Programming curvature using origami tessellations
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Origami describes rules for creating folded structures from patterns on a flat sheet, but does not prescribe how patterns can be designed to fit target shapes. Here, starting from the simplest periodic origami pattern that yields one-degree-of-freedom collapsible structures-we show that scale-independent elementary geometric constructions and constrained optimization algorithms can be used to determine spatially modulated patterns that yield approximations to given surfaces of constant or varying curvature. Paper models confirm the feasibility of our calculations. We also assess the difficulty of realizing these geometric structures by quantifying the energetic barrier that separates the metastable flat and folded states. Moreover, we characterize the trade-off between the accuracy to which the pattern conforms to the target surface, and the effort associated with creating finer folds. Our approach enables the tailoring of origami patterns to drape complex surfaces independent of absolute scale, as well as the quantification of the energetic and material cost of doing so.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“since vertices with three or fewer edges are completely rigid while vertices with more than four edges are too soft (that is, have multiple continuous degrees of freedom).”
From Self-folding origami at any energy scale (2017) · cites this paper as [11]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bowden, N., Brittain, S., Evans, A. G., Hutchinson, J. W., & Whitesides, G. M. (1998) · Nature · doi:10.1038/30193 · Cited by 2,305 · cited 1×
“It also occurs in many natural settings, including insect wings and leaves ( 4, 5 ), vertebrate guts ( 6 ) and is the result of the spontaneous wrinkling of soft adherent thin elastic films ( 7–9 ).”
BackgroundUsing origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Geometry of Miura-folded metamaterials
Schenk, M., & Guest, S. D. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1217998110 · Cited by 1,009
Blees, M. K., Barnard, A. W., Rose, P. A., Roberts, S. P., McGill, K. L., Huang, P. Y., Ruyack, A. R., Kevek, J. W., Kobrin, B., Muller, D. A., et al. (2015) · Nature · doi:10.1038/nature14588 · Cited by 891 · cited 1×
“1b), and previous origami ( 17–19 ) and kirigami ( 20–22 ) surface approximations, to pose the inverse problem of fitting Miura-like origami tessellations to surfaces with intrinsic curvature.”
BackgroundChen, Y., Peng, R., & You, Z. (2015) · Science · doi:10.1126/science.aab2870 · Cited by 563 · cited 1×
“llations that conform to prescribed surfaces. For generalized cylinders, we have shown that the constructed pattern is rigid-foldable and flat-foldable, and thus can be easily adapted to thick origami (25). For doubly-curved surfaces, our computational tool allows us to calculate physically realizable tessellations whi…”
MethodVillification: How the Gut Gets Its Villi
Shyer, A. E., Tallinen, T., Nerurkar, N. L., Wei, Z., Gil, E. S., Kaplan, D. L., Tabin, C. J., & Mahadevan, L. (2013) · Science · doi:10.1126/science.1238842 · Cited by 562
Self-citationOrigami structures with a critical transition to bistability arising from hidden degrees of freedom
Silverberg, J. L., Na, J.-H., Evans, A. A., Liu, B., Hull, T. C., Santangelo, C. D., Lang, R. J., Hayward, R. C., & Cohen, I. (2015) · Nature Materials · doi:10.1038/nmat4232 · Cited by 492
Geometric Folding Algorithms: Linkages, Origami, Polyhedra
Demaine, E. D., & O’Rourke, J. (2007) · Cited by 409
Geometric Mechanics of Periodic Pleated Origami
Wei, Z. Y., Guo, Z. V., Dudte, L., Liang, H. Y., & Mahadevan, L. (2013) · Physical Review Letters · doi:10.1103/physrevlett.110.215501 · Cited by 409 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
BackgroundSelf-citationOrigami Multistability: From Single Vertices to Metasheets
Waitukaitis, S., Menaut, R., Chen, B. G.-G., & van Hecke, M. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.055503 · Cited by 326 · cited 2×
“We build on our collective understanding of the geometry of Miura-ori ( 15 ), mechanics of origami ( 10–14 ), existing explorations of the link between fold pattern and geometry ( 16 ) (Fig.”
Background
Research works printed but not linked: 2
- Tachi, T. Hangai prize papers for 2009: generalization of rigid-foldable quadrilateral-mesh origami. J. IASS 50, 173–179 (2009).
- Kawasaki, T. Proc. 1st Int. Meeting Origami Sci. Technol. (ed. Huzita, H.) 229–237 (1989).
Cited by
Items 401–481 of 481
Fold‐Cut Structures with Tunable Stiffness for Multimorphing Soft Robots
Lee, G., & Kim, H. (2025) · Advanced Intelligent Systems · doi:10.1002/aisy.202500229 · Cited by 1
Rigid-foldable tapered origami patterns derived from type III Bricard octahedra
Hu, Y., & Luo, Y. (2025) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2025.106325 · Cited by 1
Designing inflatable shells using unstructured meshes
He, S., Lebée, A., & Skouras, M. (2026) · Computer Graphics Forum · doi:10.1111/cgf.70350 · Cited by 1
Diffusion behavior of local motion in Miura origami structures
Zhang, Q., Meloni, M., Feng, J., & Cai, J. (2026) · Communications in Nonlinear Science and Numerical Simulation · doi:10.1016/j.cnsns.2026.110205 · Cited by 2
From Folding Mechanics to Robotic Function: A Unified Modeling Framework for Compliant Origami
Zhang, B., Wang, B., Ouyang, H., Wu, Z., Bi, H., Xu, J., Liu, M., & Huang, W. (2026) · Advanced Science · doi:10.1002/advs.76715 · Cited by 2
An Algorithm of Rigid Foldable Tessellation Origami to Adapt to Free-Form Surfaces
Tung, H.-C., & Hsu, P.-H. (2019) · Proceedings of the International Conference on Computer-Aided Architectural Design Research in Asia · doi:10.52842/conf.caadria.2019.1.311 · Cited by 1
ORIGAMI ANTENNA DESIGN, DEVELOPMENT, CHALLENGES, AND APPLICATIONS: A THOROUGH REVIEW
Biswas, B., Karmakar, A., & Singh, K. (2025) · Telecommunications and Radio Engineering · doi:10.1615/telecomradeng.2025055154 · Cited by 1
Optimal face-to-face coupling for fast self-folding kirigami
Bambic, M. P., Araújo, N. A. M., Walker, B. J., Hewitt, D. R., Pei, Q., Ni, R., & Volpe, G. (2024) · Soft Matter · doi:10.1039/d3sm01474f · Cited by 1
A Truss-Supported Doubly-Curved Deployable Reflector Based on the Miura-Ori Pattern
Wang, T., & Santer, M. (2024) · AIAA SciTech Forum · doi:10.2514/6.2024-2256 · Cited by 1
Concentrated Gaussian curvature in curved creases of actuated spiral nematic solidsPreprint
Feng, F., Duffy, D., Biggins, J. S., & Warner, M. (2021) · arXiv (Cornell University) · Cited by 1
Géométrie et Mécanique des Origamis
Jules, T. (2020) · theses.fr (ABES) · doi:10.70675/feeb1c7az1db5z4424z91f4zb51517e6c387 · Cited by 3
Oxide Single-Crystal Surfaces: A Playground for Self-assembled Oxide Nanostructures
Bachelet, R. (2016) · Frontiers in Physics · doi:10.3389/fphy.2016.00036
A wavy auxetic surface and the prediction model inspired by Miura-ori
Yu, L., Tan, H., Ma, T., Wang, C., & Zhou, Z. (2016) · International Conference Mechatronics and Control Engineering · doi:10.1145/3036932.3036933
Directive and focused acoustic wave radiation by tessellated transducers with folded curvatures
Harne, R. L., Lynd, D. T., Zou, C., & Crump, J. (2017) · The Journal of the Acoustical Society of America · doi:10.1121/1.4987894
Origami-based structures with programmable properties
Kamrava, S. (2017) · Digital Repository Service (Northeastern University) · doi:10.17760/d20255360 · Cited by 1
Shape Patterns in Digital Fabrication: A Survey on Negative Poisson’s Ratio Metamaterials
Yılmaz, B., Adanova, V., Acar, R., & Tari, S. Z. (2018) · Association for Women in Mathematics series · doi:10.1007/978-3-319-77066-6_10
Gauss Map Based Developable Surface Discretization
Liping, Z., & Yan-ping, P. (2020) · Journal of Mechanical Engineering · doi:10.3901/jme.2020.05.226
“…讨论了与 折纸中曲线折叠有关的一些基本结果,部分理论可 以从微分几何的概念和理论中导出。 KILIAN 等 [10] 利用平面四边形网格 (PQ-meshes) 对曲面折叠进行建 模,并部署了一种基于优化的方法。 KERGOSIEN 等 [11] 采用工程方法对折纸进行了早期的模拟。从一 般曲线出发,它们能够拟合可展曲面。在文献 [12] 中, 基于理想的三维柱面提出了一种二维 Miura-ori 嵌入 的平面设计方法。 TACHI [13] 通过组装弯曲折叠的薄 板,设计了一个可展开的单元管状结构。通过对刚 性折纸结构的细化,得到了曲面的单自由度机构。 DUDTE 等 [14] (1)”
Architected kirigami metamorphosisPreprint
Li, Y., & Yin, J. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2103.15763 · Cited by 1
“Quantitatively, the dihedral angle relations of the base unit during transition Mode 3 can be analytically determined based on the closed loop mechanism of ∑ Tij = I 8 i=1 (33) with the results shown in Fig.”
BackgroundResultNumerical Impact Analysis of Folding-Induced Tubular Thin-walled Energy-dissipating Elements
Ruocco, E., Giovenale, A., & Giacinto, D. D. (2021) · Journal of the International Association for Shell and Spatial Structures · doi:10.20898/j.iass.2021.013
Bös, F. (2018) · doi:10.53846/goediss-6849
Conforming Nanoparticle Sheets to Surfaces with Gaussian Curvature
Mitchell, N. (2020) · Springer theses · doi:10.1007/978-3-030-36361-1_3
Liu, P., Mao, W., Yin, Y., Gan, Z., Zhao, D., & Hu, N. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200148
APPROXIMATION OF CURVED SURFACE BY RIGID ORIGAMI WITH CUTTING LINES
Hayakawa, K., MARUYAMA, Y., Adachi, A., & Ohsaki, M. (2022) · Journal of Architecture and Planning (Transactions of AIJ) · doi:10.3130/aija.87.2288
Materials with a twist : Shear-induced instabilities in metamaterials
Ghorbani, A. (2023) · doi:10.18174/581216 · Cited by 1
Perspectives of 3D and 4D bioprinting
Neagu, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-818653-4.00003-6
Memory capacity of flow network morphology
Bhattacharyya, K. (2023) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-9722
Li, Y., Wang, B., Li, Z. Q., & Xin, L. (2023) · Research Square · doi:10.21203/rs.3.rs-2922958/v1
Paper-Based Triboelectric Nanogenerators
Yang, J. (2023) · Springer eBooks · doi:10.1007/978-3-031-28111-2_26
PROGRAMMING SHAPE MORPHING IN METAMATERIALS
Wenz, F., Lichti, T., Schwarz, A., Leichner, A., Andrae, H., Huebner, C., & Eberl, C. (2023) · ECCOMAS Thematic Conference on Smart Structures and Materials (SMART) · doi:10.7712/150123.9932.450753
A Scientometrics Review of Origami Structure and Its Applications
余, 晴. (2023) · Operations Research and Fuzziology · doi:10.12677/orf.2023.136683
Hwang, S. J., Ryu, J., & Lee, P. (2023) · Journal of Flexible and Printed Electronics · doi:10.56767/jfpe.2023.2.2.187
Programming Shape Based on Mechanics of Origami
Sharma, A., & Mukhopadhyay, T. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-981-97-0418-7_29
Tailored Motion of Folded Ribbons: An Algorithmic Approach to Curved-Crease OrigamiPreprint
Woodruff, S. R., & Filipov, E. T. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4857910
Two-Stage Origami-Based Vibration Isolators with High-Static-Low-Dynamic-Stiffness Characteristics
Liu, S., Lyu, S., Zheng, Q., & Ding, X. (2024) · International Conference on Reconfigurable Mechanisms and Robots (ReMAR) · doi:10.1109/remar61031.2024.10617738
Zheng, Y., He, L., Wu, H., Li, S., Zhang, J., Yang, C., Luo, Y., & Luo, Y. (2026) · Structures · doi:10.1016/j.istruc.2026.112713
Origami Infrastructure: A Viable Solution to Construction for Challenging Environments
Müller, C. C., Bordo, A. B., & ElZomor, M. (2024) · ASCE International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (Earth and Space) · doi:10.1061/9780784485736.051
Photo‐Thermal Approaches on Polyimide Film for Demonstration of Sub‐50 µm Polymer Stencil Mask
Koo, B., Lee, J. H., Kwon, H., Lee, H., Jeong, J., Ahn, S., & Seo, M. (2025) · Advanced Electronic Materials · doi:10.1002/aelm.202400979 · Cited by 1
Explosive rigidity percolation in origami
Li, R., & Choi, G. P. T. (2025) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2024.0826 · Cited by 2
Tailored Motion of Folded Ribbons: An Algorithmic Approach to Curved-Crease OrigamiPreprint
Woodruff, S. R., & Filipov, E. T. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5353070
Yuan, Q., Feng, N., Yan, J., Biczo, A., Guo, J., & Wang, J. L. (2025) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202500230
Design and Control of the Sarrus Lifting Mobile Robot
Thai, P. T., Khong, C. N. H., Vu, L. K., Hoang, H. D., & Phan, T. T. P. (2025) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-96126-7_54
Feng, H., Zhu, J., & Yang, Y. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.114131
Tailored motion of folded ribbons: An algorithmic approach to singly curved-crease origami
Woodruff, S. R., & Filipov, E. T. (2025) · Computers & Structures · doi:10.1016/j.compstruc.2025.108038
Novel Kresling variant patterns for inverse origami design
Zhao, Y. F., Liu, Q., & Wei, Y. (2025) · Computer-Aided Design · doi:10.1016/j.cad.2025.104008
Discovering Folding Lines for Surface Compression
Aoki, T., Tachi, T., & Luković, M. K. (2025) · SIGGRAPH Asia Conference Papers · doi:10.1145/3757377.3763983
“In contrast, much of the prior research on origami has focused on tessellations for developable surfaces, exploring various methods for approximating 3D shapes from 2D sheets [Demaine and Tachi 2017; Dudte et al. 2016; Tachi 2013].”
Self-citationDesign of Morphing and Multifunctional Shape Profiles Through Cutting Tessellations
Palmu, M., Kankkunen, T., de Waal, L., Dias, M. A., & Peltonen, K. (2026) · Lecture notes in mechanical engineering · doi:10.1007/978-981-96-8664-3_30
A Pneumatic Origami-Inspired Continuum Robot with Active Crease Control for Multimodal Deformation
Yu, Y., Wang, D., Chen, P., & Liu, Y. (2025) · IEEE International Conference on Automation, Electronics and Electrical Engineering (AUTEEE) · doi:10.1109/auteee67053.2025.11322153
“In recent years, origami structures have offered a novel pathway: through careful design of crease topology, facet geometry, and initial fold angles, one can programmably regulate deformation modes, amplitudes, and stiffness[8].”
Wang, X., Zhang, Z., Gao, X., Sun, Y. M., Chen, Y., Zhong, X., & Jiang, D. (2026) · Buildings · doi:10.3390/buildings16020423
Thick Origami–Based Design of a Compactly Stowable Deployable Wing
Kim, B., Miyazawa, Y., Yang, J., & Lee, H.-T. (2026) · AIAA SciTech Forum · doi:10.2514/6.2026-1910
Higher-Order Derivatives of Origami Architectures for Reconfigurable Space Antenna Design
Sharma, A., Naskar, S., & Mukhopadhyay, T. (2026) · AIAA SciTech Forum · doi:10.2514/6.2026-1705
Unger, G., & Sung, C. (2026) · Lecture notes in mechanical engineering · doi:10.1007/978-981-96-8661-2_7
Kinematic Modeling of Cylindrical Origami Tessellations for Programmable Local Motion Control
Wang, Y., Zhang, W., & Tang, K. (2026) · Lecture notes in mechanical engineering · doi:10.1007/978-981-96-8661-2_25
Data-driven and interpretable stiffness modeling of deployable origami structuresPreprint
Li, S. (2026) · Research Square · doi:10.21203/rs.3.rs-9144715/v1
Morphable architected materials with topologically variable and volumetric reconfiguration
Xiao, K., Wang, Y., Song, C., Zou, B., Liang, Z., Han, H., Ding, Q., Du, Y., Johnson, S., Neogi, A., et al. (2026) · Materials Horizons · doi:10.1039/d5mh02438b
Inflating to shape : from soft architectured elastomers to patterned fabric sheets
Siéfert, E. (2019) · theses.fr (ABES) · doi:10.70675/e58969e0z39adz4f9dz80f0z873a79436543 · Cited by 6
Wrinkling and folding induced pattern formation in elastic thin sheets
Andrade-Silva, I. (2019) · theses.fr (ABES) · doi:10.70675/396fa5d6z916bz4c7cz963dz71b7b8f1748b
Modélisation numérique de rubans par éléments en courbures
Charrondière, R. (2021) · theses.fr (ABES) · doi:10.70675/8dd05108z7d9dz41dazb78cz03c1908131c6
The Role of SHH Signaling in Regulating Species-Specific Jaw Size
Vavrušová, Z. (2021) · theses.fr (ABES) · doi:10.70675/30249943zee54z48cfz9420zb883bf4c759f
Origami as a platform for tuning drag force
Nain, R. (2024) · theses.fr (ABES) · doi:10.70675/399d32cfze736z4050z946bz73b1b5476290
Origami-Inspired 3-DoF Robotic Joint Design With Pneumatic Actuators
Yu, Y., Deng, Z., Sun, H., Zhao, N., Zhang, Y., Chen, P., & Liu, Y. (2026) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2026.3682523
“Origami structures enable programmable control of deformation modes and amplitudes by tailoring the crease-pattern topology, facet geometry, and initial folding angles [31].”
Mechanism-based metamaterials with microstructurally invariant shape-change
Peng, Y., Rahman, A., Celli, P., & Plucinsky, P. (2026) · Extreme Mechanics Letters · doi:10.1016/j.eml.2026.102486
Collapsible scissored surfaces
Toyonaga, N., Nishimoto, S., Decker, C. J., Wood, R. J., Tachi, T., & Mahadevan, L. (2026) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2605221123
Self-citationProgramming stability and stiffness in two-dimensional multistable structures
Bonthron, M., Pierce, T., & Tubaldi, E. (2026) · Physical Review Research · doi:10.1103/z2s6-trnj
Ori-DID: a direct inverse design method for origami structures
Wang, T., Su, Z., Liu, W., Ma, J., & Chen, Y. (2026) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2026.111864
A Unified Homogenization Framework for Straight- and Curved-Crease Origami Materials
Li, M., Maestre, J. S. M., Ganier, E., Mundilova, K., Pauly, M. V., & Thomaszewski, B. (2026) · ACM Transactions on Graphics · doi:10.1145/3811301
“Their ability to approximate curved surfaces has been investigated as well [Dudte et al. 2016; Nassar et al. 2017].”
A novel family of developable tessellated metamaterials based on flasher-like curved-crease origami
Li, H., Wang, Y., Song, K., & Zhou, X. (2026) · Thin-Walled Structures · doi:10.1016/j.tws.2026.115372
Digintel metasurface of extensive reprogrammable morphing
Lin, W., Qin, L., Wang, Q., Liu, L., Yan, Y., Qin, H., & Liu, Y. (2026) · Science Advances · doi:10.1126/sciadv.aef3895
“…demonstrated that bistable or multistable unit cells, such as curved beams/truss ( 36 , 37 ), dome/shell bistable ( 38 – 40 ), origami/kirigami bistable ( 4 , 41 – 43 ), and other ( 44 , 45 ) structures, can be used to construct reconfigurable surfaces capable of adopting multiple 3D morphologies.”
An ingestible origami-inspired metamaterial for prolonged oral delivery of therapeutics
Javid, F., Babaee, S., Quigley, J., Kirtane, A. R., Mazdiyasni, H., Rogner, J., Cleveland, C., Bensel, T., Soares, V. V., Collins, J. E., et al. (2026) · Nature Communications · doi:10.1038/s41467-026-76028-y
“Through careful design of periodic fold patterns, i.e. creases, origami structures can attain properties like extreme compactness and controlled expansion 26 – 31 .”
Concurrent topology and geometry optimization of origami structures via strain energy minimization
Tang, Y., Wang, W., Duan, H., & Liu, K. (2026) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2026.0207
Data-free physics-informed inverse programming of bistable kirigami energy landscapes
Kang, S., Kang, S., Kim, S., & Ryu, S. (2026) · Materials Horizons · doi:10.1039/d6mh00630b
Zhu, L., & Zhang, J. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7275638
Yu, S. Y., Ahn, S., Lee, W., Moon, S., Hong, H., & Cho, K. (2026) · Advanced Science · doi:10.1002/advs.77127
Ji, Z., Wang, S., & Wang, C. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7360859
Shi, C., Li, M., Yao, C., Chen, S., He, Y., Xu, J., Yang, G., Guo, H., Liu, R., & Deng, Z. (2026) · Aerospace Science and Technology · doi:10.1016/j.ast.2026.113726
Geometry–Mechanics Compatibility Enables Interpretable Inverse Design of Non-Rigid Origami
Sun, Y., Song, K., Wang, Y., Xue, W., Li, Y., & Zhou, X. (2026) · Research · doi:10.34133/research.1443
“Encoding functional behaviors into geometry is a central aspiration in architected physical systems [ 1 – 3 ].”
Lu, Y., Liang, S., Niu, J., Jie, C., Zhang, S., Zhang, H., Jia, D., & Huang, W. (2026) · Advanced Science · doi:10.1002/advs.77522
Luan, Y., Zhang, M., Qiao, D., Zhang, Z., Sun, J., & Ren, L. (2026) · Theoretical and Applied Mechanics Letters · doi:10.1016/j.taml.2026.100746
Domino-like propagation of localized deformation in origami structures
Zang, S. (2026) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2630936123
Modeling and Simulation of Sheet Metal Deformation for the Generation of Folded Surfaces
Corzanu, V., Duță, A., Cretu, S.-M., Corzanu, A., & Stojičević, M. (2026) · FME Transaction · doi:10.5937/fme2604641c
Metadata
- Authors
- Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L.
- Affiliations
- Harvard University (US)
- The University of Tokyo (JP)
- Corresponding author
- Mahadevan, L.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 5
- Pages
- 583-588
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2273175535
- Semantic Scholar
- 474a0f972a1f02097c67324c81e38202fd02863e
- Cited by
- 486
- References
- 24
- Citations by year
- 2026: 36 · 2025: 44 · 2024: 48 · 2023: 60 · 2022: 52 · 2021: 60 · 2020: 51 · 2019: 37 · 2018: 49 · 2017: 37 · 2016: 12
- FWCI
- 39.94
- Type
- journal article
- Language
- en
- Open access
- green
- arxiv.org
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- arXiv (Cornell University)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Analysis and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Keywords
- origami tessellations, curved surfaces, constrained optimization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.