Programming curvature using origami tessellations
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Origami describes rules for creating folded structures from patterns on a flat sheet, but does not prescribe how patterns can be designed to fit target shapes. Here, starting from the simplest periodic origami pattern that yields one-degree-of-freedom collapsible structures-we show that scale-independent elementary geometric constructions and constrained optimization algorithms can be used to determine spatially modulated patterns that yield approximations to given surfaces of constant or varying curvature. Paper models confirm the feasibility of our calculations. We also assess the difficulty of realizing these geometric structures by quantifying the energetic barrier that separates the metastable flat and folded states. Moreover, we characterize the trade-off between the accuracy to which the pattern conforms to the target surface, and the effort associated with creating finer folds. Our approach enables the tailoring of origami patterns to drape complex surfaces independent of absolute scale, as well as the quantification of the energetic and material cost of doing so.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“since vertices with three or fewer edges are completely rigid while vertices with more than four edges are too soft (that is, have multiple continuous degrees of freedom).”
From Self-folding origami at any energy scale (2017) · cites this paper as [11]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bowden, N., Brittain, S., Evans, A. G., Hutchinson, J. W., & Whitesides, G. M. (1998) · Nature · doi:10.1038/30193 · Cited by 2,305 · cited 1×
“It also occurs in many natural settings, including insect wings and leaves ( 4, 5 ), vertebrate guts ( 6 ) and is the result of the spontaneous wrinkling of soft adherent thin elastic films ( 7–9 ).”
BackgroundUsing origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Geometry of Miura-folded metamaterials
Schenk, M., & Guest, S. D. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1217998110 · Cited by 1,009
Blees, M. K., Barnard, A. W., Rose, P. A., Roberts, S. P., McGill, K. L., Huang, P. Y., Ruyack, A. R., Kevek, J. W., Kobrin, B., Muller, D. A., et al. (2015) · Nature · doi:10.1038/nature14588 · Cited by 891 · cited 1×
“1b), and previous origami ( 17–19 ) and kirigami ( 20–22 ) surface approximations, to pose the inverse problem of fitting Miura-like origami tessellations to surfaces with intrinsic curvature.”
BackgroundChen, Y., Peng, R., & You, Z. (2015) · Science · doi:10.1126/science.aab2870 · Cited by 563 · cited 1×
“llations that conform to prescribed surfaces. For generalized cylinders, we have shown that the constructed pattern is rigid-foldable and flat-foldable, and thus can be easily adapted to thick origami (25). For doubly-curved surfaces, our computational tool allows us to calculate physically realizable tessellations whi…”
MethodVillification: How the Gut Gets Its Villi
Shyer, A. E., Tallinen, T., Nerurkar, N. L., Wei, Z., Gil, E. S., Kaplan, D. L., Tabin, C. J., & Mahadevan, L. (2013) · Science · doi:10.1126/science.1238842 · Cited by 562
Self-citationOrigami structures with a critical transition to bistability arising from hidden degrees of freedom
Silverberg, J. L., Na, J.-H., Evans, A. A., Liu, B., Hull, T. C., Santangelo, C. D., Lang, R. J., Hayward, R. C., & Cohen, I. (2015) · Nature Materials · doi:10.1038/nmat4232 · Cited by 492
Geometric Folding Algorithms: Linkages, Origami, Polyhedra
Demaine, E. D., & O’Rourke, J. (2007) · Cited by 409
Geometric Mechanics of Periodic Pleated Origami
Wei, Z. Y., Guo, Z. V., Dudte, L., Liang, H. Y., & Mahadevan, L. (2013) · Physical Review Letters · doi:10.1103/physrevlett.110.215501 · Cited by 409 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
BackgroundSelf-citationOrigami Multistability: From Single Vertices to Metasheets
Waitukaitis, S., Menaut, R., Chen, B. G.-G., & van Hecke, M. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.055503 · Cited by 326 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
Background
Research works printed but not linked: 2
- Tachi, T. Hangai prize papers for 2009: generalization of rigid-foldable quadrilateral-mesh origami. J. IASS 50, 173–179 (2009).
- Kawasaki, T. Proc. 1st Int. Meeting Origami Sci. Technol. (ed. Huzita, H.) 229–237 (1989).
Cited by
Items 201–300 of 481
Response of Graded Miura-Ori Metamaterials to Quasi-Static and Dynamic In-Plane Compression
Karagiozova, D., Zhang, J., Chen, P., Lu, G., & You, Z. (2022) · Journal of Aerospace Engineering · doi:10.1061/(asce)as.1943-5525.0001416 · Cited by 24
Microelectronic Morphogenesis: Smart Materials with Electronics Assembling into Artificial Organisms
McCaskill, J. S., Karnaushenko, D., Zhu, M., & Schmidt, O. G. (2023) · Advanced Materials · doi:10.1002/adma.202306344 · Cited by 26
Acoustic Wave Guiding by Reconfigurable Tessellated Arrays
Zou, C., Lynd, D. T., & Harne, R. L. (2018) · Physical Review Applied · doi:10.1103/physrevapplied.9.014009 · Cited by 24
Theory and practice of origami in science
Santangelo, C. D. (2019) · Soft Matter · doi:10.1039/c9sm01745c · Cited by 24
Reprogrammable curved-straight origami: Multimorphability and volumetric tunability
Mirzajanzadeh, M., & Pasini, D. (2025) · Science Advances · doi:10.1126/sciadv.adu4678 · Cited by 23
Dikici, Y., Jiang, H. L., Li, B., Daltorio, K. A., & Akkuş, O. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202101620 · Cited by 27
Advanced structural modeling of a fold in Origami/Kirigami inspired structures
Soleimani, H., Goudarzi, T., & Aghdam, M. M. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107406 · Cited by 26
A novel scheme of folding discretized surfaces of revolution inspired by waterbomb origami
Tang, J., Tian, M., Wang, C., Wang, X., & Mao, H. (2021) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2021.104431 · Cited by 23
Surface matching design of carbon fiber composite honeycomb
Wei, X., Jiao, Y., Wang, Y., Yan, C., Han, J., & Xiong, J. (2024) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2024.105890 · Cited by 22
Rapid multi-physics simulation for electro-thermal origami systems
Yi, Z., & Filipov, E. T. (2021) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2021.106537 · Cited by 27
“Over the past decades, there have been a number of research efforts to optimize origami designs [61].”
BackgroundPhase diagram and mechanics of snap-folding of ring origami by twisting
Sun, X., Wu, S., Dai, J., Leanza, S., Yue, L., Yu, L., Jin, Y., Qi, H. J., & Zhao, R. R. (2022) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2022.111685 · Cited by 22
“, 2021), reconfigurable surfaces (Dudte et al., 2016; Callens and Zadpoor, 2018), robotic arms (Martinez et al.”
BackgroundIntegration of origami and deployable concept in volumetric modular units
Beatini, V., Gatheeshgar, P., Rajanayagam, H., Poologanathan, K., Suntharalingam, T., Perera, D., Kanthasamy, E., & Nagaratnam, B. (2022) · Scientific Reports · doi:10.1038/s41598-022-18951-w · Cited by 22
Bending performance of an inflation-powered bistable folding beam
Zhao, L., & Sun, B. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2023.117207 · Cited by 22
Origamic metal-organic framework toward mechanical metamaterial
Jin, E., Lee, I. S., Yang, D. C., Moon, D., Nam, J., Cho, H., Kang, E., Lee, J., Noh, H., Min, S. K., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-43647-8 · Cited by 22
“The length scales used for origami have also evolved, ranging from the meter to the nanoscale 16 – 20 .”
On the Incompressibility of Cylindrical Origami Patterns
Bös, F., Wardetzky, M., Vouga, E., & Gottesman, O. (2016) · Journal of Mechanical Design · doi:10.1115/1.4034970 · Cited by 22
Self-citationLearning to self-fold at a bifurcation
Arinze, C., Stern, M., Nagel, S. R., & Murugan, A. (2023) · Physical review. E · doi:10.1103/physreve.107.025001 · Cited by 27
“[39] Levi H Dudte, Etienne Vouga, Tomohiro Tachi, and Lakshminarayanan Mahadevan.”
BackgroundGradient Origami Metamaterials for Programming Out‐of‐Plane Curvatures
Hedayati, R., Roudbarian, N., Tahmasiyan, S., & Bodaghi, M. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202201838 · Cited by 21
Programming bistability in geometrically perturbed mechanical metamaterials
Peng, Y., Niloy, I., Kam, M., Celli, P., & Plucinsky, P. (2024) · Physical Review Applied · doi:10.1103/physrevapplied.22.014073 · Cited by 24
Foldable cones as a framework for nonrigid origami
Andrade-Silva, I., Adda-Bedia, M., & Dias, M. A. (2019) · Physical review. E · doi:10.1103/physreve.100.033003 · Cited by 23
Response evolution of mechanical metamaterials under architectural transformations
Meeussen, A. S., Oğuz, E. C., van Hecke, M., & Shokef, Y. (2020) · New Journal of Physics · doi:10.1088/1367-2630/ab69b5 · Cited by 22
“[5] Dudte, L.”
Design and motion analysis of axisymmetric 3D origami with generic six-crease bases
Zhao, Y. F., Kanamori, Y., & Mitani, J. (2017) · Computer Aided Geometric Design · doi:10.1016/j.cagd.2017.10.002 · Cited by 21
A review of curved crease origami: design, analysis, and applications
Song, K., Li, H., Li, Y., Ma, J., & Zhou, X. (2024) · Frontiers in Physics · doi:10.3389/fphy.2024.1393435 · Cited by 21
Jiang, C., Rist, F., Pottmann, H., & Wallner, J. (2020) · ACM Transactions on Graphics · doi:10.1145/3414685.3417844 · Cited by 20
“For the folding-only case, which is not the subject of the present paper, we only mention a few examples: Miura-ori type patterns on flat sheets and their generalizations can be folded to assume certain curved forms [Dudte et al. 2016; Tachi 2009].”
McMahan, C., Akerson, A., Celli, P., Audoly, B., & Daraio, C. (2022) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2022.104934 · Cited by 23
Cosma, M. P., & Brighenti, R. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101842 · Cited by 24
Heat set creases in polyethylene terephthalate (PET) sheets to enable origami-based applications
Sargent, B. S., Brown, N. C., Jensen, B. D., Magleby, S. P., Pitt, W. G., & Howell, L. L. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab49df · Cited by 22
The MoSeS dynamic omnigami paradigm for smart shape and composition programmable 2D materials
Berry, J. M., Ristić, S., Zhou, S., Park, J., & Srolovitz, D. J. (2019) · Nature Communications · doi:10.1038/s41467-019-12945-5 · Cited by 20
Shape and topology morphing of closed surfaces integrating origami and kirigami
Dang, X., Chen, S., Acha, A. E., Wu, L., & Pasini, D. (2025) · Science Advances · doi:10.1126/sciadv.ads5659 · Cited by 19
“On the other hand, origami is favored in cases where the precise control is required over the entire shape transformation ( 27 ), whereas kirigami has to seek a trade-off between flexibility and controllability ( 28 ).”
Tunable origami metamaterial with arbitrary single-curvature configuration
Deng, X., Zhao, J., Cai, J., & Liu, X. (2022) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2022.104745 · Cited by 19
Li, L., Yao, H., & Mi, S. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c19679 · Cited by 20
A Review of Kirigami/Origami Metasurfaces for Controlling Electromagnetic Waves
Zheng, Y., Chen, K., & Feng, Y. (2024) · Annalen der Physik · doi:10.1002/andp.202400213 · Cited by 20
Meloni, M., Zhang, Q., Pak, J., Bilore, M. N., Ma, R., Ballegaard, E., Lee, D. S., & Cai, J. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104482 · Cited by 20
Sandwich Miura‐Ori Enabled Large Area, Super Resolution Tactile Skin for Human–Machine Interactions
Xu, Q., Yang, Z., Wang, Z., Wang, R., Zhang, B., Cheung, Y., Jiao, R., Shi, F., Hong, W., & Yu, H. (2025) · Advanced Science · doi:10.1002/advs.202414580 · Cited by 18
Topology and Morphology Design of Spherically Reconfigurable Homogeneous Modular Soft Robots
Freeman, C., Maynard, M. C., & Vikas, V. (2022) · Soft Robotics · doi:10.1089/soro.2021.0125 · Cited by 18
C-Shells: Deployable Gridshells with Curved Beams
Becker, Q., Suzuki, S., Ren, Y. J., Pellis, D., Panetta, J., & Pauly, M. V. (2023) · ACM Transactions on Graphics · doi:10.1145/3618366 · Cited by 18
An, S., Li, X., Guo, Z., Huang, Y., Zhang, Y., & Jiang, H. (2024) · Nature Communications · doi:10.1038/s41467-024-51865-x · Cited by 26
Ma, Z., Song, K., Ju, J., Wang, Y., Jia, H., & Zhou, X. (2025) · Composite Structures · doi:10.1016/j.compstruct.2025.119182 · Cited by 18
4D Origami by Smart Embroidery
Stoychev, G. V., Razavi, M. J., Wang, X., & Ionov, L. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700213 · Cited by 20
Actuation performance of fluidic origami cellular structure: a holistic investigation
Sane, H., Bhovad, P., & Li, S. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aadfac · Cited by 19
Rigidity percolation and geometric information in floppy origami
Chen, S., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1820505116 · Cited by 22
Self-citationComputational design methods for cylindrical and axisymmetric waterbomb tessellations
Zhao, Y. F., Li, S., Zhang, M., Zeng, L., Yang, Y., Kanamori, Y., & Mitani, J. (2021) · Computer Aided Geometric Design · doi:10.1016/j.cagd.2021.102037 · Cited by 18
Origami lattices and folding-induced lattice transformations
Fang, H., Li, S., Thota, M., & Wang, K. W. (2019) · Physical Review Research · doi:10.1103/physrevresearch.1.023010 · Cited by 18
Keeping It Together: Interleaved Kirigami Extension Assembly
Wang, X., Guest, S. D., & Kamien, R. D. (2020) · Physical Review X · doi:10.1103/physrevx.10.011013 · Cited by 18
“[12] L.”
BackgroundOrigami-Inspired Frequency Selective Surface with Fixed Frequency Response under Folding
Sessions, D., Cook, A. B., Fuchi, K., Gillman, A. S., Huff, G. H., & Buskohl, P. R. (2019) · Sensors · doi:10.3390/s19214808 · Cited by 18
“This includes bridging EM elements over fold lines [3] to mitigate challenges with folding and flexibility of metallic components and using shape memory alloys [11] and polymers [12,13] for fold actuation.”
MethodHarnessing interpretable machine learning for holistic inverse design of origami
Yi, Z., & Filipov, E. T. (2022) · Scientific Reports · doi:10.1038/s41598-022-23875-6 · Cited by 23
“Usually, the shape fitting problem can be constructed as an optimization problem, where the error between the target geometry and the origami is minimized given certain constraints [14, 15].”
BackgroundMethodInfluentialMeloni, M., Ballegaard, E., Zhang, Q., Zhang, J., Ma, R., & Cai, J. (2023) · Journal of Structural Engineering · doi:10.1061/jsendh.steng-11580 · Cited by 18
Müller, C. C., & ElZomor, M. (2024) · Sustainability · doi:10.3390/su16083415 · Cited by 20
Derivation of an Effective Plate Theory for Parallelogram Origami from Bar and Hinge Elasticity
Xu, H., Tobasco, I., & Plucinsky, P. (2023) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2024.105832 · Cited by 17
Magnetic Poles Enabled Kirigami Meta‐Structure for High‐Efficiency Mechanical Memory Storage
Xin, L., Li, Y., Wang, B., & Li, Z. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202310969 · Cited by 18
Origami Housing: An Innovative and Resilient Postdisaster Temporary Emergency Housing Solution
Müller, C. C., & ElZomor, M. (2024) · Journal of Architectural Engineering · doi:10.1061/jaeied.aeeng-1809 · Cited by 17
Shah, S. I. H., & Lim, S. (2019) · Scientific Reports · doi:10.1038/s41598-019-50893-8 · Cited by 18
Negative Poisson's ratio in non‐porous smooth curve sheet
Tan, H., Yu, L., & Zhou, Z. (2017) · physica status solidi (b) · doi:10.1002/pssb.201600612 · Cited by 16
The Complexity of Folding Self-Folding Origami
Stern, M., Pinson, M. B., & Murugan, A. (2017) · Physical Review X · doi:10.1103/physrevx.7.041070 · Cited by 34
“[10] Levi H Dudte, Etienne Vouga, Tomohiro Tachi, and”
BackgroundPop-up kirigami for stiff, dome-like structures
Redoutey, M., Roy, A., & Filipov, E. T. (2021) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2021.111140 · Cited by 19
Kirigami tiled surfaces with multiple configurations
Dorn, C. J., Lang, R. J., & Pellegrino, S. (2022) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2022.0405 · Cited by 15
“One means of achieving surfaces with specified curvature is by generalizing patterns such as the Miura-ori [4] [5] and Resch’s patterns [6].”
MethodComputing Quasi-Conformal Folds
Qiu, D., Lam, K.-C., & Lui, L. M. (2019) · SIAM Journal on Imaging Sciences · doi:10.1137/18m1220042 · Cited by 20
Programmable constitutive mode-coupling in tubular origami metamaterials
Sharma, A., Naskar, S., & Mukhopadhyay, T. (2025) · npj Metamaterials · doi:10.1038/s44455-025-00004-7 · Cited by 14
Crushing features of the triangular unit origami structure foldcore
Zhao, L., & Sun, B. (2023) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2023.2262179 · Cited by 14
Mailen, R. W., Dickey, M. D., Genzer, J., & Zikry, M. A. (2017) · Journal of Applied Physics · doi:10.1063/1.5000040 · Cited by 15
Geometry, analysis, and morphogenesis: Problems and prospects
Lewicka, M., & Mahadevan, L. (2022) · Bulletin of the American Mathematical Society · doi:10.1090/bull/1765 · Cited by 14
Self-citation4D Printing of Continuous Shape Representation
Ahn, S., Byun, J., Joo, H., Jeong, J., Lee, D., & Cho, K. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100133 · Cited by 17
Hexagonal Ring Origami Assemblies: Foldable Functional Structures With Extreme Packing
Leanza, S., Wu, S., Dai, J., & Zhao, R. R. (2022) · Journal of Applied Mechanics · doi:10.1115/1.4054693 · Cited by 14
“posed of repeated components or tessellations (gapless covering of a surface with repetitive patterns), which have involved origami-based structures [3,13,19] and metamaterials [20–22].”
BackgroundHayakawa, K., & Ohsaki, M. (2020) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2020.12.007 · Cited by 14
The Design Space of Kirchhoff Rods
Hafner, C., & Bickel, B. (2023) · ACM Transactions on Graphics · doi:10.1145/3606033 · Cited by 13
Fabric soft pneumatic actuators with programmable turing pattern textures
Tanaka, M., Song, Y., & Nomura, T. (2024) · Scientific Reports · doi:10.1038/s41598-024-69450-z · Cited by 16
Snapping Facades: Exploring Elastic Instability for the Building Envelope
Song, J. Y., Heo, S., & Shim, J. (2018) · Technology|Architecture + Design · doi:10.1080/24751448.2018.1420964 · Cited by 13
Digital Three-dimensional Smocking Design
Ren, J., Segall, A., & Sorkine‐Hornung, O. (2023) · ACM Transactions on Graphics · doi:10.1145/3631945 · Cited by 13
“Recent examples in this space include origami [Dudte et al. 2016], kirigami [Castle et al. 2014, 2016; Jiang et al. 2020], knittable meshes [Wu et al. 2019], 3D weaving [Ren et al. 2021], and quilting [Carlson et al. 2015; Igarashi and Mitani 2015; Leake et al. 2021], among many others.”
Compliant morphing structures from twisted bulk metallic glass ribbons
Celli, P., Lamaro, A., McMahan, C., Bordeenithikasem, P., Hofmann, D. C., & Daraio, C. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.104129 · Cited by 13
DNA-inspired frequency reconfigurable origami antenna using segmented rotation technique
Shah, S. I. H., & Lim, S. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/abc36d · Cited by 13
Shape optimization of non-rigid origami leading to emerging bistability
Wang, Y., & Liu, K. (2023) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2023.104165 · Cited by 12
“Based on the generalized Miura-ori, Dudte et al. propose an algorithm that enables the fitting of origami patterns onto arbitrary curved surfaces [39].”
MethodInverse design of multishape metamaterials
Dykstra, D., & Coulais, C. (2024) · Physical Review Applied · doi:10.1103/physrevapplied.22.064013 · Cited by 12
“On the other hand, mechanism-based inverse analysis methods often assume unit cells with a single degree of freedom, such as four-bar linkages in 2D [4, 5, 19] and 3D [10, 19] or origami patterns with quadrilateral faces [8, 9, 20].”
Dynamics of flexible multi-stable origami with bio-inspired creases
Han, H., Yu, B., Tang, L., Zhao, N., Cao, D., & Wang, Y. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.110488 · Cited by 12
Design and Fabrication of Elastic Geodesic Grid Structures
Pillwein, S., Kübert, J., Rist, F., & Musialski, P. (2020) · ACM Symposium on Computational Fabrication (SCF) · doi:10.1145/3424630.3425412 · Cited by 12
“One more way to easily construct spatial shapes from flat sheets is by appropriately folding paper [Massarwi et al. 2007; Mitani and Suzuki 2004], which is inherently related to the Japanese art of Origami [Dudte et al. 2016].”
MethodTotimorphic assemblies from neutrally stable units
Chaudhary, G., Prasath, S. G., Soucy, E. R., & Mahadevan, L. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2107003118 · Cited by 12
Self-citationTakva, Ç., & İlerisoy, Z. Y. (2023) · Sadhana · doi:10.1007/s12046-023-02185-1 · Cited by 12
Excess floppy modes and multibranched mechanisms in metamaterials with symmetries
Lubbers, L. A., & van Hecke, M. (2019) · Physical review. E · doi:10.1103/physreve.100.021001 · Cited by 14
Embedded Actuation for Shape-Adaptive Origami
Grey, S., Scarpa, F. L., & Schenk, M. (2021) · Journal of Mechanical Design · doi:10.1115/1.4049880 · Cited by 14
Wickeler, A. L., Sajid, A. S. M., & Naguib, H. E. (2022) · Thin-Walled Structures · doi:10.1016/j.tws.2022.108993 · Cited by 12
Design of Soft Origami Mechanisms with Targeted Symmetries
Gillman, A. S., Wilson, G., Fuchi, K., Hartl, D. J., Pankonien, A. M., & Buskohl, P. R. (2018) · Actuators · doi:10.3390/act8010003 · Cited by 14
“In addition, the waterbomb [30,36] and hypar [37,38] fold patterns also exhibit bistable behavior.”
BackgroundA review of Kresling origami: Smart design, mechanics, and applications
Ji, Z., Chen, J., Zhang, X., Liu, S., & Wang, C. (2025) · Engineering Structures · doi:10.1016/j.engstruct.2025.121499 · Cited by 11
Recent Progress in Shape-Transformable Materials and Their Applications
Lee, Y., Kim, J., Lien, J., Lee, Y.-J., & Choi, I. (2021) · Electronic Materials Letters · doi:10.1007/s13391-021-00330-8 · Cited by 13
Zhang, L., Zhang, Z., Weisbecker, H., Yin, H., Liu, Y., Han, T., Guo, Z., Berry, M., Yang, B., Guo, X. M., et al. (2022) · Science Advances · doi:10.1126/sciadv.ade0838 · Cited by 12
Consistently fitting orthopedic casts
Rao, C., Tian, L., Dong-ming Yan, A., Liao, S., Deußen, O., & Lü, L. (2019) · Computer Aided Geometric Design · doi:10.1016/j.cagd.2019.04.018 · Cited by 11
“Deployable structures have received much attention and been widely utilized in storage or transport thanks to the capabilities of transition between two or more geometric configurations, like Chebyshev nets Garg et al. (2014), origami patterns Dudte et al. (2016), and scissor structures.”
BackgroundMethodInfluentialMaterials, Structures, and Strategies for Foldable Electroluminescent Devices
Chen, Z., Yin, D., & Feng, J. (2023) · Advanced Optical Materials · doi:10.1002/adom.202300282 · Cited by 11
MERCI: Mixed Curvature-Based Elements for Computing Equilibria of Thin Elastic Ribbons
Charrondière, R., Neukirch, S., & Bertails‐Descoubes, F. (2024) · ACM Transactions on Graphics · doi:10.1145/3674502 · Cited by 10
Unflat-foldable Square-Twist origami composite structure with bistable load-bearing capability
Wang, L., Chen, Z., Song, W., & Zhao, Z. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.109936 · Cited by 10
Conforming nanoparticle sheets to surfaces with Gaussian curvature
Mitchell, N., Carey, R. L., Hannah, J., Wang, Y., Ruiz, M. F. C., McBride, S. P., Lin, X., & Jaeger, H. M. (2018) · Soft Matter · doi:10.1039/c8sm01640b · Cited by 10
Lu, W., Chen, W., & Lü, W. (2020) · Polymer Composites · doi:10.1002/pc.25635 · Cited by 10
Reconfigurable Acoustic Arrays With Deployable Structure Based on a Hoberman–Miura System Synthesis
Zhao, N., & Harne, R. L. (2020) · Journal of Mechanical Design · doi:10.1115/1.4048745 · Cited by 10
“Figure 2(a) shows the geometry of a regular Miura-ori unit cell that may be repeated in x- and y-axes or altered to achieve broad curvature [43,44].”
BackgroundLi, Y., Avis, S. J., Zhang, T., Kusumaatmaja, H., & Wang, X. S. (2021) · Materials Horizons · doi:10.1039/d1mh01152a · Cited by 10
Constructing foldable cylindrical surfaces via unfolded waterbomb origami units
Zhao, Y. F., Wei, Y., Jia, Y., Li, S., Zhang, M., Zeng, L., Yang, Y., & Mitani, J. (2022) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwac062 · Cited by 11
Tao, J., Tang, P., He, S., Yang, H., Li, Y., Jing, L., Gao, F., Song, J., Chen, H., & Wang, Z. (2023) · Advanced Optical Materials · doi:10.1002/adom.202300841 · Cited by 10
Inverse Origami Design Model for Soft Robotic Development
Hu, Q., Li, J., Tao, J., Dong, E., & Sun, D. B. (2023) · Soft Robotics · doi:10.1089/soro.2022.0197 · Cited by 10
Recent Progress in Strain-Engineered Stretchable Constructs
Hanif, A., Yoo, D., Kim, D., Mustafayev, F., Hajiyev, S., & Kim, D. S. (2023) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-023-00565-w · Cited by 11
“A key component of origami, the ancient art of paper folding, is transforming a planar paper sheet into a hierarchical 3D sculpture by creating predefined fold patterns on the paper [127–130].”
Plastic deformation of a permanently bonded network: Stress relaxation by pleats
Ganguly, S., Das, D., Horbach, J., Sollich, P., Karmakar, S., & Sengupta, S. (2018) · The Journal of Chemical Physics · doi:10.1063/1.5051312 · Cited by 10
Optimal number of faces for fast self-folding kirigami
Melo, H. P. M., Dias, C. S., & Araújo, N. A. M. (2020) · Communications Physics · doi:10.1038/s42005-020-00423-0 · Cited by 10
“[6] L.”
BackgroundA Computational Design Synthesis Method for the Generation of Rigid Origami Crease Patterns
Zimmermann, L., Shea, K., & Stanković, T. (2021) · Journal of Mechanisms and Robotics · doi:10.1115/1.4052847 · Cited by 10
Computational Study of Non-Porous Auxetic Plates with Diamond Shape Inclusions
Afshar, A., & Rezvanpour, H. (2022) · Journal of Composites Science · doi:10.3390/jcs6070192 · Cited by 10
Rigidisation of deployable space polymer membranes by heat-activated self-folding
Wu, R., Roberts, P. C. E., Lyu, S., Soutis, C., Zheng, F., Diver, C., Grésil, M., & Blaker, J. J. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aadc72 · Cited by 10
Mechanics of Drosophila wing deployment
Hadjaje, S., Andrade-Silva, I., Dalbe, M.-J., Clément, R., & Marthelot, J. (2024) · Nature Communications · doi:10.1038/s41467-024-54527-0 · Cited by 9
Metadata
- Authors
- Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L.
- Affiliations
- Harvard University (US)
- The University of Tokyo (JP)
- Corresponding author
- Mahadevan, L.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 5
- Pages
- 583-588
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2273175535
- Semantic Scholar
- 474a0f972a1f02097c67324c81e38202fd02863e
- Cited by
- 486
- References
- 24
- Citations by year
- 2026: 36 · 2025: 44 · 2024: 48 · 2023: 60 · 2022: 52 · 2021: 60 · 2020: 51 · 2019: 37 · 2018: 49 · 2017: 37 · 2016: 12
- FWCI
- 39.94
- Type
- journal article
- Language
- en
- Open access
- green
- arxiv.org
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- arXiv (Cornell University)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Analysis and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Keywords
- origami tessellations, curved surfaces, constrained optimization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.