Programming curvature using origami tessellations
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Origami describes rules for creating folded structures from patterns on a flat sheet, but does not prescribe how patterns can be designed to fit target shapes. Here, starting from the simplest periodic origami pattern that yields one-degree-of-freedom collapsible structures-we show that scale-independent elementary geometric constructions and constrained optimization algorithms can be used to determine spatially modulated patterns that yield approximations to given surfaces of constant or varying curvature. Paper models confirm the feasibility of our calculations. We also assess the difficulty of realizing these geometric structures by quantifying the energetic barrier that separates the metastable flat and folded states. Moreover, we characterize the trade-off between the accuracy to which the pattern conforms to the target surface, and the effort associated with creating finer folds. Our approach enables the tailoring of origami patterns to drape complex surfaces independent of absolute scale, as well as the quantification of the energetic and material cost of doing so.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“since vertices with three or fewer edges are completely rigid while vertices with more than four edges are too soft (that is, have multiple continuous degrees of freedom).”
From Self-folding origami at any energy scale (2017) · cites this paper as [11]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bowden, N., Brittain, S., Evans, A. G., Hutchinson, J. W., & Whitesides, G. M. (1998) · Nature · doi:10.1038/30193 · Cited by 2,305 · cited 1×
“It also occurs in many natural settings, including insect wings and leaves ( 4, 5 ), vertebrate guts ( 6 ) and is the result of the spontaneous wrinkling of soft adherent thin elastic films ( 7–9 ).”
BackgroundUsing origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Geometry of Miura-folded metamaterials
Schenk, M., & Guest, S. D. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1217998110 · Cited by 1,009
Blees, M. K., Barnard, A. W., Rose, P. A., Roberts, S. P., McGill, K. L., Huang, P. Y., Ruyack, A. R., Kevek, J. W., Kobrin, B., Muller, D. A., et al. (2015) · Nature · doi:10.1038/nature14588 · Cited by 891 · cited 1×
“1b), and previous origami ( 17–19 ) and kirigami ( 20–22 ) surface approximations, to pose the inverse problem of fitting Miura-like origami tessellations to surfaces with intrinsic curvature.”
BackgroundChen, Y., Peng, R., & You, Z. (2015) · Science · doi:10.1126/science.aab2870 · Cited by 563 · cited 1×
“llations that conform to prescribed surfaces. For generalized cylinders, we have shown that the constructed pattern is rigid-foldable and flat-foldable, and thus can be easily adapted to thick origami (25). For doubly-curved surfaces, our computational tool allows us to calculate physically realizable tessellations whi…”
MethodVillification: How the Gut Gets Its Villi
Shyer, A. E., Tallinen, T., Nerurkar, N. L., Wei, Z., Gil, E. S., Kaplan, D. L., Tabin, C. J., & Mahadevan, L. (2013) · Science · doi:10.1126/science.1238842 · Cited by 562
Self-citationOrigami structures with a critical transition to bistability arising from hidden degrees of freedom
Silverberg, J. L., Na, J.-H., Evans, A. A., Liu, B., Hull, T. C., Santangelo, C. D., Lang, R. J., Hayward, R. C., & Cohen, I. (2015) · Nature Materials · doi:10.1038/nmat4232 · Cited by 492
Geometric Folding Algorithms: Linkages, Origami, Polyhedra
Demaine, E. D., & O’Rourke, J. (2007) · Cited by 409
Geometric Mechanics of Periodic Pleated Origami
Wei, Z. Y., Guo, Z. V., Dudte, L., Liang, H. Y., & Mahadevan, L. (2013) · Physical Review Letters · doi:10.1103/physrevlett.110.215501 · Cited by 409 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
BackgroundSelf-citationOrigami Multistability: From Single Vertices to Metasheets
Waitukaitis, S., Menaut, R., Chen, B. G.-G., & van Hecke, M. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.055503 · Cited by 326 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
Background
Research works printed but not linked: 2
- Tachi, T. Hangai prize papers for 2009: generalization of rigid-foldable quadrilateral-mesh origami. J. IASS 50, 173–179 (2009).
- Kawasaki, T. Proc. 1st Int. Meeting Origami Sci. Technol. (ed. Huzita, H.) 229–237 (1989).
Cited by
Flexible mechanical metamaterials
Bertoldi, K., Vitelli, V., Christensen, J., & van Hecke, M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.66 · Cited by 1,867
Nature-Inspired Structural Materials for Flexible Electronic Devices
Liu, Y., He, K., Chen, G., Leow, W. R., & Chen, X. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00291 · Cited by 798
Materials and Structures toward Soft Electronics
Wang, C., Wang, C., Huang, Z., & Xu, S. (2018) · Advanced Materials · doi:10.1002/adma.201801368 · Cited by 662
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 620
Zhai, Z., Wang, Y., & Jiang, H. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1720171115 · Cited by 480
Bistable auxetic mechanical metamaterials inspired by ancient geometric motifs
Rafsanjani, A., & Pasini, D. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.001 · Cited by 476
“Moreover, origami [27, 28, 29] and kirigami [30, 31, 32], respectively known as the arts of folding and cutting of paper, provide an alternative tool for designing auxetic metamaterials.”
MethodMechanical metamaterials: a state of the art
Barchiesi, E., Spagnuolo, M., & Placidi, L. (2019) · Mathematics and Mechanics of Solids · doi:10.1177/1081286517735695 · Cited by 433
“A remarkable example of a metamaterial inspired by origami is provided by the Miura-ori tessellated structure, which is shown in Figure 1c in [94].”
MethodMultistable inflatable origami structures at the metre scale
Melancon, D., Gorissen, B., García-Mora, C. J., Hoberman, C., & Bertoldi, K. (2021) · Nature · doi:10.1038/s41586-021-03407-4 · Cited by 433
From flat sheets to curved geometries: Origami and kirigami approaches
Callens, S. J. P., & Zadpoor, A. A. (2018) · Materials Today · doi:10.1016/j.mattod.2017.10.004 · Cited by 433
Engineering Origami: A Comprehensive Review of Recent Applications, Design Methods, and Tools
Meloni, M., Cai, J., Zhang, Q., Sang‐Hoon Lee, D., Li, M., Ma, R., Parashkevov, T. E., & Feng, J. (2021) · Advanced Science · doi:10.1002/advs.202000636 · Cited by 411
Morphable 3D mesostructures and microelectronic devices by multistable buckling mechanics
Fu, H., Nan, K., Bai, W., Huang, W., Bai, K., Lu, L., Zhou, C., Liu, Y., Liu, F., Wang, J., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0011-3 · Cited by 393
Vibration control based metamaterials and origami structures: A state-of-the-art review
Ji, J. C., Luo, Q., & Ye, K. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107945 · Cited by 386
Rational design of reconfigurable prismatic architected materials
Overvelde, J. T. B., Weaver, J. C., Hoberman, C., & Bertoldi, K. (2017) · Nature · doi:10.1038/nature20824 · Cited by 362
Programming shape using kirigami tessellations
Choi, G. P. T., Dudte, L. H., & Mahadevan, L. (2019) · Nature Materials · doi:10.1038/s41563-019-0452-y · Cited by 332
Self-citationYao, S., Ren, P., Song, R., Liu, Y., Huang, Q., Dong, J., O'Connor, B. T., & Zhu, Y. (2020) · Advanced Materials · doi:10.1002/adma.201902343 · Cited by 324
Programmable Self‐Locking Origami Mechanical Metamaterials
Fang, H., Chu, S. A., Xia, Y., & Wang, K. (2018) · Advanced Materials · doi:10.1002/adma.201706311 · Cited by 328
Bar and hinge models for scalable analysis of origami
Filipov, E. T., Liu, K., Tachi, T., Schenk, M., & Paulino, G. H. (2017) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2017.05.028 · Cited by 315
“The energy approach has been modified and has been used to provide fundamental studies on origami (Silverberg et al., 2014; Dudte et al., 2016).”
BackgroundMethodSelf-citationArchitected Origami Materials: How Folding Creates Sophisticated Mechanical Properties
Li, S., Fang, H., Sadeghi, S., Bhovad, P., & Wang, K. (2019) · Advanced Materials · doi:10.1002/adma.201805282 · Cited by 320
Rafsanjani, A., & Bertoldi, K. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.084301 · Cited by 309
“Our buckling-induced strategy not only provides a simple route for manufacturing kirigami sheets, but can also be combined with optimization techniques to design perforated patterns capable of generating desired complex 3D surfaces under external loading [9, 11, 41].”
MethodMechanical metamaterials based on origami and kirigami
Zhai, Z., Wu, L., & Jiang, H. (2021) · Applied Physics Reviews · doi:10.1063/5.0051088 · Cited by 279
Origami and 4D printing of elastomer-derived ceramic structures
Liu, G., Zhao, Y., Wu, G., & Lu, J. (2018) · Science Advances · doi:10.1126/sciadv.aat0641 · Cited by 270
Ning, X., Wang, X., Zhang, Y., Yu, X., Choi, D., Zheng, N., Kim, D. S., Huang, Y., Zhang, Y., & Rogers, J. A. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800284 · Cited by 273
Kirigami‐Inspired Inflatables with Programmable Shapes
Jin, L., Forte, A. E., Deng, B., Rafsanjani, A., & Bertoldi, K. (2020) · Advanced Materials · doi:10.1002/adma.202001863 · Cited by 262
Origami Metamaterials for Tunable Thermal Expansion
Boatti, E., Vasios, N., & Bertoldi, K. (2017) · Advanced Materials · doi:10.1002/adma.201700360 · Cited by 260
Origami by Frontal Photopolymerization
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Science Advances · doi:10.1126/sciadv.1602326 · Cited by 256
“INTRODUCTION Three-dimensional (3D) origami structures are of great interest in microelectronics (1), soft sensors and actuators (2), mechanical metamaterials (3), and biomedical devices (4).”
BackgroundProgramming the shape-shifting of flat soft matter
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2018) · Materials Today · doi:10.1016/j.mattod.2017.08.026 · Cited by 252
3D-printed programmable tensegrity for soft robotics
Lee, H., Jang, Y., Choe, J. K., Lee, S., Song, H., Lee, J. P., Lone, N., & Kim, J. (2020) · Science Robotics · doi:10.1126/scirobotics.aay9024 · Cited by 232
Origami and Kirigami Nanocomposites
Xu, L., Shyu, T. C., & Kotov, N. A. (2017) · ACS Nano · doi:10.1021/acsnano.7b03287 · Cited by 232
Chen, S., Chen, J., Zhang, X., Li, Z.-Y., & Li, J. (2020) · Light: Science & Applications · doi:10.1038/s41377-020-0309-9 · Cited by 222
Origami-based cellular metamaterial with auxetic, bistable, and self-locking properties
Kamrava, S., Mousanezhad, D., Ebrahimi, H., Ghosh, R., & Vaziri, A. (2017) · Scientific Reports · doi:10.1038/srep46046 · Cited by 212
Design and application of ‘J-shaped’ stress–strain behavior in stretchable electronics: a review
Ma, Y., Feng, X., Rogers, J. A., Huang, Y., & Zhang, Y. (2017) · Lab on a Chip · doi:10.1039/c7lc00289k · Cited by 211
Programmable multi-physical mechanics of mechanical metamaterials
Sinha, P., & Mukhopadhyay, T. (2023) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2023.100745 · Cited by 196
“The subsequent classification of origami metamaterials can be based on different patterns such as Miura [155], assembled Miura [156], waterbomb [25], eggbox [157,158], kresling [159], square-twist [160] and different other multi-DOF rigid origami [161].”
Critical slowing down in purely elastic ‘snap-through’ instabilities
Gomez, M., Moulton, D. E., & Vella, D. (2017) · Nature Physics · doi:10.1038/nphys3915 · Cited by 177
“Many elastic structures have two possible equilibrium states [1]: from umbrellas that become inverted in a sudden gust of wind, to nanoelectromechanical switches [2, 3], origami patterns [4, 5] and the hopper popper, which jumps after being turned inside-out [6].”
BackgroundActive Materials for Functional Origami
Leanza, S., Wu, S., Sun, X., Qi, H. J., & Zhao, R. R. (2024) · Advanced Materials · doi:10.1002/adma.202302066 · Cited by 169
Engineered Tissue Folding by Mechanical Compaction of the Mesenchyme
Hughes, A. J., Miyazaki, H., Coyle, M. C., Zhang, J., Laurie, M. T., Chu, D., Vavrušová, Z., Schneider, R. A., Klein, O. D., & Gartner, Z. J. (2018) · Developmental Cell · doi:10.1016/j.devcel.2017.12.004 · Cited by 177
“The Miura fold has several unusual geometric features, including the capability to be fit generically to complex target surfaces (Dudte et al., 2016).”
Bistable Auxetic Mechanical Metamaterials Inspired by Ancient Geometric MotifsPreprint
Rafsanjani, A., & Pasini, D. (n.d.) · RePEc: Research Papers in Economics · Cited by 169
Rapid deployment of curved surfaces via programmable auxetics
Luković, M. K., Panetta, J., Crane, K., & Pauly, M. V. (2018) · ACM Transactions on Graphics · doi:10.1145/3197517.3201373 · Cited by 169
Longo, S. J., Cox, S. M., Azizi, E., Ilton, M., Olberding, J. P., Pierre, R. S., & Patek, S. N. (2019) · Journal of Experimental Biology · doi:10.1242/jeb.197889 · Cited by 169
“Likewise, the material deformation inherent to spring actuation aligns LaMSA investigations with the burgeoning fields of mathematical and synthetic material geometries and energetics (Evans et al., 2015; Dudte et al., 2016; Gladman et al., 2016; Levin et al., 2016).”
BackgroundCoulais, C., Kettenis, C., & van Hecke, M. (2017) · Nature Physics · doi:10.1038/nphys4269 · Cited by 170
Desolvation Induced Origami of Photocurable Polymers by Digit Light Processing
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600625 · Cited by 153
Zhang, H., Wu, J. J., Fang, D., & Zhang, Y. (2021) · Science Advances · doi:10.1126/sciadv.abf1966 · Cited by 163
Liu, Y., Zhang, W., Zhang, F., Lan, X., Leng, J., Liu, S., Jia, X., Cotton, C., Sun, B., Gu, B., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.053 · Cited by 148
“Origami, which probably originated with the invention of paper in China and refined in Japan [1], is an ancient art of paper folding of crease patterns on a two dimensional (2D) sheet to form complicated three dimensional (3D) structures.”
BackgroundElasticity and stability of shape-shifting structures
Holmes, D. P. (2019) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2019.02.008 · Cited by 162
Liu, K., Tachi, T., & Paulino, G. H. (2019) · Nature Communications · doi:10.1038/s41467-019-11935-x · Cited by 146
Self-citationInflatable Origami: Multimodal Deformation via Multistability
Melancon, D., Forte, A. E., Kamp, L. M., Gorissen, B., & Bertoldi, K. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201891 · Cited by 174
A Review on Origami Simulations: From Kinematics, To Mechanics, Toward Multiphysics
Zhu, Y., Schenk, M., & Filipov, E. T. (2022) · Applied Mechanics Reviews · doi:10.1115/1.4055031 · Cited by 144
Pratapa, P. P., Liu, K., & Paulino, G. H. (2019) · Physical Review Letters · doi:10.1103/physrevlett.122.155501 · Cited by 140
Origami With Rotational Symmetry: A Review on Their Mechanics and Design
Lu, L., Leanza, S., & Zhao, R. R. (2023) · Applied Mechanics Reviews · doi:10.1115/1.4056637 · Cited by 137
“(b) Initial guess of the generalized Miura-ori tessellation with fixed and free nodes for the numerical optimization method [90].”
BackgroundMethodInfluentialPlant-inspired adaptive structures and materials for morphing and actuation: a review
Li, S., & Wang, K. (2016) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/12/1/011001 · Cited by 132
Shi, P., Chen, Y., Wei, J., Xie, T., Feng, J., & Sareh, P. (2024) · Thin-Walled Structures · doi:10.1016/j.tws.2024.111607 · Cited by 123
Active Reconfigurable Tristable Square‐Twist Origami
Wang, L., Song, W., Zhang, Y., Qu, M., Zhao, Z., Chen, M., Yang, Y., Chen, H., & Fang, D. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909087 · Cited by 123
Rigidly flat-foldable class of lockable origami-inspired metamaterials with topological stiff states
Jamalimehr, A., Mirzajanzadeh, M., Akbarzadeh, A., & Pasini, D. (2022) · Nature Communications · doi:10.1038/s41467-022-29484-1 · Cited by 121
Shape-morphing architected sheets with non-periodic cut patterns
Celli, P., McMahan, C., Ramirez, B., Bauhofer, A. A., Naify, C. J., Hofmann, D. C., Audoly, B., & Daraio, C. (2018) · Soft Matter · doi:10.1039/c8sm02082e · Cited by 135
Learning Without Neurons in Physical Systems
Stern, M., & Murugan, A. (2023) · Annual Review of Condensed Matter Physics · doi:10.1146/annurev-conmatphys-040821-113439 · Cited by 177
Programming temporal morphing of self-actuated shells
Guseinov, R., McMahan, C., Pérez, J., Daraio, C., & Bickel, B. (2020) · Nature Communications · doi:10.1038/s41467-019-14015-2 · Cited by 129
Morphing matter: from mechanical principles to robotic applications
Yang, X., Zhou, Y., Zhao, H., Huang, W., Wang, Y., Hsia, K. J., & Liu, M. (2023) · Soft Science · doi:10.20517/ss.2023.42 · Cited by 127
Developability of triangle meshes
Stein, O., Grinspun, E., & Crane, K. (2018) · ACM Transactions on Graphics · doi:10.1145/3197517.3201303 · Cited by 111
CurveUps: shaping objects from flat plates with tension-actuated curvature
Гусейнов, Р. Э., Miguel, E., & Bickel, B. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3073709 · Cited by 118
“Previous works in this area have studied origami patterns [Demaine and O’Rourke 2007; Dudte et al. 2016; Massarwi et al. 2007] and folding based on curved creases [Kilian et al. 2008; Mitani and Igarashi 2011].”
BackgroundAdvanced lightweight composite shells: Manufacturing, mechanical characterizations and applications
Gao, Y., Li, Z., Wei, X., Du, Y., Zhou, Z., & Xiong, J. (2024) · Thin-Walled Structures · doi:10.1016/j.tws.2024.112286 · Cited by 100
Jigsaw puzzle design of pluripotent origami
Dieleman, P., Vasmel, N., Waitukaitis, S., & van Hecke, M. (2019) · Nature Physics · doi:10.1038/s41567-019-0677-3 · Cited by 100
A Review on Hierarchical Origami and Kirigami Structure for Engineering Applications
Park, J. J., Won, P., & Ko, S. H. (2019) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00027-2 · Cited by 96
Metallic stacked origami cellular materials: Additive manufacturing, properties, and modelling
Harris, J. A., & McShane, G. J. (2019) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2019.09.007 · Cited by 96
Gillman, A. S., Fuchi, K., & Buskohl, P. R. (2018) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2018.05.011 · Cited by 95
Reconfigurable origami-inspired multistable metamorphous structures
Wang, C., Guo, H., Liu, R., Deng, Z., Chen, Y., & You, Z. (2024) · Science Advances · doi:10.1126/sciadv.adk8662 · Cited by 89
Impact response of metallic stacked origami cellular materials
Harris, J. A., & McShane, G. J. (2020) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2020.103730 · Cited by 89
Inverse design of deployable origami structures that approximate a general surface
Dang, X., Feng, F., Plucinsky, P., James, R. D., Duan, H., & Wang, J. (2021) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2021.111224 · Cited by 86
“In particular, a common approach to constrained optimization is to introduce additional constraints that are consistent with the desired objective.”
BackgroundWell-rounded devices: the fabrication of electronics on curved surfaces – a review
Rich, S. I., Jiang, Z., Fukuda, K., & Someya, T. (2021) · Materials Horizons · doi:10.1039/d1mh00143d · Cited by 88
Origami Paper-Based Stretchable Humidity Sensor for Textile-Attachable Wearable Electronics
Chen, X., Li, Y., Wang, X., & Yu, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c08245 · Cited by 89
Origami Metawall: Mechanically Controlled Absorption and Deflection of Light
Li, M., Shen, L., Jing, L., Xu, S., Zheng, B., Lin, X., Yang, Y., Wang, Z., & Chen, H. (2019) · Advanced Science · doi:10.1002/advs.201901434 · Cited by 85
Zhang, H., Yang, C., Yu, Y., Zhou, Y., Quan, L., Dong, S., & Luo, J. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105177 · Cited by 84
Topological defects produce exotic mechanics in complex metamaterials
Meeussen, A. S., Oğuz, E. C., Shokef, Y., & van Hecke, M. (2020) · Nature Physics · doi:10.1038/s41567-019-0763-6 · Cited by 97
Extreme Mechanics: Self-Folding Origami
Santangelo, C. D. (2017) · Annual Review of Condensed Matter Physics · doi:10.1146/annurev-conmatphys-031016-025316 · Cited by 81
3D printing of complex origami assemblages for reconfigurable structures
Zhao, Z., Kuang, X., Wu, J., Zhang, Q., Paulino, G. H., Qi, H. J., & Fang, D. (2018) · Soft Matter · doi:10.1039/c8sm01341a · Cited by 87
The designs and deformations of rigidly and flat-foldable quadrilateral mesh origami
Feng, F., Dang, X., James, R. D., & Plucinsky, P. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.104018 · Cited by 79
“Nevertheless, some results are beginning to emerge in this direction for stimuli-responsive materials [1, 22, 44, 54], kirigami [9], and origami [14, 16, 34].”
BackgroundResultDesign and foldability of Miura-based cylindrical origami structures
Du, Y., Keller, T. A., Song, C., Xiao, Z., Wu, L., & Xiong, J. (2020) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107311 · Cited by 78
A study on ballistic performance of origami sandwich panels
Zhang, J., Lu, G., Zhang, Y., & You, Z. (2021) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2021.103925 · Cited by 78
Origami/Kirigami‐Guided Morphing of Composite Sheets
Cui, J., Poblete, F. R., & Zhu, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802768 · Cited by 81
Dudek, K. K., Kadic, M., Coulais, C., & Bertoldi, K. (2025) · Nature Reviews Materials · doi:10.1038/s41578-025-00828-9 · Cited by 92
Mechanical Metamaterials for Sensor and Actuator Applications
Pyo, S., & Park, K. (2023) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-023-00549-w · Cited by 73
Castle, T., Sussman, D. M., Tanis, M., & Kamien, R. D. (2016) · Science Advances · doi:10.1126/sciadv.1601258 · Cited by 71
Inverse Design Strategies for 3D Surfaces Formed by Mechanically Guided Assembly
Fan, Z., Yang, Y., Zhang, F., Xu, Z., Zhao, H., Wang, T., Song, H., Huang, Y. Y., Rogers, J. A., & Zhang, Y. (2020) · Advanced Materials · doi:10.1002/adma.201908424 · Cited by 75
Review on recent origami inspired antennas from microwave to terahertz regime
Shah, S. I. H., & Lim, S. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109345 · Cited by 72
Malomo, L., Pérez, J., Iarussi, E., Pietroni, N., Miguel, E., Cignoni, P., & Bickel, B. (2018) · ACM Transactions on Graphics · doi:10.1145/3272127.3275076 · Cited by 68
A bar and hinge model formulation for structural analysis of curved-crease origami
Woodruff, S. R., & Filipov, E. T. (2020) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2020.08.010 · Cited by 68
“[28] to describe the bending stiffness.”
Shape-morphing materials and structures for energy-efficient building envelopes
Li, Y., Zhao, Y., Chi, Y., Hong, Y., & Yin, J. (2021) · Materials Today Energy · doi:10.1016/j.mtener.2021.100874 · Cited by 70
Pneumatic cells toward absolute Gaussian morphing
Gao, T., Bico, J., & Roman, B. (2023) · Science · doi:10.1126/science.adi2997 · Cited by 74
Lee, B., Cho, H. K., Jeong, S., Yoon, J., Jang, D., Lee, D., Kim, D., Chung, S., & Hong, Y. (2022) · Journal of Information Display · doi:10.1080/15980316.2022.2070291 · Cited by 72
Buffering by buckling as a route for elastic deformation
Vella, D. (2019) · Nature Reviews Physics · doi:10.1038/s42254-019-0063-1 · Cited by 71
Programming stiff inflatable shells from planar patterned fabrics
Siéfert, E., Reyssat, É., Bico, J., & Roman, B. (2020) · Soft Matter · doi:10.1039/d0sm01041c · Cited by 66
Petko, F., Świeży, A., & Ortyl, J. (2021) · Polymer Chemistry · doi:10.1039/d1py00596k · Cited by 69
Inverse Design of Inflatable Soft Membranes Through Machine Learning
Forte, A. E., Hanakata, P. Z., Jin, L., Zari, E., Zareei, A., Fernandes, M. C., Sumner, L., Alvarez, J. T., & Bertoldi, K. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202111610 · Cited by 65
A novel mechanical metamaterial with simultaneous stretching- and compression-expanding property
Wu, W., Liu, P., & Kang, Z. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109930 · Cited by 63
Shi, Y., Zhang, F., Nan, K., Wang, X. S., Wang, J., Zhang, Y., Zhang, Y., Luan, H., Hwang, K., Huang, Y. Y., et al. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.11.008 · Cited by 63
Decorated bacteria-cellulose ultrasonic metasurface
Li, Z., Chen, K., Li, F., Shi, Z., Sun, Q., Li, P.-Q., Peng, Y., Huang, L., Yang, G., Zheng, H., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-41172-2 · Cited by 63
“…by the paper-cutting art, the techniques of paper-cutting and folding were used to fashion cellulose thin fi lms (or sheets) into complex structures with unconventional mechanical and morphological responses 5 – 7 , further leading to the implementation of biocompatible fl exible devices 8,9 .”
MethodEnergy absorption of graded thin-walled origami tubes
He, J., Wen, G., Zhao, S., Liu, J., Kitipornchai, S., & Yang, J. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2024.109609 · Cited by 60
A modular continuous robot constructed by Miura-derived origami tubes
He, J., Wen, G., Liu, J., Liang, X. U. E., & Xie, Y. M. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108690 · Cited by 59
Wang, F., Gong, H., Chen, X., & Chen, C. (2016) · Scientific Reports · doi:10.1038/srep33312 · Cited by 59
“α φ θ φ θ = + − − − − − cos (1 cos )(1 cos ) 4 (1 cos )(1 cos ) (11) i p i p p i p 1”
Mechanically Guided Post‐Assembly of 3D Electronic Systems
Kim, B. H., Liu, F., Yu, Y., Jang, H., Xie, Z., Li, K., Lee, J., Jeong, J. Y., Ryu, A., Lee, Y., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803149 · Cited by 59
Conical Kresling origami and its applications to curvature and energy programming
Lu, L., Dang, X., Feng, F., Lv, P., & Duan, H. (2022) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2021.0712 · Cited by 63
Kamrava, S., Mousanezhad, D., Felton, S. M., & Vaziri, A. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700276 · Cited by 58
Metadata
- Authors
- Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L.
- Affiliations
- Harvard University (US)
- The University of Tokyo (JP)
- Corresponding author
- Mahadevan, L.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 5
- Pages
- 583-588
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2273175535
- Semantic Scholar
- 474a0f972a1f02097c67324c81e38202fd02863e
- Cited by
- 486
- References
- 24
- Citations by year
- 2026: 36 · 2025: 44 · 2024: 48 · 2023: 60 · 2022: 52 · 2021: 60 · 2020: 51 · 2019: 37 · 2018: 49 · 2017: 37 · 2016: 12
- FWCI
- 39.94
- Type
- journal article
- Language
- en
- Open access
- green
- arxiv.org
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- arXiv (Cornell University)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Analysis and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Keywords
- origami tessellations, curved surfaces, constrained optimization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.