The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Biomass derived hard carbon used as a high performance anode material for sodium ion batteries
Abstract
A porous hard carbon material was synthesized by the simple pyrolysis of H3PO4-treated biomass, i.e., pomelo peels, at 700 °C in N2. The as-obtained hard carbon had a 3D connected porous structure and a large specific surface area of 1272 m2 g−1. XPS analysis showed that the carbon material was functionalized by O-containing and P-containing groups. The porous hard carbon was used as an anode for sodium ion batteries and exhibited good cycling stability and rate capability, delivering a capacity of 181 mA h g−1 at 200 mA g−1 after 220 cycles and retaining a capacity of 71 mA h g−1 at 5 A g−1. The sodium storage mechanisms of the porous hard carbon can be explained by Na+ intercalation into the disordered graphene layers, redox reaction of the surface O-containing functional groups and Na+ storage in the nanoscale pores. However, the porous hard carbon demonstrated a low coulombic efficiency of 27%, resulting from the formation of a solid electrolyte interphase film and the side reactions of surface phosphorus groups.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Pseudocapacitive Contributions to Electrochemical Energy Storage in TiO2 (Anatase) Nanoparticles
Wang, J., Polleux, J., Lim, J., & Dunn, B. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp074464w · Cited by 5,333
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Qie, L., Chen, W., Wang, Z., Shao, Q., Li, X., Yuan, L., Hu, X., Zhang, W., & Huang, Y. (2012) · Advanced Materials · doi:10.1002/adma.201104634 · Cited by 1,656
Self-citationThe Mechanisms of Lithium and Sodium Insertion in Carbon Materials
Stevens, D. A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379565 · Cited by 1,499
Synthesis of functionalized 3D hierarchical porous carbon for high-performance supercapacitors
Qie, L., Chen, W., Xu, H., Xiong, X., Jiang, Y., Zou, F., Hu, X., Xin, Y., Zhang, Z., & Huang, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41638k · Cited by 1,147
Self-citationHollow Carbon Nanospheres with Superior Rate Capability for Sodium‐Based Batteries
Tang, K., Fu, L., White, R. J., Yu, L., Titirici, M., Antonietti, M., & Maier, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100691 · Cited by 1,104
Materials Challenges and Opportunities of Lithium Ion Batteries
Manthiram, A. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1015422 · Cited by 1,065
XPS and NMR studies of phosphoric acid activated carbons
Puziy, A. M., Poddubnaya, O. I., Socha, R. P., Gurgul, J., & Wisniewski, M. (2008) · Carbon · doi:10.1016/j.carbon.2008.09.010 · Cited by 913
An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries
Kim, Y., Park, Y., Choi, A., Choi, N., Kim, J., Lee, J., Ryu, J. H., Oh, S. M., & Lee, K. T. (2013) · Advanced Materials · doi:10.1002/adma.201204877 · Cited by 854
Na2Ti3O7: Lowest Voltage Ever Reported Oxide Insertion Electrode for Sodium Ion Batteries
Senguttuvan, P., Rousse, G., Seznec, V., Tarascon, J.-M., & Palacín, M. R. (2011) · Chemistry of Materials · doi:10.1021/cm202076g · Cited by 807
Hu, Y. ‐., Adelhelm, P., Smarsly, B. M., Hore, S., Antonietti, M., & Maier, J. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601152 · Cited by 707
Amorphous TiO2 Nanotube Anode for Rechargeable Sodium Ion Batteries
Xiong, H., Slater, M. D., Balasubramanian, M., Johnson, C. S., & Rajh, T. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2012066 · Cited by 673
Wang, H., Wu, Z., Meng, F., Ma, D., Huang, X., Wang, L., & Zhang, X. (2013) · ChemSusChem · doi:10.1002/cssc.201200680 · Cited by 639
Xiao, L., Cao, Y., Xiao, J., Wang, W., Kovarik, L., Nie, Z., & Liu, J. (2012) · Chemical Communications · doi:10.1039/c2cc17129e · Cited by 601
Synthetic carbons activated with phosphoric acid
Puziy, A. M., Poddubnaya, O. I., Martı́nez-Alonso, A., Suárez-Garcı́a, F., & Tascón, J. M. D. (2002) · Carbon · doi:10.1016/s0008-6223(01)00317-7 · Cited by 601
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie · doi:10.1002/ange.201100637 · Cited by 487
Surface chemistry of phosphorus-containing carbons of lignocellulosic origin
Puziy, A. M., Poddubnaya, O. I., Martínez-Alonso, A., Suárez-García, F., & Tascón, J. M. D. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.014 · Cited by 392
Byon, H. R., Gallant, B. M., Lee, S. W., & Shao‐Horn, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200697 · Cited by 325
Zhang, J., Xiang, J., Dong, Z., Liu, Y., Wu, Y., Xu, C., & Du, G. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.035 · Cited by 288
Surface-Driven Sodium Ion Energy Storage in Nanocellular Carbon Foams
Shao, Y., Xiao, J., Wang, W., Engelhard, M., Chen, X., Nie, Z., Gu, M., Saraf, L. V., Exarhos, G., Zhang, J.-G., et al. (2013) · Nano Letters · doi:10.1021/nl401995a · Cited by 280
Hollow Carbon Nanospheres with a High Rate Capability for Lithium‐Based Batteries
Tang, K., White, R. J., Mu, X., Titirici, M., van Aken, P. A., & Maier, J. (2012) · ChemSusChem · doi:10.1002/cssc.201100609 · Cited by 234
On the chemical structure of phosphorus compounds in phosphoric acid-activated carbon
Puziy, A. M., Poddubnaya, O. I., & Ziatdinov, A. M. (2006) · Applied Surface Science · doi:10.1016/j.apsusc.2005.10.044 · Cited by 210
Highly Disordered Carbon as a Superior Anode Material for Room‐Temperature Sodium‐Ion Batteries
Zhou, X., & Guo, Y. (2014) · ChemElectroChem · doi:10.1002/celc.201300071 · Cited by 181
Synthetic carbons activated with phosphoric acid
Puziy, A. M., Poddubnaya, O. I., Martı́nez-Alonso, A., et al. (2002) · Carbon · doi:10.1016/s0008-6223(01)00318-9 · Cited by 98
Cited by
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
A review of rechargeable batteries for portable electronic devices
Liang, Y., Zhao, C., Yuan, H., Chen, Y., Zhang, W., Huang, J., Yu, D., Liu, Y., Titirici, M., Chueh, Y., et al. (2019) · InfoMat · doi:10.1002/inf2.12000 · Cited by 1,174
Self-citationHard carbons for sodium-ion batteries: Structure, analysis, sustainability, and electrochemistry
Dou, X., Hasa, I., Saurel, D., Vaalma, C., Wu, L., Buchholz, D., Bresser, D., Komaba, S., & Passerini, S. (2019) · Materials Today · doi:10.1016/j.mattod.2018.12.040 · Cited by 1,062
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
Metadata
- Authors
- Hong, K.-L., Qie, L., Zeng, R., Yi, Z.-Q., Zhang, W., Wang, D., Yin, W., Wu, C., Fan, Q.-J., Zhang, W.-X., & Huang, Y.-H.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014-06-26
- Volume
- 2
- Issue
- 32
- Pages
- 12733
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2071442920
- Cited by
- 737
- References
- 29
- FWCI
- 26.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.