Flexible and self-powered temperature–pressure dual-parameter sensors using microstructure-frame-supported organic thermoelectric materials
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Skin-like temperature- and pressure-sensing capabilities are essential features for the next generation of artificial intelligent products. Previous studies of e-skin and smart elements have focused on flexible pressure sensors, whereas the simultaneous and sensitive detection of temperature and pressure with a single device remains a challenge. Here we report developing flexible dual-parameter temperature–pressure sensors based on microstructure-frame-supported organic thermoelectric (MFSOTE) materials. The effective transduction of temperature and pressure stimuli into two independent electrical signals permits the instantaneous sensing of temperature and pressure with an accurate temperature resolution of <0.1 K and a high-pressure-sensing sensitivity of up to 28.9 kPa−1. More importantly, these dual-parameter sensors can be self-powered with outstanding sensing performance. The excellent sensing properties of MFSOTE-based devices, together with their unique advantages of low cost and large-area fabrication, make MFSOTE materials possess promising applications in e-skin and health-monitoring elements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“In Figure 7E, by taking advantage of independent thermoelectric and piezoresistive effects, a dual parameter device can simultaneously transduces temperature and pressure stimuli into separate electrical signals.[107]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [107]
The cited source says what the claim attributes to it.
In the citing paper
“The development of novel dual-parameter sensors that transduce different stimuli into separate signals can minimize signal interference, allowing the detection of both temperature and pressure at a single point without decoupling analysis.[107,228,229]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [107]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
An ultra-lightweight design for imperceptible plastic electronics
Kaltenbrunner, M., Sekitani, T., Reeder, J., Yokota, T., Kuribara, K., Tokuhara, T., Drack, M., Schwödiauer, R., Graz, I., Bauer-Gogonea, S., et al. (2013) · Nature · doi:10.1038/nature12314 · Cited by 2,485
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Schwartz, G., Tee, B. C.-K., Mei, J., Appleton, A. L., Kim, D. H., Wang, H., & Bao, Z. (2013) · Nature Communications · doi:10.1038/ncomms2832 · Cited by 2,042
Someya, T., Sekitani, T., Iba, S., Kato, Y., Kawaguchi, H., & Sakurai, T. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0401918101 · Cited by 1,921
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
Ultrasensitive mechanical crack-based sensor inspired by the spider sensory system
Kang, D., Pikhitsa, P. V., Choi, Y. W., Lee, C., Shin, S. S., Piao, L., Park, B., Suh, K.-Y., Kim, T.-I., & Choi, M. (2014) · Nature · doi:10.1038/nature14002 · Cited by 1,626
Cited by
Items 401–500 of 667
Laser processing for electricity generators: Physics, methods and applications
Shen, D., Zhang, X., & Zhu, L. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.109182 · Cited by 25
Gao, Z., Zhang, L., Lei, H., Liu, Y., Gu, H., Xie, L., Lu, B., Ji, H., Wen, Z., & Sun, X. (2025) · ACS Nano · doi:10.1021/acsnano.5c00313 · Cited by 24
Zhang, Y., Zhang, L., Wang, Z., & Chen, G. (2025) · EnergyChem · doi:10.1016/j.enchem.2025.100181 · Cited by 23
Backbone-driven host–dopant miscibility modulates molecular doping in NDI conjugated polymers
Villalva, D. R., Singh, S., Galuska, L. A., Sharma, A., Han, J., Liu, J., Haque, M. A., Jang, S., Emwas, A. H., Koster, L. J. A., et al. (2021) · Materials Horizons · doi:10.1039/d1mh01357b · Cited by 27
Li, M., Xiong, Y., Wei, H., Yao, F., Han, Y., Du, Y., & Xu, D. (2023) · Nanoscale · doi:10.1039/d3nr01516e · Cited by 23
Ma, S., Jin, L., Huang, X., Riziotis, C., Huang, R., Zhang, C., Lü, J., & Yang, W. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800587 · Cited by 24
Zhang, P., Wang, T., Zhang, J., He, Y., Liu, H., & Zhang, S. (2023) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2023.114740 · Cited by 22
Alluri, N. R., Selvarajan, S., Chandrasekhar, A., Saravanakumar, B., Jeong, J. H., & Kim, S. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.06.134 · Cited by 22
Highly Reliable and Sensitive Tactile Transistor Memory
Chen, C., Lee, W., Shen, T., Wu, H., Shih, C., Ye, B., Lin, T., Chen, W., & Chen, Y. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600548 · Cited by 22
Body Compatible Thermometer Based on Green Electrolytes
Tao, X., Liao, S., Wang, S., Wu, D., & Wang, Y. (2018) · ACS Sensors · doi:10.1021/acssensors.8b00249 · Cited by 23
Farid, M. I., Wu, W., Li, G., Sun, Y., Zhang, Z., & Zhang, F. (2025) · Composite Structures · doi:10.1016/j.compstruct.2025.119046 · Cited by 22
Self-citationWirelessly controlled drug delivery systems for translational medicine
Wei, X., Wang, Y., Hu, H., Sheng, T., Yao, Y., Chen, C., Xu, G., Li, K., Su, Y., Nan, K., et al. (2025) · Nature Reviews Electrical Engineering · doi:10.1038/s44287-025-00151-z · Cited by 29
“With the advantages of continuous operation, long lifespan and excellent sustainability, thermoelectric generators are an ideal choice for powering wearable systems and the main method of harvesting thermal energy from the human body 129–131 .”
Yuan, X., Won, S. M., Han, M., Wang, Y., Rogers, J. A., Huang, Y. Y., & Wang, H. (2021) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2021.104400 · Cited by 21
“…the Mechanics and Physics of Solids 151 (2021) 104400 et al., 2018; Wu et al., 2018), shear force (Mu et al., 2018; Yang et al., 2018), vibration (Kang et al., 2014; Ha et al., 2019; Lee et al., 2019a) and temperature (Zhang et al., 2015a; Hong et al., 2016; Cui et al., 2019; Jeong et al., 2019).”
BackgroundInfluentialSezen-Edmonds, M., Yeh, Y., Yao, N., & Loo, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00817 · Cited by 25
Anionic variations for BaMg2X2 (X = N to Bi) compounds by density functional theory
Murtaza, G., Khan, A. A., Al‐Anazy, M. M., Laref, A., Mahmood, Q., Zada, Z., & Aman, M. (2021) · The European Physical Journal Plus · doi:10.1140/epjp/s13360-021-01143-2 · Cited by 21
Tran, V. V., Phung, V., & Lee, D. (2024) · Bio-Design and Manufacturing · doi:10.1007/s42242-024-00297-z · Cited by 24
“12e and 12f) [258].”
Ekubaru, Y., Sugahara, T., Ibano, K., Suetake, A., Tsurumoto, M., Kagami, N., & Suganuma, K. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901128 · Cited by 23
Li, W., Lin, C., Rasheed, A., Iranmanesh, E., Zhou, Q. H., & Wang, K. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.2995582 · Cited by 20
“Some other researchers attempted to use one material system to carry out both pressure and temperature sensing [28].”
BackgroundPorous pressure sensors from mechanisms to application: A review
Wen, L., Fan, W., Kang, J., & Huang, H. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.116461 · Cited by 19
Size Prediction and Electrical Performance of Knitted Strain Sensors
Liang, X., Cong, H., Dong, Z., & Jiang, G. (2022) · Polymers · doi:10.3390/polym14122354 · Cited by 19
Mesogenic polymer composites for temperature-programmable thermoelectric ionogels
Park, S., Kim, B., Cho, C., & Kim, E. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta03120e · Cited by 19
6.14 Organic Thermoelectric Composites Materials
Bilotti, E., Fenwick, O., Schroeder, B. C., Baxendale, M., Taroni, P. J., Degousée, T., & Liu, Z. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10024-4 · Cited by 24
Kim, K. K., Bang, J., Kim, M., Jeong, J., Ha, I., & Ko, S. H. (2025) · Nature Materials · doi:10.1038/s41563-025-02373-w · Cited by 28
Wearable self-powered devices based on polymer thermoelectric materials
Yang, Y., Li, H., Xu, Z., Luo, S., & Chen, L. (2025) · Moore and More · doi:10.1007/s44275-024-00020-1 · Cited by 18
“Zhang et al. [81] fabricated a temperature–pressure sensor based on microstructure-frame-supported OTE materials, and the temperature–pressure-coupled responses were quantitatively converted into a voltage signal and a current signal, respectively (see Fig.”
Sezen-Edmonds, M., Register, J. T., Yao, Y., Glišić, B., & Loo, Y. (2016) · Small · doi:10.1002/smll.201600858 · Cited by 19
Piezothermic Transduction of Functional Composite Materials
Zhao, S., Zhu, R., & Fu, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b18639 · Cited by 18
Wu, L., Ji, Y., Ouyang, B., Li, Z., & Yang, Y. F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010439 · Cited by 18
Highly sensitive and transparent flexible temperature sensor based on nematic liquid crystals
Wu, K., Sun, J., Gao, L., Xing, H., Cai, M., Zhao, T., Yang, C., Ye, W., & Kong, X. (2021) · Liquid Crystals · doi:10.1080/02678292.2021.1970834 · Cited by 18
Trained laser-patterned carbon as high-performance mechanical sensors
Hepp, M., Wang, H., Derr, K., Delacroix, S., Ronneberger, S., Loeffler, F. F., Butz, B., & Strauß, V. (2022) · npj Flexible Electronics · doi:10.1038/s41528-022-00136-0 · Cited by 19
Hu, R., Liu, P., Zhu, W., Guo, X., Liu, Z., Jin, Z., Yang, R., Han, J., Tian, H., Ma, Y., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202417205 · Cited by 22
Lee, E.-I., Ko, H.-J., Kim, J., & Park, J. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.110984 · Cited by 17
High-Performance Pressure Sensor for Monitoring Mechanical Vibration and Air Pressure
Meng, Y., Li, H., Wu, K., Zhang, S., & Li, L. (2018) · Polymers · doi:10.3390/polym10060587 · Cited by 17
Kim, J. H., Park, D., Moon, S., Park, C., Thiyagarajan, K., Choi, S., Hwang, H., & Jeong, U. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100688 · Cited by 17
Wen, N., Fan, Z., Yang, S., Guo, Y., Zhang, J., Lei, B., Zhao, Y., Cong, T., Li, C., Jing, Z., et al. (2022) · Advanced Electronic Materials · doi:10.1002/aelm.202200680 · Cited by 17
Li, X., Zhang, J., & Duan, H. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c19022 · Cited by 16
Wang, N., Sun, S., Lei, T., Xia, Z., Sha, Y., Shi, Q., & Yuan, F. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202521776 · Cited by 17
Zeng, H., Li, W., Wang, J., Yu, H., Xiong, T., He, J., Zheng, X., Song, Y., Li, S., Zhou, D., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-65815-8 · Cited by 16
“4d), which are consistent with those of many commercial and previously reported temperature sensors 11,26 .”
Mondal, A., Singh, H. H., & Khare, N. (2023) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-022-09415-y · Cited by 16
Mascia, A., Spanu, A., Bonfiglio, A., & Cosseddu, P. (2023) · Scientific Reports · doi:10.1038/s41598-023-43360-y · Cited by 17
“An interesting solution to this important requirement is represented by the work of Zhang et al. 22 , who reported about the development of flexible dual-parameter temperature–pressure sensors based on microstruc-ture-frame-supported organic thermoelectric (MFSOTE) materials.”
BackgroundA biomimetic e-whisker sensor with multimodal perception and stimuli discrimination
Chen, C., Li, X., Zhao, S., Song, Y., Zhu, Y., Wang, Q., Zhong, C., Chen, R., Li, E. Q., Li, Z., et al. (2023) · Device · doi:10.1016/j.device.2023.100148 · Cited by 16
Self-powered photoelectric sensors based on hydrogel diodes doped with photoacid
Wu, L., Qi, J., Zhang, L., Lei, Y., Gao, H., Gao, J. X., Ju, J., & Yao, X. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.151215 · Cited by 17
Cu- or Ag-containing Bi-Sb-Te for in-line roll-to-roll patterned thin-film thermoelectrics
Tao, X., Zheng, Q., Zeng, C., Potter, H., Zhang, Z., Ellingford, J., Bonilla, R. S., Bilotti, E., Grant, P. S., & Assender, H. E. (2025) · Nature Communications · doi:10.1038/s41467-024-55279-7 · Cited by 19
Jiang, F., Liu, C., & Xu, J. (2017) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/n972017-00231 · Cited by 16
Wang, Y., Zhang, X., Wang, W., Xing, X., Wu, S., Dong, Y., You, Y., Chen, R., Ren, Z., Guo, W., et al. (2020) · PubMed Central · Cited by 16
Hsu, S.-C., Hong, J.-Y., Chen, C., Chen, S., Zhen, J.-H., Hsieh, W., Chen, Y., & Chuang, T. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.148264 · Cited by 16
Ding, H., Lv, G., Shi, Z. H., Cheng, D., Xie, Y., Huang, Y., Yin, L., Yang, J. H., Wang, Y., & Sheng, X. (2020) · Nano Research · doi:10.1007/s12274-020-3254-2 · Cited by 16
Carbon fiber/thermoelectric Ag 2S core–shell structure-based temperature–pressure dual-mode sensors
Zhu, J., Wang, Y., Liu, H., Lou, S., Shu, M., Liu, M., Zong, P., & Wan, C. (2025) · Journal of Advanced Ceramics · doi:10.26599/jac.2025.9221073 · Cited by 15
Bang, J., Baek, K., Lim, J., Han, Y., & So, H. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202300186 · Cited by 15
Wu, J., Zhang, Y., & Zheng, X. T. (2024) · Sensors & Diagnostics · doi:10.1039/d4sd00019f · Cited by 16
Wearable Piezoelectric Sensors Based on BaTiO3 Films for Sarcopenia Recognition
Han, S., Zeng, Q., Ying, L., Xiao, Q., Chen, Y., Yan, F., Xiong, Y., Yue, J., & Tian, X. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202302172 · Cited by 16
An, Y., Chen, Y., Liu, J., Zhou, R., Wang, W., Li, Y., Xu, H., Wang, X., Wu, D., & Sun, J. (2024) · Journal of Polymer Research · doi:10.1007/s10965-024-03972-y · Cited by 15
Wang, Z., Jiang, S., Huang, Y., Song, T., Liufu, C., Huang, Y., Zhou, G., Zhang, Q., Qian, X., Lan, Y., et al. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400096 · Cited by 15
Touch Empowerment: Self‐Sustaining e‐Tattoo Thermoelectric System for Temperature Mapping
Almeida, M. A. S., Pires, A. L., Ramírez, J. L., Malik, S. B., de la Flor, S., Llobet, E., Pereira, A. T., & Pereira, A. M. (2024) · Advanced Science · doi:10.1002/advs.202403775 · Cited by 18
Zhu, S., Li, Q., Guo, Y., Zhang, J., Wang, A., Liu, D., & Nie, G. (2025) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2025.137330 · Cited by 16
Research progress of self-powered flexible biomedical sensors
Tan, P., Zhao, C., Fan, Y., & Li, Z. (2020) · Acta Physica Sinica · doi:10.7498/aps.69.20201012 · Cited by 16
An 18-g haptic feedback ring with a three-axis force-sensing skin
Kang, S., Mete, M., Gandla, S., Türkmen, D., John, R. K., Kalafat, M. A., Kim, S., & Paik, J. K. (2025) · Nature Electronics · doi:10.1038/s41928-025-01515-x · Cited by 27
“Functional conductive composite materials can be used to simultaneously detect multiple stimuli 39 .”
He, S., Du, C., Sheng, H., He, C., Liu, X., Jin, X., Chen, Q., & Tian, F. (2023) · Gels · doi:10.3390/gels9020162 · Cited by 14
“As shown in Figure 4b, the effect of temperature stimulation on the change of material resistance is negligible [37,38].”
BackgroundZhang, Z., Zhang, H., Zhang, Q., Zhao, X., Li, B., Zang, J., Zhao, X., & Zhang, T. (2023) · Micromachines · doi:10.3390/mi14030690 · Cited by 14
“Ideally, a pressure–temperature multifunctional sensor should have the ability to monitor these two external stimuli simultaneously [38,39].”
BackgroundRecent Advances in Flexible Multifunctional Sensors
Chang, Y., Qi, X., Wang, L., Li, C., & Wang, Y. (2023) · Micromachines · doi:10.3390/mi14112116 · Cited by 18
Recent advances in printed devices for next-generation sensing
Bappy, M. O., Song, K., & Zhang, Y. (2025) · APL Electronic Devices · doi:10.1063/5.0264012 · Cited by 17
Sezen-Edmonds, M., Khlyabich, P. P., & Loo, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00101 · Cited by 16
Wearable and Flexible Sensors Based on 2D and Nanomaterials
Samal, R., & Rout, C. S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102577-2.00012-9 · Cited by 14
Flexible thermoelectric materials and devices for sensing applications
Zhou, H., Zhang, X., Luo, Z., Wei, X. C., & Deng, H. (2025) · Materials Horizons · doi:10.1039/d5mh01214g · Cited by 15
Skin-Integrated Soft Wearable XR Interfaces for Seamless and Realistic User Experience
Pyun, K. R., Park, J. J., Ahn, J., Lee, Y. S., Kim, H., Kim, J., Yoon, S., Ha, K.-H., Seo, D., Rogers, J. A., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00966 · Cited by 13
Zhao, J., Dai, S., Wang, X., Wang, Y., Chen, Y., Wu, G., Chang, S., Zhao, Z., Liu, Z., Zhang, H. L., et al. (2026) · Advanced Materials Technologies · doi:10.1002/admt.202502194 · Cited by 13
Wearable Thermoelectric Generators: Materials, Structures, Fabrications, and Applications
Liu, J., Liu, Q., Lin, S., Leung, M. Y., Ma, Y., & Tao, X. (2023) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202200502 · Cited by 16
Flexible thermoelectrics: From energy harvesting to human–machine interaction
Wang, Y., Lu, Y. M., Zheng, Y., Wang, D., & Deng, Y. (2023) · Journal of Applied Physics · doi:10.1063/5.0135663 · Cited by 14
Undelaminated multilayer MXenes for block thermoelectric generators
Du, Z., Deng, K., Wang, F., Liu, X., Jiang, B., Zhao, T., Xie, W., Xiao, X. R., & Ding, T. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta01940g · Cited by 13
Integrated Charge Transfer in Organic Ferroelectrics for Flexible Multisensing Materials
Xu, B., & Ren, S. (2016) · Small · doi:10.1002/smll.201600980 · Cited by 13
Multifunctional Sensors Based on a Silver Nanowires/PDMS Aerogel Composite
Li, Y., & Han, W. (2022) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.2c01084 · Cited by 13
Thermoelectric and stress distributions around a smooth cavity in thermoelectric material
Lee, Z., Tang, Y., & Zou, W. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107198 · Cited by 12
Robust and Flexible Sliding Tactile Sensor for Surface Pattern Perception and Recognition
Zhu, Z., Xu, Y., Lin, W., Hu, Z., Lin, Z., Sun, Z., Peng, Z., & Wang, Z. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202300225 · Cited by 12
Murata, M., Hirai, T., Seki, T., & Uchida, K. (2024) · Applied Physics Letters · doi:10.1063/5.0202818 · Cited by 12
Qi, X., Wang, L., Li, C., & Wang, Y. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c12062 · Cited by 13
Ionic Thermoelectric‐Powered Resistive Sensors
Liao, M., Ma, H., Zhu, N., Jonsson, M. P., & Zhao, D. (2024) · Advanced Science · doi:10.1002/advs.202413093 · Cited by 12
Bai, Q., Liu, X., Shi, X., Wang, Z., Wu, Z., Dong, Q., Liu, N., Liu, T., & Liu, S. (2024) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.4c01923 · Cited by 12
Metal coordination assists fabrication of multifunctional aerogel
Hu, Y., Zhuo, H., Chen, Z., Peng, X., Zhong, L., & Sun, R. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.09.007 · Cited by 12
Piezoresistive flexible pressure sensor using vuggy clays as templates
Du, D., Ma, X., Zhao, L., An, W., & Yu, S. (2022) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-022-08122-y · Cited by 12
“Wearable electronics have received considerable attention in various applications, such as human motion detection [1, 2], healthcare monitoring [3], electronic skin (e-skin) [4–6], soft robotic and human– machine interface [7–9].”
BackgroundEvolution of Musculoskeletal Electronics
Li, J., Zhang, F., Lyu, H., Yin, P., Shi, L., Li, Z., Zhang, L., Di, C., & Tang, P. (2024) · Advanced Materials · doi:10.1002/adma.202303311 · Cited by 16
Self-citationEmerging Thermoelectric Generators Based on Printed and Flexible Electronics Technology
Molina‐Lopez, F. (2020) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/sensors47125.2020.9278922 · Cited by 13
“PEDOT:PSS-based TEGs have been also patterned by simple stamping on porous frames [5].”
BackgroundInfluentialReview of flexible multimode sensing techniques and their decoupling principles for smart fisheries
Huang, W., Xia, J., Glamuzina, B., & Zhang, X. (2024) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2024.108758 · Cited by 12
Yu, X. Y., Ji, Y., Shen, X., & Le, X. (2024) · Sensors · doi:10.3390/s24092773 · Cited by 12
“…a variety of materials have been explored for realizing multifunctional sensing, including spin-rich van der Waals semiconductor films [16], organic thermoelectric composite materials [17], organic–inorganic hybrid sponges [18,19], thermogalvanic hydrogels [20], and ferroelectric materials [21,22].”
BackgroundUnlocking the potential of transdermal drug delivery
Li, S., Wu, J., Peng, X., & Feng, X. (2024) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2024.2366210 · Cited by 15
Shape and size effects on electronic thermodynamics in nanoscopic quantum dots
Gil-Corrales, J. A., Dagua-Conda, C. A., Mora-Ramos, M. E., Morales, A. L., & Duque, C. A. (2025) · Physica E Low-dimensional Systems and Nanostructures · doi:10.1016/j.physe.2025.116228 · Cited by 11
Gao, T., Ji, Y., & Yang, Y. F. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000176 · Cited by 11
Ge, C., Duan, Z., Li, R., Chen, H., Li, T., Hu, P., Wang, Z., Zhao, J., & Zhang, J. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113676 · Cited by 11
Kim, S., Montero, J., Choi, Y. J., Yoon, J., Choi, Y., Song, P. K., & Österlund, L. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107757 · Cited by 11
Electrical conductivity transformation mechanism of GNP s/ CB / SR nanocomposite foams
Liu, C., Wu, C., Hao, C., Liu, P., Guo, X., Zhang, Y., & Huang, Y. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45996 · Cited by 11
Directly transfer-printing tailored micro-supercapacitors
Lü, Y., Li, L., Wang, X., & Chen, D. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102342 · Cited by 11
Contribution of Sub-Gap States to Broadband Infrared Response in Organic Bulk Heterojunctions
Li, N., Park, I., Vella, J. H., Oh, S. J., Azoulay, J. D., Leem, D., & Ng, T. N. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c17477 · Cited by 11
Recent Advances of PEDOT in Flexible Energy Conversion and Storage Devices
Gong, C., Cheng, S., Meng, X., Hu, X., & Chen, Y. (2021) · 化学学报 · doi:10.6023/a21030106 · Cited by 11
A Force-Thermal-Magnetic Trimodal Flexible Sensor for Ultrafine Recognition of Metallic Materials
Peng, L., Xu, J., Yuan, S., Li, S., Deng, S., Zhu, H., Fu, L., Zhang, T., & Li, T. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c17296 · Cited by 10
Ye, X., Zhang, R., Zhao, Y., Wen, S., Li, T., Zhang, Z., Qiu, H., & Ji, S. (2025) · Materials Today · doi:10.1016/j.mattod.2025.08.009 · Cited by 10
Wei, N., Li, Y., Zhu, C., & Tang, Y. (2022) · Nanomaterials · doi:10.3390/nano12152574 · Cited by 10
“adopted polyurethane foam to fabricate a dual-model sensor for both pressure and temperature [12].”
MethodAdvances in Organic Thermoelectric Devices for Multiple Applications
Ma, Y., Di, C., & Zhu, D. (2023) · Advanced Physics Research · doi:10.1002/apxr.202300027 · Cited by 10
Self-citationApplication of Stone-Derived Substrates in Thin-Film Temperature Sensing
Khaanghah, N. S., Oliveira, H. D. S., Krik, S., Carrasco‐Pena, A., Cantarella, G., Haller, M., Rapagnani, N., van Bezooijen, A., Nippa, M., & Munzenrieder, N. S. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3393113 · Cited by 11
“While multifunctional sensors can bring cross-sensitivity to detect different parameters and reduce the number of individual sensors [10], [11], the use of biocompatible and biodegradable materials in sensor fabrication can be a practical approach.”
Chang, K., Li, M., Zhong, W., Wu, Y., Luo, M., Chen, Y., Liu, Q., Liu, K., Wang, Y., Lu, Z., et al. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47928 · Cited by 10
Jiang, S., Wang, Z., Li, S., Huang, Y., Lan, Y., & Li, G. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202401891 · Cited by 10
Recent Trends in Conjugated Polymer‐Based Thermoelectrics From Materials to Device
Kim, D., Kim, H., Seo, J., Jeon, I., Lee, H., & Kang, B. (2025) · EcoMat · doi:10.1002/eom2.70029 · Cited by 9
Non-hazardous and fully recyclable ionic thermoelectrics for sustainable human–machine interfaces
Yang, J., Wang, Z., Yang, Z., Liu, M., Lee, D. K. H., Bian, K., Ouyang, J., & Tee, B. C. K. (2025) · Nature Communications · doi:10.1038/s41467-025-65377-9 · Cited by 17
“Among these, TE materials offer a distinct advantage by directly converting thermal gradients into electrical signals without power consumption 9 – 14 .”
Metadata
- Authors
- Zhang, F., Zang, Y., Huang, D., Di, C.-A., & Zhu, D.
- Affiliations
- Chinese Academy of Sciences (CN)
- Corresponding author
- Di, Chong-an
- Zhu, Daoben
- Venue
- Nature Communications
- Published
- 2015-09-21
- Volume
- 6
- Issue
- 1
- Pages
- 8356-8356
- ISSN
- 2041-1723 (ISSN-L)
- PMC
- PMC4595753
- OpenAlex
- W2147820879
- Cited by
- 668
- References
- 42
- Citations by year
- 2026: 44 · 2025: 78 · 2024: 74 · 2023: 75 · 2022: 75 · 2021: 82 · 2020: 63 · 2019: 69 · 2018: 45 · 2017: 44 · 2016: 19
- FWCI
- 17.91
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Nature Communications (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- Chinese Academy of Sciences (XDB12010000)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- organic thermoelectrics, flexible sensors, self-powered sensors, electronic skin, pressure sensing, health monitoring, wearable electronics
- MeSH terms
- Biocompatible Materials, Equipment Design, Pressure, Skin, Temperature, Transistors, Electronic, Skin, Artificial
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.