The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Comparison of electrochemical performances of olivine NaFePO4in sodium-ion batteries and olivine LiFePO4in lithium-ion batteries
Abstract
Carbon-coated olivine NaFePO(4) (C-NaFePO(4)) spherical particles with a uniform diameter of ∼80 nm are obtained by chemical delithiation and subsequent electrochemical sodiation of carbon-coated olivine LiFePO(4) (C-LiFePO(4)), which is synthesized by a solvothermal method. The C-NaFePO(4) electrodes are identical (particle size, particle size distribution, surface coating, and active material loading, etc.) to C-LiFePO(4) except that Li ions in C-LiFePO(4) are replaced by Na ions, making them ideal for comparison of thermodynamics and kinetics between C-NaFePO(4) cathode in sodium-ion (Na-ion) batteries and C-LiFePO(4) in lithium-ion (Li-ion) batteries. In this paper, the equilibrium potentials, reaction resistances, and diffusion coefficient of Na in C-NaFePO(4) are systematically investigated by using the galvanostatic intermittent titration technique (GITT), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV), and compared to those of the well-known LiFePO(4) cathodes in Li-ion batteries. Due to the lower diffusion coefficient of Na-ion and higher contact and charge transfer resistances in NaFePO(4) cathodes, the rate performance of C-NaFePO(4) in Na-ion batteries is much worse than that of C-LiFePO(4) in Li-ion batteries. However, the cycling stability of C-NaFePO(4) is almost comparable to C-LiFePO(4) by retaining 90% of its capacity even after 100 charge-discharge cycles at a charge-discharge rate of 0.1 C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Battery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Ong, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ma, X., & Ceder, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01782a · Cited by 1,415
Electrochemical investigation of the P2–NaxCoO2 phase diagram
Berthelot, R., Carlier, D., & Delmas, C. (2011) · Nature Materials · doi:10.1038/nmat2920 · Cited by 1,232
A multifunctional 3.5 V iron-based phosphate cathode for rechargeable batteries
Ellis, B. L., Makahnouk, W. R. M., Makimura, Y., Toghill, K., & Nazar, L. F. (2007) · Nature Materials · doi:10.1038/nmat2007 · Cited by 964
Thermodynamic and Mass Transport Properties of “ LiAl ”
Wen, C. J., Boukamp, B. A., Huggins, R. A., & Weppner, W. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128939 · Cited by 888
Determination of the chemical diffusion coefficient of lithium in LiFePO4
Prosini, P. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00134-0 · Cited by 844
Cited by
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Jia, X., Liu, C., Neale, Z. G., Yang, J., & Cao, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00628 · Cited by 1,791
Fundamentals, status and promise of sodium-based batteries
Usiskin, R., Lu, Y., Popovic, J., Law, M., Balaya, P., Hu, Y.-S., & Maier, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00324-w · Cited by 1,370
An Initial Review of the Status of Electrode Materials for Potassium‐Ion Batteries
Pramudita, J. C., Sehrawat, D., Goonetilleke, D., & Sharma, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602911 · Cited by 1,045
Towards K‐Ion and Na‐Ion Batteries as “Beyond Li‐Ion”
Kubota, K., Dahbi, M., Hosaka, T., Kumakura, S., & Komaba, S. (2018) · The Chemical Record · doi:10.1002/tcr.201700057 · Cited by 1,015
Update on Na-based battery materials. A growing research path
Palomares, V., Casas-Cabanas, M., Castillo-Martínez, E., Han, M. H., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41031e · Cited by 992
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
Charge carriers in rechargeable batteries: Na ions vs. Li ions
Hong, S. Y., Kim, Y., Park, Y., Choi, A., Choi, N.-S., & Lee, K. T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40811f · Cited by 830
Challenges and Perspectives for NASICON‐Type Electrode Materials for Advanced Sodium‐Ion Batteries
Chen, S., Wu, C., Shen, L., Zhu, C., Huang, Y., Xi, K., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700431 · Cited by 705
Electrochemical Intercalation of Potassium into Graphite
Zhao, J., Zou, X., Zhu, Y., Xu, Y., & Wang, C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602248 · Cited by 647
Self-citationElectrospun Sb/C Fibers for a Stable and Fast Sodium-Ion Battery Anode
Zhu, Y., Han, X., Xu, Y., Liu, Y., Zheng, S., Xu, K., Hu, L., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn4025674 · Cited by 639
Self-citationPolyanion‐Type Electrode Materials for Sodium‐Ion Batteries
Ni, Q., Bai, Y., Wu, F., & Wu, C. (2017) · Advanced Science · doi:10.1002/advs.201600275 · Cited by 586
Progress in electrolytes for rechargeable Li-based batteries and beyond
Li, Q., Chen, J., Fan, L., Kong, X., & Lu, Y. (2016) · Green Energy & Environment · doi:10.1016/j.gee.2016.04.006 · Cited by 569
Olivine LiFePO4: the remaining challenges for future energy storage
Wang, J., & Sun, X. (2015) · Energy & Environmental Science · doi:10.1039/c4ee04016c · Cited by 550
An Advanced Sodium‐Ion Battery Composed of Carbon Coated Na3V2(PO4)3 in a Porous Graphene Network
Rui, X., Sun, W., Wu, C., Yu, Y., & Yan, Q. (2015) · Advanced Materials · doi:10.1002/adma.201502864 · Cited by 545
Choi, S. H., Ko, Y. N., Lee, J., & Kang, Y. C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402428 · Cited by 515
Dong, H., Du, W., Dong, J., Che, R., Kong, F., Cheng, W., Ma, M., Gu, N., & Zhang, Y. (2022) · Nature Communications · doi:10.1038/s41467-022-33098-y · Cited by 488
Making Li-metal electrodes rechargeable by controlling the dendrite growth direction
Liu, Y., Liu, Q., Xin, L., Liu, Y., Yang, F., Stach, E. A., & Xie, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.83 · Cited by 464
Self-citationVarious cell architectures of capacitive deionization: Recent advances and future trends
Tang, W., Liang, J., He, D., Gong, J., Tang, L., Liu, Z., Wang, D., & Zeng, G. (2019) · Water Research · doi:10.1016/j.watres.2018.11.064 · Cited by 461
High temperature electrical energy storage: advances, challenges, and frontiers
Lin, X., Salari, M., Arava, L. M. R., Ajayan, P. M., & Grinstaff, M. W. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00012f · Cited by 401
Shen, W., Wang, C., Xu, Q., Liu, H., & Wang, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400982 · Cited by 387
Self-citationPhosphate Framework Electrode Materials for Sodium Ion Batteries
Fang, Y., Zhang, J., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2017) · Advanced Science · doi:10.1002/advs.201600392 · Cited by 381
High-Energy Batteries: Beyond Lithium-Ion and Their Long Road to Commercialisation
Gao, Y., Pan, Z., Sun, J., Liu, Z., & Wang, J. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00844-2 · Cited by 378
Lithium Extraction from Seawater through Pulsed Electrochemical Intercalation
Liu, C., Li, Y., Lin, D., Hsu, P.-C., Liu, B., Yan, G., Wu, T., Cui, Y., & Chu, S. (2020) · Joule · doi:10.1016/j.joule.2020.05.017 · Cited by 365
A rechargeable aqueous Zn2+-battery with high power density and a long cycle-life
Wang, F., Hu, E., Sun, W., Gao, T., Ji, X., Fan, X., Han, F., Yang, X.-Q., Xu, K., & Wang, C. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01883a · Cited by 311
Self-citationXu, G., Amine, R., Abouimrane, A., Che, H., Dahbi, M., Ma, Z., Saadoune, I., Alami, J., Mattis, W. L., Pan, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702403 · Cited by 287
Na-ion mobility in layered Na2FePO4F and olivine Na[Fe,Mn]PO4
Tripathi, R., Wood, S. M., Islam, M. S., & Nazar, L. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40914g · Cited by 282
Bhide, A., Hofmann, J., Katharina Dürr, A., Janek, J., & Adelhelm, P. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c3cp53077a · Cited by 275
Advanced cobalt-free cathode materials for sodium-ion batteries
Chu, S., Guo, S., & Zhou, H. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00442e · Cited by 272
Mesoporous Amorphous FePO4Nanospheres as High-Performance Cathode Material for Sodium-Ion Batteries
Fang, Y., Xiao, L., Qian, J., Ai, X., Yang, H., & Cao, Y. (2014) · Nano Letters · doi:10.1021/nl501152f · Cited by 268
Liu, Y., Kang, H., Jiao, L., Chen, C., Cao, K., Wang, Y., & Yuan, H. (2015) · Nanoscale · doi:10.1039/c4nr05106h · Cited by 264
Self-citationSu, D., Kretschmer, K., & Wang, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501785 · Cited by 258
Bi, L., Li, X., Liu, X., Zheng, Q., & Lin, D. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06385 · Cited by 105
Pérez-Rodríguez, S., Milton, J. A., & Garcia-Araez, N. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b07072 · Cited by 24
Metadata
- Authors
- Zhu, Y., Xu, Y., Liu, Y., Luo, C., & Wang, C.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 5
- Issue
- 2
- Pages
- 780-787
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2111698246
- Cited by
- 500
- References
- 34
- FWCI
- 17.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.