensor Patch for Physical Human–Robot Interaction
Zhang, R., Lin, J.-T., Olowo, O. O., Goulet, B., Harris, B. T., & Popa, D. O. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3223320 · Cited by 7
“body and resorbed after a certain time [52], [53].”
BackgroundFunctional Nanomaterial-Based Flexible Electronics
Mo, R. (2022) · Coatings · doi:10.3390/coatings12060809 · Cited by 7
Solution-processable and photo-curable system for low-cost and scalable transient electronics
Han, W. B., Han, S., Kim, T.-K., Jang, T., Ko, G., Joo, J., Kim, T., Lee, K., Shon, Y., Park, E., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-64256-7 · Cited by 9
Self-citationBiodegradable Soft Robotics for Minimally Invasive Medical Devices: A Comprehensive Review
Alzaydi, A., Alsheghri, A., Antar, M. A., Tariq, H., Abedalrhman, K., & Sarhan, A. A. D. (2025) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-025-10927-y · Cited by 7
“The application of biodegradable materials extends to the emerging field of bioresorbable electronics, where devices such as temporary pacemakers or sensors can function for a predetermined period before safely dissolving, eliminating the risk associated with permanent implants [64].”
Wireless and battery-free implantable sensing technologies for translatable bioelectronics
Meng, X., Xiao, X., Kwon, Y. H., Park, Y., Jo, Y. J., & Kim, S. (2026) · Nature Sensors · doi:10.1038/s44460-026-00054-y · Cited by 10
One-batch transfer process for the additive manufacturing of a cantilever with a weight
Kanazawa, S., Kusaka, Y., Yamamoto, N., & Ushijima, H. (2017) · Japanese Journal of Applied Physics · doi:10.7567/jjap.56.06gn03 · Cited by 6
Guan, M., Zhang, Q., Qiu, R., Hu, Z., Zhang, X., Peng, B., & Liu, M. (2023) · Advanced Electronic Materials · doi:10.1002/aelm.202300323 · Cited by 6
Black Silicon Surface-Enhanced Raman Spectroscopy Biosensors: Current Advances and Prospects
Padrez, Y., & Golubewa, L. (2024) · Biosensors · doi:10.3390/bios14100453 · Cited by 6
“…the environmental instability of some porous black silicon, the emergence of new applications, such as in vitro living cell research and electrochemical SERS, suggests that there is still room for further improvement and the refinement of new designs of cheap, scalable and multifunctional sensors.”
BackgroundBiodegradable sensor platforms
Bathaei, M. J., Singh, R., Istif, E., & Beker, L. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-88431-0.00015-6 · Cited by 7
Biodegradable and Flexible Electronics
Gupta, V., Himalyan, S., & Sundriyal, A. (2023) · Wiley eBooks · doi:10.1002/9781394186396.ch9 · Cited by 6
Full‐Color Generation via Phototunable Mono Ink for Fast and Elaborate Printings
Lee, Y. H., Song, W. J., Park, J., Sung, G., Lee, M., Kim, M., Park, S., Lee, J. S., Kim, M., Kim, W. S., et al. (2023) · Advanced Materials · doi:10.1002/adma.202307165 · Cited by 7
Sun, Y., Boero, G., & Brügger, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202201119 · Cited by 7
Graphene in wearable textile sensor devices for healthcare
Ahmed, M. R., Newby, S., Mirihanage, W. U., Potluri, P., & Fernando, A. (2022) · Textile Progress · doi:10.1080/00405167.2022.2128015 · Cited by 7
“…et al. proposed a silicon-based multifunctional brain sensor and several immunohistochemical studies on brain tissue after implantation, two, four, and eight weeks, showing that the sensor and its by-products were released in the brain cavity were fully biocompatible (S.-K. Kang et al., 2016).”
MethodSilicon-based transient electronics: principles, devices and applications
Zhao, H., Liu, M., & Guo, Q. (2024) · Nanotechnology · doi:10.1088/1361-6528/ad3ce1 · Cited by 6
“In 2016, Kang et al developed a bior-esorbable silicon electronic sensors for monitoring the intracranial pressure and temperature [ 117 ] .”
Solvent-Free Strategy To Encapsulate Degradable, Implantable Metals in Silk Fibroin
Hawker, M. J., Guo, C., Omenetto, F. G., & Kaplan, D. L. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00498 · Cited by 7
Active Transiency: A Novel Approach to Expedite Degradation in Transient Electronics
Jamshidi, R., Chen, Y., & Montazami, R. (2020) · Materials · doi:10.3390/ma13071514 · Cited by 6
McShane, M. J., Zavareh, A. T., & Jeevarathinam, A. S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-822548-6.00133-3 · Cited by 6
Wu, K., Zhu, X., Anderson, S. W., & Zhang, X. (2025) · Advanced Science · doi:10.1002/advs.202414299 · Cited by 5
Interfacial Photogating of Graphene Field‐Effect Transistor for Photosensory Biomolecular Detection
Howe, L., Wang, Y., Ellepola, K. H., Ho, V. X., Dohmen, R. L., Pinto, M. M., Hoff, W. D., Cooney, M. P., & Vinh, N. Q. (2025) · Advanced Electronic Materials · doi:10.1002/aelm.202400716 · Cited by 5
Low‐Cost WS 2 Photodetector on Water‐Soluble Paper for Transient Electronics
Ersü, G., Doolan, L., Pucher, T., Coleman, J. N., & Castellanos-Gómez, A. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202509505 · Cited by 6
Biodegradable Sensors for Healthcare: Materials and Technologies
Sana, P. A., Thanha, K. P. K., & Pramod, K. (2025) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.70094 · Cited by 5
Sadi, M. S., Onuralp, D. B., Morsada, Z., Kumpikaitė, E., Ordu, M., & Hossain, M. M. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01782 · Cited by 5
Harwell, J. R., Zhang, T., Rollo, A., Wagih, M., & Kettle, J. (2025) · Communications Materials · doi:10.1038/s43246-025-01031-7 · Cited by 6
Bioresorbable Systems in Healthcare for Transient Sensing and Therapeutic Interventions
Kim, J., Seo, Y., & Kim, J. (2026) · Advanced Therapeutics · doi:10.1002/adtp.202500544 · Cited by 5
“[2] [12] [32] cleavage of ester linkages, yielding low–molecular‑weight, bio-compatible byproducts [2, 12, 30, 32, 41, 75–93].”
InfluentialSelf-citationVanishing Soft Electronics: Degradation Mechanisms of Transient Materials
Ho, D. H., & Cho, J. H. (2024) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-024-00320-0 · Cited by 9
“As a result, recent advances in transient soft electronics enabled various electronic components such as transistor [9–12], sensor [13–18], LED [19, 20], battery [21–26], memristor, [27–32], or even logic gate [33–37] (Fig.”
Emergency delivery of particulate drugs by active ejection using in vivo wireless devices
Krishnan, S. R., O’Keeffe, L., Rudra, A., Gumustop, D. R., Khatib, N., Liu, C., Yang, J., Wang, A., Bochenek, M. A., Lu, Y., et al. (2025) · Nature Biomedical Engineering · doi:10.1038/s41551-025-01436-2 · Cited by 10
“The triggering mechanism can also be combined with emergent classes of wearable 61–63 and implantable 64,65 biosensors capable of tracking a range of biomarkers indicative of acute life-threatening events including measures of cardiac activity 66 , thermoregulation 67 and inflammation 68 .”
MEMS in Twenty-First-Century Healthcare
Noushin, T., Parvez, M. S., Biswas, P., Bhuiyan, M. E. H., Rumon, M. A. A., & Tabassum, S. (2025) · Springer tracts in electrical and electronics engineering · doi:10.1007/978-981-96-4659-3_3 · Cited by 9
In-body current path manipulation with minimal attenuation
Kang, D., Park, B., Hwang, J., Kim, Y., Kim, S.-H., Kim, H. W., Yu, K. J., Jeon, J., Lee, H. Y., Chung, Y., et al. (2025) · Science Advances · doi:10.1126/sciadv.adx5922 · Cited by 6
“S30 and S31) ( 24 , 25 ).”
Improved transfer process for fabrication of cantilever with precise air-gap formation
Kanazawa, S., Kusaka, Y., Yamamoto, N., & Ushijima, H. (2017) · Japanese Journal of Applied Physics · doi:10.7567/jjap.56.05eb01 · Cited by 8
Nanotechnology in neurosurgical oncology
Tan, A., Jeyaraj, R., & Lacey, S. F. D. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-39080-4.00007-0 · Cited by 7
Conductive Nanosheets for Ultra‐Conformable Smart Electronics
Yamagishi, K., Taccola, S., Takeoka, S., Fujie, T., Mattoli, V., & Greco, F. (2018) · Wiley eBooks · doi:10.1002/9783527804856.ch11 · Cited by 5
Bioresorbable Conductive Wire with Minimal Metal Content
Palmroth, A., Salpavaara, T., Lyyra, I., Kroon, M., Lekkala, J. O., & Kellomäki, M. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01292 · Cited by 5
Knier, K., Fleischman, D., Hodge, D. O., Berdahl, J. P., & Fautsch, M. P. (2020) · Journal of Ophthalmology · doi:10.1155/2020/7487329 · Cited by 5
“Ultimately, this work may help direct the development of novel interventions targeting the mechanical component of TLPD imbalance at the optic nerve head [22] and noninvasive, low-cost measures of CSFp that can be used in the clinical setting to improve early diagnosis of OAG, especially NTG [23, 24].”
BackgroundDebnath, B., Gharami, S., Bhattacharyya, S., Das, A., & Das, A. (2022) · Wiley eBooks · doi:10.1002/9781119905301.ch20 · Cited by 6
Xu, D., Hong, J., Park, K., & Ahn, J. (2026) · Small · doi:10.1002/smll.202514286 · Cited by 5
Sensorized Engineered Tissues with Built‐in Thermoregulation and Nutrient Supply
Georgopoulou, A., Schreiner, J. O., Filippi, M., Balciunaite, A., Katzschmann, R. K., & Amstad, E. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202530747 · Cited by 4
Kim, J. U., Seo, S. G., Wang, H., Rytkin, E., Gong, J., Zhou, J., Choi, J., Kim, J., Park, S.-J., Pfenniger, A., et al. (2026) · Nature Electronics · doi:10.1038/s41928-026-01655-8 · Cited by 5
Self-citationDegradation of Block Copolymer Films Confined in Elastic Media: Molecular Dynamics Simulations
Sayko, R., Wang, Z., Liang, H., Becker, M. L., & Dobrynin, A. V. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01795 · Cited by 4
Highly Branched Betulin Based Polyanhydrides for Self-Assembled Micellar Nanoparticles Formulation
Niewolik, D., Bednarczyk–Cwynar, B., Ruszkowski, P., Dzido, G., & Jaszcz, K. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms231911462 · Cited by 4
“Another report describes the use of polyanhydrides within biodegradable brain sensors, which enable wireless data collection in body cavities and in deep tissues with fully bioresorbable platforms [14].”
BackgroundMingliang, 徐. X., Fangyuan, 李. L., Yueqi, 刘. L., Jinhui, 张. Z., Yazhou, 师. S., & Fei, 何. H. (2023) · Chinese Journal of Lasers · doi:10.3788/cjl221482 · Cited by 4
Biodegradable electronics: a two-decade bibliometric analysis
Himalyan, S., & Gupta, V. (2024) · Quality & Quantity · doi:10.1007/s11135-023-01812-7 · Cited by 5
“And deal with the development of biocompatible electronic devices which can sense physiological activities and leave no trace after a specified amount of time, avoiding the need for additional surgical procedures to remove the implants (Kang et al. 2016).”
Biodegradable and Biohybrid Materials for Next-Generation Brain-Computer Interfaces
Seyedkhani, S. A. (2024) · Artificial intelligence · doi:10.5772/intechopen.115156 · Cited by 4
CMOS Compatible Transient Resistive Memory with Prolonged Lifetime
Zhong, S., Ji, X., Zhou, Y., Zhang, Y., Ai, Y., & Zhao, R. J. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900217 · Cited by 5
Nanoparticles-Based Flexible Wearable Sensors for Health Monitoring Applications
Nag, A., & Mukhopadhyay, S. C. (2019) · Springer eBooks · doi:10.1007/978-3-662-59600-5_9 · Cited by 6
Yang, X., Geng, B., Wei, J., Wang, Z., Lan, K., Ren, X., & Qin, G. (2021) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ac453c · Cited by 4
Copolymers of Gelatin-graft-poly(3-hexylthiophene) for Transient Electronics
Xin, S., Chan, E. W. C., Chen, Q., Kirby, N. M., Yang, J., Mata, J. P., Kingston, R. L., Barker, D. L. A., Domigan, L. J., & Travaš‐Sejdić, J. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c02174 · Cited by 5
Strain Engineered Semiconductor Nanomembranes for Photonic and Optoelectronic Applications
Tiwari, S., Kumar, T., Saxena, S. K., Prakash, R., & Chaudhary, A. (2024) · Advanced Optical Materials · doi:10.1002/adom.202402065 · Cited by 5
Grant, D. S., Bazaka, K., Davies, J. B., Banos, C., & Jacob, M. V. (2017) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-017-7975-2 · Cited by 5
Flexible Circuits for Moisture Measurement in Cylindrical Timber of Wood
dos Reis, D. D., Castaldo, F., & Pichorim, S. F. (2019) · IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) · doi:10.1109/fleps.2019.8792322 · Cited by 4
Electric Conductivity of Electrolytic Copper Powder Filled Poly(Lactide-co-Glycolide) Composites
Pavlović, M. M., Pantović, R. V., Janković, Z., Nedeljković, D., Nikolić, N. D., Pavlović, M., & Stevanović, J. (2019) · International Journal of Electrochemical Science · doi:10.20964/2019.10.02 · Cited by 4
Transition from rectification to resistive-switching in Ti/MgF2/Pt memory
Sun, Y. K., Wang, C., Xu, H., Song, B., Li, N., Li, Q., & Liu, S. (2019) · AIP Advances · doi:10.1063/1.5125153 · Cited by 4
Implantable Device Fabrication and Packaging
Stieglitz, T. (2021) · Handbook of Neuroengineering · doi:10.1007/978-981-15-2848-4_102-1 · Cited by 6
Lee, J., Lee, H., Lee, S., Na, H., Lee, T. G., Wi, J., & Kang, S. (2021) · Advanced Photonics Research · doi:10.1002/adpr.202100162 · Cited by 4
Self-citationA Repeater Antenna System Utilizing Genetically Modified Bacteria for Multiscale Communications
Sezgen, O. F., Erden, O. K., Hacıosmanoğlu, N., Lacin, M. E., Yalcinkaya, A. D., Özdil, Z. C. C., Şeker, U. Ö. Ş., & Dumanlı, S. (2022) · European Conference on Antennas and Propagation · doi:10.23919/eucap53622.2022.9769316 · Cited by 4
Inorganic Flexible Electronics: Materials, Strategies, and Applications
Qinglei, G., & Di, Z. (2022) · Wiley eBooks · doi:10.1002/9783527813933.ch4 · Cited by 5
Tunable Biopolymers: Biomedical Applications
Krishnakumar, A., Shedaliya, U., Shah, K., & Anju, T. R. (2023) · Springer eBooks · doi:10.1007/978-981-19-0710-4_32 · Cited by 4
Recent advances of implantable systems and devices in cancer therapy and sensing
Jiang, Z., Yue, Z., Liu, Z., & Li, L. (2023) · Nano Research · doi:10.1007/s12274-023-5808-6 · Cited by 4
Self-citationLee, H., Baek, J. J., Oh, J. Y., & Lee, T. I. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150168 · Cited by 4
Monajjemi, M., & Mollaamin, F. (2024) · Sensor Review · doi:10.1108/sr-05-2024-0425 · Cited by 4
A diffraction-based degradation sensor for polymer thin films
Anbukarasu, P., Martínez-Tobón, D. I., Sauvageau, D., & Elias, A. L. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.05.020 · Cited by 5
Micro- and Nanotechnology-Based Implantable Devices and Bionics
Bisht, R., Mandal, A., & Mitra, A. K. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-42978-8.00011-5 · Cited by 6
Metadata
- Authors
- Kang, S.-K., Murphy, R. K. J., Hwang, S.-W., Lee, S. M., Harburg, D. V., Krueger, N. A., Shin, J., Gamble, P., Cheng, H., Yu, S., Liu, Z., McCall, J. G., Stephen, M., Ying, H., Kim, J., Park, G., Webb, R. C., Lee, C. H., Chung, S., Wie, D. S., Gujar, A. D., Vemulapalli, B., Kim, A. H., Lee, K.-M., Cheng, J., Huang, Y., Lee, S. H., Braun, P. V., Ray, W. Z., & Rogers, J. A.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- Washington University in St. Louis (US)
- Korea University (KR)
- Pennsylvania State University (US)
- Institute of High Performance Computing (SG)
- Purdue University West Lafayette (US)
- Northwestern University (US)
- Corresponding author
- Ray, Wilson Z.
- Rogers, John A.
- ORCID
- Venue
- Nature
- Published
- 2016-01-18
- Volume
- 530
- Issue
- 7588
- Pages
- 71-76
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2264088247
- Cited by
- 998
- References
- 34
- Citations by year
- 2026: 67 · 2025: 89 · 2024: 95 · 2023: 108 · 2022: 101 · 2021: 114 · 2020: 107 · 2019: 97 · 2018: 97 · 2017: 83 · 2016: 40
- FWCI
- 59.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- Howard Hughes Medical Institute
- National Institute of Mental Health (F31MH101956)
- Topics
- Life Sciences › Neuroscience › Cellular and Molecular Neuroscience › Neuroscience and Neural Engineering
- Physical Sciences › Engineering › Biomedical Engineering › Wireless Body Area Networks
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
- Keywords
- bioresorbable electronics, silicon detectors, neural implants, intracranial pressure monitoring, implantable sensors, wireless telemetry, traumatic brain injury
- MeSH terms
- Administration, Cutaneous, Animals, Body Temperature, Brain, Electronics, Equipment Design, Hydrolysis, Male, Monitoring, Physiologic, Organ Specificity, Pressure, Rats, Inbred Lew, Silicon, Telemetry, Prostheses and Implants, Absorbable Implants, Rats, Wireless Technology
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.