Super tough poly(lactic acid) blends: a comprehensive review
Open accessThe DOI matches its Crossref record; 261 of the 261 references it cites were found in a registry or an index.
Abstract
PLA is a renewable, bio-based, and biodegradable aliphatic thermoplastic polyester that is considered a promising alternative to petrochemical-derived polymers in a wide range of commodity and engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures















![Fig. 16 Notched impact strength of PLAs and PLA/EGMA blends [C: complete break, P: partial break]. Ref. 142, copyright 2009. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/570b6dcf3cb643b6843e73a4d3c3f745/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-16.jpg)








































![Fig. 57 TEM images of room-temperature notched surfaces of PLA-based materials containing 10 wt% of P[CL-co-LA] copolyester without silica nanoparticles (a), with 5 wt% (b and b′) and 10 wt% of silica nanoparticles (c and c′). Scale bar: 0.5 μm (a–c) and 100 nm (b'and c′). Ref. 260, copyright 2013. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/d3a74a25371d4ef0ba1d9bd1756379e9/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-57.jpg)


Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It has also been reported that in brittle polymers, when multiple crazing mechanism dominates, the size of the dispersed phase in the matrix is about 2–3 μm.8”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [8]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To overcome the brittleness of PLA, several strategies have been employed, such as copolymerization, 14 blending with softer (e.g.PCL) or rubber-like polymers, chemical modification, and the addition of additives.15,16”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [16]
The cited source says what the claim attributes to it.
In the citing paper
“PLA properties such as the Tg, melting temperature (Tm),5,8,9 crystallinity,10,11 hydrophilicity,12 and ductility13,14 are reported to be improved using this approach.”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–261 of 261
Zhang, X., Li, Y., Han, L., Han, C., Xu, K., Zhou, C., Zhang, M., & Dong, L. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23507 · Cited by 41
Miscibility studies of polymer blends by viscometry methods
Lizymol, P. P., & Thomas, S. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070510407 · Cited by 41
Lebarbé, T., Grau, É., Alfos, C., & Cramail, H. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.007 · Cited by 40
Martin, P., Maquet, C., Legras, R., Bailly, C., Leemans, L., van Gurp, M., & van Duin, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.031 · Cited by 39
Li, S., Xia, J., Xu, Y., Yang, X., Mao, W. B., & Huang, K. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.01.031 · Cited by 39
Wang, X., Mi, J., Wang, J., Zhou, H., & Wang, X. (2018) · RSC Advances · doi:10.1039/c8ra07510g · Cited by 39
Self-citationSui, G., Wang, K., Xu, S., Liu, Z., Zhang, Q., Du, R., & Fu, Q. (2019) · Polymer · doi:10.1016/j.polymer.2019.02.044 · Cited by 39
Polymer–polymer miscibility and partial solvation parameters
Panayiotou, C. G. (2013) · Polymer · doi:10.1016/j.polymer.2013.01.028 · Cited by 38
The Effect of Core–Shell Ratio of Acrylic Impact Modifier on Toughening PLA
Li, W., Zhang, Y., Wu, D., Li, Z., Zhang, H., Dong, L., Sun, S., Deng, Y., & Zhang, H. (2015) · Advances in Polymer Technology · doi:10.1002/adv.21632 · Cited by 38
Feng, L., Bian, X., Li, G., Chen, Z., & Chen, X. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.12.017 · Cited by 38
Decol, M., Pachekoski, W. M., & Becker, D. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.45813 · Cited by 38
Si, W., An, X.-P., Zeng, J., Chen, Y., & Wang, Y. (2017) · Science China Materials · doi:10.1007/s40843-017-9111-1 · Cited by 38
Persenaire, O., Quintana, R., Lemmouchi, Y., Sampson, J., Martin, S., Bonnaud, L., & Dubois, P. (2014) · Polymer International · doi:10.1002/pi.4700 · Cited by 37
Bian, Y., Han, C., Han, L., Lin, H., Zhang, H., Bian, J., & Dong, L. (2014) · RSC Advances · doi:10.1039/c4ra06199c · Cited by 36
Brito, G. D. F., Agrawal, P., & de Mélo, T. J. A. (2016) · Macromolecular Symposia · doi:10.1002/masy.201500158 · Cited by 36
Si, W.-J., Yang, L., Zhu, J., Li, Y.-D., & Zeng, J.-B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.03.297 · Cited by 36
Ojijo, V. O., Ray, S. S., & Sadiku, E. R. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300306 · Cited by 35
Effect of epoxidized palm oil on the mechanical and morphological properties of a PLA–PCL blend
Al-Mulla, E. A. J., Ibrahim, N. A., Shameli, K., Ahmad, M. B., & Yunus, W. M. Z. W. (2013) · Research on Chemical Intermediates · doi:10.1007/s11164-012-0994-y · Cited by 35
Zhang, L., Xiong, Z., Shams, S., Yu, R., Huang, J., Zhang, R., & Zhu, J. (2015) · Polymer · doi:10.1016/j.polymer.2015.03.032 · Cited by 35
Thangavel, G., Mohanty, S., & Nayak, S. K. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8509-4 · Cited by 33
Li, S., & Woo, E. M. (2008) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21567 · Cited by 33
Ma, P., Hristova‐Bogaerds, D. G., Schmit, P., Goossens, H., & Lemstra, P. J. (2012) · Polymer International · doi:10.1002/pi.4204 · Cited by 33
Non-planar ring contained polyester modifying polylactide to pursue high toughness
Qiu, J., Liu, F., Zhang, J., Na, H., & Zhu, J. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.03.014 · Cited by 33
The separate roles of phase structure and interfacial adhesion in toughening a brittle polymer
Liu, N. C., & Baker, W. E. (1992) · Polymer Engineering and Science · doi:10.1002/pen.760322207 · Cited by 31
Phetwarotai, W., Maneechot, H., Kalkornsurapranee, E., & Phusunti, N. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4321 · Cited by 31
New cavitation mechanism of rubber dispersed polystyrene
Okamoto, Y., Miyagi, H., & Mitsui, S. (1993) · Macromolecules · doi:10.1021/ma00076a036 · Cited by 30
Han, L., Han, C., & Dong, L. (2013) · Polymer International · doi:10.1002/pi.4300 · Cited by 30
Zhao, X., Ding, Z., Lin, Q., Peng, S., & Fang, P. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44383 · Cited by 30
Self-citationDai, J., Bai, H., Liu, Z., Chen, L., Zhang, Q., & Fu, Q. (2016) · RSC Advances · doi:10.1039/c6ra00051g · Cited by 29
Luo, Y., Ju, Y., Bai, H., Liu, Z., Zhang, Q., & Fu, Q. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b03976 · Cited by 29
Bao, R., Jiang, W., Liu, Z., Yang, W. M., Xie, B., & Yang, M. (2015) · RSC Advances · doi:10.1039/c5ra02575c · Cited by 28
Pluta, M., & Piórkowska, E. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.11.011 · Cited by 28
Zhao, Y., Zhang, Y., Li, Z., Pan, H., Dong, Q., Han, L., Zhang, H., & Dong, L. (2016) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-015-0202-z · Cited by 28
Al‐Ghamdi, A., Melibari, M., & Al‐Saigh, Z. Y. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24226 · Cited by 27
Effects of Metal Ion Type on Ionomer-Assisted Reactive Toughening of Poly(lactic acid)
Liu, H., Guo, X., Song, W., & Zhang, J. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie303317k · Cited by 27
Crazing mechanisms and craze healing in glassy polymers
Plummer, C. J. G., & Donald, A. M. (1989) · Journal of Materials Science · doi:10.1007/pl00020228 · Cited by 27
Toughening mechanism of polymer blends: Influence of voiding ability of dispersed-phase particles
Liang, H., Jiang, W. J., Zhang, J., & Jiang, B. (1996) · Journal of Applied Polymer Science · Cited by 27
Wu, J., Kuo, M. C., & Chen, C. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42378 · Cited by 26
Singla, R. K., Maiti, S. N., & Ghosh, A. K. (2016) · RSC Advances · doi:10.1039/c5ra24897c · Cited by 26
Martin, P., Maquet, C., Legras, R., Bailly, C., Leemans, L., van Gurp, M., & van Duin, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.093 · Cited by 25
Effect of Tacticity on Chain Entanglement in Poly(methyl methacrylate)
Wu, S., & Beckerbauer, R. (1992) · Polymer Journal · doi:10.1295/polymj.24.1437 · Cited by 24
Mechanical Properties and Morphology of Polylactide Composites with Acrylic Impact Modifier
Ge, X., George, S., Law, S., & Sain, M. M. (2011) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2011.557585 · Cited by 24
Impact property enhancement of poly (lactic acid) with different flexible copolymers
Likittanaprasong, N., Seadan, M., & Suttiruengwong, S. (2015) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/87/1/012069 · Cited by 24
Wang, R., Wang, S., & Zhang, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30353 · Cited by 23
Structure and properties of polylactide toughened by polyurethane prepolymer
Zhang, X., Koranteng, E., Wu, Z., & Wu, Q. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42983 · Cited by 21
Synthesis of PDLLA homopolymers with different molecular weights
Xu, K., Kozluca, A., Denkbaş, E. B., & Pişkın, E. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960118)59:3<561::aid-app23>3.0.co;2-v · Cited by 21
Zhao, L., Su, J., Han, J., Zhang, B., & Lu, O. (2017) · RSC Advances · doi:10.1039/c6ra28843j · Cited by 20
Hao, Y., Ge, H., Han, L., Zhang, H., Dong, L., & Sun, S. (2013) · Chinese Journal of Polymer Science · doi:10.1007/s10118-013-1350-4 · Cited by 19
Role of Dicumyl Peroxide on Toughening PLLA via Dynamic Vulcanization
Liu, L., Hou, J., Wang, L., Zhang, J., & Duan, Y. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02122 · Cited by 19
Manipulation of multiphase morphology in the reactive blending system OBC/PLA/EGMA
Wu, M., Wang, K., Zhang, Q., & Fu, Q. (2015) · RSC Advances · doi:10.1039/c5ra12271f · Cited by 18
Chen, Q., Shan, P., Tong, C., Yan, D., Zhang, Y., Liu, H., & Hao, C. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47682 · Cited by 17
Biodegradable tough blends of poly( L -lactide) and poly(castor oil)–poly( L -lactide) copolymer
Huang, S., Sun, H. Y., Sun, J., Li, G., & Chen, X. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.06.133 · Cited by 15
Meekum, U., & Khiansanoi, A. (2018) · Results in Physics · doi:10.1016/j.rinp.2018.04.028 · Cited by 14
New poly(arylene ether sulfone)s based on 4,4′-[trans-1,4-cyclohexanediylbis(methylene)] bisphenol
Zhang, B., & Turner, S. R. (2013) · Polymer · doi:10.1016/j.polymer.2013.06.018 · Cited by 13
The application of miscibility parameter to the measurement of polymer-plasticizer compatibility
David, D. J., Rotstein, N. A., & SINCOCK, T. (1994) · Polymer Bulletin · doi:10.1007/bf00296088 · Cited by 11
Reactive blending toughened PLA by in situ formation of polyurethane crosslinked elastomer
Zhao, X., Xu, M., Ding, Z., Peng, S., & Fang, P. (2017) · Polymer Science Series B · doi:10.1134/s156009041704011x · Cited by 11
Self-citationZhao, X., Yu, X., Chen, H., Zhou, W., Fang, P., & Peng, S. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46596 · Cited by 11
Self-citationZhong, B., & Al‐Saigh, Z. Y. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34516 · Cited by 9
Mode I and II Fracture Behaviour of Rubber Modified Brittle Epoxies
Kim, H. S., & Ma, P. (1997) · Key engineering materials · doi:10.4028/www.scientific.net/kem.137.179 · Cited by 6
Properties of Poly(lactic acid) Toughened by Epoxy-functionalized Elastomer
Yl, F., Jh, Y., Jiang, W. J., & Gy, Z. (2012) · 高等学校化学学报 · Cited by 6
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Research works printed but not linked: 16
- L. T.Sin , A. R.Rahmat and W. A. W. A.Rahman , Polylactic Acid , William Andrew , 2012 , ch. 4, vol. 47 , pp. 1530–1542
- Yang, 2016, Sci. China: Chem., 59, 1355, 10.1007/s11426-016-0222-7 · DOI
- Lim, 2008, Prog. Polym. Sci., 33, 820, 10.1016/j.progpolymsci.2008.05.004 · DOI · Paper page
- Alias, 2019, Polym.-Plast. Technol. Mater., 58, 1
- Joziasse, 1994, Polym. Bull., 33, 599, 10.1007/BF00296170 · DOI
- Wang, 2009, Polym. Mater. Sci. Eng., 25, 45
- Xiao, 2011, Chem. Ind. Eng. Prog., 30, 578
- Liang, 1996, J. Appl. Polym. Sci., 59, 505, 10.1002/(SICI)1097-4628(19960118)59:3<505::AID-APP16>3.0.CO;2-S · doi:10.1002/(sici)1097-4628(19960118)59:3<505::aid-app16>3.0.co;2-s
- Feng, 2012, Chem. J. Chin. Univ., 33, 400
- Nie, 2015, China Synth. Resin Plast., 32, 59
- Liu, 2011, Macromolecules, 44, 1513, 10.1021/ma1026934 · DOI · Paper page
- Chen, 2015, Ind. Eng. Chem. Res., 54, 8723, 10.1021/acs.iecr.5b02195 · DOI
- Jiang, 2006, Biomacromolecules, 7, 199, 10.1021/bm050581q · DOI · Paper page
- Lin, 2012, Mater. Des., 36, 604, 10.1016/j.matdes.2011.11.036 · DOI · Paper page
- Urquijo, 2015, J. Appl. Polym. Sci., 132, 42641, 10.1002/app.42641 · DOI · Paper page
- Zaaba, 2019, Polym.-Plast. Technol. Mater., 1
Cited by
Tyagi, P., Salem, K. S., Hubbe, M. A., & Pal, L. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.036 · Cited by 387
Tripathi, N., Misra, M., & Mohanty, A. K. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00011 · Cited by 304
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Tailoring the Barrier Properties of PLA: A State-of-the-Art Review for Food Packaging Applications
Marano, S., Laudadio, E., Minnelli, C., & Stipa, P. (2022) · Polymers · doi:10.3390/polym14081626 · Cited by 213
Chen, J., Rong, C., Lin, T., Chen, Y., Wu, J., You, J., Wang, H., & Li, Y. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02861 · Cited by 210
Metadata
- Authors
- Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S.
- Affiliations
- Hubei Provincial Key Laboratory of Green Materials for Light Industry (CN)
- Corresponding author
- Zhao, Xipo
- Peng, Shaoxian
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2020
- Volume
- 10
- Issue
- 22
- Pages
- 13316-13368
- ISSN
- 2046-2069 (ISSN-L)
- PMC
- PMC9051451
- OpenAlex
- W3014340192
- Cited by
- 465
- References
- 260
- Citations by year
- 2026: 62 · 2025: 81 · 2024: 107 · 2023: 74 · 2022: 80 · 2021: 53 · 2020: 8
- FWCI
- 3.59
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- RSC Advances (publishedVersion, cc-by-nc)
- PubMed Central (publishedVersion, cc-by-nc)
- PubMed (publishedVersion)
- Funders
- National Natural Science Foundation of China (51273060)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, polymer blends, toughening, blend morphology, particle size, interparticle distance, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.