The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Light-based vat-polymerization bioprinting
Open accessAbstract
Light-based vat-polymerization bioprinting enables computer-aided patterning of 3D cell-laden structures in a point-by-point, layer-by-layer or volumetric manner, using vat (vats) filled with photoactivatable bioresin (bioresins). This collection of technologies — divided by their modes of operation into stereolithography, digital light processing and volumetric additive manufacturing — has been extensively developed over the past few decades, leading to broad applications in biomedicine. In this Primer, we illustrate the methodology of light-based vat-polymerization 3D bioprinting from the perspectives of hardware, software and bioresin selections. We follow with discussions on methodological variations of these technologies, including their latest advancements, as well as elaborating on key assessments utilized towards ensuring qualities of the bioprinting procedures and products. We conclude by providing insights into future directions of light-based vat-polymerization methods. Light-based vat-polymerization bioprinting is used to create 3D cell-laden structures via vats filled with photoactivatable bioresins. In this Primer, Levato et al. discuss the experimental design for point-by-point, layer-by-layer and volumetric variations of the technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Photodegradable Hydrogels for Dynamic Tuning of Physical and Chemical Properties
Kloxin, A. M., Kasko, A. M., Salinas, C. N., & Anseth, K. S. (2009) · Science · doi:10.1126/science.1169494 · Cited by 1,748
Self-citationPrintability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359 · cited 3×
“In all light-based vat-polymerization techniques, printability and resolution are intimately dependent on the kinetics of the photocrosslinking reaction and therefore unique for each bioresin formulation 84 .”
Self-citation3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T. (2019) · Advanced Science · doi:10.1002/advs.201900344 · Cited by 1,042
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641 · cited 1×
“…bioprinters use light-emitting diode arrays that directly emit patterned light 27 via liquid-crystal display screens that form digital masks in front of the light source to achieve patterned light 28 or digital micromirror array devices (DMDs) that reflect incident light to build patterns 29–31 .”
Self-citationMa, X., Yu, C., Wang, P., Xu, W., Wan, X., Lai, C. S. E., Liu, J., Koroleva-Maharajh, A., & Chen, S. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.09.026 · Cited by 281
Self-citationOvsianikov, A., Mironov, V., Stampfl, J., & Liska, R. (2012) · Expert Review of Medical Devices · doi:10.1586/erd.12.48 · Cited by 160
Programmable and contractile materials through cell encapsulation in fibrous hydrogel assemblies
Davidson, M. D., Prendergast, M. E., Ban, E., Xu, K. L., Mickel, G., Mensah, P., Dhand, A., Janmey, P. A., Shenoy, V. B., & Burdick, J. A. (2021) · Science Advances · doi:10.1126/sciadv.abi8157 · Cited by 101
3D printing a biocompatible elastomer for modeling muscle regeneration after volumetric muscle loss
Kiratitanaporn, W., Berry, D. B., Mudla, A., Fried, T., Lao, A., Yu, C., Hao, N., Ward, S. R., & Chen, S. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213171 · Cited by 20
Self-citation
Cited by
Lou, X., Zhou, Q., Dong, Z., Bai, L., Su, J., & Yue, H. (2025) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2025.07.010 · Cited by 17
Metadata
- Authors
- Levato, R., Dudaryeva, O., Garciamendez-Mijares, C. E., Kirkpatrick, B. E., Rizzo, R., Schimelman, J., Anseth, K. S., Chen, S., Zenobi-Wong, M., & Zhang, Y. S.
- Venue
- Nature Reviews Methods Primers
- Published
- 2023-06-22
- Volume
- 3
- Issue
- 1
- ISSN
- 2662-8449 (ISSN-L)
- OpenAlex
- W4381615795
- Cited by
- 176
- References
- 10
- FWCI
- 5.18
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Light-based vat-polymerization bioprinting. https://app.cochat.ai/papers/10.1038/s43586-023-00231-0
- The paper
- Levato, R., Dudaryeva, O., Garciamendez-Mijares, C. E., Kirkpatrick, B. E., Rizzo, R., Schimelman, J., Anseth, K. S., Chen, S., Zenobi-Wong, M., & Zhang, Y. S. (2023). Light-based vat-polymerization bioprinting. Nature Reviews Methods Primers. https://doi.org/10.1038/s43586-023-00231-0
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.