Critical role of small micropores in high CO2 uptake
The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Abstract
Microporous carbon materials with extremely small pore size are prepared by employing polyaniline as a carbon precursor and KOH as an activating agent. CO(2) sorption performance of the materials is systematically investigated at the temperatures of 0, 25 and 75 °C. The prepared carbons show very high CO(2) uptake of up to 1.86 and 1.39 mmol g(-1) under 1 bar, 75 °C and 0.15 bar, 25 °C, respectively. These values are amongst the highest CO(2) capture amounts of the known carbon materials. The relation between CO(2) uptake and pore size at different temperatures is studied. An interesting and innovative point that the micropores with pore size smaller than a critical value play a crucial role in CO(2) adsorption at different temperatures is demonstrated. It is found that the higher the sorption temperature is, the smaller this critical value of pore size is. Pores smaller than 0.54 nm are manifested to determine CO(2) capture capacity at high sorption temperature, e.g. 75 °C. This research proposes a basic principle for designing highly efficient CO(2) carbon adsorbents; that is, the adsorbents should be primarily rich in extremely small micropores.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [23]
In the citing paper
“Zhang et al. pointed out that the CO2 capture capacity strongly depended on the small micropores ( < 0.54 nm) under different adsorption conditions [23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [23]
Citations
Cites
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
An overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
Progress in adsorption-based CO2capture by metal–organic frameworks
Liu, J., Thallapally, P. K., McGrail, B. P., Brown, D. R., & Liu, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15221a · Cited by 1,339
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Mason, J. A., Sumida, K., Herm, Z. R., Krishna, R., & Long, J. R. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01720a · Cited by 1,072
An, J., Geib, S. J., & Rosi, N. L. (2010) · Journal of the American Chemical Society · doi:10.1021/ja909169x · Cited by 937
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A
Saha, D., Bao, Z., Jia, F., & Deng, S. (2010) · Environmental Science & Technology · doi:10.1021/es9032309 · Cited by 816
Cited by
Biochar-based adsorbents for carbon dioxide capture: a critical review
Dissanayake, P. D., You, S., Igalavithana, A. D., Xia, Y., Bhatnagar, A., Gupta, S., Kua, H. W., Kim, S., Kwon, J.-H., Tsang, D. C. W., et al. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109582 · Cited by 489
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Metadata
- Authors
- Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z.
- Affiliations
- Shandong University of Technology (CN)
- China University of Petroleum, East China (CN)
- The University of Adelaide (AU)
- Corresponding author
- Xing, Wei
- Zhuo, Shuping
- Qiao, Shi Zhang
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 7
- Pages
- 2523
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2031931932
- Cited by
- 263
- References
- 52
- Citations by year
- 2026: 12 · 2025: 12 · 2024: 11 · 2023: 29 · 2022: 21 · 2021: 24 · 2020: 20 · 2019: 19 · 2018: 23 · 2017: 21 · 2016: 19 · 2015: 31 · 2014: 12 · 2013: 9
- FWCI
- 25.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Physical Chemistry Chemical Physics (publishedVersion)
- PubMed (publishedVersion)
- Adelaide Research & Scholarship (AR&S) (University of Adelaide) (submittedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- CO2 adsorption, microporous carbon, critical pore size, KOH activation, CO2 capture, pore size distribution, carbon adsorbents
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.