The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Carbon nanotubes for lithium ion batteries
Abstract
Lithium ion batteries are receiving considerable attention in applications, ranging from portable electronics to electric vehicles, due to their superior energy density over other rechargeable battery technologies. However, the societal demands for lighter, thinner, and higher capacity lithium ion batteries necessitate ongoing research for novel materials with improved properties over that of state-of-the-art. Such an effort requires a concerted development of both electrodes and electrolyte to improve battery capacity, cycle life, and charge–discharge rates while maintaining the highest degree of safety available. Carbon nanotubes (CNTs) are a candidate material for use in lithium ion batteries due to their unique set of electrochemical and mechanical properties. The incorporation of CNTs as a conductive additive at a lower weight loading than conventional carbons, like carbon black and graphite, presents a more effective strategy to establish an electrical percolation network. In addition, CNTs have the capability to be assembled into free-standing electrodes (absent of any binder or current collector) as an active lithium ion storage material or as a physical support for ultra high capacity anode materials like silicon or germanium. The measured reversible lithium ion capacities for CNT-based anodes can exceed 1000 mAh g−1 depending on experimental factors, which is a 3× improvement over conventional graphite anodes. The major advantage from utilizing free-standing CNT anodes is the removal of the copper current collectors which can translate into an increase in specific energy density by more than 50% for the overall battery design. However, a developmental effort needs to overcome current research challenges including the first cycle charge loss and paper crystallinity for free-standing CNT electrodes. Efforts to utilize pre-lithiation methods and modification of the single wall carbon nanotube bundling are expected to increase the energy density of future CNT batteries. Other progress may be achieved using open-ended structures and enriched chiral fractions of semiconducting or metallic chiralities that are potentially able to improve capacity and electrical transport in CNT-based lithium ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Crystalline Ropes of Metallic Carbon Nanotubes
Thess, A., Lee, R., Nikolaev, P., Dai, H., Petit, P., Robert, J., Xu, C., Lee, Y. H., Kim, S. G., Rinzler, A. G., et al. (1996) · Science · doi:10.1126/science.273.5274.483 · Cited by 5,580
Band Gap Fluorescence from Individual Single-Walled Carbon Nanotubes
O'Connell, M. J., Bachilo, S. M., Huffman, C. B., Moore, V. C., Strano, M. S., Haroz, E. H., Rialon, K. L., Boul, P. J., Noon, W. H., Kittrell, C., et al. (2002) · Science · doi:10.1126/science.1072631 · Cited by 3,879
Unusually High Thermal Conductivity of Carbon Nanotubes
Berber, S., Kwon, Y.-K., & Tománek, D. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.4613 · Cited by 3,087
Structure-Assigned Optical Spectra of Single-Walled Carbon Nanotubes
Bachilo, S. M., Strano, M. S., Kittrell, C., Hauge, R. H., Smalley, R. E., & Weisman, R. B. (2002) · Science · doi:10.1126/science.1078727 · Cited by 3,078
Liu, J., Rinzler, A. G., Dai, H., Hafner, J. H., Bradley, R. K., Boul, P. J., Lu, A., Iverson, T., Shelimov, K., Huffman, C. B., et al. (1998) · Science · doi:10.1126/science.280.5367.1253 · Cited by 2,903
Optical properties of single-wall carbon nanotubes
Kataura, H., Kumazawa, Y., Maniwa, Y., Umezu, I., Suzuki, S., Ohtsuka, Y., & Achiba, Y. (1999) · Synthetic Metals · doi:10.1016/s0379-6779(98)00278-1 · Cited by 2,496
Sorting carbon nanotubes by electronic structure using density differentiation
Arnold, M. S., Green, A. A., Hulvat, J. F., Stupp, S. I., & Hersam, M. C. (2006) · Nature Nanotechnology · doi:10.1038/nnano.2006.52 · Cited by 2,251
Cited by
Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges
Baig, N., Kammakakam, I., & Falath, W. (2021) · Materials Advances · doi:10.1039/d0ma00807a · Cited by 3,262
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries
Ji, L., Lin, Z., Alcoutlabi, M., & Zhang, X. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00699h · Cited by 2,240
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
Qie, L., Chen, W., Wang, Z., Shao, Q., Li, X., Yuan, L., Hu, X., Zhang, W., & Huang, Y. (2012) · Advanced Materials · doi:10.1002/adma.201104634 · Cited by 1,656
Multidimensional materials and device architectures for future hybrid energy storage
Lukatskaya, M. R., Dunn, B., & Gogotsi, Y. (2016) · Nature Communications · doi:10.1038/ncomms12647 · Cited by 1,618
Progress in flexible lithium batteries and future prospects
Zhou, G., Li, F., & Cheng, H.-M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43182g · Cited by 1,498
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
Dang, Z., Yuan, J., Yao, S., & Liao, R. (2013) · Advanced Materials · doi:10.1002/adma.201301752 · Cited by 1,454
Lithium ion battery applications of molybdenum disulfide (MoS2) nanocomposites
Stephenson, T., Li, Z., Olsen, B., & Mitlin, D. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42591f · Cited by 1,322
Dimensional Design and Core–Shell Engineering of Nanomaterials for Electromagnetic Wave Absorption
Wu, Z., Cheng, H., Jin, C., Yang, B., Xu, C., Pei, K., Zhang, H., Yang, Z., & Che, R. (2022) · Advanced Materials · doi:10.1002/adma.202107538 · Cited by 1,059
Silicon‐Based Anodes for Lithium‐Ion Batteries: From Fundamentals to Practical Applications
Feng, K., Li, M., Liu, W., Kashkooli, A. G., Xiao, X., Cai, M., & Chen, Z. (2018) · Small · doi:10.1002/smll.201702737 · Cited by 1,042
Nanostructured carbon for energy storage and conversion
Candelaria, S. L., Shao, Y., Zhou, W., Li, X., Xiao, J., Zhang, J.-G., Wang, Y., Liu, J., Li, J., & Cao, G. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.11.006 · Cited by 975
Amine‐Assisted Delamination of Nb2C MXene for Li‐Ion Energy Storage Devices
Mashtalir, O., Lukatskaya, M. R., Zhao, M., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Materials · doi:10.1002/adma.201500604 · Cited by 954
Transition‐Metal (Fe, Co, Ni) Based Metal‐Organic Frameworks for Electrochemical Energy Storage
Zheng, S., Li, X., Yan, B., Hu, Q., Xu, Y., Xiao, X., Xue, H., & Pang, H. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602733 · Cited by 887
The role of nanomaterials in redox-based supercapacitors for next generation energy storage devices
Zhao, X., Sánchez, B. M., Dobson, P. J., & Grant, P. S. (2011) · Nanoscale · doi:10.1039/c0nr00594k · Cited by 882
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Recent Advancement of Nanostructured Carbon for Energy Applications
Yang, Z., Ren, J., Zhang, Z., Chen, X., Guan, G., Qiu, L., Zhang, Y., & Peng, H. (2015) · Chemical Reviews · doi:10.1021/cr5006217 · Cited by 810
Carbon nanotube catalysts: recent advances in synthesis, characterization and applications
Yan, Y., Miao, J., Yang, Z., Xiao, F.-X., Yang, H. B., Liu, B., & Yang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00492b · Cited by 798
Twisting Carbon Nanotube Fibers for Both Wire‐Shaped Micro‐Supercapacitor and Micro‐Battery
Ren, J., Li, L., Chen, C., Chen, X., Cai, Z., Qiu, L., Wang, Y., Zhu, X., & Peng, H. (2013) · Advanced Materials · doi:10.1002/adma.201203445 · Cited by 786
Zhang, Q., Huang, J., Qian, W., Zhang, Y., & Wei, F. (2013) · Small · doi:10.1002/smll.201203252 · Cited by 759
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
Lu, J., Chen, Z., Pan, F., Cui, Y., & Amine, K. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0001-4 · Cited by 695
A review of carbon materials and their composites with alloy metals for sodium ion battery anodes
Balogun, M.-S., Luo, Y., Qiu, W., Liu, P., & Tong, Y. (2016) · Carbon · doi:10.1016/j.carbon.2015.09.091 · Cited by 671
Porous Two‐Dimensional Transition Metal Carbide (MXene) Flakes for High‐Performance Li‐Ion Storage
Ren, C. E., Zhao, M., Makaryan, T., Halim, J., Boota, M., Kota, S., Anasori, B., Barsoum, M. W., & Gogotsi, Y. (2016) · ChemElectroChem · doi:10.1002/celc.201600059 · Cited by 625
Multi-electron reaction materials for high energy density batteries
Gao, X.-P., & Yang, H.-X. (2010) · Energy Environ. Sci. · doi:10.1039/b916098a · Cited by 624
The Regulating Role of Carbon Nanotubes and Graphene in Lithium‐Ion and Lithium–Sulfur Batteries
Fang, R., Chen, K., Yin, L., Sun, Z., Li, F., & Cheng, H. (2019) · Advanced Materials · doi:10.1002/adma.201800863 · Cited by 617
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Nanostructured transition metal sulfides for lithium ion batteries: Progress and challenges
Xu, X., Liu, W., Kim, Y., & Cho, J. (2014) · Nano Today · doi:10.1016/j.nantod.2014.09.005 · Cited by 614
Bridging the academic and industrial metrics for next-generation practical batteries
Cao, Y., Li, M., Lu, J., Liu, J., & Amine, K. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0371-8 · Cited by 612
Rao, R., Pint, C. L., Islam, A. E., Weatherup, R. S., Hofmann, S., Meshot, E. R., Wu, F., Zhou, C., Dee, N., Amama, P. B., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b06511 · Cited by 588
Zhao, Y., Wang, L. P., Sougrati, M. T., Feng, Z., Leconte, Y., Fisher, A., Srinivasan, M., & Xu, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601424 · Cited by 586
Xu, J., Dou, Y., Wei, Z., Ma, J., Deng, Y., Li, Y., Liu, H., & Dou, S. (2017) · Advanced Science · doi:10.1002/advs.201700146 · Cited by 550
Liu, X.-M., Huang, Z. D., Oh, S. W., Zhang, B., Ma, P.-C., Yuen, M. M. F., & Kim, J.-K. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.11.019 · Cited by 537
Liang, Z., Shen, J., Xu, X., Li, F., Liu, J., Yuan, B., Yu, Y., & Zhu, M. (2022) · Advanced Materials · doi:10.1002/adma.202200102 · Cited by 464
Qi, W., Shapter, J. G., Wu, Q., Yin, T., Gao, G., & Cui, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05283a · Cited by 445
Recent Advances in Carbon‐Based Electrodes for Energy Storage and Conversion
Kothandam, G., Singh, G., Guan, X., Lee, J. M., Ramadass, K., Joseph, S., Benzigar, M., Karakoti, A., Yi, J., Kumar, P., et al. (2023) · Advanced Science · doi:10.1002/advs.202301045 · Cited by 424
Nanocomposite hydrogel-based strain and pressure sensors: a review
Sun, X., Yao, F., & Li, J. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta06965e · Cited by 420
In Situ TEM Experiments of Electrochemical Lithiation and Delithiation of Individual Nanostructures
Liu, X. H., Liu, Y., Kushima, A., Zhang, S., Zhu, T., Li, J., & Huang, J. Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200024 · Cited by 408
Tin oxide for optoelectronic, photovoltaic and energy storage devices: a review
Dalapati, G. K., Sharma, H., Guchhait, A., Chakrabarty, N., Bamola, P., Liu, Q., Saianand, G., Sai Krishna, A. M., Mukhopadhyay, S., Dey, A., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta01291f · Cited by 406
Nanoscale Joule Heating and Electromigration Enhanced Ripening of Silver Nanowire Contacts
Song, T.-B., Chen, Y., Chung, C.-H., Yang, Y. (., Bob, B., Duan, H.-S., Li, G., Tu, K.-N., Huang, Y., & Yang, Y. (2014) · ACS Nano · doi:10.1021/nn4065567 · Cited by 399
Quilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Carbon-based functional nanomaterials: Preparation, properties and applications
Li, Z., Wang, L., Li, Y., Feng, Y., & Feng, W. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.04.028 · Cited by 384
Forney, M. W., Ganter, M. J., Staub, J. W., Ridgley, R. D., & Landi, B. J. (2013) · Nano Letters · doi:10.1021/nl401776d · Cited by 381
Self-citationNitrogen-doped graphene: Synthesis, characterizations and energy applications
Xu, H., Ma, L., & Jin, Z. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.12.006 · Cited by 381
Carbon Nanotube Assembly and Integration for Applications
Venkataraman, A., Amadi, E. V., Chen, Y., & Papadopoulos, C. (2019) · Nanoscale Research Letters · doi:10.1186/s11671-019-3046-3 · Cited by 351
Carbon‐Nanomaterial‐Based Flexible Batteries for Wearable Electronics
Wu, Z., Wang, Y., Liu, X., Lv, C., Li, Y., Wei, D., & Liu, Z. (2019) · Advanced Materials · doi:10.1002/adma.201800716 · Cited by 350
Ou, J., Zhang, Y., Chen, L., Zhao, Q., Meng, Y., Guo, Y., & Xiao, D. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06614f · Cited by 340
Na 3 V 2 (PO 4 ) 3 : an advanced cathode for sodium-ion batteries
Zhang, X., Rui, X., Chen, D., Tan, H., Yang, D., Huang, S., & Yu, Y. (2019) · Nanoscale · doi:10.1039/c8nr09391a · Cited by 336
Li, S., Luo, Y., Lv, W., Yu, W., Wu, S., Hou, P., Yang, Q., Meng, Q., Liu, C., & Cheng, H. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100001 · Cited by 336
Dall’Agnese, Y., Rozier, P., Taberna, P.-L., Gogotsi, Y., & Simon, P. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.036 · Cited by 331
Lin, H., Weng, W., Ren, J., Qiu, L., Zhang, Z., Chen, P., Chen, X., Deng, J., Wang, Y., & Peng, H. (2014) · Advanced Materials · doi:10.1002/adma.201304319 · Cited by 328
Biomass-based materials for green lithium secondary batteries
Jin, C., Nai, J., Sheng, O., Yuan, H., Zhang, W., Tao, X., & Lou, X. W. (. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02848g · Cited by 324
Prussian blue and its derivatives as electrode materials for electrochemical energy storage
Xu, Y., Zheng, S., Tang, H., Guo, X., Xue, H., & Pang, H. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.06.002 · Cited by 322
Carbon Nanomaterials in Different Dimensions for Electrochemical Energy Storage
Ni, J., & Li, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600278 · Cited by 304
Kraytsberg, A., & Ein‐Eli, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600655 · Cited by 299
Koga, H., Saito, T., Kitaoka, T., Nogi, M., Suganuma, K., & Isogai, A. (2013) · Biomacromolecules · doi:10.1021/bm400075f · Cited by 298
Recent Advances in Nanostructured Vanadium Oxides and Composites for Energy Conversion
Liu, M., Su, B., Tang, Y., Jiang, X., & Yu, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700885 · Cited by 293
Srivastava, S., Schaefer, J. L., Yang, Z., Tu, Z., & Archer, L. A. (2014) · Advanced Materials · doi:10.1002/adma.201303070 · Cited by 290
Wang, X., & Yushin, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01254f · Cited by 289
Evaluating the performance of nanostructured materials as lithium-ion battery electrodes
Armstrong, M. J., O’Dwyer, C., Macklin, W. J., & Holmes, J. D. (2014) · Nano Research · doi:10.1007/s12274-013-0375-x · Cited by 285
Organic small molecules and polymers as an electrode material for rechargeable lithium ion batteries
Bhosale, M. E., Chae, S., Kim, J. M., & Choi, J.-Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04906h · Cited by 279
Binder‐Free Electrodes for Advanced Sodium‐Ion Batteries
Jin, T., Han, Q., & Jiao, L. (2020) · Advanced Materials · doi:10.1002/adma.201806304 · Cited by 279
MOF derived metal oxide composites and their applications in energy storage
Zhou, W., Tang, Y., Zhang, X., Zhang, S., Xue, H., & Pang, H. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214949 · Cited by 278
Goh, P. S., Ismail, A. F., & Ng, B. C. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.001 · Cited by 260
Schütter, C., Pohlmann, S., & Balducci, A. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900334 · Cited by 260
Cobalt oxide-based nanoarchitectures for electrochemical energy applications
Mei, J., Liao, T., Ayoko, G. A., Bell, J., & Sun, Z. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.001 · Cited by 256
Li, F., Xie, L., Sun, G., Kong, Q., Su, F., Cao, Y., Wei, J., Ahmad, A., Guo, X., & Chen, C.-M. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.12.007 · Cited by 126
Metadata
- Authors
- Landi, B. J., Ganter, M. J., Cress, C. D., DiLeo, R. A., & Raffaelle, R. P.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2009
- Volume
- 2
- Issue
- 6
- Pages
- 638
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1966858105
- Cited by
- 1,229
- References
- 54
- FWCI
- 26.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.