Critical role of small micropores in high CO2 uptake
The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Abstract
Microporous carbon materials with extremely small pore size are prepared by employing polyaniline as a carbon precursor and KOH as an activating agent. CO(2) sorption performance of the materials is systematically investigated at the temperatures of 0, 25 and 75 °C. The prepared carbons show very high CO(2) uptake of up to 1.86 and 1.39 mmol g(-1) under 1 bar, 75 °C and 0.15 bar, 25 °C, respectively. These values are amongst the highest CO(2) capture amounts of the known carbon materials. The relation between CO(2) uptake and pore size at different temperatures is studied. An interesting and innovative point that the micropores with pore size smaller than a critical value play a crucial role in CO(2) adsorption at different temperatures is demonstrated. It is found that the higher the sorption temperature is, the smaller this critical value of pore size is. Pores smaller than 0.54 nm are manifested to determine CO(2) capture capacity at high sorption temperature, e.g. 75 °C. This research proposes a basic principle for designing highly efficient CO(2) carbon adsorbents; that is, the adsorbents should be primarily rich in extremely small micropores.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [23]
In the citing paper
“Zhang et al. pointed out that the CO2 capture capacity strongly depended on the small micropores ( < 0.54 nm) under different adsorption conditions [23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [23]
Citations
Cites
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
An overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
Progress in adsorption-based CO2capture by metal–organic frameworks
Liu, J., Thallapally, P. K., McGrail, B. P., Brown, D. R., & Liu, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15221a · Cited by 1,339
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Mason, J. A., Sumida, K., Herm, Z. R., Krishna, R., & Long, J. R. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01720a · Cited by 1,072
An, J., Geib, S. J., & Rosi, N. L. (2010) · Journal of the American Chemical Society · doi:10.1021/ja909169x · Cited by 937
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A
Saha, D., Bao, Z., Jia, F., & Deng, S. (2010) · Environmental Science & Technology · doi:10.1021/es9032309 · Cited by 816
Electrochemical energy storage in ordered porous carbon materials
Vix-Guterl, C., Frackowiak, E., Jurewicz, K., Friebe, M., Parmentier, J., & Béguin, F. (2005) · Carbon · doi:10.1016/j.carbon.2004.12.028 · Cited by 713
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Everett, D. H., & Powl, J. C. (1976) · Journal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases · doi:10.1039/f19767200619 · Cited by 655
Why hybrid porous solids capture greenhouse gases?
Férey, G., Serre, C., Devic, T., Maurin, G., Jobic, H., Llewellyn, P. L., De Weireld, G., Vimont, A., Daturi, M., & Chang, J.-S. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00040j · Cited by 652
Enhanced Hydrogen Storage Capacity of High Surface Area Zeolite-like Carbon Materials
Yang, Z., Xia, Y., & Mokaya, R. (2007) · Journal of the American Chemical Society · doi:10.1021/ja067149g · Cited by 622
Can Metal–Organic Framework Materials Play a Useful Role in Large‐Scale Carbon Dioxide Separations?
Keskin, S., van Heest, T. M., & Sholl, D. S. (2010) · ChemSusChem · doi:10.1002/cssc.201000114 · Cited by 610
Activated carbon for gas separation and storage
Sircar, S., Golden, T. C., & Rao, M. B. (1996) · Carbon · doi:10.1016/0008-6223(95)00128-x · Cited by 591
Hao, G.-P., Li, W.-C., Qian, D., Wang, G.-H., Zhang, W.-P., Zhang, T., Wang, A.-Q., Schüth, F., Bongard, H.-J., & Lu, A.-H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203857g · Cited by 569
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Adsorption of CO2 and CH4 on a magnesium-based metal organic framework
Bao, Z., Yu, L., Ren, Q., Lu, X., & Deng, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.09.065 · Cited by 527
Superior CO2 uptake of N-doped activated carbon through hydrogen-bonding interaction
Xing, W., Liu, C., Zhou, Z., Zhang, L., Zhou, J., Zhuo, S., Yan, Z., Gao, H., Wang, G., & Qiao, S. Z. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21653a · Cited by 500
Self-citationChue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
Surface modification of activated carbons for CO2 capture
Pevida, C., Plaza, M. G., Arias, B., Fermoso, J., Rubiera, F., & Pis, J. J. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.05.239 · Cited by 468
Concentration and recovery of carbon dioxide from flue gas by pressure swing adsorption
Kikkinides, E. S., Yang, R. T., & Cho, S. H. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00023a038 · Cited by 369
Li, Q., Yang, J., Feng, D., Wu, Z., Wu, Q., Park, S. S., Ha, C.-S., & Zhao, D. (2010) · Nano Research · doi:10.1007/s12274-010-0023-7 · Cited by 369
Azar, C., Lindgren, K., Larson, E., & Möllersten, K. (2006) · Climatic Change · doi:10.1007/s10584-005-3484-7 · Cited by 364
Xia, Y., Mokaya, R., Walker, G. S., & Zhu, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100061 · Cited by 362
Adsorption of CO2 on Amine-Functionalized Y-Type Zeolites
Su, F., Lu, C., Kuo, S.-C., & Zeng, W. (2010) · Energy & Fuels · doi:10.1021/ef901077k · Cited by 359
High‐Surface‐Area Carbon Molecular Sieves for Selective CO2 Adsorption
Wahby, A., Ramos‐Fernández, J. M., Martínez‐Escandell, M., Sepúlveda‐Escribano, A., Silvestre‐Albero, J., & Rodríguez‐Reinoso, F. (2010) · ChemSusChem · doi:10.1002/cssc.201000083 · Cited by 353
Adsorption of Ethane, Ethylene, Propane, and Propylene on a Magnesium-Based Metal–Organic Framework
Bao, Z., Alnemrat, S., Yu, L., Vasiliev, I., Ren, Q., Lu, X., & Deng, S. (2011) · Langmuir · doi:10.1021/la2030473 · Cited by 336
Silica-templated melamine–formaldehyde resin derived adsorbents for CO2 capture
Pevida, C., Drage, T. C., & Snape, C. E. (2008) · Carbon · doi:10.1016/j.carbon.2008.06.026 · Cited by 321
CO2 capture by activated and impregnated anthracites
Maroto-Valer, M. M., Tang, Z., & Zhang, Y. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.003 · Cited by 298
Drage, T. C., Arenillas, A., Smith, K. M., Pevida, C., Piippo, S., & Snape, C. E. (2007) · Fuel · doi:10.1016/j.fuel.2006.07.003 · Cited by 259
CO2 adsorption by activated templated carbons
Sevilla, M., & Fuertes, A. B. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.09.038 · Cited by 229
Fungi-based porous carbons for CO2 adsorption and separation
Wang, J., Heerwig, A., Lohe, M. R., Oschatz, M., Borchardt, L., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32139d · Cited by 220
Influence of pore geometry on the design of microporous materials for methane storage
Cracknell, R. F., Gordon, P., & Gubbins, K. E. (1993) · The Journal of Physical Chemistry · doi:10.1021/j100104a036 · Cited by 203
An Interpenetrated Framework Material with Hysteretic CO2 Uptake
Mulfort, K. L., Farha, O. K., Malliakas, C. D., Kanatzidis, M. G., & Hupp, J. T. (2010) · Chemistry – A European Journal · doi:10.1002/chem.200902104 · Cited by 200
Enhancement of CO2 adsorption on high surface area activated carbon modified by N2, H2 and ammonia
Zhang, Z., Xu, M., Wang, H., & Li, Z. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.03.070 · Cited by 194
Self-citationNovel porous carbon materials with ultrahigh nitrogen contents for selective CO2 capture
Zhao, Y., Zhao, L., Yao, K. X., Yang, Y., Zhang, Q., & Han, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33091a · Cited by 184
Highly Selective CO2 Capture by a Flexible Microporous Metal–Organic Framework (MMOF) Material
Wu, H., Reali, R. S., Smith, D. A., Trachtenberg, M. C., & Li, J. (2010) · Chemistry – A European Journal · doi:10.1002/chem.201002683 · Cited by 175
Akhtar, F., Liu, Q., Hedin, N., & Bergström, L. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21153j · Cited by 174
Efficient CO2 sorbents based on silica foam with ultra-large mesopores
Qi, G., Fu, L., Choi, B. H., & Giannelis, E. P. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21394j · Cited by 159
Zou, Y., Mata, V. G., & Rodrigues, A. E. (2001) · Adsorption · doi:10.1023/a:1011220900415 · Cited by 156
Effect of heat treatment on CO2 adsorption of KOH-activated graphite nanofibers
Meng, L., & Park, S. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.08.048 · Cited by 139
Theoretical and experimental studies of methane adsorption on microporous carbons
Chen, X. S., McEnaney, B., Mays, T. J., Alcañiz-Monge, J., Cazorla‐Amorós, D., & Linares-Solano, A. (1997) · Carbon · doi:10.1016/s0008-6223(97)00074-2 · Cited by 114
Carbon dioxide adsorption performance of N-doped zeolite Y templated carbons
Zhou, J., Li, W., Zhang, Z., Xing, W., & Zhuo, S. (2012) · RSC Adv. · doi:10.1039/c1ra00247c · Cited by 110
Self-citationCopper oxide-decorated porous carbons for carbon dioxide adsorption behaviors
Kim, B.-J., Cho, K.-S., & Park, S. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.10.045 · Cited by 104
A direct synthesis of mesoporous carbon supported MgO sorbent for CO2 capture
Bhagiyalakshmi, M., Hemalatha, P., Ganesh, M., Mei, P., & Jang, H. T. (2010) · Fuel · doi:10.1016/j.fuel.2010.10.050 · Cited by 103
Araki, S., Doi, H., Sano, Y., Tanaka, S., & Miyake, Y. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.07.024 · Cited by 102
Microporous phenol–formaldehyde resin-based adsorbents for pre-combustion CO2 capture
Martín, C. F., Plaza, M. G., García, S., Pis, J. J., Rubiera, F., & Pevida, C. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.019 · Cited by 63
Lin, L.-Y., & Bai, H. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.07.012 · Cited by 34
In situ small angle neutron scattering study of CD4 adsorption under pressure in activated carbons
Lozano‐Castelló, D., Cazorla‐Amorós, D., Linares-Solano, A., Hall, P. J., Gascon, D., & Galan, C. (2001) · Carbon · doi:10.1016/s0008-6223(00)00254-2 · Cited by 23
Cited by
Biochar-based adsorbents for carbon dioxide capture: a critical review
Dissanayake, P. D., You, S., Igalavithana, A. D., Xia, Y., Bhatnagar, A., Gupta, S., Kua, H. W., Kim, S., Kwon, J.-H., Tsang, D. C. W., et al. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109582 · Cited by 489
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Metadata
- Authors
- Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z.
- Affiliations
- Shandong University of Technology (CN)
- China University of Petroleum, East China (CN)
- The University of Adelaide (AU)
- Corresponding author
- Xing, Wei
- Zhuo, Shuping
- Qiao, Shi Zhang
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 7
- Pages
- 2523
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2031931932
- Cited by
- 263
- References
- 52
- Citations by year
- 2026: 12 · 2025: 12 · 2024: 11 · 2023: 29 · 2022: 21 · 2021: 24 · 2020: 20 · 2019: 19 · 2018: 23 · 2017: 21 · 2016: 19 · 2015: 31 · 2014: 12 · 2013: 9
- FWCI
- 25.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Physical Chemistry Chemical Physics (publishedVersion)
- PubMed (publishedVersion)
- Adelaide Research & Scholarship (AR&S) (University of Adelaide) (submittedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- CO2 adsorption, microporous carbon, critical pore size, KOH activation, CO2 capture, pore size distribution, carbon adsorbents
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.