CoChat

Evidence of Filamentary Switching in Oxide-based Memory Devices via Weak Programming and Retention Failure Analysis

Open access
Younis, Adnan, Chu, Dewei, Li, Sean · 2015 · Scientific Reports

The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.

Abstract

Further progress in high-performance microelectronic devices relies on the development of novel materials and device architectures. However, the components and designs that are currently in use have reached their physical limits. Intensive research efforts, ranging from device fabrication to performance evaluation, are required to surmount these limitations. In this paper, we demonstrate that the superior bipolar resistive switching characteristics of a CeO 2:Gd-based memory device can be manipulated by means of UV radiation, serving as a new degree of freedom. Furthermore, the metal oxide-based (CeO 2:Gd) memory device was found to possess electrical and neuromorphic multifunctionalities. To investigate the underlying switching mechanism of the device, its plasticity behaviour was studied by imposing weak programming conditions. In addition, a short-term to long-term memory transition analogous to the forgetting process in the human brain, which is regarded as a key biological synaptic function for information processing and data storage, was realized. Based on a careful examination of the device’s retention behaviour at elevated temperatures, the filamentary nature of switching in such devices can be understood from a new perspective.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/srep13599

Cites

35 of 35 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Typical bipolar non-volatile RS characteristics of the CeO2:Gd-based memory device. (a) I-V curve in semi-logarithmic scale under dark conditions (blue curve) and under UV irradiation (pink curve). (b–c) magnified images of low-resistance and high-resistance states. (d) Endurance performance of the memory device under UV irradiation over more than 104 switching cycles. (e) Distributions of threshold voltages (VON and VOFF) over 50 consecutive switching cycles.
Figure 1 Typical bipolar non-volatile RS characteristics of the CeO2:Gd-based memory device. (a) I-V curve in semi-logarithmic scale under dark conditions (blue curve) and under UV irradiation (pink curve). (b–c) magnified images of low-resistance and high-resistance states. (d) Endurance performance of the memory device under UV irradiation over more than 104 switching cycles. (e) Distributions of threshold voltages (VON and VOFF) over 50 consecutive switching cycles.CC BY · PubMed Central
Figure 2 Device performance evaluation based on monitoring of its (a) programming and (b) erasing characteristics with and without the application of UV irradiation.
Figure 2 Device performance evaluation based on monitoring of its (a) programming and (b) erasing characteristics with and without the application of UV irradiation.CC BY · PubMed Central
Figure 3 Volatile and non-volatile memory performance of a CeO2:Gd device. The current change was observed by applying a sequence of positive voltage pulses with a width of 0.1 s at intervals of 8 seconds s. The read voltage was 0.1 V.
Figure 3 Volatile and non-volatile memory performance of a CeO2:Gd device. The current change was observed by applying a sequence of positive voltage pulses with a width of 0.1 s at intervals of 8 seconds s. The read voltage was 0.1 V.CC BY · PubMed Central
Figure 4 Measurement of pulse relaxation behaviour over a certain period of time. Bursts of varying numbers of pulses (0.8 V) (a) 10 pulses, (b) 25 pulses, and (c) 45 pulses — were imposed on the memory device to induce potentiation, and the corresponding current relaxation times were measured at a low read voltage of 0.1 V. (d) The same curves re-plotted on a 30 s time scale to emphasize the short-term to long-term memory transformation.
Figure 4 Measurement of pulse relaxation behaviour over a certain period of time. Bursts of varying numbers of pulses (0.8 V) (a) 10 pulses, (b) 25 pulses, and (c) 45 pulses — were imposed on the memory device to induce potentiation, and the corresponding current relaxation times were measured at a low read voltage of 0.1 V. (d) The same curves re-plotted on a 30 s time scale to emphasize the short-term to long-term memory transformation.CC BY · PubMed Central
Figure 5 Evidence of the filament dissolution process through measurements of the temperature-dependant retention versus time. The device exhibited excellent data retention up to 100 °C when operating under both dark and irradiated conditions. However, data retention failure was clearly observed at elevated temperatures both (a) under dark conditions and (b) under UV irradiation. A read pulse (0.1 V/10 ms) was applied every 5 s during the test.
Figure 5 Evidence of the filament dissolution process through measurements of the temperature-dependant retention versus time. The device exhibited excellent data retention up to 100 °C when operating under both dark and irradiated conditions. However, data retention failure was clearly observed at elevated temperatures both (a) under dark conditions and (b) under UV irradiation. A read pulse (0.1 V/10 ms) was applied every 5 s during the test.CC BY · PubMed Central
Figure 6 The generation and annihilation of conducting filaments under various conditions. (a) The formation of a single filament, in the absence of UV exposure, under an applied positive potential. (b) UV exposure causes an increase in the OB concentration on or near the GDC film surface. (c) The formation of multiple conducting filaments under the combination of UV irradiation and a positive potential, increasing the current level of the low-resistance state (d) The annihilation/rupture of conducting filaments as a consequence of an applied negative potential.
Figure 6 The generation and annihilation of conducting filaments under various conditions. (a) The formation of a single filament, in the absence of UV exposure, under an applied positive potential. (b) UV exposure causes an increase in the OB concentration on or near the GDC film surface. (c) The formation of multiple conducting filaments under the combination of UV irradiation and a positive potential, increasing the current level of the low-resistance state (d) The annihilation/rupture of conducting filaments as a consequence of an applied negative potential.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 35 references

Cited by

Metadata

Authors
Younis, A., Chu, D., & Li, S.
Affiliations
UNSW Sydney (AU)
Corresponding author
  • Younis, Adnan
  • Chu, Dewei
Venue
Scientific Reports
Published
2015-09-01
Volume
5
Issue
1
Pages
13599-13599
ISSN
2045-2322 (ISSN-L)
OpenAlex
W1251868664
Cited by
50
References
35
Citations by year
2026: 7 · 2025: 2 · 2024: 4 · 2023: 7 · 2022: 1 · 2021: 3 · 2020: 8 · 2019: 5 · 2018: 4 · 2017: 3 · 2016: 6
FWCI
2.09
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • UNSWorks (UNSW Sydney) (submittedVersion, cc-by)
  • UNSWorks (University of New South Wales, Sydney, Australia) (submittedVersion, cc-by)
Funders
  • University of New South Wales (DP140104373, DP150103006)
  • Australian Research Council (DP140104373, DP150103006., FT140100032, DP140104373, DP150103006)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
  • Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
Keywords
filamentary switching, resistive switching, retention failure, neuromorphic hardware, synaptic plasticity, bipolar resistive switching

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.