The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Comparison of electrochemical performances of olivine NaFePO4in sodium-ion batteries and olivine LiFePO4in lithium-ion batteries
Abstract
Carbon-coated olivine NaFePO(4) (C-NaFePO(4)) spherical particles with a uniform diameter of ∼80 nm are obtained by chemical delithiation and subsequent electrochemical sodiation of carbon-coated olivine LiFePO(4) (C-LiFePO(4)), which is synthesized by a solvothermal method. The C-NaFePO(4) electrodes are identical (particle size, particle size distribution, surface coating, and active material loading, etc.) to C-LiFePO(4) except that Li ions in C-LiFePO(4) are replaced by Na ions, making them ideal for comparison of thermodynamics and kinetics between C-NaFePO(4) cathode in sodium-ion (Na-ion) batteries and C-LiFePO(4) in lithium-ion (Li-ion) batteries. In this paper, the equilibrium potentials, reaction resistances, and diffusion coefficient of Na in C-NaFePO(4) are systematically investigated by using the galvanostatic intermittent titration technique (GITT), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV), and compared to those of the well-known LiFePO(4) cathodes in Li-ion batteries. Due to the lower diffusion coefficient of Na-ion and higher contact and charge transfer resistances in NaFePO(4) cathodes, the rate performance of C-NaFePO(4) in Na-ion batteries is much worse than that of C-LiFePO(4) in Li-ion batteries. However, the cycling stability of C-NaFePO(4) is almost comparable to C-LiFePO(4) by retaining 90% of its capacity even after 100 charge-discharge cycles at a charge-discharge rate of 0.1 C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Battery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Ong, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ma, X., & Ceder, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01782a · Cited by 1,415
Electrochemical investigation of the P2–NaxCoO2 phase diagram
Berthelot, R., Carlier, D., & Delmas, C. (2011) · Nature Materials · doi:10.1038/nmat2920 · Cited by 1,232
A multifunctional 3.5 V iron-based phosphate cathode for rechargeable batteries
Ellis, B. L., Makahnouk, W. R. M., Makimura, Y., Toghill, K., & Nazar, L. F. (2007) · Nature Materials · doi:10.1038/nmat2007 · Cited by 964
Thermodynamic and Mass Transport Properties of “ LiAl ”
Wen, C. J., Boukamp, B. A., Huggins, R. A., & Weppner, W. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128939 · Cited by 888
Determination of the chemical diffusion coefficient of lithium in LiFePO4
Prosini, P. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00134-0 · Cited by 844
Particle Size Dependence of the Ionic Diffusivity
Malik, R., Burch, D., Bazant, M., & Ceder, G. (2010) · Nano Letters · doi:10.1021/nl1023595 · Cited by 778
Room-temperature single-phase Li insertion/extraction in nanoscale LixFePO4
Gibot, P., Casas-Cabanas, M., Laffont, L., Levasseur, S., Carlach, P., Hamelet, S., Tarascon, J.-M., & Masquelier, C. (2008) · Nature Materials · doi:10.1038/nmat2245 · Cited by 676
The thermodynamic origin of hysteresis in insertion batteries
Dreyer, W., Jamnik, J., Guhlke, C., Huth, R., Moškon, J., & Gaberšček, M. (2010) · Nature Materials · doi:10.1038/nmat2730 · Cited by 619
Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO2
Komaba, S., Takei, C., Nakayama, T., Ogata, A., & Yabuuchi, N. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.12.033 · Cited by 579
Structure and Stability of Sodium Intercalated Phases in Olivine FePO4
Moreau, P., Guyomard, D., Gaubicher, J., & Boucher, F. (2010) · Chemistry of Materials · doi:10.1021/cm101377h · Cited by 517
Electrochemical Insertion of Sodium into Carbon
Doeff, M. M., Ma, Y., Visco, S. J., & De Jonghe, L. C. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221153 · Cited by 514
Studies on LiFePO4 as cathode material using impedance spectroscopy
Schmidt, J. P., Chrobak, T., Ender, M., Illig, J., Klotz, D., & Ivers‐Tiffée, E. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.09.121 · Cited by 501
Study of the Insertion/Deinsertion Mechanism of Sodium into Na0.44MnO2
Sauvage, F., Laffont, L., Tarascon, J. ‐., & Baudrin, E. (2007) · Inorganic Chemistry · doi:10.1021/ic0700250 · Cited by 470
Size-Dependent Lithium Miscibility Gap in Nanoscale Li[sub 1−x]FePO[sub 4]
Meethong, N., Huang, H.-Y. S., Carter, W. C., & Chiang, Y.-M. (2007) · Electrochemical and Solid-State Letters · doi:10.1149/1.2710960 · Cited by 443
Meethong, N., Huang, H. S., Speakman, S. A., et al. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600938 · Cited by 440
Reversible NaFePO4 electrode for sodium secondary batteries
Oh, S.-M., Myung, S., Hassoun, J., Scrosati, B., & Sun, Y. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.06.014 · Cited by 425
Galvanostatic Intermittent Titration Technique for Phase-Transformation Electrodes
Zhu, Y., & Wang, C. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp9113333 · Cited by 421
Self-citationTopochemical Synthesis of Sodium Metal Phosphate Olivines for Sodium-Ion Batteries
Lee, K. T., Ramesh, T. N., Nan, F., Botton, G., & Nazar, L. F. (2011) · Chemistry of Materials · doi:10.1021/cm200450y · Cited by 309
Separation of Charge Transfer and Contact Resistance in LiFePO4-Cathodes by Impedance Modeling
Illig, J., Ender, M., Chrobak, T., Schmidt, J. P., Klotz, D., & Ivers-Tiffée, E. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.030207jes · Cited by 307
Study of the Li-insertion/extraction process in LiFePO4/FePO4
Ramana, C. V., Mauger, A., Gendron, F., Julien, C. M., & Zaghib, K. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.042 · Cited by 268
Electrochemical Performance of Sol-Gel Synthesized LiFePO[sub 4] in Lithium Batteries
Hu, Y., Doeff, M. M., Kostecki, R. M., & Fiñones, R. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1768546 · Cited by 262
Electrospinning of Highly Electroactive Carbon‐Coated Single‐Crystalline LiFePO4 Nanowires
Zhu, C., Yu, Y., Gu, L., Weichert, K., & Maier, J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005428 · Cited by 241
Direct Observation of Lithium Staging in Partially Delithiated LiFePO4 at Atomic Resolution
Gu, L., Zhu, C., Li, H., Yu, Y., Li, C., Tsukimoto, S., Maier, J., & Ikuhara, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja109412x · Cited by 239
Crystal chemistry of Na insertion/deinsertion in FePO4–NaFePO4
Casas-Cabanas, M., Roddatis, V. V., Saurel, D., Kubiak, P., Carretero-González, J., Palomares, V., Serras, P., & Rojo, T. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33639a · Cited by 229
Characterization of Na-based phosphate as electrode materials for electrochemical cells
Zaghib, K., Trottier, J., Hovington, P., Brochu, F., Guerfi, A., Mauger, A., & Julien, C. M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.061 · Cited by 224
Xia, X., & Dahn, J. R. (2011) · Electrochemical and Solid-State Letters · doi:10.1149/2.002201esl · Cited by 221
Sauvage, F., Quarez, E., Tarascon, J.-M., & Baudrin, E. (2006) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2006.05.009 · Cited by 197
Proof of Intercrystallite Ionic Transport in LiMPO4 Electrodes (M = Fe, Mn)
Lee, K. T., Kan, W. H., & Nazar, L. F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8090559 · Cited by 94
In situ investigation of electrochemical lithium intercalation into graphite powder
Wang, C., Kakwan, I., Appleby, A. J., & Little, F. E. (2000) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(00)00197-2 · Cited by 80
Self-citation
Cited by
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Jia, X., Liu, C., Neale, Z. G., Yang, J., & Cao, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00628 · Cited by 1,791
Fundamentals, status and promise of sodium-based batteries
Usiskin, R., Lu, Y., Popovic, J., Law, M., Balaya, P., Hu, Y.-S., & Maier, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00324-w · Cited by 1,370
An Initial Review of the Status of Electrode Materials for Potassium‐Ion Batteries
Pramudita, J. C., Sehrawat, D., Goonetilleke, D., & Sharma, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602911 · Cited by 1,045
Metadata
- Authors
- Zhu, Y., Xu, Y., Liu, Y., Luo, C., & Wang, C.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 5
- Issue
- 2
- Pages
- 780-787
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2111698246
- Cited by
- 500
- References
- 34
- FWCI
- 17.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.