Multi-pulse drug delivery from a resorbable polymeric microchip device
The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Abstract
Controlled-release drug delivery systems have many applications, including treatments for hormone deficiencies and chronic pain. A biodegradable device that could provide multi-dose drug delivery would be advantageous for long-term treatment of conditions requiring pulsatile drug release. In this work, biodegradable polymeric microchips were fabricated that released four pulses of radiolabelled dextran, human growth hormone or heparin in vitro. Heparin that was released over 142 days retained on average 96 +/- 12% of its bioactivity. The microchips were 1.2 cm in diameter, 480-560 microm thick and had 36 reservoirs that could each be filled with a different chemical. The devices were fabricated from poly(L-lactic acid) and had poly(D,L-lactic-co-glycolic acid) membranes of different molecular masses covering the reservoirs. A drug delivery system can be designed with the potential to release pulses of different drugs at intervals after implantation in a patient by using different molecular masses or materials for the membrane.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Novel multi-pulsatile delivery devices have developed in which there is a predetermined off period followed by rapid and transient drug release in a cycle until the device is degraded.”
From Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier (2011) · cites this paper as [65]
In the citing paper
“PLGA is also an attractive candidate for devices with multi-drug delivery and multi-pulsed delivery applications because of its desirable and tunable properties [62–65].”
From Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier (2011) · cites this paper as [65]
Citations
Cites
Arky, R. A. (1994) · Cited by 2,632
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00048-3 · Cited by 2,617
Mechanisms of polymer degradation and erosion
Göpferich, A. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85755-3 · Cited by 1,781
Langer, R. (1990) · Science · doi:10.1126/science.2218494 · Cited by 1,778
Self-citationBiodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Hydrolytic degradation of devices based on poly(DL-lactic acid) size-dependence
Grizzi, I., Garreau, H., Li, S., & Vert, M. (1995) · Biomaterials · doi:10.1016/0142-9612(95)93258-f · Cited by 895
A controlled-release microchip
Santini, J. T., Cima, M. J., & Langer, R. (1999) · Nature · doi:10.1038/16898 · Cited by 868
Self-citationBiodegradable poly(lactic acid) polymers
Kulkarni, R. K., Moore, E. G., Hegyeli, A. F., & Leonard, F. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050305 · Cited by 799
Miller, R. A., Brady, J. M., & Cutright, D. E. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110507 · Cited by 722
Electrically erodible polymer gel for controlled release of drugs
Kwon, I. C., Bae, Y. H., & Kim, S. W. (1991) · Nature · doi:10.1038/354291a0 · Cited by 655
Research works printed but not linked: 2
- Santini, J.T. Jr, Richards, A.C., Scheidt, R., Cima, M.J. & Langer, R. Microchips as controlled drug-delivery devices. Angew. Chem. Int. Edn 39, 2396–2407 (2000). · DOI · Paper page
- Kost, J. & Langer, R. in Pulsed and Self-Regulated Drug Delivery (ed. Kost, J.) 3–16 (CRC Press, Boca Raton, Florida, 1990).
Cited by
Items 201–300 of 443
Choi, G., Fitriasari, E. I., & Park, C. (2021) · ACS Nano · doi:10.1021/acsnano.1c04276 · Cited by 33
Design of an implantable active microport system for patient specific drug release
Geipel, A., Goldschmidtboeing, F., Jantscheff, P., Esser, N., Massing, U., & Woias, P. (2008) · Biomedical Microdevices · doi:10.1007/s10544-007-9147-2 · Cited by 32
Implantable small device enabled with magnetic actuation for on-demand and pulsatile drug delivery
Lee, S. H., Kim, B. H., Park, C. G., Lee, C., Lim, B. Y., & Choy, Y. B. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.07.037 · Cited by 31
Smart magnetocaloric coatings for implants: Controlled drug release for targeted delivery
Komlev, A. S., Gimaev, R. R., & Zverev, V. I. (2021) · Physics Open · doi:10.1016/j.physo.2021.100063 · Cited by 33
Clinically advancing and promising polymer-based therapeutics
Souery, W. N., & Bishop, C. J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.044 · Cited by 31
Biodegradable bioelectronics for biomedical applications
Lee, S., Silva, S. M., Aguilar, L. M. C., Eom, T., Moulton, S. E., & Shim, B. S. (2022) · Journal of Materials Chemistry B · doi:10.1039/d2tb01475k · Cited by 36
Hilt, J. Z. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2004.07.002 · Cited by 30
The development of an autonomous self-powered bio-sensing actuator
Hanashi, T., Yamazaki, T., Tanaka, H., Ikebukuro, K., Tsugawa, W., & Sode, K. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.01.117 · Cited by 30
Inorganic dissolvable electronics: materials and devices for biomedicine and environment
Cheng, H. (2016) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2016.289 · Cited by 30
Preprogrammed Long‐Term Systemic Pulsatile Delivery of Parathyroid Hormone to Strengthen Bone
Dang, M., Koh, A. J., Danciu, T., McCauley, L. K., & Ma, P. X. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600901 · Cited by 30
Huang, M., Chou, A., Lien, S., Chen, H., Huang, C., Chen, W., Chong, P. C.-S., Liu, S., & Leng, C. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31352 · Cited by 29
Deciphering cellular morphology and biocompatibility using polymer microarrays
Pernagallo, S., Unciti‐Broceta, A., Díaz‐Mochon, J. J., & Bradley, M. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034112 · Cited by 28
Islam, P., Schaly, S., Abosalha, A. K., Boyajian, J. L., Thareja, R., Ahmad, W., Shum‐Tim, D., & Prakash, S. (2024) · Wiley Interdisciplinary Reviews Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1941 · Cited by 35
Buck, M. E., & Lynn, D. M. (2009) · Advanced Materials · doi:10.1002/adma.200903054 · Cited by 33
Programmable implants—From pulsatile to controlled release
Guse, C., Koennings, S., Blunk, T., Siepmann, J., & Göpferich, A. M. (2006) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2005.12.051 · Cited by 28
Polysaccharide based covalently linked multi-membrane hydrogels
Dhanasingh, A. E., & Gröll, J. (2011) · Soft Matter · doi:10.1039/c1sm06603j · Cited by 28
Drug Discovery and Delivery in the 21st Century
Triggle, D. J. (2006) · Medical Principles and Practice · doi:10.1159/000096133 · Cited by 31
Nanofabrication Techniques for Controlled Drug-Release Devices
Chen, L., Henein, G., & Luciani, V. (2010) · Nanomedicine · doi:10.2217/nnm.10.140 · Cited by 28
Grayson, A. C. R., Cima, M. J., & Langer, R. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30019 · Cited by 29
Self-citationLong-acting therapeutic delivery systems for the treatment of gliomas
Padmakumar, S., & Amiji, M. M. (2023) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2023.114853 · Cited by 29
Transient Implantable Electronics for Postsurgery Preventive Medicine
Mirzajani, H., Zolfaghari, P., Nakhjavani, S. A., Koca, B. Y., Khodapanahandeh, M., & Ürey, H. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202413324 · Cited by 31
The Art of Immobilization Using Biopolymers, Biomaterials and Nanobiotechnology
Elnashar, M. M. M. (2011) · InTech eBooks · doi:10.5772/23696 · Cited by 30
Rapid Formation of Acrylated Microstructures by Microwave‐Induced Thermal Crosslinking
Lee, S. H., Lee, W. G., Chung, B. G., Park, J. H., & Khademhosseini, A. (2009) · Macromolecular Rapid Communications · doi:10.1002/marc.200900199 · Cited by 26
Geest, B. G. D., Koker, S. D., Demeester, J., Smedt, S. C. D., & Hennink, W. E. (2009) · Polymer Chemistry · doi:10.1039/b9py00287a · Cited by 26
Dissolvable tattoo sensors: from science fiction to a viable technology
Cheng, H., & Yi, N. (2016) · Physica Scripta · doi:10.1088/0031-8949/92/1/013001 · Cited by 27
Pei, Y., Wang, X., Huang, W., Liu, P., & Zhang, L. (2013) · Cellulose · doi:10.1007/s10570-013-9930-6 · Cited by 25
Repetitive on-demand drug release by magnetic heating of iron oxide containing polymeric implants
Rovers, S. A., Hoogenboom, R., Kemmere, M. F., & Keurentjes, J. T. F. (2011) · Soft Matter · doi:10.1039/c2sm06557f · Cited by 25
Halloysite Nanotube Composited Thermo-responsive Hydrogel System for Controlled-release
Lin, X., Ju, X., Xie, R., Jiang, M., Wei, J., & Chu, L. (2013) · Chinese Journal of Chemical Engineering · doi:10.1016/s1004-9541(13)60572-8 · Cited by 23
Elman, N. M., & Upadhyay, U. M. (2010) · Current Pharmaceutical Biotechnology · doi:10.2174/138920110791233262 · Cited by 25
Formation and Characterization of pH-Responsive Liquid Core Microcapsules
Gun, W. J., & Routh, A. F. (2013) · Langmuir · doi:10.1021/la403175w · Cited by 25
Microstructured Biodegradable Fibers for Advanced Control Delivery
Shadman, S., Nguyen-Dang, T., Gupta, T. D., Page, A. G., Richard, I., Leber, A., Ruža, J., Krishnamani, G., & Sorin, F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910283 · Cited by 29
Figueiredo, E. C., Dias, A. C. B., & Arruda, M. A. Z. (2008) · Revista Brasileira De Ciencias Farmaceuticas · doi:10.1590/s1516-93322008000300005 · Cited by 24
Enzyme Prodrug Therapy Engineered into Biomaterials
Mendes, A. C., & Zelikin, A. N. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304312 · Cited by 24
2D‐ and 3D‐microstructured biodegradable polyester resins
Vaida, C., Mela, P., Keul, H., & Möller, M. (2008) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22987 · Cited by 27
Microfabrication Technology of Biodegradable Polymers for Interconnecting Microstructures
Ryu, W., Fasching, R. J., Vyakarnam, M., Greco, R. S., & Prinz, F. B. (2006) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2006.883566 · Cited by 23
Dechy‐Cabaret, O., Martín-Vaca, B. M., & Bourissou, D. (2009) · Wiley eBooks · doi:10.1002/9783527628407.ch10 · Cited by 28
Tough hydrogel module towards an implantable remote and controlled release device
Low, Z. W. K., Luo, Y., Zhang, K., Lin, Q., Owh, C., Chen, X., & Loh, X. J. (2019) · Biomaterials Science · doi:10.1039/c9bm01882d · Cited by 22
Candida Infection Associated with Salivary Gland—A Narrative Review
Ok, S., Ho, D., Lynd, T. O., Ahn, Y., Ju, H., Jeong, S., & Cheon, K. (2020) · Journal of Clinical Medicine · doi:10.3390/jcm10010097 · Cited by 28
Law, C. S., Santos, A., Kumeria, T., & Lošić, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5091963 · Cited by 22
Yang, F., Wornyo, E., Gall, K., & King, W. P. (2007) · Scanning · doi:10.1002/sca.20074 · Cited by 22
Cellulose/poly(ethylene glycol) blend and its controllable drug release behaviors in vitro
Shen, Q., & Liu, D.-S. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.10.012 · Cited by 23
Dynamic Monte Carlo study on the permeation of polymer chains through small holes
Luo, M. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.055 · Cited by 22
Prospective pathways of green graphene-based lab-on-chip devices: the pursuit toward sustainability
Sengupta, J., & Hussain, C. M. (2022) · Microchimica Acta · doi:10.1007/s00604-022-05286-6 · Cited by 22
A Scalable Platform for Fabricating Biodegradable Microparticles with Pulsatile Drug Release
Graf, T. P., Qiu, S. Y., Varshney, D., Laracuente, M., Euliano, E. M., Munnangi, P., Pogostin, B. H., Baryakova, T. H., GARYALI, A., & McHugh, K. J. (2023) · Advanced Materials · doi:10.1002/adma.202300228 · Cited by 22
Elman, N. M., Masi, B. C., Cima, M. J., & Langer, R. (2010) · Lab on a Chip · doi:10.1039/c005135g · Cited by 21
Self-citationMirvakili, S. M., Ngo, Q. P., & Langer, R. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c00648 · Cited by 22
Self-citationDiscrete Chemical Release From a Microfluidic Chip
Hu, M., Lindemann, T., Göttsche, T., Kohnle, J., Zengerle, R., & Koltay, P. (2007) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2007.892911 · Cited by 21
Fejerskov, B., Jensen, N. B. S., Teo, B. M., Städler, B., & Zelikin, A. N. (2013) · Small · doi:10.1002/smll.201303101 · Cited by 20
Cho, H.-J., Jeon, S., Yang, J., Baek, S. Y., & Kim, D. (2020) · Coatings · doi:10.3390/coatings10070663 · Cited by 22
Microfabrication Techniques in Scaffold Development
Bettinger, C. J., Borenstein, J. T., & Langer, R. (2014) · CRC Press eBooks · doi:10.1201/b17444-6 · Cited by 21
Self-citationMicrochannel system for rate-controlled, sequential, and pH-responsive drug delivery
Yang, D. S., Lee, J. S., Choi, C. K., Lee, H.-P., Cho, S., & Ryu, W. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.013 · Cited by 20
Clavreul, A., Masouleh, M. P., Roger, E., & Meneï, P. (2019) · International Journal of Nanomedicine · doi:10.2147/ijn.s194858 · Cited by 22
Nanotechnology and Biomaterials
Thomas, J. B., Peppas, N. A., Sato, M., & Webster, T. J. (2006) · CRC Press eBooks · doi:10.1201/9781420004014.ch22 · Cited by 19
Nanoporous Polymeric Nanofibers Based on Selectively Etched PS- b -PDMS Block Copolymers
Demirel, G. B., Büyükserin, F., Morris, M. A., & Demirel, G. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am201331b · Cited by 19
Local strategies and delivery systems for the treatment of malignant gliomas
Yu, F. G., Asghar, S., Zhang, M., Zhang, J., Ping, Q., & Xiao, Y. (2018) · Journal of drug targeting · doi:10.1080/1061186x.2018.1509982 · Cited by 21
Optimization of PLG microspheres for tailored drug release
Berchane, N. S., Jebrail, F. F., & Andrews, M. J. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2009.09.010 · Cited by 19
The ascendance of combination products
Shmulewitz, A., & Langer, R. (2006) · Nature Biotechnology · doi:10.1038/nbt0306-277b · Cited by 19
Self-citationOn–off switchable drug release from multi-responsive degradable poly(ether urethane) nanoparticles
Wang, Y., Wu, G., Li, X., Wang, Y., Gao, H., & Ma, J. (2013) · Biomaterials Science · doi:10.1039/c3bm00188a · Cited by 19
Targeted electrohydrodynamic printing for micro-reservoir drug delivery systems
Hwang, T. H., Kim, J. B., Yang, D. S., Park, Y. I., & Ryu, W. (2013) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/23/3/035012 · Cited by 18
Polyelectrolyte Multilayer Films – A General Approach to (Bio)functional Coatings
Benkirane-Jessel, N., Lavall�e, P., Ball, V., Ogier, J., Senger, B., Picart, C., Schaaf, P., Voegel, J., & Decher, G. (2007) · doi:10.1002/9783527631421.ch30 · Cited by 18
Electronically powered drug delivery devices: considerations and challenges
Liu, G., Lu, Y., Zhang, F., & Liu, Q. (2022) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2022.2141709 · Cited by 20
Mousavi, M. S. S., Karami‐Horestani, A., Ghasemnejad, M., Kolahdouz, M., Manteghi, F., & Ataei, F. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.06.034 · Cited by 18
Geest, B. G. D., Mehuys, E., Laekeman, G., Demeester, J., & Smedt, S. C. D. (2006) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.3.4.459 · Cited by 19
Pesce, C., Rodella, G., Fragassi, A., Garofalo, M., Salmaso, S., Caliceti, P., Gallez, B., & Malfanti, A. (2025) · Nanomedicine · doi:10.1080/17435889.2025.2550239 · Cited by 26
pH-triggered micellar membrane for controlled release microchips
Yang, X., Moosa, B., Deng, L., Zhao, L. P., & Khashab, N. M. (2011) · Polymer Chemistry · doi:10.1039/c1py00300c · Cited by 16
EXACT GROUND STATES OF CORRELATED ELECTRONS ON PENTAGON CHAINS
Gulácsi, Z. (2013) · International Journal of Modern Physics B · doi:10.1142/s0217979213300090 · Cited by 16
Biodegradation of 3D‐printed polylactic acid milliprojections under physiological conditions
Tang, T. O., & Simon, G. P. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49129 · Cited by 17
Implantable micro-chip for controlled delivery of diclofenac sodium
Lee, S. H., Park, M., Park, C. G., Kim, B.-H., Lee, J., Choi, S.-Y., Nam, S.-R., Park, S., & Choy, Y. B. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.09.019 · Cited by 16
A microfabrication method of a biodegradable polymer chip for a controlled release system
Ito, Y., Hasuda, H., Morimatsu, M., Takagi, N., & Hirai, Y. (2005) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/1568562054414621 · Cited by 19
Micro- and Nanofabricated Scaffolds
Bettinger, C. J., Borenstein, J. T., & Langer, R. (2007) · Elsevier eBooks · doi:10.1016/b978-012370615-7/50028-7 · Cited by 16
Self-citationBiodegradable Implantable Electronics with Wireless Technology for Real‐Time Clinical Applications
Cho, M., Chae, J. W., Park, Y., Yu, K. J., & Won, S. M. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202503424 · Cited by 19
Chau, C. F., & Melvin, T. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085028 · Cited by 15
BIOCOMPATIBLE POLYMERS FOR 3D PRINTING
Lupuleasa, D. (2018) · FARMACIA · doi:10.31925/farmacia.2018.5.1 · Cited by 16
Okeyo, P. O., Rajendran, S. T., Zór, K., & Boisen, A. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113850 · Cited by 15
Microcapsule flow behaviour in porous media
Gun, W. J., & Routh, A. F. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.08.028 · Cited by 16
Micro-electro-mechanical system–based drug delivery devices
Gupta, A., & Pal, P. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102420-1.00010-8 · Cited by 20
Electron-phonon interactions in conducting polymers
Gulácsi, M., El-Mansy, M. A. M., & Gulácsi, Z. (2016) · Philosophical Magazine Letters · doi:10.1080/09500839.2016.1150611 · Cited by 14
Ullah, R. S., Wang, L., Yu, H., Haroon, M., Elshaarani, T., Naveed, K., Fahad, S., Khan, A., Nazir, A., Xia, X., et al. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2843-x · Cited by 14
Direct-Writing of Biomedia for Drug Delivery and Tissue Regeneration
Desai, S. S., & Harrison, B. S. (2009) · Biological and medical physics series · doi:10.1007/978-1-4419-1395-1_5 · Cited by 15
Xia, Y., & Pack, D. W. (2014) · Pharmaceutical Research · doi:10.1007/s11095-014-1412-5 · Cited by 16
An in-vivo evaluation of a MEMS drug delivery device using Kunming mice model
Liu, Y., Song, P., Liu, J., Tng, D. J. H., Hu, R., Chen, H., Hu, Y., Tan, C. H., Wang, J., Liu, J., et al. (2015) · Biomedical Microdevices · doi:10.1007/s10544-014-9917-6 · Cited by 14
Ultrasound mediated release from stimuli-responsive core–shell capsules
Chang, M., Edirisinghe, M. J., & Stride, E. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20465k · Cited by 15
Recent advancements in single dose slow‐release devices for prophylactic vaccines
Ray, S., Puente, A. A., Steinmetz, N. F., & Pokorski, J. K. (2022) · Wiley Interdisciplinary Reviews Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1832 · Cited by 18
BioMEMs for drug delivery applications
Kulinsky, L., & Madou, M. J. (2012) · Elsevier eBooks · doi:10.1533/9780857096272.3.218 · Cited by 14
Tyler, B., Liu, A., Sankey, E. W., Mangraviti, A., Barone, M., & Brem, H. (2016) · Academic Medicine · doi:10.1097/acm.0000000000001136 · Cited by 13
Self-citationNANO/MICROSCALE TECHNOLOGIES FOR DRUG DELIVERY
Li, H., Kochhar, J. S., PAN, J., Chan, S. Y., & Kang, L. (2011) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s021951941100406x · Cited by 13
Correlation and confinement induced itinerant ferromagnetism in chain structures
Trencsényi, R., Kovács, E., & Gulácsi, Z. (2009) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786430902810498 · Cited by 13
Majumder, D. D., Banerjee, R., Mukhopadhayay, S. K., Ulrichs, C., Mewis, I., Samanta, A., Das, A., Adhikary, S., & Goswami, A. (2006) · IETE Journal of Research · doi:10.1080/03772063.2006.11416474 · Cited by 13
Biomechanical evaluation of a bioresorbable odontoid screw
Ames, C. P., Crawford, N. R., Chamberlain, R. H., Deshmukh, V. R., Sadikovic, B., & Sonntag, V. K. H. (2005) · Journal of Neurosurgery Spine · doi:10.3171/spi.2005.2.2.0182 · Cited by 13
Chiriac, A. P., Nita, L. E., Nistor, M. T., & Mititelu-Tarțău, L. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.07.073 · Cited by 13
REVIEW ARTICLE ON PULSATILE DRUG DELIVERY SYSTEM
VENKATASWAMY, R., & NALLAGUNTLA, L. (2021) · Asian Journal of Pharmaceutical and Clinical Research · doi:10.22159/ajpcr.2021.v14i6.41476 · Cited by 12
Controlled drug delivery using microfluidic devices
Gao, N., & Li, X. J. (2013) · Elsevier eBooks · doi:10.1533/9780857097040.2.167 · Cited by 13
Bergstrand, A., Uppström, S., & Larsson, A. (2014) · International Journal of Polymer Science · doi:10.1155/2014/958975 · Cited by 13
Intelligent drug-delivery Devices Based on micro- and nano-technologies
Chi, A., Clayton, K., Burrow, T., Lewis, R., Luciano, D., Alexis, F., D’hers, S., & Elman, N. M. (2012) · Therapeutic Delivery · doi:10.4155/tde.12.139 · Cited by 11
Farahat, D., Dang, M., El‐Fallal, A., Badr, N. A., & Ma, P. X. (2024) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37664 · Cited by 12
Interaction-created effective flat bands in conducting polymers
Gulácsi, Z. (2014) · The European Physical Journal B · doi:10.1140/epjb/e2014-50294-x · Cited by 11
Preparation of Porous Poly(3-Hydroxybutyrate) Films by Water-Droplet Templating
Bergstrand, A., Andersson, H., Cramby, J., Sott, K., & Larsson, A. (2012) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2012.34043 · Cited by 12
Implantable photonic crystal for reflection-based optical sensing of biodegradation
Fujishima, M., Sakata, S., Iwasaki, T., & Uchida, K. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2419-7 · Cited by 13
Study on two-stage hot embossing microreplication: silicon to polymer to polymer
Belligundu, S., & Shiakolas, P. S. (2006) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.2198794 · Cited by 11
Dual release scaffolds as a promising strategy for enhancing bone regeneration: an updated review
Zhang, Y., Zhou, C., Xie, Q., Xia, L., Liu, L., Bao, W., Lin, H., Xiong, X., Zhang, H., Zheng, Z., et al. (2025) · Nanomedicine · doi:10.1080/17435889.2025.2457317 · Cited by 10
Metadata
- Authors
- Grayson, A. C. R., Choi, I. S., Tyler, B. M., Wang, P. P., Brem, H., Cima, M. J., & Langer, R.
- Affiliations
- Cornell University (US)
- Korea Advanced Institute of Science and Technology (KR)
- Johns Hopkins University (US)
- Massachusetts Institute of Technology (US)
- Venue
- Nature Materials
- Published
- 2003-10-19
- Volume
- 2
- Issue
- 11
- Pages
- 767-772
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W1969757222
- Cited by
- 444
- References
- 52
- Citations by year
- 2026: 3 · 2025: 10 · 2024: 8 · 2023: 11 · 2022: 14 · 2021: 16 · 2020: 18 · 2019: 14 · 2018: 17 · 2017: 14 · 2016: 20 · 2015: 22 · 2014: 20 · 2013: 36 · 2012: 25
- FWCI
- 16.67
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institute of Allergy and Infectious Diseases (R24-AI47739-02, R24AI047739)
- Topics
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Physical Sciences › Engineering › Biomedical Engineering › Microfluidic and Capillary Electrophoresis Applications
- Physical Sciences › Materials Science › Biomaterials › Nanoparticle-Based Drug Delivery
- Keywords
- controlled drug delivery, poly(L-lactic acid), PLGA membranes, heparin, human growth hormone, dextran
- MeSH terms
- Dextrans, Drug Administration Schedule, Drug Carriers, Drug Compounding, Drug Implants, Equipment Design, Feasibility Studies, Heparin, Miniaturization, Polyesters, Polymers, Lactic Acid, Human Growth Hormone, Equipment Failure Analysis, Coated Materials, Biocompatible, Absorbable Implants
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.