Processing bulk natural wood into a high-performance structural material
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
Synthetic structural materials with exceptional mechanical performance suffer from either large weight and adverse environmental impact (for example, steels and alloys) or complex manufacturing processes and thus high cost (for example, polymer-based and biomimetic composites). Natural wood is a low-cost and abundant material and has been used for millennia as a structural material for building and furniture construction. However, the mechanical performance of natural wood (its strength and toughness) is unsatisfactory for many advanced engineering structures and applications. Pre-treatment with steam, heat, ammonia or cold rolling followed by densification has led to the enhanced mechanical performance of natural wood. However, the existing methods result in incomplete densification and lack dimensional stability, particularly in response to humid environments, and wood treated in these ways can expand and weaken. Here we report a simple and effective strategy to transform bulk natural wood directly into a high-performance structural material with a more than tenfold increase in strength, toughness and ballistic resistance and with greater dimensional stability. Our two-step process involves the partial removal of lignin and hemicellulose from the natural wood via a boiling process in an aqueous mixture of NaOH and Na 2 SO 3 followed by hot-pressing, leading to the total collapse of cell walls and the complete densification of the natural wood with highly aligned cellulose n…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“new wood-based products such as cross-laminated timber and acetylated wood 87 -which are aimed at new markets-also have potential.”
From The technological and economic prospects for CO2 utilization and removal (2019) · cites this paper as [87]
In the citing paper
“The application of wood nanotechnology for producing bioinspired functional materials, with a particular emphasis on novel nanotechnological approaches for developing new wood-based materials, has been developed for sustainable use in various production systems.276,278,279”
From Technologies and perspectives for achieving carbon neutrality (2021) · cites this paper as [278]
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
High tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Recent developments in advanced aircraft aluminium alloys
Dursun, T., & Soutis, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.12.002 · Cited by 2,807
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
Structural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Kim, S.-H., Kim, H., & Kim, N. J. (2015) · Nature · doi:10.1038/nature14144 · Cited by 830
Microstructures and Mechanical Properties of High‐Strength Fe‐Mn‐Al‐C Light‐Weight TRIPLEX Steels
Frommeyer, G., & Brüx, U. (2006) · steel research international · doi:10.1002/srin.200606440 · Cited by 660
Cited by
Items 501–600 of 1,001
Shape and Stiffness Switchable Hydroplastic Wood with Programmability and Reproducibility
Zhang, T., Zhang, D., Chen, W., Chen, Y., Yang, K., Yang, P., Quan, Q., Li, Z., Zhou, K. C., Chen, M., et al. (2023) · ACS Nano · doi:10.1021/acsnano.3c06322 · Cited by 33
Structure and mechanical properties of windmill palm fiber with different delignification treatments
Chen, C., Xu, P., & Wang, X. (2023) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2023.12.001 · Cited by 33
Self-citationBio‐Inspired Ultrathin Perfect Absorber for High‐Performance Photothermal Conversion
Liao, Q., Zhu, K., Hao, X., Wu, C., Li, J., Cheng, H., Yan, J., Jiang, L., & Qu, L. (2024) · Advanced Materials · doi:10.1002/adma.202313366 · Cited by 33
Fratzl, P. (2018) · Nature · doi:10.1038/d41586-018-01371-0 · Cited by 33
Jin, L., Wei, K., Xia, Y., Liu, B., Zhang, K., Gao, H., Chu, X., Ye, M., He, L., & Peng, L. (2019) · Materials Today Energy · doi:10.1016/j.mtener.2019.100348 · Cited by 33
Horikawa, Y., TSUSHIMA, R., Noguchi, K., Nakaba, S., & Funada, R. (2020) · Journal of Wood Science · doi:10.1186/s10086-020-01884-1 · Cited by 33
Zhang, Q., Xu, Z., & Liu, W. (2024) · Chinese Journal of Polymer Science · doi:10.1007/s10118-024-3204-7 · Cited by 33
Zhang, Y., Chen, X., Li, W., Wang, B., Zhang, Q., Zhao, Z., Wang, Y., Guan, Y., & Zhang, Y. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202511554 · Cited by 32
Xia, Y., Li, J., Ji, Z., Zhou, K., Zhang, Y., Liu, Y., Tsang, S., Wong, K. W., Wang, Q., Wang, W., et al. (2025) · Advanced Materials · doi:10.1002/adma.202506338 · Cited by 32
Zhang, J., Wang, Z., Li, T., Wang, Z., Zhang, S., Zhong, M., Liu, Y., & Gong, X. (2018) · Waste Management · doi:10.1016/j.wasman.2018.11.033 · Cited by 32
Self-citationContinuous Fly-Through High-Temperature Synthesis of Nanocatalysts
Qiao, Y., Chen, C., Liu, Y., Liu, Y., Dong, Q., Yao, Y., Wang, X., Shao, Y., Wang, C., & Hu, L. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c03620 · Cited by 32
Self-citationGómez, I., & Lizundia, E. (2021) · Advanced Sustainable Systems · doi:10.1002/adsu.202100236 · Cited by 32
Li, Z., Yi, S., Pang, H., Ma, C., Mo, L., & Zhang, S. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.114982 · Cited by 32
Strong, Water-Resistant, and Ionic Conductive All-Chitosan Film with a Self-Locking Structure
Li, S., Wang, H., Wan, Z., Guo, Y., Chen, C., Li, D., Zhu, M., & Chen, Y. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c01118 · Cited by 32
Self-citationJakob, M., Czabany, I., Veigel, S., Müller, U., & Gindl‐Altmutter, W. (2022) · European Journal of Wood and Wood Products · doi:10.1007/s00107-022-01828-0 · Cited by 32
Zheng, Z., Chen, C., Huang, Y., Ou, R., Hu, C., Wang, X., Zhou, Q., & Tu, D. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00279 · Cited by 32
Self-citationTang, K., Peng, X., Chen, S., Song, F., Liu, Z., Hu, J., Xie, X., & Wu, Z. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.10.102 · Cited by 32
Eco-friendly and large porosity wood-derived SiC ceramics for rapid solar thermal energy storage
Xu, Q. P., Liu, X., Luo, Q., Yao, H., Wang, J., Lv, S., Dang, C., Tian, Y., & Xuan, Y. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.112174 · Cited by 32
Wei, A., Wang, S., Lu, X., Zou, Y., Xiang, C., Xu, F., Sun, L., & Lu, Y. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.111160 · Cited by 31
Disordered mechanical metamaterials with programmable properties
Liu, Y., Xia, B., Zhou, Y., & Wei, K. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.120700 · Cited by 31
Preparation and Application of Nature-inspired High-performance Mechanical Materials
Cui, J., Xia, Y., Yu, Y., Xu, H. Y., Zhang, N., Tuo, Z., Liu, Z., Lin, Z., Ma, S., Liang, Y., et al. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.01.007 · Cited by 31
Synthesis of Amino-Functionalized Waste Wood Flour Adsorbent for High-Capacity Pb(II) Adsorption
Tan, Y., Wang, K., Yan, Q., Zhang, S., Li, J., & Ji, Y. (2019) · ACS Omega · doi:10.1021/acsomega.9b00920 · Cited by 31
Beyond density: Mesostructural features of impact resistant wood
Matsushita, A. K., Gonzalez, D., Wang, M., Doan, J., Qiao, Y., & McKittrick, J. M. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100697 · Cited by 31
Dong, R., Dong, Y., Li, Q., & Wan, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.119155 · Cited by 31
Liu, J., Yu, P., Wang, D., Chen, Z., Cui, Q., Hu, B., Zhang, D., Li, Y., Chu, H., & Li, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00646 · Cited by 31
Self-citationEffect of Hygrothermal Treatment on the Porous Structure and Nanomechanics of Moso Bamboo
Ye, C., Huang, Y., Feng, Q., & Fei, B. (2020) · Scientific Reports · doi:10.1038/s41598-020-63524-4 · Cited by 31
Crystalline stability of cellulose III nanocrystals in the hydrothermal treatment and NaOH solution
Wu, Q., Xu, J., Zhu, S., Kuang, Y., Wang, B., & Gao, W. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116827 · Cited by 31
Self-citationHuang, J., Zhong, Y., Lu, A., Zhang, L., & Cai, J. (2020) · Giant · doi:10.1016/j.giant.2020.100038 · Cited by 31
Single-atom electrocatalysts templated by MOF for determination of levodopa
Liang, W., Gao, M. H., Li, Y., Tong, Y., & Ye, B. (2020) · Talanta · doi:10.1016/j.talanta.2020.122042 · Cited by 31
Self-citationNacreous aramid-mica bulk materials with excellent mechanical properties and environmental stability
Pan, X., Gao, H., Wu, K., Chen, S., He, T., Lü, Y., Ni, Y. Z., & Yu, S. (2020) · iScience · doi:10.1016/j.isci.2020.101971 · Cited by 31
Naturally or artificially constructed nanocellulose architectures for epoxy composites: A review
Yu, T., Soomro, S. A., Huang, F., Wei, W., Wang, B., Zhou, Z., & Hui, D. (2020) · Nanotechnology Reviews · doi:10.1515/ntrev-2020-0116 · Cited by 31
“[60] Song J, Chen C, Zhu S, Zhu M, Dai J, Ray U, et al.”
BackgroundTransformation of Fibrous Membranes from Opaque to Transparent under Mechanical Pressing
Wang, C., Zhao, J., Liu, L., Zhang, P., Wang, X., Yu, J., & Ding, B. (2021) · Engineering · doi:10.1016/j.eng.2021.02.018 · Cited by 31
Lu, J., Huang, Y., Jiang, P., Chen, Z., Bourbigot, S., Fontaine, G., Chang, L., Zhang, L., & Pan, F. (2021) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2021.109799 · Cited by 31
Xi, P., Wu, L. H., Quan, F., Xia, Y., Fang, K., & Jiang, Y. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c04257 · Cited by 31
The emerging development of transparent wood: materials, characteristics, and applications
Zhang, J., Koubaa, A., Tao, Y., Li, P., & Xing, D. (2022) · Current Forestry Reports · doi:10.1007/s40725-022-00172-z · Cited by 31
Functional wood for carbon dioxide capture
Roy, S., Philip, F. A., Oliveira, E. F., Singh, G., Joseph, S., Yadav, R. M., Adumbumkulath, A., Hassan, S., Khater, A. Z., Wu, X., et al. (2023) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2023.101269 · Cited by 30
Effects of Thermal Treatment on the Mechanical Properties of Bamboo Fiber Bundles
Cui, J., Fu, D., Mi, L., Li, L., Liu, Y., Wang, C., He, C., Zhang, H., Chen, Y., & Wang, Q. (2023) · Materials · doi:10.3390/ma16031239 · Cited by 31
“On a molecular scale, the abundance of hydroxyl groups in the cellulose molecular chains [34] leads to relative sliding between the cell walls of bamboo fibers involving abundant hydrogen bond formation, breakage, and recombination.”
BackgroundLiu, Z., Zhang, X., Zhou, W., Wang, G., Liu, T., Luo, J. T., Gao, Q., Luo, J., & Li, J. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137739 · Cited by 31
Transforming interface properties of wood laminate composites functionalized by adhesive penetration
Li, Z., Chu, S., Zhang, Y., Lin, L., & Liu, X. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110859 · Cited by 31
Cheng, R., Wu, Y., Wang, B., Zeng, J., Li, J., Xu, J., Gao, W., & Chen, K. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta03798c · Cited by 31
Zhang, S., Zhao, X., Peng, Y., Yang, T., Huang, Y., Li, L., & Wang, M. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117233 · Cited by 31
Xu, Y., Zhang, H., & Huang, G. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108227 · Cited by 31
Dynamic Thermostable Cellulosic Triboelectric Materials from Multilevel‐Non‐Covalent Interactions
Wang, J., Liu, Y., Liu, T., Zhang, S., Wei, Z., Luo, B., Cai, C., Chi, M., Wang, S., & Nie, S. (2023) · Small · doi:10.1002/smll.202307504 · Cited by 31
X-Mechanics—An endless frontier
Yang, W., Wang, H., Li, T., & Qu, S. (2018) · Science China Physics Mechanics and Astronomy · doi:10.1007/s11433-018-9274-6 · Cited by 31
Self-citationMa, H., Gong, P., Zhai, S., Huang, Y., Niu, Y., Park, C. B., & Li, G. (2019) · Chemical Engineering Science · doi:10.1016/j.ces.2019.07.007 · Cited by 31
Effects of Fiber Angle on the Tensile Properties of Partially Delignified and Densified Wood
Jakob, M., Gaugeler, J., & Gindl‐Altmutter, W. (2020) · Materials · doi:10.3390/ma13235405 · Cited by 31
“KG, Karlsruhe, Germany), as described by Song and coauthors [19].”
BackgroundRahmadiawan, D., Shi, S.-C., Abral, H., Ilham, M. K., Sugiarti, E., Muslimin, A. N., Ilyas, R. A., Lapisa, R., & Putra, N. S. D. (2024) · Journal of Natural Fibers · doi:10.1080/15440478.2023.2301386 · Cited by 30
“This increased transparency is because boiling and vacuuming assisted in forming intra-and interlinking hydrogen bonds resulting in highly crystalline domains (Song et al. 2018).”
Ren, H., Bahrami, A., Cehlin, M., & Wallhagen, M. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118552 · Cited by 30
Scalable production of robust and creep resistant ultra-high filled wood-plastic composites
Yang, A., Liao, Z., Xu, Z., Liu, T., Fang, Y., Wang, W., Xu, M., Song, Y., Wang, Q., & Li, Y. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111937 · Cited by 30
Self-citationXu, Q. G., Xu, S., Tian, R., & Lu, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00949 · Cited by 30
Processing nanocellulose foam into high-performance membranes for harvesting energy from nature
Zhang, F., Li, Y., Cai, H. W., Liu, Q., & Tong, G. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116253 · Cited by 30
Self-citationA microstructure-based constitutive model of anisotropic cellulose nanopaper with aligned nanofibers
Meng, Q., & Shi, X. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.101158 · Cited by 30
An Oxidative Enzyme Boosting Mechanical and Optical Performance of Densified Wood Films
Koskela, S., Wang, S., Li, L., Zha, L., Berglund, L. A., & Zhou, Q. (2023) · Small · doi:10.1002/smll.202205056 · Cited by 30
Form-Stable Phase Change Material with Wood-Based Materials as Support
Hanif, F., Imran, M., Zhang, Y., Jia, Z., Lu, X., Lu, R., & Tang, B. (2023) · Polymers · doi:10.3390/polym15040942 · Cited by 30
Self-citationBioinspired Strong and Tough Organic–Inorganic Hybrid Fibers
Xiao, Y., Yang, C., Guo, B., Zhai, X., Lao, S., Zhao, P., Ruan, J., Lu, X., Liu, K., & Chen, D. (2023) · Small Structures · doi:10.1002/sstr.202300080 · Cited by 30
Horizontal Flame Spread Behavior of Densified Wood: Effect of Structural Characteristics
Zhou, Y., Zhou, P., Bu, R., Zhang, X., Chu, T., & Wang, Z. (2023) · Fuel · doi:10.1016/j.fuel.2023.130687 · Cited by 30
Lightweight, Strong, and Transparent Wood Films Produced by Capillary Driven Self‐Densification
Chen, F., Ritter, M., Xu, Y., Tu, K., Koch, S. M., Yan, W., Bian, H., Ding, Y., Sun, J., & Burgert, I. (2024) · Small · doi:10.1002/smll.202311966 · Cited by 30
Wei, A., Wang, S., Zou, Y., Xiang, C., Xu, F., & Sun, L. (2024) · Polymers · doi:10.3390/polym16111557 · Cited by 30
Processing cellulose@Fe3O4 into mechanical, magnetic and biodegradable synapse-like material
Zhang, Y., Li, J., Ma, N., Meng, Z., & Sui, G. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107432 · Cited by 30
Extinction of Wood Fire: A Near-Limit Blue Flame Above Hot Smoldering Surface
Lin, S., Huang, X., Gao, J. H., & Ji, J. (2021) · Fire Technology · doi:10.1007/s10694-021-01146-6 · Cited by 30
A Review of Bamboo: Characteristics, Components, and Its Applications
Irawan, B., Ihsan, M. F., Permana, M. D., & Noviyanti, A. R. (2025) · Journal of Natural Fibers · doi:10.1080/15440478.2025.2522928 · Cited by 29
“This performance is obtained from the strong fiber alignment and high fiber volume (Song et al. 2018).”
Jiang, B., Chen, H., Zhao, H., Wu, W., & Jin, Y. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.027 · Cited by 29
Biomineralization: Biomimetic Synthesis of Materials and Biomimetic Regulation of Organisms
Ma, Z., Li, B., & Tang, R. (2021) · Chinese Journal of Chemistry · doi:10.1002/cjoc.202100119 · Cited by 29
Zhang, Z., Li, H., Cui, J., Yang, Z., Hou, R., Ju, Y., Lu, X., & Chen, F. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135595 · Cited by 29
Self-citationWang, J., Han, X., Wu, W., Wang, X., Ding, L., Wang, Y., Li, S., Hu, J., Yang, W., Zhang, C., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123343 · Cited by 29
Wood-derived high-performance cellulose structural materials
Yan, W., Liu, J., Zheng, X., Zhang, J., & Tang, K. (2023) · e-Polymers · doi:10.1515/epoly-2023-0010 · Cited by 29
Lu, Z., Chen, J., Pan, D., & Hou, Y. (2023) · Gels · doi:10.3390/gels9060467 · Cited by 29
“These issues have hindered the development of wood products [4].”
BackgroundWang, J., Zou, X., Song, L., Hou, Y., Lü, J., Gao, X. Y., He, Q., Ren, Y., Zhan, X., & Zhang, Q. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta04886a · Cited by 29
Sustainable adhesives for ultra-composites from biomass powder
Zhan, B., Zhang, L., Deng, Y., Fan, M., & Yan, L. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149984 · Cited by 29
Pu, J., Zhu, H., Wang, Q., Qu, Z., & Zhang, J. (2024) · ACS Energy Letters · doi:10.1021/acsenergylett.4c00372 · Cited by 29
Magnetic-responsive Fe3O4 nanoparticle-impregnated cellulose paper actuators
Wang, X., Han, B., Yu, R., Li, F.-C., Zhao, Z., Zhang, Q., & Lu, T. J. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2018.10.003 · Cited by 29
Guan, X., Chen, H., Xia, H., Fu, Y., Qiu, Y., & Ni, Q. (2020) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x20906477 · Cited by 29
“, 2018), engineering (Li et al., 2018a; Song et al., 2018), aerospace (Cao et al.”
MethodCell Wall Bulking by Maleic Anhydride for Wood Durability Improvement
He, M., Xu, D., Li, C., Ma, Y., Dai, X., Pan, X., Fan, J., He, Z., Gui, S., Dong, X., et al. (2020) · Forests · doi:10.3390/f11040367 · Cited by 29
Self-citationBui, T. A., Oudjène, M., Lardeur, P., Khelifa, M., & Rogaume, Y. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110586 · Cited by 29
Terzopoulou, P., Vouvoudi, E. C., & Achilias, D. S. (2025) · Forests · doi:10.3390/f16060993 · Cited by 28
Lu, Z., Qi, L., Chen, J., Lu, C., Huang, J., Chen, L., Wu, Y., Feng, J., Lin, J., Liu, Z., et al. (2025) · Science Advances · doi:10.1126/sciadv.ady0183 · Cited by 28
“Limited by the hydrothermal treatment that can lead to incomplete densification, scientists have developed a chemical delignification process involving alkali or acid that allows the cells to collapse and close adequately during the hot compression stage ( 12 ).”
InfluentialSelf-citationCellulose Nanofiber Biotemplated Palladium Composite Aerogels
Burpo, F. J., Mitropoulos, A. N., Nagelli, E. A., Palmer, J. L., Morris, L. A., Ryu, M. Y., & Wickiser, J. K. (2018) · Molecules · doi:10.3390/molecules23061405 · Cited by 28
Жолобко, О., Wu, X., Zhou, Z., Aulich, T., Thakare, J., & Hurley, J. P. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49639 · Cited by 28
Ren, K., Xia, Q., Liu, Y., Cheng, W., Zhu, Y., Liu, Y., & Yu, H. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108698 · Cited by 28
Zhang, K., Weng, B., Cheng, D., Guo, Y. C., Chen, T., Wang, L., Wang, C., Xu, R., & Chen, Y. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.03.053 · Cited by 28
Zhou, S., Khan, T., Jin, K., Lee, J., & Buehler, M. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109881 · Cited by 28
Mechanical Performance of Timber-to-Timber Joints with Densified Wood Dowels
Xu, B.-H., Jiao, S.-Y., Wang, B.-L., & Bouchaïr, A. (2022) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0003317 · Cited by 28
Smoldering ignition and emission dynamics of wood under low irradiation
Liang, Z., Lin, S., & Huang, X. (2022) · Fire and Materials · doi:10.1002/fam.3107 · Cited by 28
Wei, X., Zhang, S. X., & Sheng, L. (2022) · Advanced Materials · doi:10.1002/adma.202208261 · Cited by 28
Sustainable Development Approaches through Wooden Adhesive Joints Design
Borges, C. S. P., Jalali, S., Tsokanas, P., Marques, E. A. S., Carbas, R. J. C., & da Silva, L. F. M. (2022) · Polymers · doi:10.3390/polym15010089 · Cited by 28
“[86] boiled wood in a NaOH/Na2SO3 solution and then pressed it at high temperature.”
BackgroundNeudecker, F., Jakob, M., Bodner, S. C., Kečkéš, J., Buerstmayr, H., & Gindl‐Altmutter, W. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01375 · Cited by 28
Tang, Q., Xiao, Y., Zou, M., Zhang, L., Chang, L., Chen, X., Zhang, J., Zhou, G., Gao, K., Guo, W., et al. (2024) · Advanced Materials · doi:10.1002/adma.202306593 · Cited by 28
Wu, Y. R., Li, S., Yan, K. Q., Xia, M., Cheng, Q., Xu, J. Y., He, S., Zha, X., Wang, D., & Wu, L. (2024) · Nano Letters · doi:10.1021/acs.nanolett.4c00572 · Cited by 28
Yu, Y., Chen, W., Wang, X., Sun, X., Jiang, Z., Li, M., Fu, X., Yang, H., Li, M., & Wang, C. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c05129 · Cited by 28
Biodegradable, strong, and clear wood package for plastic alternative
Tang, J., Fan, X., Huang, H., Dong, X., Li, X., Wang, P., Yin, R., Xie, Y., Li, J., Tan, G., et al. (2024) · Nano Research · doi:10.1007/s12274-024-6831-y · Cited by 28
Lv, T., Huang, J., Liu, W., & Zhang, R. (2020) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2020.100596 · Cited by 28
Wang, C., Biswas, S. K., & Okubayashi, S. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c00799 · Cited by 28
Ice‐Mediated Reactions and Assemblies in Diverse Domains
Wang, D., Wu, J., Wu, S., Chen, X., Li, W., Chen, X., Gao, C., & He, Z. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202315532 · Cited by 27
Multifunctional Biocomposite Materials from Chlorella vulgaris Microalgae
Kellersztein, I., Tish, D., Pederson, J., Bechthold, M., & Daraio, C. (2024) · Advanced Materials · doi:10.1002/adma.202413618 · Cited by 27
Role of Lignin in Hot-Pressing of Paper: Insights from Molecular Simulations and Experiments
Elf, P., Mattsson, A., Paajanen, A., Ketoja, J. A., Pettersson, G., Sanchez-Salvador, J. L., Blanco, Á., Negro, C., Engstrand, P., Hedenqvist, M. S., et al. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00872 · Cited by 27
Cui, J., Rao, Y., Gao, J., Zhang, H., Lin, C., Zhao, J., Zeng, J., Fang, C., Wang, Z., Wen, J., et al. (2026) · Nature Communications · doi:10.1038/s41467-026-70411-5 · Cited by 27
Self-citationQiao, Q., Li, X., & Huang, L. (2019) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.9b00701 · Cited by 27
Influence of densification on mechanical properties of thermally pretreated spruce and poplar wood
Pelit, H., & Yorulmaz, R. (2019) · BioResources · doi:10.15376/biores.14.4.9739-9754 · Cited by 27
Zou, M., Tang, Q., & Guo, W. (2022) · Polymer Composites · doi:10.1002/pc.26571 · Cited by 27
Mastantuoni, G. G., Tran, V. C., Engquist, I., Berglund, L. A., & Zhou, Q. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202201597 · Cited by 27
Metadata
- Authors
- Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., Yao, Y., Gong, A., Leiste, U. H., Bruck, H. A., Zhu, J. Y., Vellore, A., Li, H., Minus, M. L., Jia, Z., Martini, A., Li, T., & Hu, L.
- Affiliations
- University of Maryland, College Park (US)
- Forest Products Laboratory (US)
- University of California, Merced (US)
- Northeastern University (US)
- Corresponding author
- Li, Teng
- Hu, Liangbing
- ORCID
- Venue
- Nature
- Published
- 2018-02
- Volume
- 554
- Issue
- 7691
- Pages
- 224-228
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2787189653
- Semantic Scholar
- ebb83681967d065b6b47d483607fc793a03d5a10
- Cited by
- 1,632
- References
- 30
- Citations by year
- 2026: 212 · 2025: 211 · 2024: 253 · 2023: 240 · 2022: 217 · 2021: 156 · 2020: 173 · 2019: 122 · 2018: 48
- FWCI
- 99.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Nature (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- China Scholarship Council
- Topics
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- wood densification, lignin removal, hemicellulose removal, hot pressing, cellulose nanofibers, mechanical strength, toughness, ballistic resistance, dimensional stability, wood lignin
- MeSH terms
- Alloys, Cell Wall, Cellulose, Hot Temperature, Lignin, Metals, Molecular Weight, Polysaccharides, Sodium Hydroxide, Sulfites, Tensile Strength, Wood
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.