The DOI matches its Crossref record; 195 of the 195 references it cites were found in a registry or an index.
Proton-conducting membranes based on benzimidazole polymers for high-temperature PEM fuel cells. A chemical quest
Abstract
The development of high-temperature PEM fuel cells (working at 150-200 degrees C) is pursued worldwide in order to solve some of the problems of current cells based on Nafion (CO tolerance, improved kinetics, water management, etc.). Polybenzimidazole membranes nanoimpregnated with phosphoric acid have been studied as electrolytes in PEMFCs for more than a decade. Commercially available polybenzimidazole (PBI) has been the most extensively studied and used for this application in membranes doped with all sorts of strong inorganic acids. In addition to this well-known polymer we also review here studies on ABPBI and other polybenzimidazole type membranes. More recently, several copolymers and related derivatives have attracted many researchers' attention, adding variety to the field. Furthermore, besides phosphoric acid, many other strong inorganic acids, as well as alkaline electrolytes have been used to impregnate benzimidazole membranes and are analyzed here. Finally, we also review different hybrid materials based on polybenzimidazoles and several inorganic proton conductors such as heteropoly acids, as well as sulfonated derivatives of the polymers, all of which contribute to a quickly-developing field with many blooming results and useful potential which are the subject of this critical review (317 references).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
Kreuer, K. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00632-3 · Cited by 2,969
Li, Q., He, R., Jensen, J. O., & Bjerrum, N. J. (2003) · Chemistry of Materials · doi:10.1021/cm0310519 · Cited by 1,689
Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers
Rikukawa, M., & Sanui, K. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00032-0 · Cited by 1,553
Appleby, A. J., & FOULKES, F. R. (1989) · Medical Entomology and Zoology · Cited by 1,472
Acid‐Doped Polybenzimidazoles: A New Polymer Electrolyte
Wainright, J. S., Wang, J. ‐., Weng, D., Savinell, R. F., & Litt, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044337 · Cited by 1,251
Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000
Costamagna, P., & Srinivasan, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00808-4 · Cited by 1,088
Development of ionomer membranes for fuel cells
Kerres, J. A. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00631-1 · Cited by 1,022
Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes
Xing, P., Robertson, G. P., Guiver, M. D., Mikhailenko, S. D., Wang, K., & Kaliaguine, S. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.09.019 · Cited by 1,007
Zaidi, S. M. J., Mikhailenko, S. D., Robertson, G. P., Guiver, M. D., & Kaliaguine, S. (2000) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00345-8 · Cited by 897
Solid acids as fuel cell electrolytes
Haile, S. M., Boysen, D. A., Chisholm, C. R. I., & Merle, R. B. (2001) · Nature · doi:10.1038/35073536 · Cited by 892
Solid-state protonic conductors: principles, properties, progress and prospects
Norby, T. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00152-6 · Cited by 863
Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000
Costamagna, P., & Srinivasan, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00807-2 · Cited by 807
Non-Fluorinated Polymer Materials for Proton Exchange Membrane Fuel Cells
Rozière, J., & Jones, D. J. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.154657 · Cited by 786
(2003) · Focus on Catalysts · doi:10.1016/s1351-4180(03)00256-3 · Cited by 761
Conductivity of PBI Membranes for High-Temperature Polymer Electrolyte Fuel Cells
Ma, Y.-L., Wainright, J. S., Litt, M. H., & Savinell, R. F. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1630037 · Cited by 716
Electron and proton conducting polymers: recent developments and prospects
Inzelt, G., Pineri, M., Schultze, J. W., & Vorotyntsev, M. A. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00329-7 · Cited by 715
Li, Q., He, R., Jensen, J. O., & Bjerrum, N. J. (2004) · Fuel Cells · doi:10.1002/fuce.200400020 · Cited by 637
Polybenzimidazoles, new thermally stable polymers
Vogel, H. A., & Marvel, C. S. (1961) · Journal of Polymer Science · doi:10.1002/pol.1961.1205015419 · Cited by 604
High-Temperature Polybenzimidazole Fuel Cell Membranes via a Sol−Gel Process
Xiao, L., Zhang, H., Scanlon, E., Ramanathan, L. S., Choe, E., Rogers, D., Apple, T. M., & Benicewicz, B. C. (2005) · Chemistry of Materials · doi:10.1021/cm050831+ · Cited by 579
Jones, D. J., & Rozière, J. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00633-5 · Cited by 568
He, R. (2003) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.09.002 · Cited by 563
Proton conduction in acid doped polybenzimidazole
Bouchet, R. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(98)00466-4 · Cited by 501
A fuel cell using acid doped polybenzimidazole as polymer electrolyte
Wang, J.-T., Savinell, R. F., Wainright, J., Litt, M., & Yu, H. (1996) · Electrochimica Acta · doi:10.1016/0013-4686(95)00313-4 · Cited by 474
Emerging membranes for electrochemical systems
Savadogo, O. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.043 · Cited by 468
Kerres, J., Ullrich, A., Meier, F., & Häring, T. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00181-2 · Cited by 454
Samms, S. R., Wasmus, S., & Savinell, R. F. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836621 · Cited by 406
Solid state protonic conductors, present main applications and future prospects
Alberti, G., & Casciola, M. (2001) · Solid State Ionics · doi:10.1016/s0167-2738(01)00911-0 · Cited by 387
Physicochemical properties of phosphoric acid doped polybenzimidazole membranes for fuel cells
HE, R., LI, Q., BACH, A., JENSEN, J., & BJERRUM, N. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.10.005 · Cited by 372
Qingfeng, L., Hjuler, H. A., & Bjerrum, N. J. (2001) · Journal of Applied Electrochemistry · doi:10.1023/a:1017558523354 · Cited by 364
Water uptake and acid doping of polybenzimidazoles as electrolyte membranes for fuel cells
Li, Q. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.02.013 · Cited by 354
Wang, J., Wasmus, S., & Savinell, R. F. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048487 · Cited by 343
Blended and cross-linked ionomer membranes for application in membrane fuel cells
Kerres, J. A. (2005) · Fuel Cells · doi:10.1002/fuce.200400079 · Cited by 341
Xiao, L., Zhang, H., Jana, T., Scanlon, E., Chen, R., Choe, E. ‐., Ramanathan, L. S., Yu, S., & Benicewicz, B. C. (2005) · Fuel Cells · doi:10.1002/fuce.200400067 · Cited by 332
Solid acid proton conductors: from laboratory curiosities to fuel cell electrolytes
Haile, S. M., Chisholm, C. R. I., Sasaki, K., Boysen, D. A., & Uda, T. (2007) · Faraday Discuss. · doi:10.1039/b604311a · Cited by 318
Investigation of the conduction properties of phosphoric and sulfuric acid doped polybenzimidazole
Glipa, X., Bonnet, B., Mula, B., Jones, D. J., & Rozière, J. (1999) · Journal of Materials Chemistry · doi:10.1039/a906060j · Cited by 315
Durability Studies of PBI‐based High Temperature PEMFCs
Yu, S., Xiao, L., & Benicewicz, B. C. (2008) · Fuel Cells · doi:10.1002/fuce.200800024 · Cited by 310
Recent developments in high-temperature proton conducting polymer electrolyte membranes
Jannasch, P. (2003) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(03)00006-2 · Cited by 296
Proton‐conducting polymers based on benzimidazoles and sulfonated benzimidazoles
Asensio, J. A., Borrós, S., & Gómez‐Romero, P. (2002) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10451 · Cited by 290
Self-citationStaiti, P., Aricò, A. S., Baglio, V., Lufrano, F., Passalacqua, E., & Antonucci, V. (2001) · Solid State Ionics · doi:10.1016/s0167-2738(01)00919-5 · Cited by 287
A Polymer Electrolyte for Operation at Temperatures up to 200°C
Savinell, R., Yeager, E., Tryk, D., Landau, U., Wainright, J., Weng, D., Lux, K., Litt, M., & Rogers, C. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054875 · Cited by 287
Asensio, J. A., & Gómez‐Romero, P. (2005) · Fuel Cells · doi:10.1002/fuce.200400081 · Cited by 274
Self-citationCross-Linked Polybenzimidazole Membranes for Fuel Cells
Li, Q., Pan, C., Jensen, J. O., Noyé, P., & Bjerrum, N. J. (2007) · Chemistry of Materials · doi:10.1021/cm0627793 · Cited by 263
Polybenzimidazole-membrane-based PEM fuel cell in the temperature range of 120–200 °C
Zhang, J., Tang, Y., Song, C., & Zhang, J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.047 · Cited by 259
Glipa, X., El Haddad, M., Jones, D. J., & Rozière, J. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(97)00032-5 · Cited by 246
Xing, B., & Savadogo, O. (2000) · Electrochemistry Communications · doi:10.1016/s1388-2481(00)00107-7 · Cited by 245
Weng, D., Wainright, J. S., Landau, U., & Savinell, R. F. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836626 · Cited by 244
Kawahara, M., Morita, J., Rikukawa, M., Sanui, K., & Ogata, N. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00349-7 · Cited by 239
Real‐Time Mass Spectrometric Study of the Methanol Crossover in a Direct Methanol Fuel Cell
Wang, J. ‐., Wasmus, S., & Savinell, R. F. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836622 · Cited by 237
Malhotra, S., & Datta, R. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837420 · Cited by 237
Deimede, V., Voyiatzis, G. A., Kallitsis, J. K., Qingfeng, L., & Bjerrum, N. J. (2000) · Macromolecules · doi:10.1021/ma000165s · Cited by 236
Sulfonated polybenzimidazole membranes — preparation and physico-chemical characterization
Staiti, P., Lufrano, F., Aricò, A. S., Passalacqua, E., & Antonucci, V. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(01)00359-3 · Cited by 229
Asensio, J. A., Borrós, S., & Gómez-Romero, P. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1640628 · Cited by 224
Self-citationImproved polybenzimidazole films for H3PO4-doped PBI-based high temperature PEMFC
Lobato, J., Cañizares, P., Rodrigo, M. A., Linares, J. J., & Aguilar, J. A. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.08.028 · Cited by 223
Schechter, A. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00040-1 · Cited by 218
Bae, J. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00011-5 · Cited by 218
Jouanneau, J., Mercier, R., Gonon, L., & Gebel, G. (2007) · Macromolecules · doi:10.1021/ma0614139 · Cited by 214
Integration of high temperature PEM fuel cells with a methanol reformer
Pan, C., He, R., Li, Q., Jensen, J. O., Bjerrum, N. J., Hjulmand, H. A., & Jensen, A. B. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.02.056 · Cited by 214
Lobato, J., Cañizares, P., Rodrigo, M. A., Linares, J. J., & Manjavacas, G. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.01.049 · Cited by 209
Enhancement of gas permeation properties of polybenzimidazoles by systematic structure architecture
Kumbharkar, S. C., Karadkar, P. B., & Kharul, U. K. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.09.030 · Cited by 203
A direct methanol fuel cell using acid-doped polybenzimidazole as polymer electrolyte
Wang, J.-T., Wainright, J. S., Savinell, R. F., & Litt, M. (1996) · Journal of Applied Electrochemistry · doi:10.1007/bf00241516 · Cited by 202
Mecerreyes, D., Grande, H., Miguel, O., Ochoteco, E., Marcilla, R., & Cantero, I. (2004) · Chemistry of Materials · doi:10.1021/cm034398k · Cited by 197
Zhang, H., Li, X., Zhao, C., Fu, T., Shi, Y., & Na, H. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.09.045 · Cited by 195
Alkali doped polybenzimidazole membrane for high performance alkaline direct ethanol fuel cell
Hou, H., Sun, G., He, R., Wu, Z., & Sun, B. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.010 · Cited by 188
Tazi, B., & Savadogo, O. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00536-3 · Cited by 187
Okamoto, M., Fujigaya, T., & Nakashima, N. (2009) · Small · doi:10.1002/smll.200801742 · Cited by 186
Li, W. H., Ye, J. H., & Li, S. F. Y. (2001) · Journal of Applied Electrochemistry · doi:10.1023/a:1013872107905 · Cited by 185
Weber, J., Kreuer, K., Maier, J., & Thomas, A. (2008) · Advanced Materials · doi:10.1002/adma.200703159 · Cited by 182
Carollo, A., Quartarone, E., Tomasi, C., Mustarelli, P., Belotti, F., Magistris, A., Maestroni, F., Parachini, M., Garlaschelli, L., & Righetti, P. P. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.081 · Cited by 180
Improving the performance of high-temperature PEM fuel cells based on PBI electrolyte
Seland, F., Berning, T., Børresen, B., & Tunold, R. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.047 · Cited by 176
Proton conducting blends of poly(4-vinylimidazole) with phosphoric acid
Bozkurt, A. (2001) · Solid State Ionics · doi:10.1016/s0167-2738(00)00779-7 · Cited by 169
High pressure electrical conductivity studies of acid doped polybenzimidazole
Fontanella, J. J., Wintersgill, M. C., Wainright, J. S., Savinell, R. F., & Litt, M. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(97)10032-9 · Cited by 165
Studies of performance degradation of a high temperature PEMFC based on H3PO4-doped PBI
Liu, G., Zhang, H., Hu, J., Zhai, Y., Xu, D., & Shao, Z. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.008 · Cited by 162
New membranes based on ionic liquids for PEM fuel cells at elevated temperatures
Ye, H., Huang, J., Xu, J. J., Kodiweera, N. K. A. C., Jayakody, J. R. P., & Greenbaum, S. G. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.074 · Cited by 160
The stability of Pt/C catalyst in H3PO4/PBI PEMFC during high temperature life test
Zhai, Y., Zhang, H., Xing, D., & Shao, Z. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.069 · Cited by 159
PBI-based polymer electrolyte membranes fuel cells
Lobato, J., Cañizares, P., Rodrigo, M. A., & Linares, J. J. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.11.014 · Cited by 158
Hasiotis, C., Qingfeng, L., Deimede, V., Kallitsis, J. K., Kontoyannis, C. G., & Bjerrum, N. J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1366621 · Cited by 154
Fast proton conductivity: A phenomenon between the solid and the liquid state?
Kreuer, K. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(96)00608-x · Cited by 151
Wang, K. Y., Xiao, Y., & Chung, T. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.04.031 · Cited by 151
Linkous, C. A. (1998) · International Journal of Hydrogen Energy · doi:10.1016/s0360-3199(97)00113-4 · Cited by 147
Formic Acid Oxidation in a Polymer Electrolyte Fuel Cell: A Real‐Time Mass‐Spectrometry Study
Weber, M., Wang, J. ‐., Wasmus, S., & Savinell, R. F. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836961 · Cited by 145
Xu, H., Chen, K., Guo, X., Fang, J., & Yin, J. (2007) · Polymer · doi:10.1016/j.polymer.2007.07.029 · Cited by 145
New polymer electrolytes based on blends of sulfonated polysulfones with polybenzimidazole
Hasiotis, C., Deimede, V. A., & Kontoyannis, C. G. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00437-6 · Cited by 137
Direct methanol fuel cell membranes from Nafion-polybenzimidazole blends
Wycisk, R., Chisholm, J., Lee, J., Lin, J., & Pintauro, P. N. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.11.056 · Cited by 136
Alkali doped polybenzimidazole membrane for alkaline direct methanol fuel cell
Hou, H., SUN, G., He, R. H., Sun, B., JIN, W., Liu, H., & Xin, Q. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.09.023 · Cited by 136
Polymer electrolyte fuel cells based on phosphoric acid doped polybenzimidazole (PBI) membranes
Kongstein, O. E., Berning, T., Børresen, B., Seland, F., & Tunold, R. (2006) · Energy · doi:10.1016/j.energy.2006.07.009 · Cited by 135
Influence of the Teflon loading in the gas diffusion layer of PBI-based PEM fuel cells
Lobato, J., Cañizares, P., Rodrigo, M. A., et al. (2008) · Journal of Applied Electrochemistry · doi:10.1007/s10800-008-9512-8 · Cited by 132
Chuang, S., & Hsu, S. L. (2006) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.21555 · Cited by 131
Solution sulfonation of a novel polybenzimidazole
Péron, J., Ruiz, E., Jones, D. J., & Rozière, J. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.01.044 · Cited by 129
Wannek, C., Lehnert, W., & Mergel, J. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.03.051 · Cited by 128
Proton-conducting polymer electrolytes based on phosphoric acid
Bozkurt, A., Ise, M., Kreuer, K., Meyer, W. H., & Wegner, G. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00179-4 · Cited by 128
Acid–Organic base swollen polymer membranes
Sun, J., Jordan, L. R., Forsyth, M., & MacFarlane, D. R. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00774-x · Cited by 125
Water-soluble polybenzimidazole-based polyelectrolytes
Gieselman, M. B., & Reynolds, J. R. (1992) · Macromolecules · doi:10.1021/ma00044a056 · Cited by 125
Qi, Z., & Buelte, S. J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.020 · Cited by 124
Electrochemical hydrogen pumping using a high-temperature polybenzimidazole (PBI) membrane
Perry, K. A., Eisman, G. A., & Benicewicz, B. C. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.11.059 · Cited by 122
Durability of ABPBI‐based MEAs for High Temperature PEMFCs at Different Operating Conditions
Wannek, C., Kohnen, B., Oetjen, H. ‐., Lippert, H., & Mergel, J. (2008) · Fuel Cells · doi:10.1002/fuce.200700059 · Cited by 121
Zaidi, S. M. J. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.02.027 · Cited by 120
Zhai, Y., Zhang, H., Zhang, Y., & Xing, D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.004 · Cited by 120
Synthesis of Poly(2,5‐benzimidazole) for Use as a Fuel‐Cell Membrane
Kim, H., Cho, S. Y., An, S. J., Eun, Y. C., Kim, J., Yoon, H., Kweon, H.-J., & Yew, K. H. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200300288 · Cited by 116
He, R., Li, Q., Jensen, J. O., & Bjerrum, N. J. (2007) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22053 · Cited by 116
Asensio, J. A., Borrós, S., & Gómez‐Romero, P. (2003) · Electrochemistry Communications · doi:10.1016/j.elecom.2003.09.007 · Cited by 115
Self-citationJalani, N. H., Ramani, M., Ohlsson, K., Buelte, S. J., Pacifico, G., Pollard, R., Staudt, R., & Datta, R. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.094 · Cited by 111
Synthesis and characterization of thermally stable sulfonated polybenzimidazoles
Qing, S., Huang, W., & Yan, D. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.02.001 · Cited by 109
Staiti, P., & Minutoli, M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00597-8 · Cited by 109
Polybenzimidazoles/Phosphoric Acid Solid Polymer Electrolytes: Mechanical and Electrical Properties
Litt, M. H., Ameri, R., Wang, Y., Savinell, R. F., & Wainwright, J. (1998) · MRS Proceedings · doi:10.1557/proc-548-313 · Cited by 106
Chuang, S., Hsu, S. L., & Liu, Y.-H. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.08.033 · Cited by 105
Lee, H.-S., Roy, A., Lane, O. R., & McGrath, J. E. E. (2008) · Polymer · doi:10.1016/j.polymer.2008.09.019 · Cited by 102
Silva, V. S., Weisshaar, S., Reißner, R., Ruffmann, B., Vetter, S., Mendes, A. M. M., Madeira, L. M., & Nunes, S. P. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.12.061 · Cited by 102
Kim, T., Lim, T., & Lee, J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.040 · Cited by 101
Chuang, S., Hsu, S. L., & Hsu, C.-L. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.021 · Cited by 101
Pu, H. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2004.03.008 · Cited by 100
500h Continuous aging life test on PBI/H3PO4 high-temperature PEMFC
Hu, J.-Y., Zhang, H., Zhai, Y., Liu, G., & Yi, B. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.05.001 · Cited by 99
Daletou, M. K., Gourdoupi, N., & Kallitsis, J. K. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2004.11.023 · Cited by 98
Kosmala, B., & Schauer, J. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10632 · Cited by 95
Characterization and application of composite membranes in DMFC
Silva, V. S., Ruffmann, B., Vetter, S., Mendes, A. M. M., Madeira, L. M., & Nunes, S. P. (2005) · Catalysis Today · doi:10.1016/j.cattod.2005.03.051 · Cited by 92
Krishnan, P., Park, J., & Kim, C.-S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.11.071 · Cited by 92
Daletou, M. K., Kallitsis, J. K., Voyiatzis, G. A., & Neophytides, S. G. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.09.040 · Cited by 92
Tuning the Molecular Properties of Polybenzimidazole by Copolymerization
Sannigrahi, A., Arunbabu, D., Sankar, R. M., & Jana, T. (2007) · The Journal of Physical Chemistry B · doi:10.1021/jp073973v · Cited by 91
Qian, G., Smith, D. W., & Benicewicz, B. C. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.024 · Cited by 91
Asensio, J. A., Borrós, S., & Gómez‐Romero, P. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.05.002 · Cited by 91
Self-citationLi, M., Shao, Z., & Scott, K. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.093 · Cited by 90
Mesoporous Poly(benzimidazole) Networks via Solvent Mediated Templating of Hard Spheres
Weber, J., Antonietti, M., & Thomas, A. (2007) · Macromolecules · doi:10.1021/ma062598m · Cited by 90
Polybenzimidazoles for High Temperature Fuel Cell Applications
Kim, H., An, S. J., Kim, J., Moon, J. K., Cho, S. Y., Eun, Y. C., Yoon, H., Park, Y., Kweon, H.-J., & Shin, E.-M. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200400167 · Cited by 89
Li, Q., Jensen, J. O., Pan, C., Bandur, V., Nilsson, M. S., Schönberger, F., Chromik, A., Hein, M., Häring, T., Kerres, J. A., et al. (2008) · Fuel Cells · doi:10.1002/fuce.200800007 · Cited by 87
Hybrid proton-conducting membranes for polymer electrolyte fuel cells
Gómez‐Romero, P., Asensio, J. A., & Borrós, S. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.02.029 · Cited by 86
Self-citationNafion®–polybenzimidazole (PBI) composite membranes for DMFC applications
Ainla, A., & Brandell, D. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.01.014 · Cited by 86
Lee, J. K., & Kerres, J. A. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.02.013 · Cited by 86
Ariza, M. J., Jones, D. J., & Rozière, J. (2002) · Desalination · doi:10.1016/s0011-9164(02)00532-5 · Cited by 85
Sulfonated Polyphosphazene-Polybenzimidazole Membranes for DMFCs
Wycisk, R., Lee, J. K., & Pintauro, P. N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1874692 · Cited by 83
Cross‐Linked Polyaryl Blend Membranes for Polymer Electrolyte Fuel Cells
Kerres, J. A., Ullrich, A., Hein, M., Gogel, V., Friedrich, K. A., & Jörissen, L. (2004) · Fuel Cells · doi:10.1002/fuce.200400013 · Cited by 81
Acar, O., Şen, Ü., Bozkurt, A., & Ata, A. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.01.073 · Cited by 80
Kim, J.-H., Kim, H., Lim, T., & Lee, H. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.082 · Cited by 80
Development of high-temperature PEMFC based on heteropolyacids and polybenzimidazole
Verma, A., & Scott, K. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-008-0678-0 · Cited by 80
Performance of a Vapor-Fed Polybenzimidazole (PBI)-Based Direct Methanol Fuel Cell
Lobato, J., Cañizares, P., Rodrigo, M. A., Linares, J. J., & López-Vizcaíno, R. (2008) · Energy & Fuels · doi:10.1021/ef8001839 · Cited by 80
Kerres, J. A., Schönberger, F., Chromik, A., Häring, T., Li, Q., Jensen, J. O., Pan, C., Noyé, P. P., & Bjerrum, N. J. (2008) · Fuel Cells · doi:10.1002/fuce.200800011 · Cited by 80
Noyé, P. P., Li, Q., Pan, C., & Bjerrum, N. J. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1123 · Cited by 79
Choi, S., Coronas, J., Lai, Z., Yust, D., Onorato, F. J., & Michael Tsapatsis, B. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.09.026 · Cited by 77
Exfoliated Pt-Clay/Nafion Nanocomposite Membrane for Self-Humidifying Polymer Electrolyte Fuel Cells
Zhang, W. A., Li, M. K. S., Yue, P. L., & Gao, P. (2008) · Langmuir · doi:10.1021/la702153v · Cited by 77
Kerres, J. A., Xing, D., & Schönberger, F. (2006) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20862 · Cited by 77
Pan, C., Li, Q., Jensen, J. O., He, R., Cleemann, L. N., Nilsson, M. S., Bjerrum, N. J., & Zeng, Q. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.019 · Cited by 76
Sannigrahi, A., Ghosh, S., Lalnuntluanga, J., & Jana, T. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29234 · Cited by 73
Kim, T., Kim, S., Lim, T., & Lee, J. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.06.040 · Cited by 73
Hu, J., Zhang, H., Zhai, Y., Liu, G., Hu, J. M., & Yi, B. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.05.020 · Cited by 73
Qing, S., Huang, W., & Yan, D. (2005) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.20842 · Cited by 73
Functionalized Poly(benzimidazole)s as Membrane Materials for Fuel Cells
Sukumar, P. R., Wu, W., Markova, D., Ünsal, Ö., Klapper, M., & Müllen, K. (2007) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200700390 · Cited by 70
Synthesis and proton conductivity of sulfopropylated poly(benzimidazole) films
Kawahara, M. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00596-8 · Cited by 69
Kopitzke, R. W., Linkous, C. A., & Nelson, G. L. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00135-4 · Cited by 69
Kim, J., Mori, T., Hayashi, S., & Honma, I. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2436611 · Cited by 68
Synthesis of hyperbranched polybenzimidazoles and their membrane formation
Xu, H., Chen, K., Guo, X., Fang, J., & Yin, J. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.11.022 · Cited by 67
Synthesis and properties of soluble sulfonated polybenzimidazoles
Qing, S., Huang, W., & Yan, D. (2005) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2005.07.020 · Cited by 67
701. The mechanism of electrical conduction in fused phosphoric and trideuterophosphoric acids
Greenwood, N. N., & Thompson, A. (1959) · Journal of the Chemical Society (Resumed) · doi:10.1039/jr9590003485 · Cited by 66
Improved performance of sulfonated polyarylene ethers for proton exchange membrane fuel cells
Xing, D., & Kerres, J. A. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.758 · Cited by 64
Liu, G., Zhang, H., Zhai, Y., Zhang, Y., Xu, D., & Shao, Z. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.08.056 · Cited by 63
High DMFC performance output using modified acid–base polymer blend
Pasupathi, S., Ji, S., Bladergroen, B. J., & Linkov, V. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.01.033 · Cited by 63
Trimethoxymethane as an alternative fuel for a direct oxidation PBI polymer electrolyte fuel cell
Wang, J. T., Lin, W. F., Weber, M., Wasmus, S., & Savinell, R. F. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(98)00142-x · Cited by 60
Improvement of Properties of Poly(ether ketone) Ionomer Membranes by Blending and Cross-Linking
Kerres, J. A., Tang, C.-M., & Graf, C. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030762d · Cited by 58
100–200 C polymer fuel cells for use with NaAlH4
Jensen, J. O., Li, Q., He, R. H., Pan, C., & Bjerrum, N. J. (2005) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2005.02.091 · Cited by 58
Proton Conductivity in Acid-Blended Poly(4-vinylimidazole)
Pu, H., Meyer, W. H., & Wegner, G. (2001) · Macromolecular Chemistry and Physics · Cited by 56
Diaz, L. A., Abuin, G. C., & Corti, H. R. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.114 · Cited by 55
Proton conduction in poly (acrylamide)-acid blends
RODRIGUEZ, D., Simonnet‐Jégat, C., Trinquet, O., Grondin, J., & Lassègues, J. C. (1993) · Solid State Ionics · doi:10.1016/0167-2738(93)90354-6 · Cited by 54
Polymer Structure: Cross-Linking of a Polybenzimidazole
Gillham, J. K. (1963) · Science · doi:10.1126/science.139.3554.494 · Cited by 53
Acid‐Doped Polybenzimidazole as the Membrane of Electrochemical Hydrogen Sensors
Bouchet, R., Siebert, E., & Vitter, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837622 · Cited by 52
High protonic conduction of polybenzimidazole films
Hoel, D., & Grunwald, E. (1977) · The Journal of Physical Chemistry · doi:10.1021/j100537a021 · Cited by 52
Manea, C., & Mulder, M. H. V. (2002) · Desalination · doi:10.1016/s0011-9164(02)00531-3 · Cited by 51
A Quasi-Direct Methanol Fuel Cell System Based on Blend Polymer Membrane Electrolytes
Li, Q., Hjuler, H. A., Hasiotis, C., Kallitsis, J. K., Kontoyannis, C. G., & Bjerrum, N. J. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1473335 · Cited by 51
Chuang, S., Hsu, S. L., & Yang, M.-L. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.04.021 · Cited by 49
Zhang, Y., Zhang, H., Zhu, X., & Bi, C. (2007) · The Journal of Physical Chemistry B · doi:10.1021/jp071805x · Cited by 48
Pu, H., Liu, Q., Qiao, L., & Yang, Z. (2005) · Polymer Engineering and Science · doi:10.1002/pen.20394 · Cited by 47
Relationship between absorbed water and proton conductivity in sulfopropylated poly(benzimidazole)
Kawahara, M., Rikukawa, M., & Sanui, K. (2000) · Polymers for Advanced Technologies · Cited by 46
Franceschini, E. A., & Corti, H. R. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.019 · Cited by 42
Jang, M. Y., & Yamazaki, Y. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.03.080 · Cited by 42
Methanol permeability and proton conductivity of polybenzimidazole and sulfonated polybenzimidazole
Pu, H., & Liu, Q. (2004) · Polymer International · doi:10.1002/pi.1577 · Cited by 42
Schechter, A., Savinell, R. F., Wainright, J. S., & Ray, D. J. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.3040211 · Cited by 37
Kim, T., Lim, T., Park, Y., Shin, K., & Lee, J. (2007) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200700261 · Cited by 37
A new anhydrous proton conductor based on polybenzimidazole and tridecyl phosphate
Jiang, F., Pu, H., Meyer, W. H., Guan, Y., & Wan, D. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.01.022 · Cited by 35
Proton conducting polymer electrolyte-The Nylon 6–10/H3PO4 blends
Grondin, J. (1995) · Solid State Ionics · doi:10.1016/0167-2738(94)00290-9 · Cited by 34
Pu, H. (2003) · Polymer International · doi:10.1002/pi.1280 · Cited by 33
A Solid-State NMR Study of Hydrogen-Bonding Networks and Ion Dynamics in Benzimidazole Salts
Traer, J. W., Britten, J. F., & Goward, G. R. (2007) · The Journal of Physical Chemistry B · doi:10.1021/jp071471b · Cited by 29
Solid-state hydrogen sensor based on acid-doped polybenzimidazole
Bouchet, R., Rosini, S., Vitter, G., & Siebert, E. (2001) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(01)00655-4 · Cited by 28
Bouchet, R., Siebert, E., & Vitter, G. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393869 · Cited by 28
Proton conductivity of zirconium tricarboxybutylphosphonate/PBI nanocomposite membrane
Yamazaki, Y., Jang, M. Y., & Taniyama, T. (2004) · Science and Technology of Advanced Materials · doi:10.1016/j.stam.2004.02.005 · Cited by 27
Synthesis of proton conducting polymer based on poly(silamine)
Tsuruhara, K., Rikukawa, M., Sanui, K., Ogata, N., Nagasaki, Y., & Katô, M. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00348-5 · Cited by 26
Wang, J., Song, Y., Zhang, C., Ye, Z., Liu, H., Lee, M., Wang, D., & Ji, J. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200700610 · Cited by 25
Jang, M. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2003.12.003 · Cited by 24
Kim, S., Kim, T., Jung, J., & Lee, J. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800179 · Cited by 24
Wainright, J. S., Litt, M. H., & Savinell, R. F. (2010) · Wiley eBooks · doi:10.1002/9780470974001.f303038 · Cited by 21
Preparation and characterization of polybenzimidazole–clay hybrid materials
Gültek, A., Icduygu, M. G., & Seçki̇n, T. (2004) · Materials Science and Engineering B · doi:10.1016/j.mseb.2003.11.001 · Cited by 18
Polybenzimidazole-Based Hydrogen Sensors II. Effect of the Electrode Preparation
Bouchet, R., Siebert, E., & Vitter, G. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393936 · Cited by 17
779. Anomalous conduction in phosphoric acid hemihydrate, 2H3PO4,H2O
Greenwood, N. N., & Thompson, A. (1959) · Journal of the Chemical Society (Resumed) · doi:10.1039/jr9590003864 · Cited by 12
Leikin, A. Y., Rusanov, A. L., Бегунов, Р. С., & Fomenkov, A. I. (2009) · Polymer Science Series C · doi:10.1134/s1811238209010044 · Cited by 11
Rosini, S., & Siebert, E. (2003) · Electrochimica Acta · doi:10.1016/j.electacta.2003.09.006 · Cited by 11
Ramaiyan, K. P., Islam, M. N., Rathod, D. G., Vijay, M., Kharul, U. K., Ghosh, P. C., & Vijayamohanan, K. (2008) · Journal of Applied Electrochemistry · doi:10.1007/s10800-007-9475-1 · Cited by 8
Hänninen, T., Tammelin, T., Kontturi, E., Mondaugas, B., Pere, J., Saito, T., Isogai, A., & Vuorinen, T. (2009) · Cited by 7
New polybenzimidazoles for producing medium-temperature proton-exchange membranes
Leikin, A. Y., & Rusanov, A. L. (2009) · Polymer Science Series C · doi:10.1134/s1811238209010032 · Cited by 4
Cited by
High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – A review
Chandan, A., Hattenberger, M., El-kharouf, A., Du, S., Dhir, A., Self, V., Pollet, B. G., Ingram, A., & Bujalski, W. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.126 · Cited by 926
Proton-conducting crystalline porous materials
Meng, X., Wang, H.-N., Song, S.-Y., & Zhang, H.-J. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00528d · Cited by 697
Materials and membrane technologies for water and energy sustainability
Le, N. L., & Nunes, S. P. (2016) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2016.02.001 · Cited by 432
Scofield, M. E., Liu, H., & Wong, S. S. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00302d · Cited by 388
Qu, E., Hao, X., Xiao, M., Han, D., Huang, S., Huang, Z., Wang, S., & Meng, Y. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231386 · Cited by 363
Metadata
- Authors
- Asensio, J. A., Sánchez, E. M., & Gómez-Romero, P.
- Venue
- Chemical Society Reviews
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 39
- Issue
- 8
- Pages
- 3210
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2011733788
- Cited by
- 746
- References
- 195
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
