The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
A polymer scaffold for self-healing perovskite solar cells
Open accessAbstract
Advancing of the lead halide perovskite solar cells towards photovoltaic market demands large-scale devices of high-power conversion efficiency, high reproducibility and stability via low-cost fabrication technology, and in particular resistance to humid environment for long-time operation. Here we achieve uniform perovskite film based on a novel polymer-scaffold architecture via a mild-temperature process. These solar cells exhibit efficiency of up to ∼16% with small variation. The unencapsulated devices retain high output for up to 300 h in highly humid environment (70% relative humidity). Moreover, they show strong humidity resistant and self-healing behaviour, recovering rapidly after removing from water vapour. Not only the film can self-heal in this case, but the corresponding devices can present power conversion efficiency recovery after the water vapour is removed. Our work demonstrates the value of cheap, long chain and hygroscopic polymer scaffold in perovskite solar cells towards commercialization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Cited by
Kim, M., Kim, G.-H., Lee, T. K., Choi, I. W., Choi, H. W., Jo, Y., Yoon, Y. J., Kim, J. W., Lee, J., Huh, D., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.014 · Cited by 1,753
Mesoporous materials for energy conversion and storage devices
Li, W., Liu, J., & Zhao, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.23 · Cited by 1,388
Understanding the physical properties of hybrid perovskites for photovoltaic applications
Huang, J., Yuan, Y., Shao, Y., & Yan, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.42 · Cited by 1,252
Self-citationStable High‐Performance Perovskite Solar Cells via Grain Boundary Passivation
Niu, T., Lu, J., Munir, R., Li, J., Barrit, D., Zhang, X., Hu, H., Yang, Z., Amassian, A., Zhao, K., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706576 · Cited by 797
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Self‐Healing Polymers Based on Coordination Bonds
Li, C., & Zuo, J. (2020) · Advanced Materials · doi:10.1002/adma.201903762 · Cited by 717
Kang, J., Tok, J. B.-H., & Bao, Z. (2019) · Nature Electronics · doi:10.1038/s41928-019-0235-0 · Cited by 706
Li, X., Cao, F., Yu, D., Chen, J., Sun, Z., Shen, Y., Zhu, Y., Wang, L., Wei, Y., Wu, Y., et al. (2017) · Small · doi:10.1002/smll.201603996 · Cited by 704
Self-citationLi, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Han, T.-H., Lee, J.-W., Choi, C., Tan, S., Lee, C., Zhao, Y., Dai, Z., De Marco, N., Lee, S.-J., Bae, S.-H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08455-z · Cited by 588
Self-citationSuppressed Ion Migration in Low-Dimensional Perovskites
Lin, Y., Bai, Y., Fang, Y., Wang, Q., Deng, Y., & Huang, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00442 · Cited by 579
Impact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Zhao, Y.-C., Zhou, W.-K., Zhou, X., Liu, K.-H., Yu, D.-P., & Zhao, Q. (2016) · Light: Science & Applications · doi:10.1038/lsa.2016.243 · Cited by 478
Self-citationImproving the Stability of Metal Halide Perovskite Materials and Light‐Emitting Diodes
Cho, H., Kim, Y., Wolf, C., Lee, H., & Lee, T. (2018) · Advanced Materials · doi:10.1002/adma.201704587 · Cited by 470
Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications
Yang, D., Yang, R., Priya, S., & Liu, S. (. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201809781 · Cited by 461
Recent Progress on the Long‐Term Stability of Perovskite Solar Cells
Fu, Q., Tang, X., Huang, B., Hu, T., Tan, L., Chen, L., & Chen, Y. (2018) · Advanced Science · doi:10.1002/advs.201700387 · Cited by 454
Advanced Materials for Use in Soft Self‐Healing Devices
Huynh, T., Sonar, P., & Haick, H. (2017) · Advanced Materials · doi:10.1002/adma.201604973 · Cited by 443
Xing, J., Wang, Q., Dong, Q., Yuan, Y., Fang, Y., & Huang, J. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06496e · Cited by 437
A Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
Excitons in Metal‐Halide Perovskites
Baranowski, M., & Plochocka, P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903659 · Cited by 425
Device stability of perovskite solar cells – A review
Asghar, M. I., Zhang, J., Wang, H., & Lund, P. D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.003 · Cited by 423
Surface Engineering of Ambient-Air-Processed Cesium Lead Triiodide Layers for Efficient Solar Cells
Yoon, S. M., Min, H., Kim, J. B., Kim, G., Lee, K. S., & Seok, S. I. (2021) · Joule · doi:10.1016/j.joule.2020.11.020 · Cited by 418
Bai, Y., Dong, Q., Shao, Y., Deng, Y., Wang, Q., Shen, L., Wang, D., Wei, W., & Huang, J. (2016) · Nature Communications · doi:10.1038/ncomms12806 · Cited by 417
Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells
Liu, Z., Hu, J., Jiao, H., Li, L., Zheng, G., Chen, Y., Huang, Y., Zhang, Q., Shen, C., Chen, Q., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606774 · Cited by 383
Polymer Doping for High‐Efficiency Perovskite Solar Cells with Improved Moisture Stability
Jiang, J., Wang, Q., Jin, Z., Zhang, X., Lei, J., Bin, H., Zhang, Z., Li, Y., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701757 · Cited by 379
Li, T., Pan, Y., Wang, Z., Xia, Y., Chen, Y., & Huang, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01798g · Cited by 370
Kim, M., Motti, S. G., Sorrentino, R., & Petrozza, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01101j · Cited by 344
Wei, D., Ma, F., Wang, R., Dou, S., Cui, P., Huang, H., Ji, J., Jia, E., Jia, X., Sajid, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707583 · Cited by 330
Li, X., Zhang, W., Wang, Y.-C., Zhang, W., Wang, H.-Q., & Fang, J. (2018) · Nature Communications · doi:10.1038/s41467-018-06204-2 · Cited by 329
Rong, Y., Hou, X., Hu, Y., Mei, A., Liu, L., Wang, P., & Han, H. (2017) · Nature Communications · doi:10.1038/ncomms14555 · Cited by 324
Cao, Q., Li, Y., Zhang, H., Yang, J., Han, J., Xu, T., Wang, S., Wang, Z., Gao, B., Zhao, J., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg0633 · Cited by 322
Self-Healing Polymers for Electronics and Energy Devices
Zhou, Y., Li, L., Han, Z., Li, Q., He, J., & Wang, Q. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00231 · Cited by 289
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Self‐Healing Materials for Next‐Generation Energy Harvesting and Storage Devices
Chen, D., Wang, D., Yang, Y., Huang, Q., Zhu, S., & Zheng, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700890 · Cited by 273
Emerging Semitransparent Solar Cells: Materials and Device Design
Tai, Q., & Yan, F. (2017) · Advanced Materials · doi:10.1002/adma.201700192 · Cited by 262
Mechanisms and Suppression of Photoinduced Degradation in Perovskite Solar Cells
Wei, J., Wang, Q., Huo, J., Gao, F., Gan, Z., Zhao, Q., & Li, H. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002326 · Cited by 260
Self-citationSolution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Faheem, M. B., Khan, B., Feng, C., Farooq, M. U., Raziq, F., Xiao, Y., & Li, Y. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02338 · Cited by 254
Recent progress in perovskite solar cells: from device to commercialization
Luo, X., Lin, X., Gao, F., Zhao, Y., Li, X., Zhan, L., Qiu, Z., Wang, J., Chen, C., Meng, L., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1426-x · Cited by 142
Self-citation
Metadata
- Authors
- Zhao, Y., Wei, J., Li, H., Yan, Y., Zhou, W., Yu, D., & Zhao, Q.
- Venue
- Nature Communications
- Published
- 2016-01-06
- Volume
- 7
- Issue
- 1
- Pages
- 10228-10228
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2397919288
- Cited by
- 667
- References
- 35
- FWCI
- 40.25
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.