Programming curvature using origami tessellations
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Origami describes rules for creating folded structures from patterns on a flat sheet, but does not prescribe how patterns can be designed to fit target shapes. Here, starting from the simplest periodic origami pattern that yields one-degree-of-freedom collapsible structures-we show that scale-independent elementary geometric constructions and constrained optimization algorithms can be used to determine spatially modulated patterns that yield approximations to given surfaces of constant or varying curvature. Paper models confirm the feasibility of our calculations. We also assess the difficulty of realizing these geometric structures by quantifying the energetic barrier that separates the metastable flat and folded states. Moreover, we characterize the trade-off between the accuracy to which the pattern conforms to the target surface, and the effort associated with creating finer folds. Our approach enables the tailoring of origami patterns to drape complex surfaces independent of absolute scale, as well as the quantification of the energetic and material cost of doing so.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“since vertices with three or fewer edges are completely rigid while vertices with more than four edges are too soft (that is, have multiple continuous degrees of freedom).”
From Self-folding origami at any energy scale (2017) · cites this paper as [11]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bowden, N., Brittain, S., Evans, A. G., Hutchinson, J. W., & Whitesides, G. M. (1998) · Nature · doi:10.1038/30193 · Cited by 2,305 · cited 1×
“It also occurs in many natural settings, including insect wings and leaves ( 4, 5 ), vertebrate guts ( 6 ) and is the result of the spontaneous wrinkling of soft adherent thin elastic films ( 7–9 ).”
BackgroundUsing origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Geometry of Miura-folded metamaterials
Schenk, M., & Guest, S. D. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1217998110 · Cited by 1,009
Blees, M. K., Barnard, A. W., Rose, P. A., Roberts, S. P., McGill, K. L., Huang, P. Y., Ruyack, A. R., Kevek, J. W., Kobrin, B., Muller, D. A., et al. (2015) · Nature · doi:10.1038/nature14588 · Cited by 891 · cited 1×
“1b), and previous origami ( 17–19 ) and kirigami ( 20–22 ) surface approximations, to pose the inverse problem of fitting Miura-like origami tessellations to surfaces with intrinsic curvature.”
BackgroundChen, Y., Peng, R., & You, Z. (2015) · Science · doi:10.1126/science.aab2870 · Cited by 563 · cited 1×
“llations that conform to prescribed surfaces. For generalized cylinders, we have shown that the constructed pattern is rigid-foldable and flat-foldable, and thus can be easily adapted to thick origami (25). For doubly-curved surfaces, our computational tool allows us to calculate physically realizable tessellations whi…”
MethodVillification: How the Gut Gets Its Villi
Shyer, A. E., Tallinen, T., Nerurkar, N. L., Wei, Z., Gil, E. S., Kaplan, D. L., Tabin, C. J., & Mahadevan, L. (2013) · Science · doi:10.1126/science.1238842 · Cited by 562
Self-citationOrigami structures with a critical transition to bistability arising from hidden degrees of freedom
Silverberg, J. L., Na, J.-H., Evans, A. A., Liu, B., Hull, T. C., Santangelo, C. D., Lang, R. J., Hayward, R. C., & Cohen, I. (2015) · Nature Materials · doi:10.1038/nmat4232 · Cited by 492
Geometric Folding Algorithms: Linkages, Origami, Polyhedra
Demaine, E. D., & O’Rourke, J. (2007) · Cited by 409
Geometric Mechanics of Periodic Pleated Origami
Wei, Z. Y., Guo, Z. V., Dudte, L., Liang, H. Y., & Mahadevan, L. (2013) · Physical Review Letters · doi:10.1103/physrevlett.110.215501 · Cited by 409 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
BackgroundSelf-citationOrigami Multistability: From Single Vertices to Metasheets
Waitukaitis, S., Menaut, R., Chen, B. G.-G., & van Hecke, M. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.055503 · Cited by 326 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
Background
Research works printed but not linked: 2
- Tachi, T. Hangai prize papers for 2009: generalization of rigid-foldable quadrilateral-mesh origami. J. IASS 50, 173–179 (2009).
- Kawasaki, T. Proc. 1st Int. Meeting Origami Sci. Technol. (ed. Huzita, H.) 229–237 (1989).
Cited by
Items 301–400 of 481
McInerney, J., Misseroni, D., Rocklin, D. Z., Paulino, G. H., & Mao, X. (2025) · Nature Communications · doi:10.1038/s41467-025-57089-x · Cited by 11
“Such approximations are valuable for both surface fi tting 27 and effective elasticity models 28 – 30 , where deformations that do not stretch the individual panels generate apparently non-isometric deformations at the large scale.”
Hybrid[4]arene-Based Supramolecular Tessellations Driven by Exo-Wall Interaction
Liang, M., Chen, J., Hou, J., Wu, S., Wang, Y., Dong, Q., & Zhou, J. (2025) · Crystal Growth & Design · doi:10.1021/acs.cgd.4c01547 · Cited by 9
Inverse design of three-dimensional surfaces via waterbomb tessellations
Zhao, Y. F., & Wei, Y. (2022) · Computer-Aided Design · doi:10.1016/j.cad.2022.103461 · Cited by 9
Theoretical and Finite Element Analysis of Origami and Kirigami Based Structures
Lv, C. X. (2016) · Cited by 9
Kim, G., Kim, Y., Yoo, S., Jang, H. S., & Ko, H. C. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000010 · Cited by 10
Instability-Induced Origami Design by Topology Optimization
Wang, W., Liu, K., Wu, M., Li, H., Lv, P., & Duan, H. (2023) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-023-00392-1 · Cited by 9
Programmable origami-inspired cellular architected building blocks for flow-regulating adaptive weir
Zhang, Z., Luce, B., Ma, C., Xie, B., & Hu, N. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.100974 · Cited by 9
Agile reversible shape-morphing of particle rafts
Son, K., Sun, J., & Kim, H. (2021) · Soft Matter · doi:10.1039/d1sm00564b · Cited by 9
Programming polymorphable yet stiff truss metamaterials in response to temperature
Ma, R., Liu, L., Wyman, O., & Pasini, D. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101432 · Cited by 11
“In this work, we have introduced a 3D truss concept for the unit cell that differs from existing thin layered structures [ 31 , 41 , 45 ] and can employ passive materials, resulting in stiff and lightweight structural architecture with morphing reversibility.”
MethodTunable wave coupling in periodically rotated Miura-ori tubes
TOMITA, S., & Tachi, T. (2024) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2024.0006 · Cited by 8
Self-citationA continuum geometric approach for inverse design of origami structures
Sardas, A., Moshe, M., & Maor, C. (2024) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2024.106003 · Cited by 8
“An example of an inverse design of GMO, which is at the focus of the current work, is presented in Dudte et al. (2016).”
BackgroundGradient design and fabrication methodology for interleaved self-locking kirigami panels
Qiu, H. N., Feng, Y., Gao, Y., Hong, Z., & Tan, J. (2023) · Computer-Aided Design · doi:10.1016/j.cad.2023.103632 · Cited by 8
Graded in-plane Miura origami as crawling robots and grippers
Fang, Q.-Y., Xu, S.-F., Chu, M.-S., Yan, T., Xu, Z.-L., Wu, T.-Y., Wang, D., Tachi, T., & Chuang, K. (2024) · Journal of Applied Physics · doi:10.1063/5.0181085 · Cited by 9
Self-citationNonlinear dynamics analysis of origami structures based on the bar hinge model
Sanaullah, Ani, L., & Heping, L. (2024) · Structures · doi:10.1016/j.istruc.2024.108088 · Cited by 8
Lattice Materials with Reversible Foldability
Ebrahimi, H., Mousanezhad, D., Haghpanah, B., Ghosh, R. R., & Vaziri, A. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600646 · Cited by 8
Exactly solvable flat-foldable quadrilateral origami tilings
Assis, M. (2018) · Physical review. E · doi:10.1103/physreve.98.032112 · Cited by 9
Acoustic wave focusing by doubly curved origami-inspired arrays
Srinivas, V., & Harne, R. L. (2020) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x20905984 · Cited by 8
“In addition, nearly arbitrary curvature may be introduced into Miura-ori using gradients (Dudte et al., 2016; Gattas et al., 2013).”
BackgroundMethodSlender origami with complex 3D folding shapes
Kamrava, S., Ghosh, R. R., Yang, Y. B., & Vaziri, A. (2018) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/124/58001 · Cited by 8
Geometric optimization using nonlinear rotation-invariant coordinates
Sassen, J., Heeren, B., Hildebrandt, K., & Rumpf, M. (2020) · Computer Aided Geometric Design · doi:10.1016/j.cagd.2020.101829 · Cited by 8
“For example, in Figure 10 we compare the computation of (almost) isometric geodesic paths between perfectly isometric end shapes taken from Dudte et al. [56] to vertex-based meth-ods.”
MethodCurving origami with mechanical frustration
Jules, T., Lechenault, F., & Adda-Bedia, M. (2021) · Extreme Mechanics Letters · doi:10.1016/j.eml.2021.101315 · Cited by 8
Dynamics of Miura-patterned foldable sheets in shear flow
Dutta, S., & Graham, M. D. (2017) · Soft Matter · doi:10.1039/c6sm02113a · Cited by 9
Imada, R., & Tachi, T. (2025) · Physical Review Research · doi:10.1103/physrevresearch.7.013032 · Cited by 10
Self-citationEntangled Multistable Origami with Reprogrammable Stiffness Amplification and Damping
Jamalimehr, A., Akbarzadeh, A., & Pasini, D. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202505620 · Cited by 7
Geometrically graded kiri-origami beams with enhanced energy absorption performance
He, R., Chen, Y., Ye, W., Chen, Z., Xie, T., Feng, J., & Sareh, P. (2026) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2026.111378 · Cited by 7
Practical folding meets measurable paper properties
Kouko, J., Kankkunen, T., Palmu, M., Niiranen, J., & Peltonen, K. (2023) · Materialia · doi:10.1016/j.mtla.2023.101871 · Cited by 8
Undulations in tubular origami tessellations: A connection to area-preserving maps
Imada, R., & Tachi, T. (2023) · Chaos An Interdisciplinary Journal of Nonlinear Science · doi:10.1063/5.0160803 · Cited by 7
Self-citationApproximating complex 3D curves using origami spring structures
Liu, Z., Zhang, Z., & Fang, H. (2023) · Communications Engineering · doi:10.1038/s44172-023-00149-1 · Cited by 7
“Although the desire to achieve complex 3D shape customization in origami structures has long been pursued 21,22 , it is important to acknowledge the associated challenges in terms of actuation and control.”
Evolution by natural induction
Watson, R. A. R., Levin, M. G., & Lewens, T. (2025) · Interface Focus · doi:10.1098/rsfs.2025.0025 · Cited by 9
Design and fabrication of multi-patch elastic geodesic grid structures
Pillwein, S., Kübert, J., Rist, F., & Musialski, P. (2021) · Computers & Graphics · doi:10.1016/j.cag.2021.06.002 · Cited by 7
“One more way to easily construct spatial shapes from flat sheets is by appropriately folding paper [11, 12], which is inherently related to the Japanese art of Origami [13].”
BackgroundShape reconfiguration through origami folding sets an upper limit on drag
Marzin, T., de Langre, E., & Ramananarivo, S. (2022) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2022.0592 · Cited by 10
“The crease pattern then acts as a linkage mechanism that conditions the three-dimensional morphing [21,22].”
BackgroundFolded isometric deformations and banana-shaped seedpod
Couturier, É. (2016) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2015.0760 · Cited by 7
Exploratory Design Method for Origami Pattern Generation in Engineering Applications
Meloni, M., Zhang, Q., & Cai, J. (2025) · Engineering · doi:10.1016/j.eng.2025.10.025 · Cited by 6
Smooth doubly curved origami shells with reprogrammable rigidity
Mirzajanzadeh, M., & Pasini, D. (2026) · Nature Communications · doi:10.1038/s41467-026-69562-2 · Cited by 6
Emergent nonlocal combinatorial design rules for multimodal metamaterials
van Mastrigt, R., Coulais, C., & van Hecke, M. (2023) · Physical review. E · doi:10.1103/physreve.108.065002 · Cited by 7
Origami of multi-layered spaced sheets
Tu, G., & Filipov, E. T. (2024) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2024.105730 · Cited by 6
“A large number of origami tessellations, such as the Miura-ori pattern, the Yoshimura pattern, and the Kresling pattern, can be used to build reconfigurable thin sheet structures (Evans et al., 2015; Callens and Zadpoor, 2018; Dudte et al., 2016).”
MatAIRials: Isotropic Inflatable Metamaterials for Freeform Surface Design
He, S., Wu, M., Lebée, A., & Skouras, M. (2025) · Computer Graphics Forum · doi:10.1111/cgf.70190 · Cited by 6
“…approaches in this area typically rely on patterns that locally expand [KCD ∗ 16, RB17, CPSP21], we generate Gaussian curvature by leveraging cells that locally contract, as also explored in some prior work related to freeform surface design using origami-inspired tesselations [DVTM16,SRVSH24].”
Increasing Reliability of Self-Folding of the Origami Hypar
Liu, A., Johnson, M., & Sung, C. (2022) · Journal of Mechanisms and Robotics · doi:10.1115/1.4054310 · Cited by 7
An origami like 3D patterned cellulose-based scaffold for bioengineering cardiovascular applications
Rodríguez, G. M., Trueb, D., Köser, J., Schoelkopf, J., & Gullo, M. R. (2023) · Cellulose · doi:10.1007/s10570-023-05492-2 · Cited by 6
“…are the low material costs, scalability, versatility and the possibility to fold planar origami substrates into complex volumetric structures (Dudte et al. 2016; Kuribayashi et al. 2006; Li et al. 2017; Rodrigues et al. 2017; Woodruff and Filipov 2021, 2022) such as heart ventricles (Ahmed…”
BackgroundLattice modes of periodic origami tessellations with voids
Lahiri, A., & Pratapa, P. P. (2023) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2023.104167 · Cited by 6
3D weaving with curved ribbons
Ren, Y., Panetta, J., Chen, T., Isvoranu, F., Poincloux, S., Brandt, C., Martin, A., & Pauly, M. V. (2021) · ACM Transactions on Graphics · doi:10.1145/3476576.3476698 · Cited by 6
Complex Surface Fabrication Via Developable Surface Approximation: A Survey
Yuan, C., Cao, N., & Shi, Y. (2025) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2025.3538782 · Cited by 6
“A common approach is to use a single sheet of paper to form specific 3D shapes, such as straight-line origami [96], [97], curved-line origami [98], [99], and “pop-up” art [100], [101].”
Xu, J., Xiao, M., & Gao, L. (2025) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2025.118243 · Cited by 5
Yang, W., Wang, W., Teng, X., Qiao, Z., & Yu, H. (2024) · Science China Technological Sciences · doi:10.1007/s11431-023-2674-7 · Cited by 5
Uniform Stretch Behavior of Creased Units
Zhang, Q., Meloni, M., Feng, J., & Cai, J. (2025) · Journal of Mechanisms and Robotics · doi:10.1115/1.4067623 · Cited by 5
Das, D., Horbach, J., Sollich, P., Saha‐Dasgupta, T., & Sengupta, S. (2020) · Physical Review Research · doi:10.1103/physrevresearch.2.043284 · Cited by 5
Geometric mechanics of kiri-origami-based bifurcated mechanical metamaterials
Li, Y., Zhou, C., & Yin, J. (2024) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2024.0010 · Cited by 10
“…structural reconfiguration or deployment, such as high stretchability [28–33], tunable negative Poisson’s ratio [34–37], instabilities and multistabilities [38–42], programmable shape morphing [26,43–46], topologically tunable mechanical responses [47] and encoded machine-like intelligence [48–52].”
BackgroundRigid-Foldable Doubly Curved Deployable Reflectors Based on Miura–Ori Pattern
Wang, T., & Santer, M. (2024) · Journal of Spacecraft and Rockets · doi:10.2514/1.a36107 · Cited by 5
Piecewise assembled acoustic arrays based on reconfigurable tessellated structures
Zou, C., & Harne, R. L. (2018) · The Journal of the Acoustical Society of America · doi:10.1121/1.5064281 · Cited by 5
Robust folding of elastic origami
Lee-Trimble, M. E., Kang, J., Hayward, R. C., & Santangelo, C. D. (2022) · Soft Matter · doi:10.1039/d2sm00369d · Cited by 5
A method of designing a prescribed energy landscape for morphing structures
Li, Y. (2022) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2022.111500 · Cited by 5
Flexible Kokotsakis Meshes with Skew Faces: Generalization of the Orthodiagonal Involutive Type
Aikyn, A., Liu, Y., Lyakhov, D. A., Rist, F., Pottmann, H., & Michels, D. L. (2023) · Computer-Aided Design · doi:10.1016/j.cad.2023.103669 · Cited by 7
“…origami [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14] and its use to approximate given target surfaces [15, 16], or so-called programmable meta-materials, which are based on special patterns and essentially constitute mechanisms, typically with many degrees of freedom [17, 18, 19, 20, 21, 22, 23].”
BackgroundA Computational Design Method for Tucking Axisymmetric Origami Consisting of Triangular Facets
Zhao, Y. F., Endo, Y., Kanamori, Y., & Mitani, J. (2018) · Symmetry · doi:10.3390/sym10100469 · Cited by 5
“[29] used modified Miura cells to approximate orientable 3D surfaces with positive, zero, negative, and mixed Gaussian curvatures.”
MethodUnderwater soft jet propulsion based on a hoberman mechanism
Iacoponi, S., Picardi, G., Chellapurath, M., Calisti, M., & Laschi, C. (2018) · IEEE International Conference on Soft Robotics (RoboSoft) · doi:10.1109/robosoft.2018.8405367 · Cited by 5
“varying curvature [28].”
Surface curvature regulation of 3D kirigami soft gripper
Wu, J., Yang, B., Li, Z., He, S., Bu, Y., Su, B., & Wang, Y. (2025) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2025.113410 · Cited by 4
Kirigami–Miura-ori thin-walled structures with improved impact resistance
Xu, B., Gao, Y., & Bai, W. (2025) · Structures · doi:10.1016/j.istruc.2025.110540 · Cited by 4
Ma, Z., Song, K., & Zhou, X. (2026) · Thin-Walled Structures · doi:10.1016/j.tws.2026.114750 · Cited by 4
Self‐Folding Method Using a Linkage Mechanism for Origami Structures
Sato, Y., & Iwase, E. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202200445 · Cited by 4
Automating Rigid Origami Design
Geiger, J., Martinkus, K., Richter, O., & Wattenhofer, R. P. (2023) · International Joint Conference on Artificial Intelligence · doi:10.24963/ijcai.2023/645 · Cited by 4
Mechanical Characteristics of Bistable Inflatable Folding Beam Structure
Zhao, L., & Sun, B. (2024) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455425501172 · Cited by 4
Origin of anticlastic curvature in a cellular metaplate
Toyonaga, T., & Wada, H. (2024) · Physical Review Research · doi:10.1103/physrevresearch.6.l032051 · Cited by 4
Buchanan, M. (2017) · Nature Physics · doi:10.1038/nphys4089 · Cited by 4
Lead the folding motion of the thick origami model under gravity
Zhang, T., & Kawaguchi, K. (2022) · Journal of Asian Architecture and Building Engineering · doi:10.1080/13467581.2022.2145210 · Cited by 4
“Therefore, the modeling and design methodologies (Tachi and Hull 2017; Dudte et al. 2016; Cai et al. 2016) improved to deal with engineering factors.”
MethodLocal Actuation of Tubular Origami
Grey, S., Scarpa, F. L., & Schenk, M. (2018) · Bristol Research (University of Bristol) · Cited by 4
Approximating a Target Surface with 1-DOF Rigid Origami
He, Z., & Guest, S. D. (2018) · Apollo (University of Cambridge) · doi:10.17863/cam.40185 · Cited by 4
Numerical Approximation of Orthogonal Maps
Alexandre Caboussat, A., Glowinski, R., Gourzoulidis, D., & Picasso, M. (2019) · SIAM Journal on Scientific Computing · doi:10.1137/19m1243683 · Cited by 4
Computational Design of an Additively Manufactured Origami-Based Hand Orthosis
Barros, M., Walker, A., & Stanković, T. (2022) · Proceedings of the Design Society · doi:10.1017/pds.2022.125 · Cited by 4
“The folding into a thickened plane-like configuration was used by Dudte et al. (2016) to develop a computational approach in which rotationally symmetric surfaces are folded using the same pattern.”
MethodProgrammable and Reconfigurable Surfaces with Kirigami-Inspired Bistable Elements
Zhang, Q., Pan, N., Cai, J., & Feng, J. (2021) · Journal of the International Association for Shell and Spatial Structures · doi:10.20898/j.iass.2021.013_2 · Cited by 4
Optimization of fiber orientation and topology for curved-folded laminated bamboo veneer shells
Meng, X., Xie, Y. M., & Ma, J. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118772 · Cited by 3
Reconfigurable acoustic focusing based on origami-inspired metalens
Liu, C., Wang, N., Liu, T., Gu, Z., Li, Y., & Zhu, J. (2025) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2025.119096 · Cited by 3
Wang, L., & Feng, F. (2025) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2025.106460 · Cited by 3
“Among various shape programming 1 techniques, origami—the ancient art of paper folding—offers a promising platform for designing complex configurations through coordinated folding lines [4, 5, 6, 7].”
Reconfigurable Hinged Kirigami Tessellations
Segall, A., Ren, J., Padilla, M., & Sorkine‐Hornung, O. (2025) · SIGGRAPH Asia Conference Papers · doi:10.1145/3757377.3763895 · Cited by 3
“These manipulations include folding flat sheet materials such as paper or metal, commonly known as origami [Wei et al. 2013; Dudte et al. 2016; Narumi et al. 2023], cutting flat sheets with interconnected hinges (a technique often regarded as a subset of kirigami) [Konaković et al. 2016, 2018; Choi…”
Mathematical Evolution of Origami Structures and Their Applications in Soft Robotics
Ren, T., Chen, Y., Li, Y., Yang, Y., Chen, Y., Yang, S. X., & Li, Y. (2025) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2025.3616407 · Cited by 3
“2f) [39].”
Bistable origami thermal switch with high switching ratios
Tan, B., Lyu, J., Yang, F., Xu, K., Qiao, S., Song, B., Yang, L. T., & Liu, K. (2026) · Nature Communications · doi:10.1038/s41467-026-69956-2 · Cited by 3
Partially activated reconfigurable arrays to guide acoustic waves
Zhao, N., Zou, C., & Harne, R. L. (2021) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x211006906 · Cited by 3
“Although there are flat-foldable origami structures able to realize curved forms (Dudte et al., 2016), the tessellations are not easily held in position in practice due to elastic deformation of the facet surfaces (Schenk and Guest, 2011).”
BackgroundOrigami-inspired systems that improve adult diaper performance to enhance user dignity
Brown, N. C., Pruett, H. T., Bolanos, D. S., Jackson, C., Beatson, B., Magleby, S. P., & Howell, L. L. (2022) · Wearable Technologies · doi:10.1017/wtc.2021.17 · Cited by 3
“Research has been done to demonstrate and explain how origami fold patterns can create doubly curved, saddle-like shapes (Demaine et al., 1999, 2011; Dudte et al., 2016).”
Parametric solutions to the kinematics of developable degree-4 rigid origami vertices
Hu, Y., Zheng, C., Bi, C., & Liang, H. (2023) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2023.0319 · Cited by 4
Zhang, M., & Zhao, Y. F. (2024) · Multimedia Systems · doi:10.1007/s00530-024-01326-8 · Cited by 4
Patil, H. Y., Maki, K. J., & Filipov, E. T. (2024) · Journal of Fluids and Structures · doi:10.1016/j.jfluidstructs.2024.104176 · Cited by 3
Modeling and Computation of the Effective Elastic Behavior of Parallelogram Origami Metamaterials
Xu, H., Marazzato, F., & Plucinsky, P. (2025) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2025.106295 · Cited by 3
“Another intriguing research direction is to study “locally periodic” origami patterns, which are obtained by slowly varying the design parameters of the origami cells and often show an uncanny ability to approximate a rich variety of surfaces on folding [14, 18, 53].”
Shearigami: Self‐Folding via Shear Deformation
Wu, R., Li, L., & Wang, Z. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202300020 · Cited by 3
Zhao, W. J., Ren, X., Wang, B., Jin, C., Duan, W., & Ding, F. (2019) · Physical Review Materials · doi:10.1103/physrevmaterials.3.056001 · Cited by 3
Designing triangle meshes with controlled roughness
Inza, V. C., Fykouras, P., Rist, F., Häseker, D., Hojjat, M., Müller, C., & Pottmann, H. (2024) · ACM Transactions on Graphics · doi:10.1145/3687940 · Cited by 2
Programmable multilayer metasheets: 3D shape-morphing through differential Poisson’s ratio mechanism
Zhang, X., Lu, C., Li, R., Pan, F., & Chen, Y. (2025) · Composite Structures · doi:10.1016/j.compstruct.2025.119304 · Cited by 2
Ultrafast Programming of Large Curvature Based on Selenium‐Sulfur Dynamic Metathesis
Wen, R., Zhang, J., Miao, C., Huang, W., Quan, R., Huang, R., Wu, H., Huang, Z., Tan, Y., & Xu, H. (2026) · Advanced Materials · doi:10.1002/adma.202523642 · Cited by 2
Yellowhorse, A. D., Brown, N. C., & Howell, L. L. (2020) · Journal of Mechanisms and Robotics · doi:10.1115/1.4045936 · Cited by 2
Pei-wen, Z., He, Y., Yang, H., & Yan, X. (2022) · Mathematical Problems in Engineering · doi:10.1155/2022/2324167 · Cited by 2
Group-theoretic analysis of symmetry-preserving deployable structures and metamaterials
Chirikjian, G. S. (2024) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2023.0352 · Cited by 3
Design and Fabrication of String-driven Origami Robots
Yang, P., & Li, S. (2024) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra57147.2024.10610989 · Cited by 5
“Dudte et al. [9] proposed a method for designing Miura patterns according to different Gaussian curvatures and unit densities.”
MethodHu, Y., Lin, L., Zheng, C., & Bi, C. (2025) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2025.113698 · Cited by 3
Nurmatov, A., Скопенков, М. Б., Rist, F., Klein, J., & Michels, D. L. (2026) · Computer-Aided Design · doi:10.1016/j.cad.2026.104102 · Cited by 3
Modular design of curved beam-based recyclable architected materials
Yao, H., Zhao, X., & Mi, S. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e21557 · Cited by 2
“…and the involvement of multiphysics interactions [18 – 21] enrich the unusual mechanical characteristics of architected materials, including their shape-morphing capabilities [1,6,9,10,22,23], compliance characteristics [12 – 14], programmable properties [9,11,17,19], and topologies [18,24 – 27].”
BackgroundGauss Map Based Curved Origami Discretization
Zhang, L., Pang, G., Bai, L., & Ji, T. (2018) · Journal of Mechanisms and Robotics · doi:10.1115/1.4041631 · Cited by 2
Phase transforming auxetic material with embedding magnets
Chen, T., Zhang, X., Yan, X., Zhang, B., Jiang, J., Zhang, S., Guo, C., Huang, D., & Qi, M. (2019) · SPIE Behavior and Mechanics of Multifunctional Materials and Composites · doi:10.1117/12.2513906 · Cited by 2
Metamorphs: Bistable Planar StructuresPreprint
Bharaj, G., Kaufman, D. M., Vouga, E., & Pfister, H. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1804.06996 · Cited by 2
“Origami inspired geometric design also falls in this categories, where rigid origami [20, 43], and pop-design [31] are used to create kinematics of a design.”
MethodSelf-citationThe constrained geometry of structures : optimization methods for inverse form-finding design
Cuvilliers, P. (2020) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 2
Lotus: Testing origami-inspired structures in microgravity
Gallois, A., Mallabadi, K., López, C., Marceau, E., Silva, S., & Lizy-Destrez, S. (2022) · Symposium on Space Educational Activities (SSEA) · doi:10.5821/conference-9788419184405.096 · Cited by 1
Paper-Based Triboelectric Nanogenerators
Yang, J. (2023) · Springer eBooks · doi:10.1007/978-3-031-05722-9_26-1 · Cited by 1
Influence of joint types on rigidity of Chebyshev elastic gridshells: A parametric analysis
Wang, X., & Qiu, X. (2024) · Thin-Walled Structures · doi:10.1016/j.tws.2024.112008 · Cited by 1
Sung, C., & Paik, J. K. (2024) · Springer eBooks · doi:10.1007/978-3-031-68620-7_9 · Cited by 1
Ruling Based Design Method of Curved Origami
Zhang, T., & Kawaguchi, K. (2025) · Japan Architectural Review · doi:10.1002/2475-8876.70034 · Cited by 1
Metadata
- Authors
- Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L.
- Affiliations
- Harvard University (US)
- The University of Tokyo (JP)
- Corresponding author
- Mahadevan, L.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 5
- Pages
- 583-588
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2273175535
- Semantic Scholar
- 474a0f972a1f02097c67324c81e38202fd02863e
- Cited by
- 486
- References
- 24
- Citations by year
- 2026: 36 · 2025: 44 · 2024: 48 · 2023: 60 · 2022: 52 · 2021: 60 · 2020: 51 · 2019: 37 · 2018: 49 · 2017: 37 · 2016: 12
- FWCI
- 39.94
- Type
- journal article
- Language
- en
- Open access
- green
- arxiv.org
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- arXiv (Cornell University)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Analysis and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Keywords
- origami tessellations, curved surfaces, constrained optimization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.