High and selective CO2 uptake, H2 storage and methanol sensing on the amine-decorated 12-connected MOF CAU-1
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
The amine-decorated microporous metal–organic framework CAU-1 was readily synthesized and activated using a home-made efficient protocol. It exhibited a high heat of adsorption for CO2, high CO2 uptake capacity, and an impressive selectivity for CO2 over N2. At 273 K and up to 1 atm, CO2 uptake capacity can reach as much as 7.2 mmol g−1. Comparatively, the CH4 and N2 uptakes at 273 K and 1 atm were only 1.34 mmol g−1 and 0.37 mmol g−1, respectively. The CO2/N2 selectivity was 101 : 1 at 273 K. The isosteric heat of adsorption (Qst) for CO2 was ∼48 kJ mol−1 at the onset of adsorption, and it decreases to ∼28 kJ mol−1 at higher CO2 pressures. Furthermore, CAU-1 can adsorb 2.0 wt% and 4.0 wt% hydrogen at 77 K under 1 atm and 30 atm, respectively. The adsorption characteristics of CAU-1 for methanol investigated in situ with a quartz crystal microbalance (QCM), indicated that this particular MOF structure can be used as a highly sensitive sensor for methanol detection such as direct methanol fuel cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Functional Porous Coordination Polymers
Kitagawa, S., Kitaura, R., & Noro, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300610 · Cited by 11,071
Eddaoudi, M., Moler, D. B., Li, H., Chen, B., Reineke, T. M., O'Keeffe, M., & Yaghi, O. M. (2001) · Accounts of Chemical Research · doi:10.1021/ar000034b · Cited by 5,180
Hydrogen storage in metal–organic frameworks
Murray, L. J., Dincă, M., & Long, J. R. (2009) · Chemical Society Reviews · doi:10.1039/b802256a · Cited by 4,532
High-Throughput Synthesis of Zeolitic Imidazolate Frameworks and Application to CO 2 Capture
Banerjee, R., Phan, A., Wang, B., Knobler, C., Furukawa, H., O'Keeffe, M., & Yaghi, O. M. (2008) · Science · doi:10.1126/science.1152516 · Cited by 4,205
Progress in carbon dioxide separation and capture: A review
Yang, H., Xu, Z., Fan, M., Gupta, R., Slimane, R. B., Bland, A. E., & Wright, I. (2008) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)60002-9 · Cited by 2,087
Song, C. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.029 · Cited by 1,809
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Banerjee, R., Furukawa, H., Britt, D., Knobler, C., O’Keeffe, M., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809459e · Cited by 1,443
Demessence, A., D’Alessandro, D. M., Foo, M. L., & Long, J. R. (2009) · Journal of the American Chemical Society · doi:10.1021/ja903411w · Cited by 1,115
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion
Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,524
Stassen, I., Burtch, N., Talin, A., Falcaro, P., Allendorf, M., & Ameloot, R. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00122c · Cited by 1,210
CO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Metal–organic frameworks based on flexible ligands (FL-MOFs): structures and applications
Lin, Z.-J., Lü, J., Hong, M., & Cao, R. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60483g · Cited by 874
Carbon capture with ionic liquids: overview and progress
Zhang, X., Zhang, X., Dong, H., Zhao, Z., Zhang, S., & Huang, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21152a · Cited by 863
Emerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
Chemical Sensors Based on Metal–Organic Frameworks
Yi, F., Chen, D., Wu, M., Han, L., & Jiang, H. (2016) · ChemPlusChem · doi:10.1002/cplu.201600137 · Cited by 660
Zhang, Z., Zhao, Y., Gong, Q., Li, Z., & Li, J. (2013) · Chem. Commun. · doi:10.1039/c2cc35561b · Cited by 609
Self-citationCO2capture and conversion using Mg-MOF-74 prepared by a sonochemical method
Yang, D.-A., Cho, H.-Y., Kim, J., Yang, S.-T., & Ahn, W.-S. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02234b · Cited by 585
Luo, Y., Li, B., Wang, W., Wu, K., & Tan, B. (2012) · Advanced Materials · doi:10.1002/adma.201202447 · Cited by 487
Metal‐Organic Frameworks for Carbon Dioxide Capture and Methane Storage
Lin, Y., Kong, C., Zhang, Q., & Chen, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601296 · Cited by 443
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Du, L., Lu, Z., Zheng, K., Wang, J., Zheng, X., Pan, Y., You, X., & Bai, J. (2013) · Journal of the American Chemical Society · doi:10.1021/ja309992a · Cited by 360
Modification of the Mg/DOBDC MOF with Amines to Enhance CO2 Adsorption from Ultradilute Gases
Choi, S., Watanabe, T., Bae, T.-H., Sholl, D. S., & Jones, C. W. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz300328j · Cited by 352
Linker functionalized metal-organic frameworks
Ali Akbar Razavi, S., & Morsali, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213023 · Cited by 341
Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity
Alabadi, A., Razzaque, S., Yang, Y., Chen, S., & Tan, B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.032 · Cited by 322
Saha, D., Grappe, H. A., Chakraborty, A., & Orkoulas, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00745 · Cited by 316
Zhou, J.-M., Shi, W., Li, H.-M., Li, H., & Cheng, P. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp4097502 · Cited by 314
Polyethyleneimine Incorporated Metal-Organic Frameworks Adsorbent for Highly Selective CO2 Capture
Lin, Y., Yan, Q., Kong, C., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01859 · Cited by 311
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Carbon dioxide adsorption based on porous materials
Sai Bhargava Reddy, M., Ponnamma, D., Sadasivuni, K. K., Kumar, B., & Abdullah, A. M. (2021) · RSC Advances · doi:10.1039/d0ra10902a · Cited by 300
A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, X. (., Liu, L., Luo, X., Xiao, G., Shiko, E., Zhang, R., Fan, X., Zhou, Y., Liu, Y., Zeng, Z., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114244 · Cited by 282
Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Mahajan, S., & Lahtinen, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108930 · Cited by 282
Han, Z., Yang, Y., Rushlow, J., Huo, J., Liu, Z., Hsu, Y.-C., Yin, R., Wang, M., Liang, R., Wang, K.-Y., et al. (2025) · Chemical Society Reviews · doi:10.1039/d4cs00432a · Cited by 272
Carbon capture by absorption – Path covered and ahead
Sreedhar, I., Nahar, T., Venugopal, A., & Srinivas, B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.109 · Cited by 261
Selective adsorption of carbon dioxide by carbonized porous aromatic framework (PAF)
Ben, T., Li, Y., Zhu, L., Zhang, D., Cao, D., Xiang, Z., Yao, X., & Qiu, S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21935b · Cited by 257
Amine-functionalized metal–organic frameworks: structure, synthesis and applications
Lin, Y., Kong, C., & Chen, L. (2016) · RSC Advances · doi:10.1039/c6ra01536k · Cited by 256
Cui, P., Ma, Y.-G., Li, H.-H., Zhao, B., Li, J.-R., Cheng, P., Balbuena, P. B., & Zhou, H.-C. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3063138 · Cited by 242
Microwave-Assisted Rapid Synthesis of Well-Shaped MOF-74 (Ni) for CO2 Efficient Capture
Chen, C., Feng, X., Zhu, Q., Dong, R., Yang, R., Cheng, Y., & He, C. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b03271 · Cited by 242
Mesoporous Metal–Organic Frameworks: Synthetic Strategies and Emerging Applications
Liu, D., Zou, D., Zhu, H., & Zhang, J. (2018) · Small · doi:10.1002/smll.201801454 · Cited by 205
Self-citationAdvancement in porous adsorbents for post-combustion CO2 capture
Modak, A., & Jana, S. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.09.018 · Cited by 196
CO2 capture by amine-functionalized nanoporous materials: A review
Chen, C., Kim, J., & Ahn, W.-S. (2014) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-014-0257-2 · Cited by 184
Wang, L., Fan, G., Xu, X., Chen, D., Wang, L., Shi, W., & Cheng, P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00256d · Cited by 174
Exceptional CO 2 working capacity in a heterodiamine-grafted metal–organic framework
Lee, W. R., Jo, H., Yang, L.-M., Lee, H., Ryu, D. W., Lim, K. S., Song, J. H., Min, D. Y., Han, S. S., Seo, J. G., et al. (2015) · Chemical Science · doi:10.1039/c5sc01191d · Cited by 153
Metadata
- Authors
- Si, X., Jiao, C., Li, F., Zhang, J., Wang, S., Liu, S., Li, Z., Sun, L., Xu, F., Gabelica, Z., & Schick, C.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 11
- Pages
- 4522
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2004947130
- Cited by
- 262
- References
- 24
- FWCI
- 14.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.