Cited by 507

The DOI matches its Crossref record; 144 of the 144 references it cites were found in a registry or an index.

Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers

Kim, Hobeom, Lim, Kyung-Geun, Lee, Tae-Woo·2016·Energy & Environmental Science

Open this paper in CoChat — free account

Abstract

This review article gives an overview of progress in planar heterojunction perovskite solar cells and the roles of interfacial layers in the device, and suggests a practical strategy to fabricate highly efficient and flexible planar heterojunction perovskite solar cells.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1039/c5ee02194d

Cites

144 of 144 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citation
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Chemical Management for Colorful, Efficient, and Stable Inorganic–Organic Hybrid Nanostructured Solar Cells
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Bright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Die Gesetze der Krystallochemie
Goldschmidt, V. M. (1926) · Die Naturwissenschaften · doi:10.1007/bf01507527 · Cited by 4,012
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Solution-processed hybrid perovskite photodetectors with high detectivity
Dou, L., Yang, Y., You, J., Hong, Z., Chang, W.-H., Li, G., & Yang, Y. (2014) · Nature Communications · doi:10.1038/ncomms6404 · Cited by 2,765
Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Self-citation
Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Excitons versus free charges in organo-lead tri-halide perovskites
D’Innocenzo, V., Grancini, G., Alcocer, M. J. P., Kandada, A. R. S., Stranks, S. D., Lee, M. M., Lanzani, G., Snaith, H. J., & Petrozza, A. (2014) · Nature Communications · doi:10.1038/ncomms4586 · Cited by 1,767
Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
High Photoluminescence Efficiency and Optically Pumped Lasing in Solution-Processed Mixed Halide Perovskite Semiconductors
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Electro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
Enhanced Photoluminescence and Solar Cell Performance via Lewis Base Passivation of Organic–Inorganic Lead Halide Perovskites
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Solvent Annealing of Perovskite‐Induced Crystal Growth for Photovoltaic‐Device Efficiency Enhancement
Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
Ball, J. M., Lee, M. M., Hey, A., & Snaith, H. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40810h · Cited by 1,662
CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar Cells
Jeng, J., Chiang, Y., Lee, M., Peng, S., Guo, T., Chen, P., & Wen, T. (2013) · Advanced Materials · doi:10.1002/adma.201301327 · Cited by 1,572
Controllable Self-Induced Passivation of Hybrid Lead Iodide Perovskites toward High Performance Solar Cells
Chen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Perovskite solar cells employing organic charge-transport layers
Malinkiewicz, O., Yella, A., Lee, Y. H., Espallargas, G. M., Graetzel, M., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.341 · Cited by 1,474
Additive Enhanced Crystallization of Solution‐Processed Perovskite for Highly Efficient Planar‐Heterojunction Solar Cells
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
You, J., Hong, Z., Yang, Y. (., Chen, Q., Cai, M., Song, T.-B., Chen, C.-C., Lu, S., Liu, Y., Zhou, H., et al. (2014) · ACS Nano · doi:10.1021/nn406020d · Cited by 1,448
Transformation of the Excited State and Photovoltaic Efficiency of CH3NH3PbI3 Perovskite upon Controlled Exposure to Humidified Air
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Extremely efficient flexible organic light-emitting diodes with modified graphene anode
Han, T.-H., Lee, Y., Choi, M.-R., Woo, S.-H., Bae, S.-H., Hong, B. H., Ahn, J.-H., & Lee, T.-W. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.318 · Cited by 1,366
Self-citation
Multicolored Organic/Inorganic Hybrid Perovskite Light‐Emitting Diodes
Kim, Y., Cho, H., Heo, J. H., Kim, T., Myoung, N., Lee, C., Im, S. H., & Lee, T. (2015) · Advanced Materials · doi:10.1002/adma.201403751 · Cited by 1,273
Self-citation
Hysteresis and transient behavior in current–voltage measurements of hybrid-perovskite absorber solar cells
Unger, E. L., Hoke, E. T., Bailie, C. D., Nguyen, W. H., Bowring, A. R., Heumüller, T., Christoforo, M. G., & McGehee, M. D. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02465f · Cited by 1,265
Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers
Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Carbon Nanotube/Polymer Composites as a Highly Stable Hole Collection Layer in Perovskite Solar Cells
Habisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Recombination Kinetics in Organic-Inorganic Perovskites: Excitons, Free Charge, and Subgap States
Stranks, S. D., Burlakov, V. M., Leijtens, T., Ball, J. M., Goriely, A., & Snaith, H. J. (2014) · Physical Review Applied · doi:10.1103/physrevapplied.2.034007 · Cited by 1,189
Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Formability of ABX 3 (X = F, Cl, Br, I) halide perovskites
Li, C., Lu, X., Ding, W., Feng, L., Gao, Y., & Guo, Z. (2008) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768108032734 · Cited by 1,161
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes
Xu, J., Buin, A., Ip, A. H., Li, W., Voznyy, O., Comin, R., Yuan, M., Jeon, S., Ning, Z., McDowell, J. J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8081 · Cited by 1,124
The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells
Sun, S., Salim, T., Mathews, N., Duchamp, M., Boothroyd, C., Xing, G., Sum, T. C., & Lam, Y. M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43161d · Cited by 1,109
Conducting tin halides with a layered organic-based perovskite structure
Mitzi, D. B., Feild, C. A., Harrison, W. T. A., & Guloy, A. M. (1994) · Nature · doi:10.1038/369467a0 · Cited by 1,100
Study on the stability of CH3NH3PbI3films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
Low-Temperature Processed Electron Collection Layers of Graphene/TiO2 Nanocomposites in Thin Film Perovskite Solar Cells
Wang, J. T.-W., Ball, J. M., Barea, E. M., Abate, A., Alexander-Webber, J. A., Huang, J., Saliba, M., Mora-Sero, I., Bisquert, J., Snaith, H. J., et al. (2014) · Nano Letters · doi:10.1021/nl403997a · Cited by 1,072
Degradation observations of encapsulated planar CH3NH3PbI3 perovskite solar cells at high temperatures and humidity
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
Comparative study on the excitons in lead-halide-based perovskite-type crystals CH3NH3PbBr3 CH3NH3PbI3
Tanaka, K., Takahashi, T., Ban, T., Kondo, T., Uchida, K., & Miura, N. (2003) · Solid State Communications · doi:10.1016/s0038-1098(03)00566-0 · Cited by 975
Effect of LiF/metal electrodes on the performance of plastic solar cells
Brabec, C. J., Shaheen, S. E., Winder, C., Sariciftci, N. S., & Denk, P. (2002) · Applied Physics Letters · doi:10.1063/1.1446988 · Cited by 945
Ultrasmooth organic–inorganic perovskite thin-film formation and crystallization for efficient planar heterojunction solar cells
Zhang, W., Saliba, M., Moore, D. T., Pathak, S. K., Hörantner, M. T., Stergiopoulos, T., Stranks, S. D., Eperon, G. E., Alexander-Webber, J. A., Abate, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms7142 · Cited by 920
Retarding the crystallization of PbI2for highly reproducible planar-structured perovskite solar cells via sequential deposition
Wu, Y., Islam, A., Yang, X., Qin, C., Liu, J., Zhang, K., Peng, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01624f · Cited by 887
High‐Performance Perovskite–Graphene Hybrid Photodetector
Lee, Y., Kwon, J., Hwang, E., Ra, C., Yoo, W. J., Ahn, J., Park, J. H., & Cho, J. H. (2015) · Advanced Materials · doi:10.1002/adma.201402271 · Cited by 861
Trap‐Assisted Non‐Radiative Recombination in Organic–Inorganic Perovskite Solar Cells
Wetzelaer, G. A. H., Scheepers, M., Sempere, A. M., Momblona, C., Ávila, J., & Bolink, H. J. (2015) · Advanced Materials · doi:10.1002/adma.201405372 · Cited by 849
Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process
Wang, Q., Shao, Y., Dong, Q., Xiao, Z., Yuan, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00233d · Cited by 832
Moisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
Voltage output of efficient perovskite solar cells with high open-circuit voltage and fill factor
Ryu, S., Noh, J. H., Jeon, N. J., Chan Kim, Y., Yang, W. S., Seo, J., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00762j · Cited by 780
Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition
Barrows, A. T., Pearson, A. J., Kwak, C. K., Dunbar, A. D. F., Buckley, A. R., & Lidzey, D. G. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01546k · Cited by 765
Tris(2-(1 H-pyrazol-1-yl)pyridine)cobalt(III) as p-Type Dopant for Organic Semiconductors and Its Application in Highly Efficient Solid-State Dye-Sensitized Solar Cells
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
A dopant-free hole-transporting material for efficient and stable perovskite solar cells
Liu, J., Wu, Y., Qin, C., Yang, X., Yasuda, T., Islam, A., Zhang, K., Peng, W., Chen, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01589d · Cited by 719
A Fast Deposition‐Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin‐Film Solar Cells
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie · doi:10.1002/ange.201405334 · Cited by 714
Interface energetics in organo-metal halide perovskite-based photovoltaic cells
Schulz, P., Edri, E., Kirmayer, S., Hodes, G., Cahen, D., & Kahn, A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00168k · Cited by 710
Perovskite‐Based Hybrid Solar Cells Exceeding 10% Efficiency with High Reproducibility Using a Thin Film Sandwich Approach
Conings, B., Baeten, L., De Dobbelaere, C., D'Haen, J., Manca, J., & Boyen, H. (2014) · Advanced Materials · doi:10.1002/adma.201304803 · Cited by 691
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Kim, B. J., Kim, D. H., Lee, Y.-Y., Shin, H.-W., Han, G. S., Hong, J. S., Mahmood, K., Ahn, T. K., Joo, Y.-C., Hong, K. S., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02441a · Cited by 679
Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
Seo, J., Park, S., Chan Kim, Y., Jeon, N. J., Noh, J. H., Yoon, S. C., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01216j · Cited by 677
Enhanced Photovoltaic Performance of CH3NH3PbI3Perovskite Solar Cells through Interfacial Engineering Using Self-Assembling Monolayer
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
High performance hybrid solar cells sensitized by organolead halide perovskites
Cai, B., Xing, Y., Yang, Z., Zhang, W.-H., & Qiu, J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40343b · Cited by 655
Layered organic–inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering
Cheng, Z., & Lin, J. (2010) · CrystEngComm · doi:10.1039/c001929a · Cited by 633
Enhancement of Perovskite-Based Solar Cells Employing Core–Shell Metal Nanoparticles
Zhang, W., Saliba, M., Stranks, S. D., Sun, Y., Shi, X., Wiesner, U., & Snaith, H. J. (2013) · Nano Letters · doi:10.1021/nl4024287 · Cited by 598
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Ye, S., Sun, W., Li, Y., Yan, W., Peng, H., Bian, Z., Liu, Z., & Huang, C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00116 · Cited by 564
Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells
Choi, H., Jeong, J., Kim, H.-B., Kim, S., Walker, B., Kim, G.-H., & Kim, J. Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.04.017 · Cited by 544
Self-citation
High Open-Circuit Voltage Solar Cells Based on Organic–Inorganic Lead Bromide Perovskite
Edri, E., Kirmayer, S., Cahen, D., & Hodes, G. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400348q · Cited by 541
Planar CH3NH3PbBr3 Hybrid Solar Cells with 10.4% Power Conversion Efficiency, Fabricated by Controlled Crystallization in the Spin‐Coating Process
Heo, J. H., Song, D. H., & Im, S. H. (2014) · Advanced Materials · doi:10.1002/adma.201403140 · Cited by 497
Flexible high efficiency perovskite solar cells
Roldán-Carmona, C., Malinkiewicz, O., Soriano, A., Mínguez Espallargas, G., Garcia, A., Reinecke, P., Kroyer, T., Dar, M. I., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43619e · Cited by 476
Planar CH3NH3PbI3 Perovskite Solar Cells with Constant 17.2% Average Power Conversion Efficiency Irrespective of the Scan Rate
Heo, J. H., Song, D. H., Han, H. J., Kim, S. Y., Kim, J. H., Kim, D., Shin, H. W., Ahn, T. K., Wolf, C., Lee, T., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500048 · Cited by 474
Self-citation
Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructures
Bi, D., Moon, S.-J., Häggman, L., Boschloo, G., Yang, L., Johansson, E. M. J., Nazeeruddin, M. K., Grätzel, M., & Hagfeldt, A. (2013) · RSC Advances · doi:10.1039/c3ra43228a · Cited by 474
Magnetoabsorption of the lowest exciton in perovskite-type compound (CH3NH3)PbI3
Hirasawa, M., Ishihara, T., Goto, T., Uchida, K., & Miura, N. (1994) · Physica B: Condensed Matter · doi:10.1016/0921-4526(94)91130-4 · Cited by 459
p-type Mesoscopic Nickel Oxide/Organometallic Perovskite Heterojunction Solar Cells
Wang, K.-C., Jeng, J.-Y., Shen, P.-S., Chang, Y.-C., Diau, E. W.-G., Tsai, C.-H., Chao, T.-Y., Hsu, H.-C., Lin, P.-Y., Chen, P., et al. (2014) · Scientific Reports · doi:10.1038/srep04756 · Cited by 444
Room-temperature crystallization of hybrid-perovskite thin films via solvent–solvent extraction for high-performance solar cells
Zhou, Y., Yang, M., Wu, W., Vasiliev, A. L., Zhu, K., & Padture, N. P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00477b · Cited by 436
Nanocrystalline Rutile Electron Extraction Layer Enables Low-Temperature Solution Processed Perovskite Photovoltaics with 13.7% Efficiency
Yella, A., Heiniger, L.-P., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nano Letters · doi:10.1021/nl500399m · Cited by 430
Optical properties of PbI-based perovskite structures
Ishihara, T. (1994) · Journal of Luminescence · doi:10.1016/0022-2313(94)90145-7 · Cited by 426
Electronic Properties of Meso-Superstructured and Planar Organometal Halide Perovskite Films: Charge Trapping, Photodoping, and Carrier Mobility
Leijtens, T., Stranks, S. D., Eperon, G. E., Lindblad, R., Johansson, E. M. J., McPherson, I. J., Rensmo, H., Ball, J. M., Lee, M. M., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn502115k · Cited by 426
A diketopyrrolopyrrole-containing hole transporting conjugated polymer for use in efficient stable organic–inorganic hybrid solar cells based on a perovskite
Kwon, Y. S., Lim, J., Yun, H.-J., Kim, Y.-H., & Park, T. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44174a · Cited by 403
Virus-templated self-assembled single-walled carbon nanotubes for highly efficient electron collection in photovoltaic devices
Dang, X., Yi, H., Ham, M.-H., Qi, J., Yun, D. S., Ladewski, R., Strano, M. S., Hammond, P. T., & Belcher, A. M. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.50 · Cited by 396
Effect of CH3NH3PbI3thickness on device efficiency in planar heterojunction perovskite solar cells
Liu, D., Gangishetty, M. K., & Kelly, T. L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02637c · Cited by 393
An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive
Zuo, C., & Ding, L. (2014) · Nanoscale · doi:10.1039/c4nr02425g · Cited by 385
High‐Efficiency Solution‐Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer
Zhao, D., Sexton, M., Park, H., Baure, G., Nino, J. C., & So, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401855 · Cited by 380
Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor
Wu, Z., Bai, S., Xiang, J., Yuan, Z., Yang, Y., Cui, W., Gao, X., Liu, Z., Jin, Y., & Sun, B. (2014) · Nanoscale · doi:10.1039/c4nr03181d · Cited by 378
Highly Efficient Electron Transport Obtained by Doping PCBM with Graphdiyne in Planar-Heterojunction Perovskite Solar Cells
Kuang, C., Tang, G., Jiu, T., Yang, H., Liu, H., Li, B., Luo, W., Li, X., Zhang, W., Lu, F., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00787 · Cited by 376
Enhanced Environmental Stability of Planar Heterojunction Perovskite Solar Cells Based on Blade‐Coating
Kim, J. H., Williams, S. T., Cho, N., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401229 · Cited by 366
Low-temperature SnO2-based electron selective contact for efficient and stable perovskite solar cells
Song, J., Zheng, E., Bian, J., Wang, X.-F., Tian, W., Sanehira, Y., & Miyasaka, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01207d · Cited by 366
Highly efficient and stable planar perovskite solar cells with reduced graphene oxide nanosheets as electrode interlayer
Yeo, J.-S., Kang, R., Lee, S., Jeon, Y.-J., Myoung, N., Lee, C.-L., Kim, D.-Y., Yun, J.-M., Seo, Y.-H., Kim, S.-S., et al. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.022 · Cited by 358
Roles of Fullerene‐Based Interlayers in Enhancing the Performance of Organometal Perovskite Thin‐Film Solar Cells
Liang, P., Chueh, C., Williams, S. T., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402321 · Cited by 353
Vacuum-Assisted Thermal Annealing of CH3NH3PbI3for Highly Stable and Efficient Perovskite Solar Cells
Xie, F. X., Zhang, D., Su, H., Ren, X., Wong, K. S., Grätzel, M., & Choy, W. C. H. (2015) · ACS Nano · doi:10.1021/nn505978r · Cited by 351
Solvent engineering towards controlled grain growth in perovskite planar heterojunction solar cells
Rong, Y., Tang, Z., Zhao, Y., Zhong, X., Venkatesan, S., Graham, H., Patton, M., Jing, Y., Guloy, A. M., & Yao, Y. (2015) · Nanoscale · doi:10.1039/c5nr02866c · Cited by 343
Nanostructured TiO2/CH3NH3PbI3 heterojunction solar cells employing spiro-OMeTAD/Co-complex as hole-transporting material
Noh, J. H., Jeon, N. J., Choi, Y. C., Nazeeruddin, M. K., Grätzel, M., & Seok, S. I. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12681a · Cited by 341
Solution Deposition‐Conversion for Planar Heterojunction Mixed Halide Perovskite Solar Cells
Docampo, P., Hanusch, F. C., Stranks, S. D., Döblinger, M., Feckl, J. M., Ehrensperger, M., Minar, N. K., Johnston, M. B., Snaith, H. J., & Bein, T. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400355 · Cited by 341
Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process
Chiang, C.-H., Tseng, Z.-L., & Wu, C.-G. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03674c · Cited by 338
Binary‐Metal Perovskites Toward High‐Performance Planar‐Heterojunction Hybrid Solar Cells
Zuo, F., Williams, S. T., Liang, P., Chueh, C., Liao, C., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201401641 · Cited by 335
Hole Transport Materials with Low Glass Transition Temperatures and High Solubility for Application in Solid-State Dye-Sensitized Solar Cells
Leijtens, T., Ding, I.-K., Giovenzana, T., Bloking, J. T., McGehee, M. D., & Sellinger, A. (2012) · ACS Nano · doi:10.1021/nn204296b · Cited by 333
Tuning Perovskite Morphology by Polymer Additive for High Efficiency Solar Cell
Chang, C.-Y., Chu, C.-Y., Huang, Y.-C., Huang, C.-W., Chang, S.-Y., Chen, C.-A., Chao, C.-Y., & Su, W.-F. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00052 · Cited by 325
Low Noise, IR‐Blind Organohalide Perovskite Photodiodes for Visible Light Detection and Imaging
Lin, Q., Armin, A., Lyons, D. M., Burn, P. L., & Meredith, P. (2015) · Advanced Materials · doi:10.1002/adma.201405171 · Cited by 324
Understanding the formation and evolution of interdiffusion grown organolead halide perovskite thin films by thermal annealing
Bi, C., Shao, Y., Yuan, Y., Xiao, Z., Wang, C., Gao, Y., & Huang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04007d · Cited by 316
Doped hole transport layer for efficiency enhancement in planar heterojunction organolead trihalide perovskite solar cells
Wang, Q., Bi, C., & Huang, J. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.029 · Cited by 309
Efficient planar-heterojunction perovskite solar cells achieved via interfacial modification of a sol–gel ZnO electron collection layer
Kim, J., Kim, G., Kim, T. K., Kwon, S., Back, H., Lee, J., Lee, S. H., Kang, H., & Lee, K. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03954h · Cited by 305
Efficient Planar Heterojunction Perovskite Solar Cells Based on Formamidinium Lead Bromide
Hanusch, F. C., Wiesenmayer, E., Mankel, E., Binek, A., Angloher, P., Fraunhofer, C., Giesbrecht, N., Feckl, J. M., Jaegermann, W., Johrendt, D., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501237m · Cited by 301
Mixed solvents for the optimization of morphology in solution-processed, inverted-type perovskite/fullerene hybrid solar cells
Kim, H.-B., Choi, H., Jeong, J., Kim, S., Walker, B., Song, S., & Kim, J. Y. (2014) · Nanoscale · doi:10.1039/c4nr00130c · Cited by 298
Self-citation
Interface Engineering of Perovskite Hybrid Solar Cells with Solution-Processed Perylene–Diimide Heterojunctions toward High Performance
Min, J., Zhang, Z.-G., Hou, Y., Ramirez Quiroz, C. O., Przybilla, T., Bronnbauer, C., Guo, F., Forberich, K., Azimi, H., Ameri, T., et al. (2015) · Chemistry of Materials · doi:10.1021/cm5037919 · Cited by 250
Low-Temperature and Solution-Processed Amorphous WOX as Electron-Selective Layer for Perovskite Solar Cells
Wang, K., Shi, Y., Dong, Q., Li, Y., Wang, S., Yu, X., Wu, M., & Ma, T. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00010 · Cited by 249
Efficient and stable planar heterojunction perovskite solar cells with an MoO3/PEDOT:PSS hole transporting layer
Hou, F., Su, Z., Jin, F., Yan, X., Wang, L., Zhao, H., Zhu, J., Chu, B., & Li, W. (2015) · Nanoscale · doi:10.1039/c5nr01864a · Cited by 247
Efficient Planar Perovskite Solar Cells Based on 1.8 eV Band Gap CH3NH3PbI2Br Nanosheets via Thermal Decomposition
Zhao, Y., & Zhu, K. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5071398 · Cited by 242
Influence of Thermal Processing Protocol upon the Crystallization and Photovoltaic Performance of Organic–Inorganic Lead Trihalide Perovskites
Saliba, M., Tan, K. W., Sai, H., Moore, D. T., Scott, T., Zhang, W., Estroff, L. A., Wiesner, U., & Snaith, H. J. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500717w · Cited by 241
A dopant-free organic hole transport material for efficient planar heterojunction perovskite solar cells
Liu, Y., Chen, Q., Duan, H.-S., Zhou, H., Yang, Y. (., Chen, H., Luo, S., Song, T.-B., Dou, L., Hong, Z., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02502h · Cited by 238
Identification of Trap States in Perovskite Solar Cells
Baumann, A., Väth, S., Rieder, P., Heiber, M. C., Tvingstedt, K., & Dyakonov, V. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00953 · Cited by 238
Layer‐by‐Layer Growth of CH3NH3PbI3−xClx for Highly Efficient Planar Heterojunction Perovskite Solar Cells
Chen, Y., Chen, T., & Dai, L. (2015) · Advanced Materials · doi:10.1002/adma.201404147 · Cited by 237
Electronic properties of three- and low-dimensional semiconducting materials with Pb halide and Sn halide units
Koutselas, I. B., Ducasse, L., & Papavassiliou, G. C. (1996) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/8/9/012 · Cited by 231
Temperature dependence of hole conductor free formamidinium lead iodide perovskite based solar cells
Aharon, S., Dymshits, A., Rotem, A., & Etgar, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05149a · Cited by 228
High‐Performance Planar Perovskite Optoelectronic Devices: A Morphological and Interfacial Control by Polar Solvent Treatment
Yu, J. C., Kim, D. B., Baek, G., Lee, B. R., Jung, E. D., Lee, S., Chu, J. H., Lee, D., Choi, K. J., Cho, S., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500465 · Cited by 221
Interfacial Electron Transfer Barrier at Compact TiO2/CH3NH3PbI3Heterojunction
Xing, G., Wu, B., Chen, S., Chua, J., Yantara, N., Mhaisalkar, S., Mathews, N., & Sum, T. C. (2015) · Small · doi:10.1002/smll.201403719 · Cited by 221
Electronic Level Alignment in Inverted Organometal Perovskite Solar Cells
Schulz, P., Whittaker‐Brooks, L. L., MacLeod, B. A., Olson, D. C., Loo, Y., & Kahn, A. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201400532 · Cited by 208
Highly efficient fullerene/perovskite planar heterojunction solar cells via cathode modification with an amino-functionalized polymer interlayer
Xue, Q., Hu, Z., Liu, J., Lin, J., Sun, C., Chen, Z., Duan, C., Wang, J., Liao, C., Lau, W. M., et al. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta05352d · Cited by 198
Hole-transport material variation in fully vacuum deposited perovskite solar cells
Polander, L. E., Pahner, P., Schwarze, M., Saalfrank, M., Koerner, C., & Leo, K. (2014) · APL Materials · doi:10.1063/1.4889843 · Cited by 194
Low-temperature processed high-performance flexible perovskite solar cells via rationally optimized solvent washing treatments
Jung, J. W., Williams, S. T., & Jen, A. K.-Y. (2014) · RSC Adv. · doi:10.1039/c4ra13212b · Cited by 194
Metal‐Oxide‐Free Methylammonium Lead Iodide Perovskite‐Based Solar Cells: the Influence of Organic Charge Transport Layers
Malinkiewicz, O., Roldán‐Carmona, C., Soriano, A., Bandiello, E., Camacho, L., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400345 · Cited by 186
Fabrication of metal-oxide-free CH3NH3PbI3perovskite solar cells processed at low temperature
Ryu, S., Seo, J., Shin, S. S., Kim, Y. C., Jeon, N. J., Noh, J. H., & Seok, S. I. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00011d · Cited by 173
The roles of alkyl halide additives in enhancing perovskite solar cell performance
Chueh, C., Liao, C., Zuo, F., Williams, S. T., Liang, P., & Jen, A. K. ‐. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05012f · Cited by 156
Additive to regulate the perovskite crystal film growth in planar heterojunction solar cells
Song, X. Y., Wang, W., Sun, P., Ma, W., & Chen, Z. (2015) · Applied Physics Letters · doi:10.1063/1.4906073 · Cited by 140
Non-Thermal Annealing Fabrication of Efficient Planar Perovskite Solar Cells with Inclusion of NH4Cl
Chen, Y., Zhao, Y., & Liang, Z. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00041 · Cited by 131
Fatigue resistance of a flexible, efficient, and metal oxide-free perovskite solar cell
Poorkazem, K., Liu, D., & Kelly, T. L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00084j · Cited by 120
Improving the TiO 2 electron transport layer in perovskite solar cells using acetylacetonate-based additives
Wang, H.-H., Chen, Q. H., Zhou, H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06394e · Cited by 115
Roles of Interlayers in Efficient Organic Photovoltaic Devices
Park, J. H., Lee, T., Chin, B., Wang, D. H., & Park, O. O. (2010) · Macromolecular Rapid Communications · doi:10.1002/marc.201000310 · Cited by 112
Self-citation
Thermal Assisted Oxygen Annealing for High Efficiency Planar CH3NH3PbI3 Perovskite Solar Cells
Ren, Z., Ng, A., Shen, Q., Gokkaya, H. C., Wang, J., Yang, L., Yiu, W. K., Bai, G., Djurišić, A. B., Leung, W. W., et al. (2014) · Scientific Reports · doi:10.1038/srep06752 · Cited by 112
High-performance and high-durability perovskite photovoltaic devices prepared using ethylammonium iodide as an additive
Hsu, H., Chang, C.-C., Chen, C., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01563d · Cited by 94
Enhanced efficiency of organic and perovskite photovoltaics from shape-dependent broadband plasmonic effects of silver nanoplates
Hsu, H., Juang, T., Chen, C.-P., Hsieh, C., Yang, C., Huang, C., & Jeng, R. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.04.021 · Cited by 91
TCO-free flexible organo metal trihalide perovskite planar-heterojunction solar cells
Dianetti, M., Giacomo, F. D., Polino, G., Ciceroni, C., Liscio, A., D’Epifanio, A., Licoccia, S., Brown, T. M., Carlo, A. D., & Brunetti, F. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.03.016 · Cited by 79
Organic solvent vapor sensitive methylammonium lead trihalide film formation for efficient hybrid perovskite solar cells
Lian, J., Wang, Q., Yuan, Y., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01595b · Cited by 79
Efficient Perovskite Hybrid Solar Cells Through a Homogeneous High‐Quality Organolead Iodide Layer
Wang, K., Liu, C., Du, P., et al. (2015) · Small · doi:10.1002/smll.201403399 · Cited by 54
High-efficiency polymer photovoltaic cells using a solution-processable insulating interfacial nanolayer: the role of the insulating nanolayer
Lim, K., Choi, M., Kim, H.-B., Park, J. H., & Lee, T. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm35016e · Cited by 42
Self-citation

Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module
Bu, T., Li, J., Zheng, F., Chen, W., Wen, X., Ku, Z., Peng, Y., Zhong, J., Cheng, Y.-B., & Huang, F. (2018) · Nature Communications · doi:10.1038/s41467-018-07099-9 · Cited by 815
Efficient Visible Quasi‐2D Perovskite Light‐Emitting Diodes
Byun, J., Cho, H., Wolf, C., Jang, M., Sadhanala, A., Friend, R. H., Yang, H., & Lee, T. (2016) · Advanced Materials · doi:10.1002/adma.201601369 · Cited by 655
Self-citation
Molecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579

See all 507

Authors: Kim, H., Lim, K.-G., & Lee, T.-W.
Venue: Energy & Environmental Science
Publisher: Royal Society of Chemistry (RSC)
Published: 2016
Volume: 9
Issue: 1
Pages: 12-30
ISSN: 1754-5692 (ISSN-L)
1754-5706
DOI: 10.1039/c5ee02194d
OpenAlex: W2158163016
Cited by: 507
References: 144
FWCI: 37.21
Type: journal article
Language: en
Open access: closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.

Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Self-check

Citations

Cites

Cited by

Metadata

Record

About these checks

Data sources