The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Control of catenation in CuTATB-n metal–organic frameworks by sonochemical synthesis and its effect on CO2 adsorption
Abstract
The metal–organic frameworks CuTATB-n (TATB = 4,4′,4″-s-triazine-2,4,6-triyltribenzoate; n = power level) having either catenated (CuTATB-60) or non-catenated (CuTATB-30) structure were synthesized in 1 h via a novel sonochemical route. The control of catenation was achieved by simple adjustment of the ultrasonic power levels. The X-ray diffraction patterns, BET surface areas (3778 and 2477 m2 g−1, respectively) and pore volumes, and TGA patterns of the individual product obtained were in agreement with the published literature data of the corresponding materials known as PCN-6 (catenated) and PCN-6′ (non-catenated). Catenation of the two identical networks within large pores resulted in both high surface area and enhanced stability of the network. Such control of catenation was additionally demonstrated by successful synthesis of IRMOF-9 (catenated) and IRMOF-10 (non-catenated) pair by the same sonochemical method. CO2 adsorption properties of the CuTATB-n were measured at 273 and 298 K, which indicated the contribution of catenation in CuTATB-n for CO2 capture. The adsorption isotherms for CO2 and N2 show high adsorption capacity for CO2 (189 mg g−1 and 156 mg g−1, respectively for CuTATB-60 and -30 at 298 K) and excellent selectivity over N2 (>20 : 1). Five consecutive adsorption–desorption runs performed using high purity CO2 in a flow system established no deterioration in the adsorption capacity of CuTATB-60, which showed reversible adsorbent regeneration at 75 °C under He flow and excellent stability for a total duration of 800 min. CuTATB-60 has also demonstrated high gas adsorption capacity (1171 mgCO2 g−1adsorbent) at 30 bar and 298 K.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Self-citationInterpenetrating Nets: Ordered, Periodic Entanglement
Batten, S. R., & Robson, R. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980619)37:11<1460::aid-anie1460>3.0.co;2-z · Cited by 4,337
High-Throughput Synthesis of Zeolitic Imidazolate Frameworks and Application to CO 2 Capture
Banerjee, R., Phan, A., Wang, B., Knobler, C., Furukawa, H., O'Keeffe, M., & Yaghi, O. M. (2008) · Science · doi:10.1126/science.1152516 · Cited by 4,205
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Rowsell, J. L. C., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056639q · Cited by 1,841
Guest-Dependent Spin Crossover in a Nanoporous Molecular Framework Material
Halder, G. J., Kepert, C. J., Moubaraki, B., Murray, K. S., & Cashion, J. D. (2002) · Science · doi:10.1126/science.1075948 · Cited by 1,569
Interwoven Metal-Organic Framework on a Periodic Minimal Surface with Extra-Large Pores
Chen, B., Eddaoudi, M., Hyde, S. T., O'Keeffe, M., & Yaghi, O. M. (2001) · Science · doi:10.1126/science.1056598 · Cited by 1,265
Hwang, Y. K., Hong, D., Chang, J., Jhung, S. H., Seo, Y., Kim, J., Vimont, A., Daturi, M., Serre, C., & Férey, G. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200705998 · Cited by 1,243
Self-citationA Microporous Metal–Organic Framework for Gas‐Chromatographic Separation of Alkanes
Chen, B., Liang, C., Yang, J., Contreras, D. S., Clancy, Y. L., Lobkovsky, E. B., Yaghi, O. M., & Dai, S. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200502844 · Cited by 1,238
Britt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909718106 · Cited by 1,211
High Uptakes of CO2 and CH4 in Mesoporous Metal—Organic Frameworks MIL-100 and MIL-101
Llewellyn, P. L., Bourrelly, S., Serre, C., Vimont, A., Daturi, M., Hamon, L., De Weireld, G., Chang, J.-S., Hong, D.-Y., Kyu Hwang, Y., et al. (2008) · Langmuir · doi:10.1021/la800227x · Cited by 1,156
Hydrogen Storage in a Microporous Metal−Organic Framework with Exposed Mn2+ Coordination Sites
Dincǎ, M., Dailly, A., Liu, Y., Brown, C. M., Neumann, D. A., & Long, J. R. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0656853 · Cited by 1,137
Schlichte, K., Kratzke, T., & Kaskel, S. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2003.12.027 · Cited by 1,112
Porous Coordination‐Polymer Crystals with Gated Channels Specific for Supercritical Gases
Kitaura, R., Seki, K., Akiyama, G., & Kitagawa, S. (2003) · Angewandte Chemie International Edition · doi:10.1002/anie.200390130 · Cited by 1,054
An Amine-Functionalized MIL-53 Metal−Organic Framework with Large Separation Power for CO 2 and CH 4
Couck, S., Denayer, J. F. M., Baron, G. V., Rémy, T., Gascon, J., & Kapteijn, F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja900555r · Cited by 988
A flexible interpenetrating coordination framework with a bimodal porous functionality
Maji, T. K., Matsuda, R., & Kitagawa, S. (2007) · Nature Materials · doi:10.1038/nmat1827 · Cited by 772
Metallo-organic molecular sieve for gas separation and purification
Min Wang, Q., Shen, D., Bülow, M., Ling Lau, M., Deng, S., Fitch, F. R., Lemcoff, N. O., & Semanscin, J. (2002) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(02)00405-5 · Cited by 771
Separation of Hydrocarbons with a Microporous Metal–Organic Framework
Pan, L., Olson, D. H., Ciemnolonski, L. R., Heddy, R., & Li, J. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503503 · Cited by 731
Framework-Catenation Isomerism in Metal−Organic Frameworks and Its Impact on Hydrogen Uptake
Ma, S., Sun, D., Ambrogio, M., Fillinger, J. A., Parkin, S., & Zhou, H.-C. (2007) · Journal of the American Chemical Society · doi:10.1021/ja067435s · Cited by 636
An Interweaving MOF with High Hydrogen Uptake
Sun, D., Ma, S., Ke, Y., Collins, D. J., & Zhou, H.-C. (2006) · Journal of the American Chemical Society · doi:10.1021/ja058777l · Cited by 591
Sonochemical synthesis of MOF-5
Son, W.-J., Kim, J., Kim, J., & Ahn, W.-S. (2008) · Chemical Communications · doi:10.1039/b814740j · Cited by 558
Self-citationNelson, A. P., Farha, O. K., Mulfort, K. L., & Hupp, J. T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja808853q · Cited by 539
Controlling interpenetration in metal–organic frameworks by liquid-phase epitaxy
Shekhah, O., Wang, H., Paradinas, M., Ocal, C., Schüpbach, B., Terfort, A., Zacher, D., Fischer, R. A., & Wöll, C. (2009) · Nature Materials · doi:10.1038/nmat2445 · Cited by 529
Loiseau, T., Lecroq, L., Volkringer, C., Marrot, J., Férey, G., Haouas, M., Taulelle, F., Bourrelly, S., Llewellyn, P. L., & Latroche, M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0621086 · Cited by 453
A Microporous Metal−Organic Framework for Separation of CO2/N2 and CO2/CH4 by Fixed-Bed Adsorption
Bastin, L., Bárcia, P. S., Hurtado, E. J., Silva, J. A. C., Rodrigues, A. E., & Chen, B. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp077618g · Cited by 442
Temperature and Concentration Control over Interpenetration in a Metal−Organic Material
Zhang, J., Wojtas, L., Larsen, R. W., Eddaoudi, M., & Zaworotko, M. J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja906911q · Cited by 388
Farha, O. K., Malliakas, C. D., Kanatzidis, M. G., & Hupp, J. T. (2010) · Journal of the American Chemical Society · doi:10.1021/ja909519e · Cited by 363
Park, Y. K., Choi, S. B., Kim, H., Kim, K., Won, B., Choi, K., Choi, J., Ahn, W., Won, N., Kim, S., et al. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200702324 · Cited by 320
Self-citationFacile synthesis of MOF-177 by a sonochemical method using 1-methyl-2-pyrrolidinone as a solvent
Jung, D.-W., Yang, D.-A., Kim, J., Kim, J., & Ahn, W.-S. (2010) · Dalton Transactions · doi:10.1039/b925088c · Cited by 264
Self-citationA Triply Interpenetrated Microporous Metal−Organic Framework for Selective Sorption of Gas Molecules
Chen, B., Ma, S., Hurtado, E. J., Lobkovsky, E. B., & Zhou, H.-C. (2007) · Inorganic Chemistry · doi:10.1021/ic7014034 · Cited by 232
Farrusseng, D., Daniel, C., Gaudillère, C., Ravon, U., Schuurman, Y., Mirodatos, C., Dubbeldam, D., Frost, H., & Snurr, R. Q. (2009) · Langmuir · doi:10.1021/la900283t · Cited by 231
Ma, L., Jin, A., Xie, Z., & Lin, W. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200904983 · Cited by 224
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.03.017 · Cited by 202
Cheon, Y. E., & Suh, M. P. (2008) · Chemistry – A European Journal · doi:10.1002/chem.200701813 · Cited by 186
Flexible metal–organic supramolecular isomers for gas separation
Radha Kishan, M., Tian, J., Thallapally, P. K., Fernandez, C. A., Dalgarno, S. J., Warren, J. E., McGrail, B. P., & Atwood, J. L. (2010) · Chem. Commun. · doi:10.1039/b913910a · Cited by 180
Xue, M., Ma, S., Zhao, J. W., Schaffino, R. M., Zhu, G.-S., Lobkovsky, E. B., Qiu, S.-L., & Chen, B. (2008) · Inorganic Chemistry · doi:10.1021/ic800854y · Cited by 156
Choi, S. B., Seo, M. J., Cho, M. Y., Kim, Y., Jin, M. K., Jung, D., Choi, J.-S., Ahn, W., Rowsell, J. L. C., & Kim, J. (2007) · Crystal Growth & Design · doi:10.1021/cg070640e · Cited by 100
Self-citation
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion
Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,524
Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs): A review
Khan, N. A., Hasan, Z., & Jhung, S. H. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.11.011 · Cited by 1,398
Progress in adsorption-based CO2capture by metal–organic frameworks
Liu, J., Thallapally, P. K., McGrail, B. P., Brown, D. R., & Liu, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15221a · Cited by 1,339
The Current Status of MOF and COF Applications
Freund, R., Zaremba, O., Arnauts, G., Ameloot, R., Skorupskii, G., Dincă, M., Bavykina, A., Gascon, J., Ejsmont, A., Goscianska, J., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202106259 · Cited by 1,194
Metadata
- Authors
- Kim, J., Yang, S.-T., Choi, S. B., Sim, J., Kim, J., & Ahn, W.-S.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 9
- Pages
- 3070
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2081766466
- Cited by
- 270
- References
- 38
- FWCI
- 10.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.