The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Synthesis of three-dimensionally interconnected sulfur-rich polymers for cathode materials of high-rate lithium–sulfur batteries
Open accessAbstract
Elemental sulfur is one of the most attractive cathode active materials in lithium batteries because of its high theoretical specific capacity. Despite the positive aspect, lithium–sulfur batteries have suffered from severe capacity fading and limited rate capability. Here we report facile large-scale synthesis of a class of organosulfur compounds that could open a new chapter in designing cathode materials to advance lithium–sulfur battery technologies. Porous trithiocyanuric acid crystals are synthesized for use as a soft template, where the ring-opening polymerization of elemental sulfur takes place along the thiol surfaces to create three-dimensionally interconnected sulfur-rich phases. Our lithium–sulfur cells display discharge capacity of 945 mAh g−1 after 100 cycles at 0.2 C with high-capacity retention of 92%, as well as lifetimes of 450 cycles. Particularly, the organized amine groups in the crystals increase Li+-ion transfer rate, affording a rate performance of 1210, mAh g−1 at 0.1 C and 730 mAh g−1 at 5 C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Wu, Z.-S., Ren, W., Wen, L., Gao, L., Zhao, J., Chen, Z., Zhou, G., Li, F., & Cheng, H.-M. (2010) · ACS Nano · doi:10.1021/nn100740x · Cited by 2,446
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
High-performance lithium-ion anodes using a hierarchical bottom-up approach
Magasinski, A., Dixon, P., Hertzberg, B., Kvit, A., Ayala, J., & Yushin, G. (2010) · Nature Materials · doi:10.1038/nmat2725 · Cited by 2,044
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
The use of elemental sulfur as an alternative feedstock for polymeric materials
Chung, W. J., Griebel, J. J., Kim, E. T., Yoon, H., Simmonds, A. G., Ji, H. J., Dirlam, P. T., Glass, R. S., Wie, J. J., Nguyen, N. A., et al. (2013) · Nature Chemistry · doi:10.1038/nchem.1624 · Cited by 1,455
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Zheng, G., Zhang, Q., Cha, J. J., Yang, Y., Li, W., Seh, Z. W., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl304795g · Cited by 705
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
Ji, L., Rao, M., Aloni, S., Wang, L., Cairns, E. J., & Zhang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02256c · Cited by 602
Lithium/sulfur batteries with high specific energy: old challenges and new opportunities
Song, M.-K., Cairns, E. J., & Zhang, Y. (2013) · Nanoscale · doi:10.1039/c2nr33044j · Cited by 522
Zhou, J., Li, R., Fan, X., Chen, Y., Han, R., Li, W., Zheng, J., Wang, B., & Li, X. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01382d · Cited by 492
Yin, L., Wang, J., Lin, F., Yang, J., & Nuli, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03495f · Cited by 484
Tailoring Porosity in Carbon Nanospheres for Lithium–Sulfur Battery Cathodes
He, G., Evers, S., Liang, X., Cuisinier, M., Garsuch, A., & Nazar, L. F. (2013) · ACS Nano · doi:10.1021/nn404439r · Cited by 475
New insights into the limiting parameters of the Li/S rechargeable cell
Barchasz, C., Leprêtre, J., Alloin, F., & Patoux, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.021 · Cited by 398
Zhou, W., Xiao, X., Cai, M., & Yang, L. (2014) · Nano Letters · doi:10.1021/nl502238b · Cited by 382
Xi, K., Cao, S., Peng, X., Ducati, C., Vasant Kumar, R., & Cheetham, A. K. (2013) · Chemical Communications · doi:10.1039/c3cc38009b · Cited by 376
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Chen, S.-R., Zhai, Y.-P., Xu, G.-L., Jiang, Y.-X., Zhao, D.-Y., Li, J.-T., Huang, L., & Sun, S.-G. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.005 · Cited by 346
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Highly Reversible Lithium/Dissolved Polysulfide Batteries with Carbon Nanotube Electrodes
Fu, Y., Su, Y., & Manthiram, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301250 · Cited by 334
High-rate lithium–sulfur batteries promoted by reduced graphene oxide coating
Li, N., Zheng, M., Lu, H., Hu, Z., Shen, C., Chang, X., Ji, G., Cao, J., & Shi, Y. (2012) · Chemical Communications · doi:10.1039/c2cc17912a · Cited by 331
Lu, S., Cheng, Y., Wu, X., & Liu, J. (2013) · Nano Letters · doi:10.1021/nl400543y · Cited by 319
A Solid Sulfur Cathode for Aqueous Batteries
Peramunage, D., & Licht, S. L. (1993) · Science · doi:10.1126/science.261.5124.1029 · Cited by 285
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie · doi:10.1002/ange.201205292 · Cited by 284
A Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
Copper‐Stabilized Sulfur‐Microporous Carbon Cathodes for Li–S Batteries
Zheng, S., Yi, F., Li, Z., Zhu, Y., Xu, Y., Luo, C., Yang, J., & Wang, C. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304156 · Cited by 217
Ye, H., Yin, Y.-X., Xin, S., & Guo, Y.-G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10735c · Cited by 201
3D Hyperbranched Hollow Carbon Nanorod Architectures for High‐Performance Lithium‐Sulfur Batteries
Chen, S., Huang, X., Liu, H., Sun, B., Yeoh, W., Li, K., Zhang, J., & Wang, G. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301761 · Cited by 174
Griebel, J. J., Li, G., Glass, R. S., et al. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27314 · Cited by 152
Cited by
Redox-Active Polymers for Energy Storage Nanoarchitectonics
Kim, J., Kim, J. H., & Ariga, K. (2017) · Joule · doi:10.1016/j.joule.2017.08.018 · Cited by 549
Sulfur and Its Role In Modern Materials Science
Boyd, D. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201604615 · Cited by 512
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Metadata
- Authors
- Kim, H., Lee, J., Ahn, H., Kim, O., & Park, M. J.
- Venue
- Nature Communications
- Published
- 2015-06-12
- Volume
- 6
- Issue
- 1
- Pages
- 7278-7278
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2226018809
- Cited by
- 428
- References
- 45
- FWCI
- 21.33
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.