The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Printability of alloys for additive manufacturing
Open accessAbstract
Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Recommended Values of Thermophysical Properties for Selected Commercial Alloys
Mills, K. C. (2002) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845690144 · Cited by 1,722
Steen, W. M. (1998) · Springer eBooks · doi:10.1007/978-1-4471-3609-5 · Cited by 1,547
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Steen, W. M., & Mazumder, J. (2010) · Springer eBooks · doi:10.1007/978-1-84996-062-5 · Cited by 907
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Self-citationSanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
An improved prediction of residual stresses and distortion in additive manufacturing
Mukherjee, T., Zhang, W., & DebRoy, T. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2016.10.003 · Cited by 812
Self-citationState of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Dass, A., & Moridi, A. (2019) · Coatings · doi:10.3390/coatings9070418 · Cited by 667
Zhu, Z. G., Nguyen, Q. B., Ng, F. L., An, X. H., Liao, X. Z., Liaw, P. K., Nai, S. M. L., & Wei, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.05.015 · Cited by 653
An overview of residual stresses in metal powder bed fusion
Bartlett, J. L., & Li, X. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.02.020 · Cited by 616
Jafari, D., Vaneker, T. H. J., & Gibson, I. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109471 · Cited by 605
Scientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
Self-citationMostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Self-citationMetallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
Self-citationDefects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Building blocks for a digital twin of additive manufacturing
Knapp, G. L., Mukherjee, T., Zuback, J. S., Wei, H. L., Palmer, T. A., De, A., & DebRoy, T. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.039 · Cited by 414
Self-citationMetal additive manufacturing: Technology, metallurgy and modelling
Cooke, S., Ahmadi, K., Willerth, S., & Herring, R. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.07.025 · Cited by 378
A digital twin for rapid qualification of 3D printed metallic components
Mukherjee, T., & DebRoy, T. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2018.11.003 · Cited by 339
Self-citationXu, Z., Zhang, H., Du, X., He, Y., Luo, H., Song, G., Mao, L., Zhou, T., & Wang, L. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108954 · Cited by 308
Synaptic devices based neuromorphic computing applications in artificial intelligence
Sun, B., Guo, T., Zhou, G., Ranjan, S., Jiao, Y., Wei, L., Zhou, Y. N., & Wu, Y. A. (2021) · Materials Today Physics · doi:10.1016/j.mtphys.2021.100393 · Cited by 275
Mukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101153 · Cited by 267
Self-citationEffects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography
du Plessis, A. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100871 · Cited by 264
Building digital twins of 3D printing machines
DebRoy, T., Zhang, W., Turner, J., & Babu, S. S. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.005 · Cited by 259
Self-citationMukherjee, T., Wei, H. L., De, A., & DebRoy, T. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.04.027 · Cited by 259
Self-citationOu, W., Mukherjee, T., Knapp, G. L., Wei, Y., & DebRoy, T. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.111 · Cited by 257
Self-citationMitigation of lack of fusion defects in powder bed fusion additive manufacturing
Mukherjee, T., & DebRoy, T. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.10.028 · Cited by 256
Self-citation
Metadata
- Authors
- Mukherjee, T., Zuback, J. S., De, A., & DebRoy, T.
- Venue
- Scientific Reports
- Published
- 2016-01-22
- Volume
- 6
- Issue
- 1
- Pages
- 19717-19717
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2409931141
- Cited by
- 523
- References
- 25
- FWCI
- 30.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.