Mechanochemical mineralization of “very persistent” fluorocarbon surfactants ‒ 6:2 fluorotelomer sulfonate (6:2FTS) as an example
Open accessThe DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
Fluorinated organic chemicals have a wide variety of industrial and consumer applications. For long time perfluorooctane sulfonate and perfluorooctanoic acid have been used as precursors for manufacture of such chemicals. However, these C 8 chain compounds have been demonstrated to be toxic, persistent, and bioaccumulative, thus inducing their phase-out. Currently, C 6 telomer based fluorocarbon surfactants are considered better alternatives to C 8 products because of their low bioaccumulability. But, their high persistency suggests that in the near future their concentrations will increase in the environment and in industrial waste. Being a solid state non-thermal technology, mechanochemical treatment is a good candidate for the destruction of emerging C 6 fluorotelomers in solid waste. In the present study, 6:2 fluorotelomer sulfonate is effectively destroyed (~100%) in rapid manner (<1 h) by high energy ball milling with KOH. Stoichiometric fluoride formation confirms its entire mineralization, assuring that no toxic by-products are generated. Reaction mechanism and kinetics indicate that effective mineralization of the perfluorinated moiety is obtained thanks to a rapid CF 2 “flake-off” process through radical mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Buck, R. C., Franklin, J., Berger, U., Conder, J. M., Cousins, I. T., de Voogt, P., Jensen, A. A., Kannan, K., Mabury, S. A., & van Leeuwen, S. P. (2011) · Integrated Environmental Assessment and Management · doi:10.1002/ieam.258 · Cited by 4,641
A Never-Ending Story of Per- and Polyfluoroalkyl Substances (PFASs)?
Wang, Z., DeWitt, J. C., Higgins, C. P., & Cousins, I. T. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.6b04806 · Cited by 1,921
Wang, Z., Cousins, I. T., Scheringer, M., & Hungerbühler, K. (2013) · Environment International · doi:10.1016/j.envint.2013.08.021 · Cited by 924
Persistence of Perfluoroalkyl Acid Precursors in AFFF-Impacted Groundwater and Soil
Houtz, E. F., Higgins, C. P., Field, J. A., & Sedlak, D. L. (2013) · Environmental Science & Technology · doi:10.1021/es4018877 · Cited by 849
Identification of Novel Fluorochemicals in Aqueous Film-Forming Foams Used by the US Military
Place, B. J., & Field, J. A. (2012) · Environmental Science & Technology · doi:10.1021/es301465n · Cited by 543
Wang, N., Liu, J., Buck, R. C., Korzeniowski, S. H., Wolstenholme, B. W., Folsom, P. W., & Sulecki, L. M. (2011) · Chemosphere · doi:10.1016/j.chemosphere.2010.11.003 · Cited by 333
Cousins, I. T., Vestergren, R., Wang, Z., Scheringer, M., & McLachlan, M. S. (2016) · Environment International · doi:10.1016/j.envint.2016.04.044 · Cited by 225
PFOS and PFC releases and associated pollution from a PFC production plant in Minnesota (USA)
Oliaei, F., Kriens, D., Weber, R., & Watson, A. (2013) · Environmental Science and Pollution Research · doi:10.1007/s11356-012-1275-4 · Cited by 188 · cited 3×
“Specifically, the above-described mechanism is condensed into the following chemical reactions: Dehydrofluorination-fragmentation (DHF) → + +− −6: 2FTS C F OH C H FSO F (1) k 5 11 3 3 3 DHF Flake-off mineralization (FOM) → + +− −C F OH C F OH 2F HCOO (2) k 5 11 4 9 FOM → + +− −C F OH CF OH 2F HCOO (3) k 2 5 3 FOM CF3…”
InfluentialQuantitative determination of fluorochemicals in municipal landfill leachates
Huset, C. A., Barlaz, M. A., Barofsky, D. F., & Field, J. A. (2011) · Chemosphere · doi:10.1016/j.chemosphere.2010.11.072 · Cited by 184
Yang, X., Huang, J., Zhang, K., Yu, G., Deng, S., & Wang, B. (2014) · Environmental Science and Pollution Research · doi:10.1007/s11356-013-2389-z · Cited by 115
Self-citation
Cited by
Bentel, M. J., Yu, Y., Xu, L., Li, Z., Wong, B. M., Men, Y., & Liu, J. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.8b06648 · Cited by 648
Bolan, N., Sarkar, B., Yan, Y., Li, Q., Wijesekara, H., Kannan, K., Tsang, D. C. W., Schauerte, M., Bosch, J., Noll, H., et al. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123892 · Cited by 375
Recent Advances on PFAS Degradation via Thermal and Nonthermal Methods
Verma, S., Lee, T., Sahle-Demessie, E., Ateia, M., & Nadagouda, M. N. (2023) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2022.100421 · Cited by 187
Managing and treating per‐ and polyfluoroalkyl substances (PFAS) in membrane concentrates
Tow, E. W., Ersan, M. S., Kum, S., Lee, T., Speth, T. F., Owen, C., Bellona, C., Nadagouda, M. N., Mikelonis, A. M., Westerhoff, P., et al. (2021) · AWWA Water Science · doi:10.1002/aws2.1233 · Cited by 146
“…time, operating temperature, mixing/turbulence, and presence of excess oxygen) or addition of coadditives (CaO, ZVI, KOH, Al2O3, La2O3, Na2FeO4, Na2S2O8, etc.) are also important (Cagnetta et al., 2017; Deng et al., 2020; Lu et al., 2017; Lv et al., 2018; Wang et al., 2013; Wang, Lu, et al., 2015).”
BackgroundFilho, A. H. D. S., & de Souza, G. L. C. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/d0cp02445g · Cited by 43
Metadata
- Authors
- Lu, M., Cagnetta, G., Zhang, K., Huang, J., & Yu, G.
- Venue
- Scientific Reports
- Published
- 2017-12-07
- Volume
- 7
- Issue
- 1
- Pages
- 17180-17180
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2772960053
- Cited by
- 83
- References
- 11
- FWCI
- 1.70
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanochemical mineralization of “very persistent” fluorocarbon surfactants ‒ 6:2 fluorotelomer sulfonate (6:2FTS) as an example. https://app.cochat.ai/papers/10.1038/s41598-017-17515-7
- The paper
- Lu, M., Cagnetta, G., Zhang, K., Huang, J., & Yu, G. (2017). Mechanochemical mineralization of “very persistent” fluorocarbon surfactants ‒ 6:2 fluorotelomer sulfonate (6:2FTS) as an example. Scientific Reports. https://doi.org/10.1038/s41598-017-17515-7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.