Critical role of small micropores in high CO2 uptake
The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Abstract
Microporous carbon materials with extremely small pore size are prepared by employing polyaniline as a carbon precursor and KOH as an activating agent. CO(2) sorption performance of the materials is systematically investigated at the temperatures of 0, 25 and 75 °C. The prepared carbons show very high CO(2) uptake of up to 1.86 and 1.39 mmol g(-1) under 1 bar, 75 °C and 0.15 bar, 25 °C, respectively. These values are amongst the highest CO(2) capture amounts of the known carbon materials. The relation between CO(2) uptake and pore size at different temperatures is studied. An interesting and innovative point that the micropores with pore size smaller than a critical value play a crucial role in CO(2) adsorption at different temperatures is demonstrated. It is found that the higher the sorption temperature is, the smaller this critical value of pore size is. Pores smaller than 0.54 nm are manifested to determine CO(2) capture capacity at high sorption temperature, e.g. 75 °C. This research proposes a basic principle for designing highly efficient CO(2) carbon adsorbents; that is, the adsorbents should be primarily rich in extremely small micropores.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [23]
In the citing paper
“Zhang et al. pointed out that the CO2 capture capacity strongly depended on the small micropores ( < 0.54 nm) under different adsorption conditions [23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [23]
Citations
Cites
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
An overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
Progress in adsorption-based CO2capture by metal–organic frameworks
Liu, J., Thallapally, P. K., McGrail, B. P., Brown, D. R., & Liu, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15221a · Cited by 1,339
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Mason, J. A., Sumida, K., Herm, Z. R., Krishna, R., & Long, J. R. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01720a · Cited by 1,072
An, J., Geib, S. J., & Rosi, N. L. (2010) · Journal of the American Chemical Society · doi:10.1021/ja909169x · Cited by 937
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A
Saha, D., Bao, Z., Jia, F., & Deng, S. (2010) · Environmental Science & Technology · doi:10.1021/es9032309 · Cited by 816
Cited by
Biochar-based adsorbents for carbon dioxide capture: a critical review
Dissanayake, P. D., You, S., Igalavithana, A. D., Xia, Y., Bhatnagar, A., Gupta, S., Kua, H. W., Kim, S., Kwon, J.-H., Tsang, D. C. W., et al. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109582 · Cited by 489
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Carbon dioxide adsorption based on porous materials
Sai Bhargava Reddy, M., Ponnamma, D., Sadasivuni, K. K., Kumar, B., & Abdullah, A. M. (2021) · RSC Advances · doi:10.1039/d0ra10902a · Cited by 300
Gadipelli, S., & Guo, Z. X. (2015) · ChemSusChem · doi:10.1002/cssc.201403402 · Cited by 260
Ashourirad, B., Sekizkardes, A. K., Altarawneh, S., & El-Kaderi, H. M. (2015) · Chemistry of Materials · doi:10.1021/cm504435m · Cited by 245
Rational design of tailored porous carbon-based materials for CO2 capture
Zhang, Z., Cano, Z. P., Luo, D., Dou, H., Yu, A., & Chen, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07297g · Cited by 238
Self-citationEffect of the porous structure in carbon materials for CO2 capture at atmospheric and high-pressure
Casco, M. E., Martínez-Escandell, M., Silvestre-Albero, J., & Rodríguez-Reinoso, F. (2014) · Carbon · doi:10.1016/j.carbon.2013.09.086 · Cited by 223
Abd, A. A., Othman, M. R., & Kim, J. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15121-9 · Cited by 216
Keshavarz, L., Ghaani, M. R., MacElroy, J. M. D., & English, N. J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128604 · Cited by 211
Serafin, J., Baca, M., Biegun, M., Mijowska, E., Kaleńczuk, R. J., Sreńscek-Nazzal, J., & Michalkiewicz, B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.143722 · Cited by 203
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Alhwaige, A. A., Ishida, H., & Qutubuddin, S. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01323 · Cited by 192
Wang, J., Sng, W., Yi, G., & Zhang, Y. (2015) · Chemical Communications · doi:10.1039/c5cc04702a · Cited by 189
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Li, W., Zhang, A., Jiang, X., Chen, C., Liu, Z., Song, C., & Guo, X. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01306 · Cited by 167
He, J., To, J. W. F., Psarras, P. C., Yan, H., Atkinson, T., Holmes, R. T., Nordlund, D. L., Bao, Z., & Wilcox, J. L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502491 · Cited by 164
Zhou, J. P., Li, Z., Xing, W., Shen, H., Bi, X., Zhu, T., Qiu, Z., & Zhuo, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601904 · Cited by 162
Self-citationChang, B., Shi, W., Yin, H., Zhang, S., & Yang, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.142 · Cited by 161
Efficient CO2 Capture by Porous Carbons Derived from Coconut Shell
Yang, J., Yue, L., Hu, X. D., Wang, L., Zhao, Y., Lin, Y., Sun, Y. J., DaCosta, H. F. M., & Guo, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00633 · Cited by 161
Biomass to porous carbon in one step: directly activated biomass for high performance CO 2 storage
Balahmar, N., Al-Jumialy, A. S., & Mokaya, R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01722g · Cited by 160
Dang, Y., Zhao, L., Lu, X., Xu, J., Sang, P., Guo, S., Zhu, H., & Guo, W. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.06.143 · Cited by 158
Enhancement of CO2 adsorption on phenolic resin-based mesoporous carbons by KOH activation
de Souza, L. K. C., Wickramaratne, N. P., Ello, A. S., Costa, M. J. F., da Costa, C. E. F., & Jaroniec, M. (2013) · Carbon · doi:10.1016/j.carbon.2013.08.034 · Cited by 149
Preparation of activated biomass carbon from pine sawdust for supercapacitor and CO 2 capture
Quan, C., Su, R., & Gao, N. (2020) · International Journal of Energy Research · doi:10.1002/er.5206 · Cited by 148
Kumar, K. V., Preuß, K., Lu, L., Guo, Z., & Titirici, M. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06017 · Cited by 147
Seredych, M., Jagiełło, J., & Bandosz, T. J. (2014) · Carbon · doi:10.1016/j.carbon.2014.03.024 · Cited by 144
Adeniran, B., & Mokaya, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b05020 · Cited by 142
Liu, X., Sun, C., Liu, H., Tan, W., Wang, W., & Snape, C. E. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.062 · Cited by 140
Designed porous carbon materials for efficient CO2 adsorption and separation
Zhang, X.-Q., Li, W., & Lu, A. (2015) · New Carbon Materials · doi:10.1016/s1872-5805(15)60203-7 · Cited by 139
In-situ ion-activated carbon nanospheres with tunable ultramicroporosity for superior CO2 capture
Zhang, Z., Luo, D., Lui, G., Li, G., Jiang, G., Cano, Z. P., Deng, Y., Du, X., Song, Y., Chen, Y., et al. (2018) · Carbon · doi:10.1016/j.carbon.2018.10.096 · Cited by 138
Self-citationDilokekunakul, W., Teerachawanwong, P., Klomkliang, N., Supasitmongkol, S., & Chaemchuen, S. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124413 · Cited by 136
CO2 capture from biogas by biomass-based adsorbents: A review
Aghel, B., Behaein, S., & Alobaid, F. (2022) · Fuel · doi:10.1016/j.fuel.2022.125276 · Cited by 136
Qian, D., Cheng, L., Wang, E., Li, W., & Lu, A. (2013) · ChemSusChem · doi:10.1002/cssc.201300585 · Cited by 135
Liu, S., Ma, R., Hu, X., Wang, L., Wang, X., Radosz, M., & Fan, M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02127 · Cited by 133
Chen, C., Huang, H., Yu, Y., Shi, J., He, C. Q., Albilali, R., & Pan, H. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.161 · Cited by 129
Serafin, J., Ouzzine, M., Junior, O. F. C., Sreńscek-Nazzal, J., Gómez, I. C., Azar, F.-Z., Rey-Mafull, C. A., Hotza, D., & Rambo, C. R. (2021) · Waste Management · doi:10.1016/j.wasman.2021.10.025 · Cited by 129
Cai, J., Qi, J., Yang, C., & Zhao, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500037b · Cited by 125
Yang, F., Wang, J., Liu, L., Zhang, P., Yu, W., Deng, Q., Zeng, Z., & Deng, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03995 · Cited by 122
Liu, Z., Du, Z., Song, H., Wang, C., Subhan, F., Xing, W., & Yan, Z. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.10.061 · Cited by 121
Self-citationHirst, E. A., Taylor, A., & Mokaya, R. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04409k · Cited by 117
A cost-effective synthesis of heteroatom-doped porous carbons as efficient CO 2 sorbents
Ashourirad, B., Arab, P., İslamoğlu, T., Cychosz, K. A., Thommes, M., & El‐Kaderi, H. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06251b · Cited by 117
Adeniran, B., & Mokaya, R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06539e · Cited by 117
Guo, L., Yang, J., Hu, G., Hu, X. D., Wang, L., Dong, Y., DaCosta, H. F. M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00327 · Cited by 114
Sivadas, D. L., Vijayan, S., Rajeev, R., Ninan, K. N., & Prabhakaran, K. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.057 · Cited by 111
Biomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions
Calvo-Muñoz, E. M., García‐Mateos, F. J., Rosas, J. M., Rodríguez‐Mirasol, J., & Cordero, T. (2016) · Frontiers in Materials · doi:10.3389/fmats.2016.00023 · Cited by 110
Effective nitrogen and sulfur co-doped porous carbonaceous CO2 adsorbents derived from amino acid
Shao, J., Ma, C., Zhao, J., Wang, L., & Hu, X. D. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.127750 · Cited by 109
Liu, Y., Wang, X., & Cao, M. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.07.019 · Cited by 108
Rehman, A., & Park, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.046 · Cited by 107
Chen, T., Deng, S., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015) · RSC Adv. · doi:10.1039/c5ra04937g · Cited by 104
Yang, M., Guo, L., Hu, G., Hu, X. D., Chen, J., Shen, S., Dai, W., & Fan, M. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04038 · Cited by 103
Nazir, G., Rehman, A., & Park, S. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101326 · Cited by 101
Evidence for CO2 reactive adsorption on nanoporous S- and N-doped carbon at ambient conditions
Bandosz, T. J., Seredych, M., Rodríguez-Castellón, E., Cheng, Y. Q., Daemen, L. L., & Ramirez-Cuesta, A. J. (2015) · Carbon · doi:10.1016/j.carbon.2015.10.007 · Cited by 100
Superior Selective CO 2 Adsorption of C 3 N Pores: GCMC and DFT Simulations
Li, X., Zhu, L., Xue, Q., Chang, X., Ling, C., & Xing, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09648 · Cited by 99
Self-citationAdsorption Properties of Activated Carbons Prepared from Waste CDs and DVDs
Choma, J., Marszewski, M., Osuchowski, Ł. P., Jagiełło, J., Dziura, A., & Jaroniec, M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00036 · Cited by 98
Polyurethane Foam-Based Ultramicroporous Carbons for CO2 Capture
Ge, C., Song, J., Qin, Z., Wang, J., & Fan, W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04771 · Cited by 94
Li, D., Zhou, J., Zhang, Z., Li, L., Tian, Y., Lu, Y., Qiao, Y., Li, J., & Wen, L. (2016) · Carbon · doi:10.1016/j.carbon.2016.12.039 · Cited by 95
Self-citationFunctional Biochar Synergistic Solid/Liquid-Phase CO2 Capture: A Review
Zhang, Y., Wang, S., Feng, D., Gao, J., Dong, L., Zhao, Y., Sun, S., Huang, Y., & Qin, Y. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c04372 · Cited by 91
Adeniran, B., Masika, E., & Mokaya, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03565h · Cited by 90
Superior CO 2 adsorption from waste coffee ground derived carbons
Travis, W., Gadipelli, S., & Guo, Z. (2015) · RSC Advances · doi:10.1039/c4ra13026j · Cited by 86
Adsorption–desorption of CO 2 on zeolite-Y-templated carbon at various temperatures
Gunawan, T., Wijiyanti, R., & Widiastuti, N. (2018) · RSC Advances · doi:10.1039/c8ra09200a · Cited by 86
Chomiak, K., Gryglewicz, S., Kierzek, K., & Machnikowski, J. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.07.026 · Cited by 85
Capture of carbon dioxide using solid carbonaceous and non-carbonaceous adsorbents: a review
Sharma, H., & Dhir, A. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01118-2 · Cited by 85
Carbon-based materials for CO2 capture: Their production, modification and performance
Zaker, A., Hammouda, S. B., Sun, J., Wang, X., Li, X., & Chen, D. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.109741 · Cited by 84
Sekhon, S. S., Kaur, P., & Park, J. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111173 · Cited by 83
Yuan, B., Wang, J., Chen, Y., Wu, X., Luo, H., & Deng, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08436a · Cited by 83
Zhu, M., Cai, W., Verpoort, F., & Zhou, J. (2019) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2019.03.044 · Cited by 83
Self-citationLarge-surface-area carbons derived from lotus stem waste for efficient CO2 capture
Wu, X., Zhang, C.-Y., Tian, Z., & Cai, J. (2018) · New Carbon Materials · doi:10.1016/s1872-5805(18)60338-5 · Cited by 79
Li, Y., Liu, N., Zhang, T., Wang, B., Wang, Y., Wang, L., & Wei, J. (2020) · Energy · doi:10.1016/j.energy.2020.118561 · Cited by 77
New strategy to prepare ultramicroporous carbon by ionic activation for superior CO2 capture
Liu, Z., Zhang, Z., Jia, Z., Zhao, L., Zhang, T., Xing, W., Komarneni, S., Subhan, F., & Yan, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.184 · Cited by 75
Self-citationRecent Advances in CO2 Adsorption from Air: a Review
Yang, M., Ma, C., Xu, M., Wang, S., & Xu, L. (2019) · Current Pollution Reports · doi:10.1007/s40726-019-00128-1 · Cited by 73
Castaldo, R., Avolio, R., Cocca, M., Errico, M. E., Avella, M., & Gentile, G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129463 · Cited by 73
Micro/Mesoporous Activated Carbons Derived from Polyaniline: Promising Candidates for CO2 Adsorption
Silvestre‐Albero, A., Silvestre‐Albero, J., Escandell, M. M., & Rodríguez-Reinoso, F. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5013129 · Cited by 72
Patiño, J., Gutiérrez, M. C., Carriazo, D., Ania, C. O., Fierro, J. L. G., Ferrer, M. L., & del Monte, F. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00562g · Cited by 71
Saadi, W., Rodríguez-Sánchez, S., Ruíz, B., Najar-Souissi, S., Ouederni, A., & Fuente, E. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.107010 · Cited by 71
Khan, N. A., An, H. J., Yoo, D. K., & Jhung, S. H. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.08.001 · Cited by 71
Self S-doping activated carbon derived from lignin-based pitch for removal of gaseous benzene
He, S., Shi, G., Xiao, H., Sun, G., Shi, Y., Chen, G., Dai, H., Yuan, B., Chen, X., & Yang, X. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128286 · Cited by 71
Kwiatkowski, M., Policicchio, A., Seredych, M., & Bandosz, T. J. (2015) · Carbon · doi:10.1016/j.carbon.2015.11.019 · Cited by 70
Imidazole-based hyper-cross-linked polymers derived porous carbons for CO2 capture
Shao, L., Sang, Y., & Huang, J. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.08.025 · Cited by 69
Li, D., Tian, Y., Li, L., Li, J., & Zhang, H. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0041-7 · Cited by 67
Cox, M., & Mokaya, R. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00300e · Cited by 67
Chen, C., Kosari, M., Jing, M., & He, C. Q. (2022) · Environmental Functional Materials · doi:10.1016/j.efmat.2023.01.002 · Cited by 65
An activity-based formulation for Langmuir adsorption isotherm
Chang, C.-K., Tun, H., & Chen, C. (2019) · Adsorption · doi:10.1007/s10450-019-00185-4 · Cited by 65
Tailored Gas Adsorption Properties of Electrospun Carbon Nanofibers for Gas Separation and Storage
Kretzschmar, A., Selmert, V., Weinrich, H., Kungl, H., Tempel, H., & Eichel, R. (2020) · ChemSusChem · doi:10.1002/cssc.202000520 · Cited by 65
Kim, H. S., Kang, M. S., & Yoo, W. C. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b10552 · Cited by 64
Liu, X., Sun, Y. M., Liu, J., Sun, C., Liu, H., Xue, Q., Smith, E. F., & Snape, C. E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06665 · Cited by 64
Self-citationLee, D., Zhang, C., Wei, C., Ashfeld, B. L., & Gao, H. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13424e · Cited by 62
Liu, J., Zhang, W., Jin, H., Li, Z., Liu, G., Xing, F., & Tang, L. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.160423 · Cited by 62
Park, J. M., Kim, C. M., & Jhung, S. H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127627 · Cited by 62
Tian, Y., Wang, R., Deng, S., Tao, Y., Dai, W., Zheng, Q. C., Huang, C., Xie, C., Zeng, Q., Lin, J. H., et al. (2023) · Nano Letters · doi:10.1021/acs.nanolett.3c03167 · Cited by 61
Ultra-microporous N-doped carbon from polycondensed framework precursor for CO2 adsorption
Tian, Z., Huang, J., Zhang, X., Shao, G., He, Q., Cao, S., & Yuan, S. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.08.012 · Cited by 59
Standing out the key role of ultramicroporosity to tailor biomass-derived carbons for CO2 capture
Querejeta, N., Gil, M. V., Pevida, C., & Centeno, T. A. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.04.016 · Cited by 59
Masika, E., & Mokaya, R. (2013) · RSC Advances · doi:10.1039/c3ra43420f · Cited by 58
Haffner-Staton, E., Balahmar, N., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06407h · Cited by 57
Guerrera, J. V., Burrow, J. N., Eichler, J. E., Rahman, M. Z., Namireddy, M. V., Friedman, K. A., Coffman, S. S., Calabro, D. C., & Mullins, C. B. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c00427 · Cited by 56
Shi, J., Yan, N., Cui, H., Liu, Y., Weng, Y., Li, D., & Ji, X. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.08.010 · Cited by 55
Decoding Carbon-Based Materials’ Properties for High CO 2 Capture and Selectivity
Mehra, P., & Paul, A. (2022) · ACS Omega · doi:10.1021/acsomega.2c04269 · Cited by 54
Goel, C., Bhunia, H., & Bajpai, P. K. (2015) · Journal of Environmental Sciences · doi:10.1016/j.jes.2014.12.021 · Cited by 53
Metadata
- Authors
- Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z.
- Affiliations
- Shandong University of Technology (CN)
- China University of Petroleum, East China (CN)
- The University of Adelaide (AU)
- Corresponding author
- Xing, Wei
- Zhuo, Shuping
- Qiao, Shi Zhang
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 7
- Pages
- 2523
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2031931932
- Cited by
- 263
- References
- 52
- Citations by year
- 2026: 12 · 2025: 12 · 2024: 11 · 2023: 29 · 2022: 21 · 2021: 24 · 2020: 20 · 2019: 19 · 2018: 23 · 2017: 21 · 2016: 19 · 2015: 31 · 2014: 12 · 2013: 9
- FWCI
- 25.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Physical Chemistry Chemical Physics (publishedVersion)
- PubMed (publishedVersion)
- Adelaide Research & Scholarship (AR&S) (University of Adelaide) (submittedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- CO2 adsorption, microporous carbon, critical pore size, KOH activation, CO2 capture, pore size distribution, carbon adsorbents
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.