Student or educator? Sign up with your school email and get 6 months of Pro free.

The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.

Heterogeneous integration for on-chip quantum photonic circuits with single quantum dot devices

Open access
Davanco, Marcelo, Liu, Jin, Sapienza, Luca, Zhang, Chen-Zhao, De Miranda Cardoso, José Vinícius, Verma, Varun, Mirin, Richard, Nam, Sae Woo, Liu, Liu, Srinivasan, Kartik · 2017 · Nature Communications

Abstract

Single-quantum emitters are an important resource for photonic quantum technologies, constituting building blocks for single-photon sources, stationary qubits, and deterministic quantum gates. Robust implementation of such functions is achieved through systems that provide both strong light–matter interactions and a low-loss interface between emitters and optical fields. Existing platforms providing such functionality at the single-node level present steep scalability challenges. Here, we develop a heterogeneous photonic integration platform that provides such capabilities in a scalable on-chip implementation, allowing direct integration of GaAs waveguides and cavities containing self-assembled InAs/GaAs quantum dots—a mature class of solid-state quantum emitter—with low-loss Si 3 N 4 waveguides. We demonstrate a highly efficient optical interface between Si 3 N 4 waveguides and single-quantum dots in GaAs geometries, with performance approaching that of devices optimized for each material individually. This includes quantum dot radiative rate enhancement in microcavities, and a path for reaching the non-perturbative strong-coupling regime.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-017-00987-6

Cites

72 of 72 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Principle of operation and device geometry. a Conceptual quantum photonic circuit composed of a passive waveguide network with a directly integrated GaAs nanophotonic device (exemplified by a nanowaveguide) containing a single quantum dot. A zoomed-in image of the GaAs device region (inside the dashed boundary box) shows details of the geometry and operation principle of the hybrid photonic integration platform. The light–matter interaction section of the device promotes efficient coupling between a confined electromagnetic field (in this case, a wave confined in a GaAs nanowaveguide) and a single-InAs QD embedded in the GaAs. Adiabatic mode transformers allow light from the QD in the light–matter interaction region to be efficiently transferred to a Si3N4 waveguide, and, conversely, also allow the QD to be accessed efficiently with resonant light guided by the Si3N4 waveguide. b, c Cross-sections of passive Si3N4 and active GaAs waveguides that form the core elements of the integration platform
Fig. 1 Principle of operation and device geometry. a Conceptual quantum photonic circuit composed of a passive waveguide network with a directly integrated GaAs nanophotonic device (exemplified by a nanowaveguide) containing a single quantum dot. A zoomed-in image of the GaAs device region (inside the dashed boundary box) shows details of the geometry and operation principle of the hybrid photonic integration platform. The light–matter interaction section of the device promotes efficient coupling between a confined electromagnetic field (in this case, a wave confined in a GaAs nanowaveguide) and a single-InAs QD embedded in the GaAs. Adiabatic mode transformers allow light from the QD in the light–matter interaction region to be efficiently transferred to a Si3N4 waveguide, and, conversely, also allow the QD to be accessed efficiently with resonant light guided by the Si3N4 waveguide. b, c Cross-sections of passive Si3N4 and active GaAs waveguides that form the core elements of the integration platformCC BY · PubMed Central
Fig. 2 Nanophotonic design. a Left panel: electric field distribution for the fundamental TE GaAs supermode of the waveguide stack in Fig. 1c, with dimensions specified in the main text. Center panel: electric field distribution across the mode-transformer cross-section, for a GaAs mode launched at z = 0. At z ≈ 10 μm, the GaAs and Si3N4 guides are phase-matched, and power is efficiently transferred from the top GaAs to the bottom Si3N4 guide. Right panel: fundamental TE mode of the Si3N4 waveguide at the end of the mode transformer. b Coupling efficiency (β), as a function of GaAs width and emission wavelength, of photons emitted by a dipole located at x = 0 and 74 nm below the top surface, into the GaAs waveguide mode traveling in either the +z or −z direction. c Modal power conversion efficiency from the GaAs mode into the Si3N4 mode in (a) as a function of wavelength
Fig. 2 Nanophotonic design. a Left panel: electric field distribution for the fundamental TE GaAs supermode of the waveguide stack in Fig. 1c, with dimensions specified in the main text. Center panel: electric field distribution across the mode-transformer cross-section, for a GaAs mode launched at z = 0. At z ≈ 10 μm, the GaAs and Si3N4 guides are phase-matched, and power is efficiently transferred from the top GaAs to the bottom Si3N4 guide. Right panel: fundamental TE mode of the Si3N4 waveguide at the end of the mode transformer. b Coupling efficiency (β), as a function of GaAs width and emission wavelength, of photons emitted by a dipole located at x = 0 and 74 nm below the top surface, into the GaAs waveguide mode traveling in either the +z or −z direction. c Modal power conversion efficiency from the GaAs mode into the Si3N4 mode in (a) as a function of wavelengthCC BY · PubMed Central
Fig. 3 Device fabrication. a Top: schematic of the bonded wafer stack used in fabrication, consisting of a top III–V layer, containing InAs QDs, that is directly bonded on top of a Si/3 μm SiO2/550 nm Si3N4 stack. Bottom: cross-sectional scanning electron microgaph (SEM) of bonded wafer stack. The ≈30 nm SiNx layer was grown on the GaAs wafer surface prior to bonding. b Top: GaAs device lithography and etching steps. Bottom: optical micrograph of etched GaAs microring resonator and bus waveguide. Au aligment marks used for registered electron-beam lithography are visible. A wet etch protection resist mask (not depicted in the schematic—Supplementary Note 2) is also visible. c Top: Si3N4 waveguide lithography (aligned to the previously etched GaAs device) and etching steps. Bottom: optical micrograph of GaAs microring resonator and bus waveguide, and underlying Si3N4 waveguide. d False-color SEM of tip of mode-transformer geometry, common to both devices in (e, f). e False-color SEM of fabricated GaAs waveguide (yellow) on top of Si3N4 (red) waveguide. Blue regions are exposed SiO2. Insets show details of the mode transformer end tip and the QD photon capture waveguide. f False-color SEM of GaAs microring and bus waveguide, and underlying Si3N4 waveguide. Inset shows details of the microring-bus waveguide evanescent coupling region
Fig. 3 Device fabrication. a Top: schematic of the bonded wafer stack used in fabrication, consisting of a top III–V layer, containing InAs QDs, that is directly bonded on top of a Si/3 μm SiO2/550 nm Si3N4 stack. Bottom: cross-sectional scanning electron microgaph (SEM) of bonded wafer stack. The ≈30 nm SiNx layer was grown on the GaAs wafer surface prior to bonding. b Top: GaAs device lithography and etching steps. Bottom: optical micrograph of etched GaAs microring resonator and bus waveguide. Au aligment marks used for registered electron-beam lithography are visible. A wet etch protection resist mask (not depicted in the schematic—Supplementary Note 2) is also visible. c Top: Si3N4 waveguide lithography (aligned to the previously etched GaAs device) and etching steps. Bottom: optical micrograph of GaAs microring resonator and bus waveguide, and underlying Si3N4 waveguide. d False-color SEM of tip of mode-transformer geometry, common to both devices in (e, f). e False-color SEM of fabricated GaAs waveguide (yellow) on top of Si3N4 (red) waveguide. Blue regions are exposed SiO2. Insets show details of the mode transformer end tip and the QD photon capture waveguide. f False-color SEM of GaAs microring and bus waveguide, and underlying Si3N4 waveguide. Inset shows details of the microring-bus waveguide evanescent coupling regionCC BY · PubMed Central
Fig. 4 Characterizing mode transformer efficiency with a photonic crystal reflector. a Schematic of a PhC reflector device. Top: top-view. Bottom: cross-section. Green arrows indicate pathways taken by the optical signal injected at the input port. R and T stand for PhC modal power transmission and reflection spectra, and T dev, R dev transmission and reflection spectra through the entire device, including lensed fibers. b False-color SEM of fabricated GaAs PhC reflector (yellow) on top of a Si3N4 (pink) waveguide, on top of exposed SiO2 (blue). c FDTD-simulated TE modal transmission (T, purple) and reflection (R, yellow) spectra as a function of wavelength for the PhC (without mode transformers), for two different lattice constants a. d Experimental transmission spectra for various PhC reflectors with a = 250 nm (top) and a = 290 nm (bottom), normalized first to the transmission spectrum of a baseline Si3N4 waveguide (without GaAs sections), then to the mean transmission at wavelengths between 1250 and 1300 nm. Different colors indicate different devices. e Experimental transmission and reflection spectra for a PhC reflector with a = 290 nm, normalized to the transmission spectrum of a baseline Si3N4 waveguide. Gray areas have transmission <−15 dB in (c, d), <−20 dB in (e)
Fig. 4 Characterizing mode transformer efficiency with a photonic crystal reflector. a Schematic of a PhC reflector device. Top: top-view. Bottom: cross-section. Green arrows indicate pathways taken by the optical signal injected at the input port. R and T stand for PhC modal power transmission and reflection spectra, and T dev, R dev transmission and reflection spectra through the entire device, including lensed fibers. b False-color SEM of fabricated GaAs PhC reflector (yellow) on top of a Si3N4 (pink) waveguide, on top of exposed SiO2 (blue). c FDTD-simulated TE modal transmission (T, purple) and reflection (R, yellow) spectra as a function of wavelength for the PhC (without mode transformers), for two different lattice constants a. d Experimental transmission spectra for various PhC reflectors with a = 250 nm (top) and a = 290 nm (bottom), normalized first to the transmission spectrum of a baseline Si3N4 waveguide (without GaAs sections), then to the mean transmission at wavelengths between 1250 and 1300 nm. Different colors indicate different devices. e Experimental transmission and reflection spectra for a PhC reflector with a = 290 nm, normalized to the transmission spectrum of a baseline Si3N4 waveguide. Gray areas have transmission <−15 dB in (c, d), <−20 dB in (e)CC BY · PubMed Central
Fig. 5 Quantum dot-waveguide coupling. a Photoluminescence spectrum for a single QD inside a GaAs waveguide as in Fig. 3e, pumped with 1061 nm wavelength laser light. The PL is transferred to the bottom Si3N4 waveguide, and collected with a lensed optical fiber inside of a Liquid Helium flow cryostat (Supplementary Note 6). Sharp lines are exciton transitions from a single QD. Inset: Fit of PL peak at 1130.18 nm. b Second-order correlation as a function of time delay τ for the 1130.18 nm line. Circles mark experimental data, red line is a fit (Methods section and Supplementary Note 7). c Zoom-in of b near τ = 0. The blue curve and quoted g (2)(0) are obtained from the red fit by deconvolving the detection time-response. Uncertainties for g (2)(0) are 95% fit confidence intervals (two standard deviations). d Photoluminescence decay trace for the 1130.18 nm line. Gray dots are experimental data, the red line is a fit with a monoexponential function with lifetime τ sp. The uncertainty is obtained from the fit and corresponds to a single standard deviation
Fig. 5 Quantum dot-waveguide coupling. a Photoluminescence spectrum for a single QD inside a GaAs waveguide as in Fig. 3e, pumped with 1061 nm wavelength laser light. The PL is transferred to the bottom Si3N4 waveguide, and collected with a lensed optical fiber inside of a Liquid Helium flow cryostat (Supplementary Note 6). Sharp lines are exciton transitions from a single QD. Inset: Fit of PL peak at 1130.18 nm. b Second-order correlation as a function of time delay τ for the 1130.18 nm line. Circles mark experimental data, red line is a fit (Methods section and Supplementary Note 7). c Zoom-in of b near τ = 0. The blue curve and quoted g (2)(0) are obtained from the red fit by deconvolving the detection time-response. Uncertainties for g (2)(0) are 95% fit confidence intervals (two standard deviations). d Photoluminescence decay trace for the 1130.18 nm line. Gray dots are experimental data, the red line is a fit with a monoexponential function with lifetime τ sp. The uncertainty is obtained from the fit and corresponds to a single standard deviationCC BY · PubMed Central
Fig. 6 Quantum dot-cavity coupling. a Photoluminescence (PL) spectra as a function of wavelength from a QD ensemble pumped with laser light at 975 nm, emitting inside three different GaAs microring resonators. Peaks are whispering gallery modes (WGMs) with quality factor Q, which increases with the microring-bus waveguide gap width. b PL spectrum for a single QD coupled to a Q ≈ 1.1 × 104 WGM. Inset: fit of cavity-coupled QD emission near 1126 nm. c, Left: second-order correlation g (2)(τ) for the 1126 nm exciton line in b. Right: close-up near τ = 0. Circles are experimental data, red lines are a fit. The blue curve and quoted g (2)(0) are obtained from the red fit by deconvolving the detection time-response. d PL spectrum for a single QD in a microring, coupled to a Q ≈ 6 × 103 WGM. Circles: experimental data. Blue continuous line: fit. Dashed lines: fitting Lorentzians for the cavity and two excitons, X1 and X2. e g (2)(τ) for X1 in d. Inset: close-up near τ = 0. f, Left panel: PL spectra for varying spectral detuning Δ between X1 and the cavity. Δ is obtained from fits as in d. All spectra are normalized to the intensity maximum at Δ ≈ −0.07 nm. The color scale indicates normalized intensity. Right panel: corresponding X1 photoluminescence decay curves. Gray dots are experimental data, red (blue) lines are biexponential (monoexponential) decay fits. For biexponential fits, τ 1 is the fast lifetime. g, Left panel: integrated intensity as a function of Δ for the filtered X1 exciton contribution to the the PL spectra in f, obtained from Lorentzian fits as in d, normalized by the integrated intensity of the full fitted spectrum. Right panel: decay lifetimes for the fits in f, as a function of Δ. Open blue circles are the fast biexponential decay lifetimes, closed blue circles are the monoexponential decay lifetimes. Uncertainties for g (2)(0), Δ and the X1 magnitude are 95% fit confidence intervals (two standard deviations). Lifetime uncertainties are single standard deviations from the exponential decay fits
Fig. 6 Quantum dot-cavity coupling. a Photoluminescence (PL) spectra as a function of wavelength from a QD ensemble pumped with laser light at 975 nm, emitting inside three different GaAs microring resonators. Peaks are whispering gallery modes (WGMs) with quality factor Q, which increases with the microring-bus waveguide gap width. b PL spectrum for a single QD coupled to a Q ≈ 1.1 × 104 WGM. Inset: fit of cavity-coupled QD emission near 1126 nm. c, Left: second-order correlation g (2)(τ) for the 1126 nm exciton line in b. Right: close-up near τ = 0. Circles are experimental data, red lines are a fit. The blue curve and quoted g (2)(0) are obtained from the red fit by deconvolving the detection time-response. d PL spectrum for a single QD in a microring, coupled to a Q ≈ 6 × 103 WGM. Circles: experimental data. Blue continuous line: fit. Dashed lines: fitting Lorentzians for the cavity and two excitons, X1 and X2. e g (2)(τ) for X1 in d. Inset: close-up near τ = 0. f, Left panel: PL spectra for varying spectral detuning Δ between X1 and the cavity. Δ is obtained from fits as in d. All spectra are normalized to the intensity maximum at Δ ≈ −0.07 nm. The color scale indicates normalized intensity. Right panel: corresponding X1 photoluminescence decay curves. Gray dots are experimental data, red (blue) lines are biexponential (monoexponential) decay fits. For biexponential fits, τ 1 is the fast lifetime. g, Left panel: integrated intensity as a function of Δ for the filtered X1 exciton contribution to the the PL spectra in f, obtained from Lorentzian fits as in d, normalized by the integrated intensity of the full fitted spectrum. Right panel: decay lifetimes for the fits in f, as a function of Δ. Open blue circles are the fast biexponential decay lifetimes, closed blue circles are the monoexponential decay lifetimes. Uncertainties for g (2)(0), Δ and the X1 magnitude are 95% fit confidence intervals (two standard deviations). Lifetime uncertainties are single standard deviations from the exponential decay fitsCC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 72 references

Cited by

See all 306

Metadata

Authors
Davanco, M., Liu, J., Sapienza, L., Zhang, C.-Z., De Miranda Cardoso, J. V., Verma, V., Mirin, R., Nam, S. W., Liu, L., & Srinivasan, K.
Affiliations
  • National Institute of Standards and Technology (US)
  • South China Normal University (CN)
Corresponding author
  • Liu, Jin
  • Srinivasan, Kartik
Venue
Nature Communications
Published
2017-10-12
Volume
8
Issue
1
Pages
889-889
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2762061373
Cited by
306
References
72
Citations by year
2026: 25 · 2025: 38 · 2024: 37 · 2023: 30 · 2022: 33 · 2021: 23 · 2020: 33 · 2019: 47 · 2018: 31 · 2017: 8
FWCI
15.97
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • ENLIGHTEN (Jurnal Bimbingan dan Konseling Islam) (acceptedVersion)
  • ePrints Soton (University of Southampton) (acceptedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • Apollo (University of Cambridge) (submittedVersion, cc-by)
Funders
  • National Natural Science Foundation of China (2016YFA0301300, 11304102)
  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
  • Ministério da Educação
  • National Institute of Standards and Technology (70NANB10H193)
  • Engineering and Physical Sciences Research Council (EP/P001343/1)
  • Center for Nanoscale Science and Technology (70NANB10H193)
Topics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Semiconductor Quantum Structures and Devices
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photonic Crystals and Applications
Keywords
heterogeneous integration, quantum photonic circuits, single quantum emitters, InAs/GaAs quantum dots, GaAs waveguides, silicon nitride waveguides, microcavities, strong light-matter interaction, single-photon sources, deterministic quantum gates, strong coupling

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Heterogeneous integration for on-chip quantum photonic circuits with single quantum dot devices. https://app.cochat.ai/papers/10.1038/s41467-017-00987-6
The paper
Davanco, M., Liu, J., Sapienza, L., Zhang, C.-Z., De Miranda Cardoso, J. V., Verma, V., Mirin, R., Nam, S. W., Liu, L., & Srinivasan, K. (2017). Heterogeneous integration for on-chip quantum photonic circuits with single quantum dot devices. Nature Communications. https://doi.org/10.1038/s41467-017-00987-6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.