Processing bulk natural wood into a high-performance structural material
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
Synthetic structural materials with exceptional mechanical performance suffer from either large weight and adverse environmental impact (for example, steels and alloys) or complex manufacturing processes and thus high cost (for example, polymer-based and biomimetic composites). Natural wood is a low-cost and abundant material and has been used for millennia as a structural material for building and furniture construction. However, the mechanical performance of natural wood (its strength and toughness) is unsatisfactory for many advanced engineering structures and applications. Pre-treatment with steam, heat, ammonia or cold rolling followed by densification has led to the enhanced mechanical performance of natural wood. However, the existing methods result in incomplete densification and lack dimensional stability, particularly in response to humid environments, and wood treated in these ways can expand and weaken. Here we report a simple and effective strategy to transform bulk natural wood directly into a high-performance structural material with a more than tenfold increase in strength, toughness and ballistic resistance and with greater dimensional stability. Our two-step process involves the partial removal of lignin and hemicellulose from the natural wood via a boiling process in an aqueous mixture of NaOH and Na 2 SO 3 followed by hot-pressing, leading to the total collapse of cell walls and the complete densification of the natural wood with highly aligned cellulose n…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“new wood-based products such as cross-laminated timber and acetylated wood 87 -which are aimed at new markets-also have potential.”
From The technological and economic prospects for CO2 utilization and removal (2019) · cites this paper as [87]
In the citing paper
“The application of wood nanotechnology for producing bioinspired functional materials, with a particular emphasis on novel nanotechnological approaches for developing new wood-based materials, has been developed for sustainable use in various production systems.276,278,279”
From Technologies and perspectives for achieving carbon neutrality (2021) · cites this paper as [278]
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
High tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Recent developments in advanced aircraft aluminium alloys
Dursun, T., & Soutis, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.12.002 · Cited by 2,807
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
Structural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Kim, S.-H., Kim, H., & Kim, N. J. (2015) · Nature · doi:10.1038/nature14144 · Cited by 830
Microstructures and Mechanical Properties of High‐Strength Fe‐Mn‐Al‐C Light‐Weight TRIPLEX Steels
Frommeyer, G., & Brüx, U. (2006) · steel research international · doi:10.1002/srin.200606440 · Cited by 660
Cited by
Items 601–700 of 1,001
Ricci, W. A., & Fahl, N. (2023) · Journal of Esthetic and Restorative Dentistry · doi:10.1111/jerd.13021 · Cited by 27
Engineering lignocellulose-based composites for advanced structural materials
Duan, Y., Liu, K., Qi, J., Li, C., Xie, H., Du, H., Xu, T., & Si, C. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117562 · Cited by 27
Tunable Epsilon‐and‐Mu‐Near‐Zero Metacomposites
Dai, J., Jiang, H., Guo, Z., & Qiu, J. H. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202308338 · Cited by 27
Self-citationChu, D., Mu, J., Avramidis, S., Rahimi, S., Liu, S., & Lai, Z. (2019) · Forests · doi:10.3390/f10110955 · Cited by 27
“(2018) successfully created a high-performance structural compressed wood via partial removal of lignin and hemicellulose and hot-pressing into highly aligned cellulose nanofibers, resulting in specific strength higher than that of most structural metals and alloys [9].”
BackgroundWei, Q., Gu, B., & Sun, B. (2020) · International Journal of Damage Mechanics · doi:10.1177/1056789520927074 · Cited by 27
“Many methods for designing high-performance bulletproof materials have been developed from structure optimizations and materials hybrid (Bonyi et al., 2019; Patil and Naik, 2018; Song et al., 2018).”
MethodNanocellulose-reinforced phenol-formaldehyde resin for plywood panel production
Lengowski, E. C., Júnior, E. A. B., Dallo, R., Nisgoski, S., de Mattos, J. L. M., & Prata, J. G. (2020) · Maderas Ciencia y tecnología · doi:10.4067/s0718-221x2021000100405 · Cited by 27
“The use of solid wood presents some disadvantages because it is heterogenous and anisotropic (Torquato 2002, Fratzl and Weinkamer 2007, Buligon 2015), and in many cases the mechanical properties of wood are unsatisfactory for certain uses (Song et al. 2018).”
BackgroundIslam, M. N., & Jiang, Y. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c01806 · Cited by 27
The Influence of Hydrogen Bonding in Wood and Its Modification Methods: A Review
Zhang, T., Hu, Y., Dong, Y., Jiang, S., & Han, X. (2025) · Polymers · doi:10.3390/polym17152064 · Cited by 26
“This mechanism increases crack resistance and at the same time significantly increases slip resistance between adjacent fibers, which ultimately increases the strength and viscosity of the whole tree [123].”
Jiang, L., Lei, Y., Liu, Q., Wang, Y., Zhao, Y., & Lei, J. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08394-3 · Cited by 26
Sun, Y., Zhang, N., Pan, X., Zhong, W., Qiu, B., Cai, Y., & Yuan, Y. (2021) · International Journal of Energy Research · doi:10.1002/er.7122 · Cited by 26
“Fortunately, DW preserves the porous structure and mechanical behavior of original wood.(39,40) Hence, DW is conducive to the formation of FSPCMs as supporting material.”
BackgroundLiquid-phase deposition functionalized wood sponges for oil/water separation
Liu, Y., Huang, Y., Huang, Q.-F., Li, F., & Liu, X. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06440-w · Cited by 26
Preparation of bamboo-epoxy resin materials with microwave assistance
Liu, Z., Yang, S., Wang, Z., Ji, N., Li, D., & Wu, Y. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.04.007 · Cited by 26
Holocellulosic fibers and nanofibrils using peracetic acid pulping and sulfamic acid esterification
Chen, Y., Li, Y., Zhang, C., Qi, H., & Hubbe, M. A. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119902 · Cited by 26
Self-citationPhosphorylated wood designed as a biosorbent for effectively removing Ni2+ from wastewater
Huo, H., Yu, Y., Zhang, X., Tang, M., Chen, C., Wang, S., & Min, D. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.115727 · Cited by 26
Self-citationYang, Y., Zhang, L., Zhang, J., Ren, Y., Huo, H., Zhang, X., Huang, K., & Zhang, Z. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c19844 · Cited by 26
iWood: An Intelligent Iontronic Device for Human‐Wood Interactions
Li, B., Ge, R., Du, W., Wang, Z., Peng, T., Wang, R., Chang, Y., & Pan, T. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314190 · Cited by 26
Flame Retardancy of Densified Wood Modified by Bio-Material Based Flame Retardant
Gao, Y., Feng, S., Yan, L., Chu, T., Wang, Z., Xiao, J., Xie, H., Zhang, J., & Wang, Z. (2024) · Fire Technology · doi:10.1007/s10694-024-01594-w · Cited by 26
Xiao, F., Peng, W., Li, K., Yuan, B., Fontaine, G., & Bourbigot, S. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.142360 · Cited by 26
Fang, C.-H., Cloutier, A., Jiang, Z.-H., He, J., & Fei, B. (2019) · BioResources · doi:10.15376/biores.14.2.3278-3288 · Cited by 26
Microstructure and wear properties of SiC woodceramics reinforced high-chromium cast iron
Huang, T.-X., Li, Z., Huang, Y., Li, Y., & Xiao, P. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.08.217 · Cited by 26
Self-citationPelit, H., & Emiroglu, F. (2020) · Holzforschung · doi:10.1515/hf-2020-0075 · Cited by 26
Metal‐Ion Induced Surface Modification for Durable Hydrophobic Wood
Song, L. Y., Zhang, X., Wang, Z., Bai, Y., Feng, Y., & Yao, J. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.202001166 · Cited by 26
Mechanics of cellulose nanopaper using a scalable coarse-grained modeling scheme
Ray, U., Pang, Z., & Li, T. (2021) · Cellulose · doi:10.1007/s10570-021-03740-x · Cited by 26
Self-citationMechanical Properties of Douglas Fir Wood at Elevated Temperatures under Nitrogen Conditions
Yue, K., Wu, J., Wang, F., Chen, Z., & Lu, W. (2021) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0004072 · Cited by 26
Zuo, S., Liang, Y., Yang, H., Ma, X., Ge, S., Wu, Y., Fei, B., Guo, M. H., Ahamad, T., Sinh, L. H., et al. (2022) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2022.106736 · Cited by 26
Using environmentally friendly technology for fabricating special plywood with ultra-high strength
Zuo, S., Liang, Y., Wu, Y., Ge, S., Shi, J., Ma, X., Cai, L., Li, J., Lam, S. S., & Xia, C. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136462 · Cited by 26
Mania, P., Kupfernagel, C., & Curling, S. (2024) · Forests · doi:10.3390/f15060892 · Cited by 25
“Delignification was performed using the laboratory method, according to Song et al. [38] and Mania et al. [39].”
BackgroundMethodYu, S., Hu, Y., Cao, T., Zhu, Y., Li, H., You, T., & Xu, F. (2025) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2025.102070 · Cited by 25
Self-citationZhu, X. F., Hu, J., Liu, G., Xu, D., Yuan, W., Li, D., Chang, S., Li, X., & Liu, Y. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05478-6 · Cited by 25
Rao, A., Divoux, T., Owens, C. E., & Hart, A. J. (2022) · Cellulose · doi:10.1007/s10570-021-04384-7 · Cited by 25
Xu, D., Zhang, Q., Lan, Y., Zeng, Q., Fan, M., Chen, L., & Zhao, W. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.115691 · Cited by 25
Superflexible Artificial Soft Wood
Gao, Y., Yu, Z., Qin, B., Chen, C., Ma, Z., & Yu, S. (2023) · Advanced Materials · doi:10.1002/adma.202303518 · Cited by 25
Self-citationZheng, K., & Xiao, L. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125902 · Cited by 25
Plant Vascular Tissues—Connecting Tissue Comes in All Shapes
Hellmann, E., Ko, D., Ruonala, R., & Helariutta, Y. (2018) · Plants · doi:10.3390/plants7040109 · Cited by 25
Nanocellulose Composite Biomaterials in Industry and Medicine
Shoseyov, O., Kam, D., Shalom, T. B., Shtein, Z., Vinkler, S., & Posen, Y. (2019) · Biologically-inspired systems · doi:10.1007/978-3-030-12919-4_17 · Cited by 25
Moreira, R. L. P. O., Simão, J. A., Gouveia, R. F., & Strauss, M. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00038 · Cited by 25
Photoresponsive wood composite for photoluminescence and ultraviolet absorption
Li, Y., Gu, X. F., Gao, H., & Li, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119984 · Cited by 25
Self-citationHan, S., Chen, F., Li, H., & Wang, G. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110254 · Cited by 25
Self-citationSelf-densified super-strong wood
Huang, D., Li, J., Li, S., Hu, J., Cao, Z., Guo, Y., Ding, Y. S., Zhu, M., & Chen, Y. (2025) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2025.03.001 · Cited by 25
Self-citationStandardization challenges of biomass-based carbon electrodes for supercapacitors
Jose, R., & Yang, C. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.181012 · Cited by 24
Lin, X., Wang, H., Wu, Y., & He, S. (2025) · ACS Nano · doi:10.1021/acsnano.5c06162 · Cited by 24
Zhou, T., Shao, Z., Sun, Z., Li, Y., Zhang, Q., Li, K., Hou, C., & Wang, H. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202509358 · Cited by 24
Self-citationMeng, Y., Wu, F., Li, Y., Xiang, Z., Luo, M., Sheng, X., & Xie, D. (2026) · Advanced Energy Materials · doi:10.1002/aenm.70872 · Cited by 26
“By rationally regulating these primary constituents through “top-down” selective delignification, the porosity and surface chemistry can be tailored to transform raw wood into a highly efficient encapsulation host [17].”
Self-citationXiang, W., Preisig, N., Laine, C., Hjelt, T., Tardy, B. L., Stubenrauch, C., & Rojas, O. J. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00243 · Cited by 24
Sanabria, S. J., Baensch, F., Zauner, M., & Niemz, P. (2020) · Scientific Reports · doi:10.1038/s41598-020-78028-4 · Cited by 24
Zhao, X., Chen, S., Wu, Z., Sheng, N., Zhang, M., Liang, Q., Han, Z., & Wang, H. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119133 · Cited by 24
Influence of delignification on plastic flow deformation of wood
Seki, M., Yashima, Y., Abe, M., Miki, T., & Nishida, M. (2022) · Cellulose · doi:10.1007/s10570-022-04555-0 · Cited by 24
Numerical simulation of transverse compression and densification of wood
Shi, Y., Eichhorn, S. J., & Toumpanaki, E. (2022) · Wood Science and Technology · doi:10.1007/s00226-022-01388-9 · Cited by 24
“4 a Final state of densified wood after compressed by FE simulation and b comparison of the microstructure of an FE modelled material (left) and an image of the microstructure of real densified wood (right) (Song et al. 2018)”
BackgroundMethodLi, L., Qian, X., & Shen, J. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119728 · Cited by 24
Recent Advances in Self-Assembly and Application of Para-Aramids
Xie, C., Yang, S., He, R., Liu, J., Chen, Y., Guo, Y., Guo, Z., Qiu, T., & Tuo, X. (2022) · Molecules · doi:10.3390/molecules27144413 · Cited by 24
Bioinspired polymeric heart valves derived from polyurethane and natural cellulose fibers
Guo, F., Han, R., Ying, J., Zhang, Z., Yang, R. L., & Zhang, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.09.063 · Cited by 24
Chhajed, M., Verma, C., Gupta, P., & Maji, P. K. (2022) · Cellulose · doi:10.1007/s10570-022-04993-w · Cited by 24
Fan, Z., Ye, G., Li, S., Bai, Z., Yong, Q., Zhang, Y., & Hu, Y. (2023) · Structures · doi:10.1016/j.istruc.2023.01.087 · Cited by 24
Hydrogen-bond assisted nonconventional photoluminescence of crystalline and amorphous cellulose
Jin, K., Song, G., Diao, H., Zhang, X., Ji, X., Zhang, J., & Zhang, J. P. (2023) · Cellulose · doi:10.1007/s10570-023-05392-5 · Cited by 25
Yi, L. Z., Zhuang, Y., Ding, Y., Gong, J., Chu, T., & Wang, Z. (2023) · Fire Safety Journal · doi:10.1016/j.firesaf.2023.104086 · Cited by 24
Research Progress of Reinforced Modification of Fast-Growing Wood
Zhang, Z., Guo, Q., Huang, X., Zhang, Q., Fan, J., & Huang, J. (2023) · Coatings · doi:10.3390/coatings14010053 · Cited by 24
Dong, H., Wang, T., Liu, F., Luo, Z., Gao, X., & Cai, M. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.129588 · Cited by 24
Han, S., Hu, X., Tao, Y., Li, S., Xia, C., & Wang, G. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.139921 · Cited by 24
Strengthening of Wood-like Materials via Densification and Nanoparticle Intercalation
Novel, D., Ghio, S., Gaiardo, A., Picciotto, A., Guidi, V., Speranza, G., Boscardin, M., Bellutti, P., & Pugno, N. M. (2020) · Nanomaterials · doi:10.3390/nano10030478 · Cited by 24
“These enhancements in mechanical properties are caused by the addition of nanomaterials, which improves the interfacial adhesion between CMFs. Densified nanocomposites fall into the density category of biological materials designed to work under tension, such as tendons, but they show higher strength.”
BackgroundMethodInfluentialLightweight and Construable Magnetic Wood for Electromagnetic Interference Shielding
Cheng, Z., Wei, Y., Liu, C., Chen, Y., Ma, Y., Chen, H., Liang, X., Sun, N. X., & Zhu, H. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000257 · Cited by 24
Flexible, Strong, Anisotropic Wood‐Derived Conductive Circuit
Sun, H. Y., Ji, T., Bi, H., Lin, X., Chen, C., Xu, M., Cai, L., & Huang, Z. (2021) · Advanced Sustainable Systems · doi:10.1002/adsu.202100040 · Cited by 24
Self-citationSurface Adsorption in PEG/Hydroxyapatite and PEG/Dickite Composite Phase Change Materials
Zheng, F., Wang, C., Huang, K., & Li, J. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c00885 · Cited by 24
Zhang, X., Zhang, T., An, X., Li, M., Pei, D., Zhang, J., & Li, C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132060 · Cited by 24
Kurei, T., Hioki, Y., Kose, R., Nakaba, S., Funada, R., & Horikawa, Y. (2021) · Cellulose · doi:10.1007/s10570-021-04160-7 · Cited by 24
Ge, J., Li, F., Gao, Y., Jin, J., & Jiang, W. J. (2021) · Cellulose · doi:10.1007/s10570-021-04264-0 · Cited by 24
“The cellulose peak at 1420 cm-1 is still reserved in the DS, and the hydroxy groups and hydrogen bonds at 3320 cm-1 are also preserved in the DS. Theoretically, the mixed solution of NaOH and Na2SO3 can dissolve lignin and hemicellulose (Song et al. 2018).”
BackgroundMethodInfluentialMa, C., An, X., & Guo, M. (2025) · Water Research · doi:10.1016/j.watres.2025.124129 · Cited by 23
High-performance green electronic substrate employing flexible and transparent cellulose films
Sun, Y., Chen, D., Li, Y., Sun, S., Zheng, J., Cui, J., Wang, G., Zheng, L. X., Wang, Y., & Zhou, H. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118359 · Cited by 23
Self-citationNew strategy for the preparation of ultra-high-strength wood-epoxy polymer composites
Guo, D., Yang, S., Fu, F., Li, G., & Chu, F. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101191 · Cited by 23
Ginkgo seed shell provides a unique model for bioinspired design
Zhang, Y., Mao, J., Peng, J., Tomsia, A. P., Jiang, L., & Cheng, Q. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2211458119 · Cited by 23
“The lignin fluorescence spectrum covers almost the entire visible light spectrum (29–31).”
Liu, X., Lei, Y., Zhu, X. F., Liu, G., Wang, C., Chang, S., Zhang, X., & Hu, J. (2022) · Environmental Research · doi:10.1016/j.envres.2022.115170 · Cited by 23
Durability of Plant Fiber Composites for Structural Application: A Brief Review
Jia, Y., Fiedler, B., Yang, W., Feng, X., Tang, J., Liu, J., & Zhang, P. (2023) · Materials · doi:10.3390/ma16113962 · Cited by 24
“Among the constituents found in fibers, cellulose stands out as the most rigid and the strongest organic component [28].”
BackgroundHigh-Strength and UV-Shielding Transparent Thin Films from Hot-Pressed Sulfonated Wood
Mastantuoni, G. G., Li, L., Chen, H., Berglund, L. A., & Zhou, Q. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c02559 · Cited by 23
Redesigning Natural Materials for Energy, Water, Environment, and Devices
Liu, X., Zhu, W., Deng, P., & Li, T. (2023) · ACS Nano · doi:10.1021/acsnano.3c04065 · Cited by 23
Self-citationChen, G., & Luo, H. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133711 · Cited by 23
Yang, W., Wang, D., Feng, S., He, S., Xiao, H., Dai, H., & Han, J. (2024) · Green Chemistry · doi:10.1039/d3gc05124b · Cited by 23
Li, X., Ye, H., Zhao, X., Li, Y., & Wang, G. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111662 · Cited by 23
Self-citationGenome-edited trees for high-performance engineered wood
Liu, Y., Li, G., Mao, Y., Gao, Y., Zhao, M., Brozena, A. H., Wang, D., von Keitz, S., Meng, T., Kim, H., et al. (2024) · Matter · doi:10.1016/j.matt.2024.07.003 · Cited by 23
Self-citationSenf, D., Ruprecht, C., Kishani, S., Matic, A., Toríz, G., Gatenholm, P., Wågberg, L., & Pfrengle, F. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201806871 · Cited by 23
Lv, S., Kong, X., Wang, L., Zhang, F., & Lei, X. (2019) · New Journal of Chemistry · doi:10.1039/c9nj04170b · Cited by 23
Li, Z., Li, X., Ren, J., Wu, B., Luo, Q., Liu, X., & Pei, C. (2020) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.9b07671 · Cited by 23
Chen, P., Xie, F., Tang, F., & McNally, T. (2020) · ACS Omega · doi:10.1021/acsomega.0c02418 · Cited by 23
Wang, L., Wang, H., Liu, C., Xu, Y., Ma, S., Zhuang, Y., Zhang, Q., Yang, H., & Xu, W. (2020) · Cellulose · doi:10.1007/s10570-020-03359-4 · Cited by 23
“…materials with hierarchically porous structures, excellent mechanical properties, and tuneable multifunctionality in energy storage systems and photothermal conversion devices has attracted attention for the past decade (Li et al. 2018; Shen et al. 2016; Wang et al. 2017b; Yuan et al. 2017).”
BackgroundEML Webinar Overview: Advanced materials toward a sustainable future—Mechanics design
Li, T. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.101107 · Cited by 23
Self-citationYahyaee, S. M. H., Dastoorian, F., Ghorbani, M., & Zabihzadeh, S. M. (2021) · European Journal of Wood and Wood Products · doi:10.1007/s00107-021-01756-5 · Cited by 23
Bioinspired self-flowing wood chemical treatment
Wang, X., & Shi, S. Q. (2025) · Nature Communications · doi:10.1038/s41467-024-55782-x · Cited by 22
Supramolecular chemistry of cellulose-based electrolytes
Zeng, S., Qin, Q., Jiang, S., Duan, G., Yu, R., He, S., Zhang, C., Han, X., Liao, X., Han, J., et al. (2025) · eScience · doi:10.1016/j.esci.2025.100511 · Cited by 22
Mei, Y., Liu, J., Cui, Y., Li, F., Tang, X., Sun, M., Chi, R., Zhang, Y., Zhang, A., & Chen, K. (2021) · Scientific Reports · doi:10.1038/s41598-021-01308-0 · Cited by 22
Lignum vitae wood-derived composites for high lubricating performance
Wu, Z., Guo, Z., Yuan, C., Huang, Q., Wang, C., & Zhao, H. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137086 · Cited by 22
Dong, X., Song, R., Wang, P., Tang, J., Wang, Y., Shang, Y., Xie, Y., Li, J., Song, J., & Gan, W. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202308361 · Cited by 22
Self-citationNanocellulose‐Based Ink for Vertically 3D Printing Micro‐Architectures with High‐Resolution
Shi, G., Tian, M., Chen, Y., Zhong, L., Zhang, W., Chen, Z., Sun, S., Xia, R., Iwuoha, E. I., & Peng, X. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202311060 · Cited by 22
Wang, Y.-Y., Li, Y., Zhu, W., & Fu, S. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118292 · Cited by 22
Self-citationLight-weight, wood-derived, biomorphic SiC ceramics by carbothermal reduction
Zhou, X., Xu, H., Xu, J.-Q., Ren, Y., Zhi, Q., Zhang, N., Wei, Z., Yang, J., Wang, B., & Ishizaki, K. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.04.037 · Cited by 22
Flexible Wood‐Based X‐Ray Scintillator Film Using Lead‐Free Cs3Cu2I5 Perovskite Nanoparticles
Moon, I. K., Yoo, S., Choi, J., Kim, H. K., & Kang, Y. (2024) · Small Structures · doi:10.1002/sstr.202400043 · Cited by 22
Chu, T., Fan, C., Liu, C., Feng, S., Wang, Z., & Liew, K. M. (2024) · Fire Safety Journal · doi:10.1016/j.firesaf.2024.104204 · Cited by 22
A multiscale mechanics model for elastic properties of densified wood
Song, R., Deng, F., Liang, X., Song, J., Shen, S., & Li, T. (2024) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2024.105761 · Cited by 22
Self-citationPolysaccharides and their derivatives for solar-driven water evaporators
Su, M., Liu, F., Abdiryim, T., & Liu, X. (2024) · Cellulose · doi:10.1007/s10570-024-06075-5 · Cited by 22
“Cellulose materials have robust mechanical performances because of high crystal-linity of cellulose (Song et al. 2018).”
A high-sensitivity continuous glucose sensor using porous 3D cellulose/ carbon nanotube network
Wang, X., Dong, Z., Li, W., Xiao, D., Liu, G., Yu, Z., Yin, S., & Liang, M. (2024) · Talanta · doi:10.1016/j.talanta.2024.127201 · Cited by 23
A novel organic-inorganic hybrid ceramicizable intumescent coating for wood fire protection
Yan, C., Fang, Y., Yang, R., Yan, M., Wang, W., Song, Y., & Wang, Q. (2024) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2024.109037 · Cited by 22
Qiao, H., Li, L., Wu, J., Zhang, Y., Liao, Y., Zhou, H., & Li, D. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115883 · Cited by 22
High‐Strength and Tough Crystalline Polysaccharide‐Based Materials†
Wei, P., Cai, J., & Zhang, L. (2020) · Chinese Journal of Chemistry · doi:10.1002/cjoc.202000036 · Cited by 22
Metadata
- Authors
- Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., Yao, Y., Gong, A., Leiste, U. H., Bruck, H. A., Zhu, J. Y., Vellore, A., Li, H., Minus, M. L., Jia, Z., Martini, A., Li, T., & Hu, L.
- Affiliations
- University of Maryland, College Park (US)
- Forest Products Laboratory (US)
- University of California, Merced (US)
- Northeastern University (US)
- Corresponding author
- Li, Teng
- Hu, Liangbing
- ORCID
- Venue
- Nature
- Published
- 2018-02
- Volume
- 554
- Issue
- 7691
- Pages
- 224-228
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2787189653
- Semantic Scholar
- ebb83681967d065b6b47d483607fc793a03d5a10
- Cited by
- 1,632
- References
- 30
- Citations by year
- 2026: 212 · 2025: 211 · 2024: 253 · 2023: 240 · 2022: 217 · 2021: 156 · 2020: 173 · 2019: 122 · 2018: 48
- FWCI
- 99.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Nature (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- China Scholarship Council
- Topics
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- wood densification, lignin removal, hemicellulose removal, hot pressing, cellulose nanofibers, mechanical strength, toughness, ballistic resistance, dimensional stability, wood lignin
- MeSH terms
- Alloys, Cell Wall, Cellulose, Hot Temperature, Lignin, Metals, Molecular Weight, Polysaccharides, Sodium Hydroxide, Sulfites, Tensile Strength, Wood
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.