Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 71 of the 75 references it cites were found in a registry or an index.

Superconducting nanowire single-photon detectors integrated with tantalum pentoxide waveguides

Open access

Abstract

Photonic integrated circuits hold great potential for realizing quantum technology. Efficient single-photon detectors are an essential constituent of any such quantum photonic implementation. In this regard waveguide-integrated superconducting nanowire single-photon detectors are an ideal match for achieving advanced photon counting capabilities in photonic integrated circuits. However, currently considered material systems do not readily satisfy the demands of next generation nanophotonic quantum technology platforms with integrated single-photon detectors, in terms of refractive-index contrast, band gap, optical nonlinearity, thermo-optic stability and fast single-photon counting with high signal-to-noise ratio. Here we show that such comprehensive functionality can be realized by integrating niobium titanium nitride superconducting nanowire single-photon detectors with tantalum pentoxide waveguides. We demonstrate state-of-the-art detector performance in this novel material system, including devices showing 75% on-chip detection efficiency at tens of dark counts per second, detector decay times below 1 ns and sub-30 ps timing accuracy for telecommunication wavelengths photons at 1550 nm. Notably, we realize saturation of the internal detection efficiency over a previously unattained bias current range for waveguide-integrated niobium titanium nitride superconducting nanowire single-photon detectors. Our work enables the full set of high-performance single-photon detection capabilities on the emerging tantalum pentoxide-on-insulator platform for future applications in integrated quantum photonics.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41598-020-74426-w

Cites

71 of 71 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 (a) Nanophotonic circuit for characterization of the SNSPD. Two grating couplers are used for the alignment and calibration of the chip inside the cryostat, with input power port Pin and output power port Pout. A multi-mode interference device serves as an optical power splitter of the incoming light. (b) Scanning electron micrograph (false color) of a fabricated Ta2O5 SNSPD device. The length of the nanowire, lnw, is equal to approximately twice the detector length, ldet. (c) Illustration of a supported TE00 mode inside the tantalum pentoxide waveguide on an insulating silicon dioxide on silicon substrate with the niobium titanium nitride nanowire and hydrogen silsesquioxane resist on-top (simulated using the finite element method). The gap between the NbTiN nanowires is 150 nm.
Figure 1 (a) Nanophotonic circuit for characterization of the SNSPD. Two grating couplers are used for the alignment and calibration of the chip inside the cryostat, with input power port Pin and output power port Pout. A multi-mode interference device serves as an optical power splitter of the incoming light. (b) Scanning electron micrograph (false color) of a fabricated Ta2O5 SNSPD device. The length of the nanowire, lnw, is equal to approximately twice the detector length, ldet. (c) Illustration of a supported TE00 mode inside the tantalum pentoxide waveguide on an insulating silicon dioxide on silicon substrate with the niobium titanium nitride nanowire and hydrogen silsesquioxane resist on-top (simulated using the finite element method). The gap between the NbTiN nanowires is 150 nm.CC BY · PubMed Central
Figure 2 (a) On-chip detection efficiency of the Ta2O5 waveguide-integrated NbTiN SNSPD with 90 nm wide nanowires of 10 µm (blue), 30 µm (yellow), 50 µm (red) and 70 µm (green) detector length and (b) their corresponding dark count rate versus the normalized bias current relative to the respective experimental critical current. (c) Relative saturation plateau width of Ta2O5 waveguide-integrated NbTiN SNSPDs using the definition in Eq. (2) (see main text) for 30 µm (blue), 50 µm (red) detector length.
Figure 2 (a) On-chip detection efficiency of the Ta2O5 waveguide-integrated NbTiN SNSPD with 90 nm wide nanowires of 10 µm (blue), 30 µm (yellow), 50 µm (red) and 70 µm (green) detector length and (b) their corresponding dark count rate versus the normalized bias current relative to the respective experimental critical current. (c) Relative saturation plateau width of Ta2O5 waveguide-integrated NbTiN SNSPDs using the definition in Eq. (2) (see main text) for 30 µm (blue), 50 µm (red) detector length.CC BY · PubMed Central
Figure 3 (a) Average of 10 k oscilloscope traces of the electrical response of waveguide-integrated SNSPDs for 90 nm wide nanowires of 10 µm (blue), 30 µm (yellow), 50 µm (red) and 70 µm (green) detector length. Fits to the data are calculated using Eq. (3) (see main text). (b) The suppressed number of squares, which are switching to the normal conducting state, versus kinetic inductance for SNSPDs with different lengths. (c) The internal quantum efficiency (IQE), as calculated by dividing the OCDE (see Fig. 2a) by the absorption efficiency (see main text), versus the calculated suppressed number of squares.
Figure 3 (a) Average of 10 k oscilloscope traces of the electrical response of waveguide-integrated SNSPDs for 90 nm wide nanowires of 10 µm (blue), 30 µm (yellow), 50 µm (red) and 70 µm (green) detector length. Fits to the data are calculated using Eq. (3) (see main text). (b) The suppressed number of squares, which are switching to the normal conducting state, versus kinetic inductance for SNSPDs with different lengths. (c) The internal quantum efficiency (IQE), as calculated by dividing the OCDE (see Fig. 2a) by the absorption efficiency (see main text), versus the calculated suppressed number of squares.CC BY · PubMed Central
Figure 4 Histogram of temporal variations in the latency between the arrival of a photon at the nanowire and a corresponding electrical detector output pulse (jitter measurement) for an SNSPD with a detector length of 30 µm and a 110 nm wide nanowire. A fit to the data with a Gaussian function reveals a FWHM of (27.8±0.1)ps. Inset: Dependence of the FWHM jitter value on bias current for several SNSPDs with varying geometry, resulting in different detector critical currents. Each device was biased at 90% of the experimental critical current. A fit to the data reveals a 1/Ibias-dependence of the jitter, indicating a large contribution from the electrical readout circuit.
Figure 4 Histogram of temporal variations in the latency between the arrival of a photon at the nanowire and a corresponding electrical detector output pulse (jitter measurement) for an SNSPD with a detector length of 30 µm and a 110 nm wide nanowire. A fit to the data with a Gaussian function reveals a FWHM of (27.8±0.1)ps. Inset: Dependence of the FWHM jitter value on bias current for several SNSPDs with varying geometry, resulting in different detector critical currents. Each device was biased at 90% of the experimental critical current. A fit to the data reveals a 1/Ibias-dependence of the jitter, indicating a large contribution from the electrical readout circuit.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 75 references

Cited by

See all 33

Metadata

Authors
Wolff, M. A., Vogel, S., Splitthoff, L., & Schuck, C.
Affiliations
University of Münster (DE)
Corresponding author
Schuck, Carsten
Venue
Scientific Reports
Published
2020-10-13
Volume
10
Issue
1
Pages
17170-17170
ISSN
2045-2322 (ISSN-L)
OpenAlex
W3092228807
Cited by
33
References
75
Citations by year
2026: 3 · 2025: 4 · 2024: 7 · 2023: 7 · 2022: 4 · 2021: 6 · 2020: 2
FWCI
2.12
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • URN:NBN Resolver for Germany & Switzerland (German National Library) (submittedVersion, cc-by)
  • Universitäts- und Landesbibliothek Münster (cc-by)
Funders
  • Ministerium für Kultur und Wissenschaft des Landes Nordrhein-Westfalen (421-8.03.03.02 - 130428)
  • Projekt DEAL
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Superconducting and THz Device Technology
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Quantum Information and Cryptography
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photorefractive and Nonlinear Optics
Keywords
superconducting nanowire single-photon detectors, photonic integrated circuits, quantum photonics, detection efficiency, dark counts, timing jitter, 1550 nm telecommunication wavelength

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Superconducting nanowire single-photon detectors integrated with tantalum pentoxide waveguides. https://app.cochat.ai/papers/10.1038/s41598-020-74426-w
The paper
Wolff, M. A., Vogel, S., Splitthoff, L., & Schuck, C. (2020). Superconducting nanowire single-photon detectors integrated with tantalum pentoxide waveguides. Scientific Reports. https://doi.org/10.1038/s41598-020-74426-w

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.