Programming curvature using origami tessellations
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Origami describes rules for creating folded structures from patterns on a flat sheet, but does not prescribe how patterns can be designed to fit target shapes. Here, starting from the simplest periodic origami pattern that yields one-degree-of-freedom collapsible structures-we show that scale-independent elementary geometric constructions and constrained optimization algorithms can be used to determine spatially modulated patterns that yield approximations to given surfaces of constant or varying curvature. Paper models confirm the feasibility of our calculations. We also assess the difficulty of realizing these geometric structures by quantifying the energetic barrier that separates the metastable flat and folded states. Moreover, we characterize the trade-off between the accuracy to which the pattern conforms to the target surface, and the effort associated with creating finer folds. Our approach enables the tailoring of origami patterns to drape complex surfaces independent of absolute scale, as well as the quantification of the energetic and material cost of doing so.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“since vertices with three or fewer edges are completely rigid while vertices with more than four edges are too soft (that is, have multiple continuous degrees of freedom).”
From Self-folding origami at any energy scale (2017) · cites this paper as [11]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bowden, N., Brittain, S., Evans, A. G., Hutchinson, J. W., & Whitesides, G. M. (1998) · Nature · doi:10.1038/30193 · Cited by 2,305 · cited 1×
“It also occurs in many natural settings, including insect wings and leaves ( 4, 5 ), vertebrate guts ( 6 ) and is the result of the spontaneous wrinkling of soft adherent thin elastic films ( 7–9 ).”
BackgroundUsing origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Geometry of Miura-folded metamaterials
Schenk, M., & Guest, S. D. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1217998110 · Cited by 1,009
Blees, M. K., Barnard, A. W., Rose, P. A., Roberts, S. P., McGill, K. L., Huang, P. Y., Ruyack, A. R., Kevek, J. W., Kobrin, B., Muller, D. A., et al. (2015) · Nature · doi:10.1038/nature14588 · Cited by 891 · cited 1×
“1b), and previous origami ( 17–19 ) and kirigami ( 20–22 ) surface approximations, to pose the inverse problem of fitting Miura-like origami tessellations to surfaces with intrinsic curvature.”
BackgroundChen, Y., Peng, R., & You, Z. (2015) · Science · doi:10.1126/science.aab2870 · Cited by 563 · cited 1×
“llations that conform to prescribed surfaces. For generalized cylinders, we have shown that the constructed pattern is rigid-foldable and flat-foldable, and thus can be easily adapted to thick origami (25). For doubly-curved surfaces, our computational tool allows us to calculate physically realizable tessellations whi…”
MethodVillification: How the Gut Gets Its Villi
Shyer, A. E., Tallinen, T., Nerurkar, N. L., Wei, Z., Gil, E. S., Kaplan, D. L., Tabin, C. J., & Mahadevan, L. (2013) · Science · doi:10.1126/science.1238842 · Cited by 562
Self-citationOrigami structures with a critical transition to bistability arising from hidden degrees of freedom
Silverberg, J. L., Na, J.-H., Evans, A. A., Liu, B., Hull, T. C., Santangelo, C. D., Lang, R. J., Hayward, R. C., & Cohen, I. (2015) · Nature Materials · doi:10.1038/nmat4232 · Cited by 492
Geometric Folding Algorithms: Linkages, Origami, Polyhedra
Demaine, E. D., & O’Rourke, J. (2007) · Cited by 409
Geometric Mechanics of Periodic Pleated Origami
Wei, Z. Y., Guo, Z. V., Dudte, L., Liang, H. Y., & Mahadevan, L. (2013) · Physical Review Letters · doi:10.1103/physrevlett.110.215501 · Cited by 409 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
BackgroundSelf-citationOrigami Multistability: From Single Vertices to Metasheets
Waitukaitis, S., Menaut, R., Chen, B. G.-G., & van Hecke, M. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.055503 · Cited by 326 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
Background
Research works printed but not linked: 2
- Tachi, T. Hangai prize papers for 2009: generalization of rigid-foldable quadrilateral-mesh origami. J. IASS 50, 173–179 (2009).
- Kawasaki, T. Proc. 1st Int. Meeting Origami Sci. Technol. (ed. Huzita, H.) 229–237 (1989).
Cited by
Items 101–200 of 481
On elastic geodesic grids and their planar to spatial deployment
Pillwein, S., Leimer, K., Birsak, M., & Musialski, P. (2020) · ACM Transactions on Graphics · doi:10.1145/3386569.3392490 · Cited by 58
“One more way to easily construct spatial shapes from flat sheets is by appropriately folding paper [Massarwi et al. 2007; Mitani and Suzuki 2004], which is inherently related to the Japanese art of Origami [Dudte et al. 2016].”
BackgroundMethodDesign of composite structures with programmable elastic responses under finite deformations
Li, W., Wang, F., Sigmund, O., & Zhang, X. S. (2021) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2021.104356 · Cited by 57
Nassar, H., Lebée, A., & Monasse, L. (2017) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2016.0705 · Cited by 62
Self-folding origami at any energy scale
Pinson, M. B., Stern, M., Carruthers Ferrero, A., Witten, T. A., Chen, E., & Murugan, A. (2017) · Nature Communications · doi:10.1038/ncomms15477 · Cited by 56
Current Development on Origami/Kirigami‐Inspired Structure of Creased Patterns toward Robotics
Ai, C., Chen, Y., Xu, L., Li, H., Liu, C., Shang, F., Xia, Q., & Zhang, S. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100473 · Cited by 57
Multi‐Stability of the Extensible Origami Structures
Xi, K., Chai, S., Ma, J., & Chen, Y. (2023) · Advanced Science · doi:10.1002/advs.202303454 · Cited by 56
Mechanical Properties Inside Origami-Inspired Structures: An Overview
Peng, Y., Huang, H., Meloni, M., Li, B., & Cai, J. (2024) · Applied Mechanics Reviews · doi:10.1115/1.4066566 · Cited by 70
Mechanically‐Guided 4D Printing of Magnetoresponsive Soft Materials across Different Length Scale
Zhu, H., He, Y., Wang, Y., Zhao, Y., & Jiang, C. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202100137 · Cited by 57
Origami-inspired thin-film shape memory alloy devices
Velvaluri, P., Soor, A., Plucinsky, P., de Miranda, R. L., James, R. D., & Quandt, E. (2021) · Scientific Reports · doi:10.1038/s41598-021-90217-3 · Cited by 55
Curvature Induced by Deflection in Thick Meta‐Plates
Mirzaali, M. J., Ghorbani, A., Nakatani, K., Nouri‐Goushki, M., Tümer, N., Callens, S. J. P., Janbaz, S., Accardo, A., Bico, J., Habibi, M., et al. (2021) · Advanced Materials · doi:10.1002/adma.202008082 · Cited by 57
Programming mechanical metamaterials using origami tessellations
He, Y., Zhang, P. W., You, Z., Li, Z. Q., Wang, Z., & Shu, X. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108015 · Cited by 60
Feng, F., Plucinsky, P., & James, R. D. (2020) · Physical review. E · doi:10.1103/physreve.101.033002 · Cited by 55
“[20] L.”
BackgroundMethodDecoupling local mechanics from large-scale structure in modular metamaterials
Yang, N., & Silverberg, J. L. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1620714114 · Cited by 54
Shape-morphing mechanical metamaterials
Jiang, C., Rist, F., Wang, H., Wallner, J., & Pottmann, H. (2021) · Computer-Aided Design · doi:10.1016/j.cad.2021.103146 · Cited by 55
Intelligent computational design of scalene-faceted flat-foldable tessellations
Chen, Y., Lu, C., Yan, J., Feng, J., & Sareh, P. (2022) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwac082 · Cited by 57
Vertical serpentine interconnect-enabled stretchable and curved electronics
Jiao, R., Wang, R., Wang, Y., Cheung, Y. K., Chen, X., Wang, X., Deng, Y., & Yu, H. (2023) · Microsystems & Nanoengineering · doi:10.1038/s41378-023-00625-w · Cited by 62
“Notably, origami tes-sellation can also be applied to achieve stretchable and curved electronics 47 – 50 as a structure-enabled curved device.”
MethodControllable curvature from planar polymer sheets in response to light
Hubbard, A. M., Mailen, R. W., Zikry, M. A., Dickey, M. D., & Genzer, J. (2017) · Soft Matter · doi:10.1039/c7sm00088j · Cited by 55
Metamaterials: The Art in Materials Science
Sun, J., & Zhou, J. P. (2024) · Engineering · doi:10.1016/j.eng.2024.12.011 · Cited by 61
Guiding Cell Network Assembly using Shape‐Morphing Hydrogels
Viola, J. M., Porter, C. M., Gupta, A., Long, M. A., Prahl, L. S., & Hughes, A. J. (2020) · Advanced Materials · doi:10.1002/adma.202002195 · Cited by 50
Programmable mechanical metamaterials: basic concepts, types, construction strategies—a review
Liu, C., Zhang, X., Chang, J., Lyu, Y., Zhao, J., & Qiu, S. (2024) · Frontiers in Materials · doi:10.3389/fmats.2024.1361408 · Cited by 62
An additive algorithm for origami design
Dudte, L. H., Choi, G. P. T., & Mahadevan, L. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2019241118 · Cited by 56
“In contrast with previous work (32), our additive approach does not require the solution of a large multidimensional optimization problem for the entire structure.”
BackgroundSelf-citationContinuum Field Theory for the Deformations of Planar Kirigami
Zheng, Y. L., Niloy, I., Celli, P., Tobasco, I., & Plucinsky, P. (2022) · Physical Review Letters · doi:10.1103/physrevlett.128.208003 · Cited by 48
Xiao, K., Liang, Z., Zou, B., Zhou, X., & Ju, J. (2022) · Nature Communications · doi:10.1038/s41467-022-35224-2 · Cited by 52
Programmable mechanical metamaterials with tunable Poisson's ratio and morphable stiffness
Gao, Y., Kang, X., & Li, B. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.112089 · Cited by 48
Sharma, A., Naskar, S., & Mukhopadhyay, T. (2025) · Advanced Science · doi:10.1002/advs.202505089 · Cited by 58
Humidity-responsive actuators from integrating liquid crystal networks in an orienting scaffold
Ryabchun, A., Lancia, F., Nguindjel, A. C., & Katsonis, N. (2017) · Soft Matter · doi:10.1039/c7sm01505d · Cited by 47
Three-Dimensional Silicon Electronic Systems Fabricated by Compressive Buckling Process
Kim, B. H., Lee, J., Won, S. M., Xie, Z., Chang, J., Yu, Y., Cho, Y. K., Jang, H., Jeong, J. Y., Lee, Y., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b00180 · Cited by 49
Hydrogel-driven origami metamaterials for tunable swelling behavior
Chen, Z., Li, Y., & Li, Q. M. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109819 · Cited by 49
Heterogeneous origami-architected materials with variable stiffness
Miyazawa, Y., Yasuda, H., Kim, H., Lynch, J. H., Tsujikawa, K., Kunimine, T., Raney, J. R., & Yang, J. (2021) · Communications Materials · doi:10.1038/s43246-021-00212-4 · Cited by 51
3D and 4D Printing of Multistable Structures
Jeong, H. Y., An, S., Lim, Y., Jeong, M. J., Kim, N., & Jun, Y. C. (2020) · Applied Sciences · doi:10.3390/app10207254 · Cited by 49
“Bistability can be realized, for example, in strained bilayers and origami-based structures (Figure 4c) [37,38].”
BackgroundOrigami-Based Metamaterials for Dynamic Control of Wide-Angle Absorption in a Reconfigurable Manner
Zhu, Z., Wang, H., Li, Y., Meng, Y., Wang, W., Zheng, L., Wang, J., Zhang, J., & Qu, S. (2022) · IEEE Transactions on Antennas and Propagation · doi:10.1109/tap.2022.3140521 · Cited by 46
“In addition, considering the scalability of origami and its applicability to engineering deployable or foldable structures [44], the concept demonstrated can be extended to shorter wavelengths, such as terahertz frequencies.”
BackgroundDang, X., Lu, L., Duan, H., & Wang, J. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107615 · Cited by 45
Mechanical metamaterial systems as transformation mechanisms
Rodríguez, S. E., Calius, E. P., Khatibi, A. A., Orifici, A. C., & Das, R. K. (2023) · Extreme Mechanics Letters · doi:10.1016/j.eml.2023.101985 · Cited by 47
Soft Scalable Crawling Robots Enabled by Programmable Origami and Electrostatic Adhesion
Hu, Q., Li, J., Dong, E., & Sun, D. B. (2023) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2023.3251181 · Cited by 45
“Moreover, various inverse design approaches [29], [30], [31], including a design model that we proposed [32], [33], were developed to solve the crease pattern of a targeted origami, further making it easy to use the origami structures in robot design.”
MethodBig influence of small random imperfections in origami-based metamaterials
Liu, K., Novelino, L. S., Gardoni, P., & Paulino, G. H. (2020) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2020.0236 · Cited by 48
“[20] that the flatfoldability residual (defined similarly to the Kawasaki excess) enables energy barrier between two configurations during form-find of curved Miura patterns.”
BackgroundAlgorithmic design of origami mechanisms and tessellations
Walker, A., & Stanković, T. (2022) · Communications Materials · doi:10.1038/s43246-022-00227-5 · Cited by 49
Shape-morphing into 3D curved surfaces with nacre-like composite architectures
Jin, L., Yeager, M., Lee, Y.-J., O’Brien, D. J., & Yang, S. M. (2022) · Science Advances · doi:10.1126/sciadv.abq3248 · Cited by 46
Adaptive hierarchical origami-based metastructures
Li, Y., Lallo, A. D., Zhu, J., Chi, Y., Su, H., & Yin, J. (2024) · Nature Communications · doi:10.1038/s41467-024-50497-5 · Cited by 54
“This limitation simpli fi es actuation and deployment but sacri fi ces the potential for achieving a variety of shapes 12,13,16,18,22,38,40,43 .”
InfluentialStiffness Preprogrammable Soft Bending Pneumatic Actuators for High-Efficient, Conformal Operation
Ke, X., Jang, J., Chai, Z., Yong, H., Zhu, J., Chen, H., Guo, C. F., Ding, H., & Wu, Z. (2021) · Soft Robotics · doi:10.1089/soro.2020.0207 · Cited by 48
3D weaving with curved ribbons
Ren, Y., Panetta, J., Chen, T., Isvoranu, F., Poincloux, S., Brandt, C., Martin, A., & Pauly, M. V. (2021) · ACM Transactions on Graphics · doi:10.1145/3450626.3459788 · Cited by 44
Park, O., Tiwary, C. S., Yang, Y., Bhowmick, S., Vinod, S., Zhang, Q., Colvin, V. L., Asif, S. A. S., Vajtai, R., Penev, E. S., et al. (2017) · Nanoscale · doi:10.1039/c7nr01054k · Cited by 43
A Deployable Quasi-Yagi Monopole Antenna Using Three Origami Magic Spiral Cubes
Shah, S. I. H., Tentzeris, M. M., & Lim, S. (2018) · IEEE Antennas and Wireless Propagation Letters · doi:10.1109/lawp.2018.2883380 · Cited by 43
“2883380 self-foldability [4], programmable collapse [5], and programmable curvature [6].”
BackgroundDiscrete geodesic parallel coordinates
Wang, H., Pellis, D., Rist, F., Pottmann, H., & Müller, C. (2019) · ACM Transactions on Graphics · doi:10.1145/3355089.3356541 · Cited by 51
Shape morphing of plastic films
Zhang, F., Li, D., Wang, C., Liu, Z., Yang, M., Cui, Z., Yi, J., Wang, M., Jiang, Y., Lv, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-34844-y · Cited by 45
An additive framework for kirigami design
Dudte, L. H., Choi, G. P. T., Becker, K. P., & Mahadevan, L. (2023) · Nature Computational Science · doi:10.1038/s43588-023-00448-9 · Cited by 50
“In recent work, we showed that the use of local marching rules allows for an additive origami design approach [21], converting a difficult non-convex global optimization problem [22] into a simpler, but still nonlinear, local problem.”
MethodSelf-citationOrigami-based Building Blocks for Modular Construction of Foldable Structures
Mousanezhad, D., Kamrava, S., & Vaziri, A. (2017) · Scientific Reports · doi:10.1038/s41598-017-13654-z · Cited by 47
3D kirigami metamaterials with coded thermal expansion properties
Yang, N., Zhang, M., & Zhu, R. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.100912 · Cited by 43
“…reveals that the art for paper cutting/folding can also efficiently guide the microstructure designs of artificial metamaterials with peculiar macroscopic mechanical properties, such as negative Poisson’s ratio [23–25], negative stiffness [26], adjustable curvature [27] and multista-bility [28,29].”
BackgroundDesign of deployable circular structures based on Miura origami pattern
Wang, S., Wu, J., Yan, P., Huang, H., Li, B., & Liu, R. (2023) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2023.105350 · Cited by 41
Morphing Origami Block for Lightweight Reconfigurable System
Kim, S., Lee, D., Ahn, S., Koh, J., & Cho, K. (2020) · IEEE Transactions on Robotics · doi:10.1109/tro.2020.3031248 · Cited by 45
“proposed for implementing programmability, such as universal self-folding sheets [23], [24], mechanical metamaterials [25]– [29], Snapology [30], tessellation [31], lattice kirigamis [32],”
MethodTOMITA, S., Shimanuki, K., NISHIGAKI, H., Oyama, S., Sasagawa, T., Murai, D., & Umemoto, K. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111497 · Cited by 40
A folding analysis method for origami based on the frame with kinematic indeterminacy
Zhang, T., Kawaguchi, K., & Wu, M. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.07.036 · Cited by 40
Local mechanical description of an elastic fold
Jules, T., Lechenault, F., & Adda-Bedia, M. (2019) · Soft Matter · doi:10.1039/c8sm01791c · Cited by 40
Mechanics of bistable cross-shaped structures through loading-path controlled 3D assembly
Luo, G., Fu, H., Cheng, X., Bai, K., Shi, L., He, X., Rogers, J. A., Huang, Y. Y., & Zhang, Y. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2019.05.007 · Cited by 41
Paper-based triboelectric nanogenerators and their applications: a review
Han, J., Xu, N., Liang, Y., Ding, M., Zhai, J., Sun, Q., & Wang, Z. L. (2021) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.12.12 · Cited by 42
Shaping the topology of folding pathways in mechanical systems
Stern, M., Jayaram, V., & Murugan, A. (2018) · Nature Communications · doi:10.1038/s41467-018-06720-1 · Cited by 38
Jiang, C., Mundilova, K., Rist, F., Wallner, J., & Pottmann, H. (2019) · ACM Transactions on Graphics · doi:10.1145/3355089.3356540 · Cited by 38
Quasi-static in-plane compression of zig-zag folded metamaterials at large plastic strains
Zhang, J., Karagiozova, D., Lu, G., & Chen, P. (2020) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107285 · Cited by 38
Patterning Curved Three-Dimensional Structures With Programmable Kirigami Designs
Wang, F., Guo, X., Xu, J., Zhang, Y., & Chen, C. (2017) · Journal of Applied Mechanics · doi:10.1115/1.4036476 · Cited by 38
Design of rigid-foldable doubly curved origami tessellations based on trapezoidal crease patterns
Song, K., Zhou, X., Zang, S., Wang, H., & You, Z. (2017) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2017.0016 · Cited by 38
“2013) to medical stents (Kuribayashi et al. 2006), foldable electronic devices (Song et al. 2014; Tang et al. 2014; Zhang et al. 2015), lightweight sandwich folded cores (Heimbs 2013) and mechanical metamaterials (Schenk & Guest 2013; Wei et al. 2013; Silverberg et al. 2014; Waitukaitis et al. 2015; Zhou et al. 2016).…”
BackgroundMethodInfluentialPaper Origami‐Inspired Design and Actuation of DNA Nanomachines with Complex Motions
Zhou, L., Marras, A. E., Huang, C., Castro, C. E., & Su, H. (2018) · Small · doi:10.1002/smll.201802580 · Cited by 38
Suto, K., Noma, Y., Tanimichi, K., Narumi, K., & Tachi, T. (2022) · ACM Transactions on Computer-Human Interaction · doi:10.1145/3576856 · Cited by 41
“Other methods approximate arbitrary surfaces using origami tessellations while solving the developability of the tessellations and itting them to the target surfaces through optimization approaches [14, 19, 51, 58].”
MethodSelf-citationEncoding kirigami bi-materials to morph on target in response to temperature
Liu, L., Qiao, C., An, H., & Pasini, D. (2019) · Scientific Reports · doi:10.1038/s41598-019-56118-2 · Cited by 38
The complexity of folding self-folding origami
Stern, M., Pinson, M. B., & Murugan, A. (2017) · University of Chicago · doi:10.6082/a3pjx-f9q82 · Cited by 35
Bioinspired, Shape-Morphing Scale Battery for Untethered Soft Robots
Kim, M., Nam, S., Oh, M., Lee, H.-J., Jang, B., & Hyun, S. (2021) · Soft Robotics · doi:10.1089/soro.2020.0175 · Cited by 39
“20,32 We assumed the cells are arranged in an FIG.”
Reconfigurable origami silencers for tunable and programmable sound attenuation
Fang, H., Yu, X., & Li, C. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aad0b6 · Cited by 38
Waitukaitis, S., Dieleman, P., & van Hecke, M. (2020) · Physical review. E · doi:10.1103/physreve.102.031001 · Cited by 37
“The exceptional geometrical, shape-shifting and mechanical functionalities of these systems ultimate spring from the nonlinear folding motions of the building blocks of origami [1–14, 19–26, 28–30].”
BackgroundAnisotropic Morphing in Bistable Kirigami through Symmetry Breaking and Geometric Frustration
Qiao, C., Agnelli, F., Pokkalla, D. K., D'Ambrosio, N., & Pasini, D. (2024) · Advanced Materials · doi:10.1002/adma.202313198 · Cited by 37
Carbon origami: A method to fabricate lightweight carbon cellular materials
Islam, M., Flach, J. P., & Martínez‐Duarte, R. (2018) · Carbon · doi:10.1016/j.carbon.2018.03.033 · Cited by 36
Origami microfluidics for radiant cooling with small temperature differences in buildings
Grinham, J., Craig, S., Ingber, D. E., & Bechthold, M. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115610 · Cited by 35
Li, Y., & Yin, J. (2021) · Materials Today Physics · doi:10.1016/j.mtphys.2021.100511 · Cited by 34
Generalized deployable elastic geodesic grids
Pillwein, S., & Musialski, P. (2021) · ACM Transactions on Graphics · doi:10.1145/3478513.3480516 · Cited by 34
Engineering Stress in Thin Films: An Innovative Pathway Toward 3D Micro and Nanosystems
Truong, T., Nguyen, T., Zhao, H., Nguyen, N., Dinh, T., Park, Y., Nguyen, T., Yamauchi, Y., Nguyen, N., & Phan, H. (2021) · Small · doi:10.1002/smll.202105748 · Cited by 37
Mechanics of paper-folded origami: A cautionary tale
Grey, S., Scarpa, F. L., & Schenk, M. (2020) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2020.103540 · Cited by 35
Harnessing architected stiffeners to manufacture origami-inspired foldable composite structures
AlMansoori, M., Khan, K. A., & Cantwell, W. J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108449 · Cited by 33
Liu, Z., Fang, H., Xu, J., & Wang, K. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/ac0d0f · Cited by 35
A mechanically robust and facile shape morphing using tensile-induced buckling
An, S., Cao, Y., & Jiang, H. (2024) · Science Advances · doi:10.1126/sciadv.ado8431 · Cited by 33
Approximating 3D surfaces using generalized waterbomb tessellations
Zhao, Y. F., Endo, Y., Kanamori, Y., & Mitani, J. (2018) · Journal of Computational Design and Engineering · doi:10.1016/j.jcde.2018.01.002 · Cited by 32
“In addition, several approximating approaches based on modi-fied Miura-ori have been proposed.”
MethodInfluentialOrigami Robots: Design, Actuation, and 3D Printing Methods
Xue, W., Jian, B., Jin, L., Wang, R., & Ge, Q. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202500278 · Cited by 34
Rigidity of hemispherical elastic gridshells under point load indentation
Baek, C., & Reis, P. M. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.11.002 · Cited by 37
Origami-inspired structures with programmable multi-step deformation
Wang, H., He, Y., Yu, A., Li, X., Gu, M., Ling, X., & Chen, G. (2022) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2022.2133197 · Cited by 31
“For example, the deployable curved surfaces [22 – 25] and origami-base cylindrical structures [26 – 28] have been created based on crease pattern design methods.”
MethodKresling tube metamaterial exhibits extreme large-displacement buckling behavior
Turco, E., Barchiesi, E., Causin, A., dell’Isola, F., & Solci, M. (2023) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2023.104202 · Cited by 31
Design of Pseudo-Mechanisms and Multistable Units for Mechanical Metamaterials
Singh, N. K., & van Hecke, M. (2021) · Physical Review Letters · doi:10.1103/physrevlett.126.248002 · Cited by 30
Folding analysis for thick origami with kinematic frame models concerning gravity
Zhang, T., & Kawaguchi, K. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103691 · Cited by 30
Wu, R., Roberts, P. C. E., Soutis, C., & Diver, C. (2018) · Acta Astronautica · doi:10.1016/j.actaastro.2018.08.012 · Cited by 30
“Origami provides a method to convert a 2D sheet such as a solar sail into a 3D device with programmable properties and even built-in functionalities, thus is widely regarded as a building block for meta-materials [20, 21, 22, 23, 24].”
MethodDynamic unfolding process of origami tessellations
Dong, S., Zhao, X., & Yu, Y. (2021) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2021.111075 · Cited by 29
Dong, S., & Yu, Y. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2021.112840 · Cited by 29
Yellowhorse, A. D., Lang, R. J., Tolman, K. A., & Howell, L. L. (2018) · Scientific Reports · doi:10.1038/s41598-018-31180-4 · Cited by 29
Design of Cylindrical and Axisymmetric Origami Structures Based on Generalized Miura-Ori Cell
Hu, Y., Liang, H., & Duan, H. (2019) · Journal of Mechanisms and Robotics · doi:10.1115/1.4043800 · Cited by 29
Design of Single Degree-of-Freedom Triangular Resch Patterns with Thick-panel Origami
Yang, F., Zhang, M., Ma, J., You, Z., Yu, Y., Chen, Y., & Paulino, G. H. (2021) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2021.104650 · Cited by 28
“Furthermore, since the zerothickness Resch pattern has multi-DOFs, it can realize a variety of curved surfaces more flexibly than that constructed with the Miuraori [25].”
BackgroundHuang, L., Zeng, P., Yin, L., Liu, B., Yang, Y., & Huang, J. (2022) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2022.104886 · Cited by 29
Turco, E., Barchiesi, E., & dell’Isola, F. (2022) · Zeitschrift für angewandte Mathematik und Physik · doi:10.1007/s00033-022-01917-3 · Cited by 28
Shah, S. I. H., & Lim, S. (2019) · IEEE Antennas and Wireless Propagation Letters · doi:10.1109/lawp.2019.2928333 · Cited by 27
“Origami techniques are generating considerable research attention due to various interesting characteristics, such as self-foldability, multistability, programmable curvature, and programmable collapse [1].”
BackgroundDevelopment of kinetic origami canopy using Arc Miura folding patterns
Zhang, Q., Wang, X., Lee, D. S., Cai, J., Ren, Z., & Feng, J. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103116 · Cited by 27
Curved display based on programming origami tessellations
Deng, Y., Liu, W., Cheung, Y. K., Li, Y., Hong, W., & Yu, H. (2021) · Microsystems & Nanoengineering · doi:10.1038/s41378-021-00319-1 · Cited by 27
“As a general curved surface (especially one with positive Gauss curvature 34 ) may not be rigidly folded from a Miura-like tessellation, we turn to the minimization of the total elastic energy of all facets when forced to deform into the desired shape.”
BackgroundMethodPlasticity and aging of folded elastic sheets
Jules, T., Lechenault, F., & Adda-Bedia, M. (2020) · Physical review. E · doi:10.1103/physreve.102.033005 · Cited by 26
Strain compatibility and gradient elasticity in morphing origami metamaterials
Nassar, H., Lebée, A., & Werner, E. (2022) · Extreme Mechanics Letters · doi:10.1016/j.eml.2022.101722 · Cited by 26
Theorem for the design of deployable kirigami tessellations with different topologies
Dang, X., Feng, F., Duan, H., & Wang, J. (2021) · Physical review. E · doi:10.1103/physreve.104.055006 · Cited by 25
Programming curvatures by unfolding of the triangular Resch pattern
Yu, Y., Chen, Y., & Paulino, G. H. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107861 · Cited by 29
“Dudte et al. [28] developed a generalized optimization al-gorithm to solve the inverse problem of fitting an intrinsically curved surface with the Miura pattern.”
BackgroundConstructing Rigid-Foldable Generalized Miura-Ori Tessellations for Curved Surfaces
Hu, Y., Zhou, Y., & Liang, H. (2020) · Journal of Mechanisms and Robotics · doi:10.1115/1.4048630 · Cited by 26
“Compared with the construction process in the reference [22], the current construction suits for a large class of parametric surfaces and avoids the process of merging vertexes shared by adjacent cells.”
BackgroundInfluentialReprogrammable Kinematic Branches in Tessellated Origami Structures
Pratapa, P. P., Liu, K., Vasudevan, S. P., & Paulino, G. H. (2021) · Journal of Mechanisms and Robotics · doi:10.1115/1.4049949 · Cited by 26
Metadata
- Authors
- Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L.
- Affiliations
- Harvard University (US)
- The University of Tokyo (JP)
- Corresponding author
- Mahadevan, L.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 5
- Pages
- 583-588
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2273175535
- Semantic Scholar
- 474a0f972a1f02097c67324c81e38202fd02863e
- Cited by
- 486
- References
- 24
- Citations by year
- 2026: 36 · 2025: 44 · 2024: 48 · 2023: 60 · 2022: 52 · 2021: 60 · 2020: 51 · 2019: 37 · 2018: 49 · 2017: 37 · 2016: 12
- FWCI
- 39.94
- Type
- journal article
- Language
- en
- Open access
- green
- arxiv.org
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- arXiv (Cornell University)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Analysis and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Keywords
- origami tessellations, curved surfaces, constrained optimization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.