The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
3D-Printed Microfluidic Device for the Detection of Pathogenic Bacteria Using Size-based Separation in Helical Channel with Trapezoid Cross-Section
Open accessAbstract
A facile method has been developed to detect pathogenic bacteria using magnetic nanoparticle clusters (MNCs) and a 3D-printed helical microchannel. Antibody-functionalized MNCs were used to capture E. coli (EC) bacteria in milk, and the free MNCs and MNC-EC complexes were separated from the milk using a permanent magnet. The free MNCs and MNC-EC complexes were dispersed in a buffer solution, then the solution was injected into a helical microchannel device with or without a sheath flow. The MNC-EC complexes were separated from the free MNCs via the Dean drag force and lift force, and the separation was facilitated in the presence of a sheath flow. The concentration of the E. coli bacteria was determined using a light absorption spectrometer, and the limit of detection was found to be 10 cfu/mL in buffer solution and 100 cfu/mL in milk.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Continuous inertial focusing, ordering, and separation of particles in microchannels
Di Carlo, D., Irimia, D., Tompkins, R. G., & Toner, M. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0704958104 · Cited by 1,708
Isolation and retrieval of circulating tumor cells using centrifugal forces
Hou, H. W., Warkiani, M. E., Khoo, B. L., Li, Z. R., Soo, R. A., Tan, D. S.-W., Lim, W.-T., Han, J., Bhagat, A. A. S., & Lim, C. T. (2013) · Scientific Reports · doi:10.1038/srep01259 · Cited by 736
Continuous particle separation in spiral microchannels using dean flows and differential migration
Bhagat, A. A. S., Kuntaegowdanahalli, S. S., & Papautsky, I. (2008) · Lab on a Chip · doi:10.1039/b807107a · Cited by 656
Advances in biosensors for detection of pathogens in food and water
Leonard, P., Hearty, S., Brennan, J., Dunne, L., Quinn, J. G., Chakraborty, T., & O’Kennedy, R. J. (2002) · Enzyme and Microbial Technology · doi:10.1016/s0141-0229(02)00232-6 · Cited by 605
Slanted spiral microfluidics for the ultra-fast, label-free isolation of circulating tumor cells
Warkiani, M. E., Guan, G., Luan, K. B., Lee, W. C., Bhagat, A. A. S., Kant Chaudhuri, P., Tan, D. S.-W., Lim, W. T., Lee, S. C., Chen, P. C. Y., et al. (2014) · Lab Chip · doi:10.1039/c3lc50617g · Cited by 573
Self-citationCharacterization of the Surface Enhanced Raman Scattering (SERS) of Bacteria
Premasiri, W. R., Moir, D. T., Klempner, M. S., Krieger, N., Jones, G., & Ziegler, L. D. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp040442n · Cited by 489
Detection of Bacteria with Carbohydrate-Functionalized Fluorescent Polymers
Disney, M. D., Zheng, J., Swager, T. M., & Seeberger, P. H. (2004) · Journal of the American Chemical Society · doi:10.1021/ja047936i · Cited by 457
Critical particle size for fractionation by deterministic lateral displacement
Inglis, D. W., Davis, J. A., Austin, R. H., & Sturm, J. C. (2006) · Lab on a Chip · doi:10.1039/b515371a · Cited by 421
Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices
Au, A. K., Lee, W., & Folch, A. (2014) · Lab Chip · doi:10.1039/c3lc51360b · Cited by 380
Self-citationCharacterisation and identification of bacteria using SERS
Jarvis, R. M., & Goodacre, R. (2008) · Chemical Society Reviews · doi:10.1039/b705973f · Cited by 371
Continuous scalable blood filtration device using inertial microfluidics
Mach, A. J., & Di Carlo, D. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22833 · Cited by 334
Synthetic Ligand-Coated Magnetic Nanoparticles for Microfluidic Bacterial Separation from Blood
Lee, J.-J., Jeong, K. J., Hashimoto, M., Kwon, A. H., Rwei, A., Shankarappa, S. A., Tsui, J. H., & Kohane, D. S. (2014) · Nano Letters · doi:10.1021/nl3047305 · Cited by 258
Gao, J., Li, L., Ho, P. ‐., Mak, G. C., Gu, H., & Xu, B. (2006) · Advanced Materials · doi:10.1002/adma.200601058 · Cited by 171
Park, J.-S., & Jung, H. (2009) · Analytical Chemistry · doi:10.1021/ac9005765 · Cited by 155
Hobson, N. S., Tothill, I. E., & Turner, A. P. F. (1996) · Biosensors and Bioelectronics · doi:10.1016/0956-5663(96)86783-2 · Cited by 142
Low cost lab-on-a-chip prototyping with a consumer grade 3D printer
Cómina, G., Suska, A., & Filippini, D. (2014) · Lab on a Chip · doi:10.1039/c4lc00394b · Cited by 136
Shen, Z., Wang, J., Qiu, Z., Jin, M., Wang, X., Chen, Z., Li, J., & Cao, F.-H. (2010) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2010.12.035 · Cited by 126
Comparison of sensing strategies in SPR biosensor for rapid and sensitive enumeration of bacteria
Torun, Ö., Boyacı, İ. H., Temür, E., & Tamer, U. (2012) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2012.04.034 · Cited by 124
Skowronek, V., Rambach, R. W., Schmid, L., et al. (2013) · Analytical Chemistry · doi:10.1021/ac402607p · Cited by 122
Ultrarapid Detection of Pathogenic Bacteria Using a 3D Immunomagnetic Flow Assay
Lee, W., Kwon, D., Chung, B., Jung, G. Y., Au, A. K., Folch, A., & Jeon, S. (2014) · Analytical Chemistry · doi:10.1021/ac501436d · Cited by 117
Self-citationKim, U., & Soh, H. T. (2009) · Lab on a Chip · doi:10.1039/b903950c · Cited by 105
Cited by
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Self-citation3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
Optical Biosensors for the Detection of Pathogenic Microorganisms
Yoo, S. M., & Lee, S. Y. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.09.012 · Cited by 571
Additive manufacturing of medical instruments: A state-of-the-art review
Culmone, C., Smit, G., & Breedveld, P. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.015 · Cited by 371
Recent Advances in Analytical Chemistry by 3D Printing
Gross, B., Lockwood, S. Y., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04344 · Cited by 359
Metadata
- Authors
- Lee, W., Kwon, D., Choi, W., Jung, G. Y., Au, A. K., Folch, A., & Jeon, S.
- Venue
- Scientific Reports
- Published
- 2015-01-12
- Volume
- 5
- Issue
- 1
- Pages
- 7717-7717
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2024021474
- Cited by
- 300
- References
- 21
- FWCI
- 19.03
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.