Super tough poly(lactic acid) blends: a comprehensive review
Open accessThe DOI matches its Crossref record; 261 of the 261 references it cites were found in a registry or an index.
Abstract
PLA is a renewable, bio-based, and biodegradable aliphatic thermoplastic polyester that is considered a promising alternative to petrochemical-derived polymers in a wide range of commodity and engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures















![Fig. 16 Notched impact strength of PLAs and PLA/EGMA blends [C: complete break, P: partial break]. Ref. 142, copyright 2009. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/570b6dcf3cb643b6843e73a4d3c3f745/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-16.jpg)








































![Fig. 57 TEM images of room-temperature notched surfaces of PLA-based materials containing 10 wt% of P[CL-co-LA] copolyester without silica nanoparticles (a), with 5 wt% (b and b′) and 10 wt% of silica nanoparticles (c and c′). Scale bar: 0.5 μm (a–c) and 100 nm (b'and c′). Ref. 260, copyright 2013. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/d3a74a25371d4ef0ba1d9bd1756379e9/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-57.jpg)


Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It has also been reported that in brittle polymers, when multiple crazing mechanism dominates, the size of the dispersed phase in the matrix is about 2–3 μm.8”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [8]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To overcome the brittleness of PLA, several strategies have been employed, such as copolymerization, 14 blending with softer (e.g.PCL) or rubber-like polymers, chemical modification, and the addition of additives.15,16”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [16]
The cited source says what the claim attributes to it.
In the citing paper
“PLA properties such as the Tg, melting temperature (Tm),5,8,9 crystallinity,10,11 hydrophilicity,12 and ductility13,14 are reported to be improved using this approach.”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Bio-nanocomposites for food packaging applications
Rhim, J.-W., Park, H.-M., & Ha, C.-S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.008 · Cited by 1,980
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Chandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,462
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Phase structure and adhesion in polymer blends: A criterion for rubber toughening
Wu, S. (1985) · Polymer · doi:10.1016/0032-3861(85)90015-1 · Cited by 1,426
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2006) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 954
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Strategies for compatibilization of polymer blends
Koning, C. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00054-3 · Cited by 881
Toughening mechanisms in elastomer-modified epoxies: Part 1 Mechanical studies
Yee, A. F., & Pearson, R. A. (1986) · Journal of Materials Science · doi:10.1007/bf01114293 · Cited by 857
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Poly(butylene succinate) and its copolymers: Research, development and industrialization
Xu, J., & Guo, B. (2010) · Biotechnology Journal · doi:10.1002/biot.201000136 · Cited by 778
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Properties and medical applications of polylactic acid: A review
Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.42 · Cited by 722
A review of crazing and fracture in thermoplastics
Kambour, R. P. (1973) · Journal of Polymer Science: Macromolecular Reviews · doi:10.1002/pol.1973.230070101 · Cited by 695
A generalized criterion for rubber toughening: The critical matrix ligament thickness
Wu, S. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070350220 · Cited by 693
Closed-loop recycling of plastics enabled by dynamic covalent diketoenamine bonds
Christensen, P. R., Scheuermann, A. M., Loeffler, K. E., & Helms, B. A. (2019) · Nature Chemistry · doi:10.1038/s41557-019-0249-2 · Cited by 676
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Plastics recycling with a difference
Sardon, H., & Dove, A. P. (2018) · Science · doi:10.1126/science.aat4997 · Cited by 512
Kumar, M., Mohanty, S., Nayak, S. K., & Rahail Parvaiz, M. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.075 · Cited by 459
The Case for Polylactic Acid as a Commodity Packaging Plastic
Sinclair, R. G. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608010880 · Cited by 453
Chain structure, phase morphology, and toughness relationships in polymers and blends
Wu, S. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760301302 · Cited by 453
Structure and properties for biomass-based polyester blends of PLA and PBS
Yokohara, T., & Yamaguchi, M. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.01.008 · Cited by 439
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Wang, X., Peng, S., Chen, H., Yu, X., & Zhao, X. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107028 · Cited by 393
Self-citationPolylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review
Su, S., Kopitzky, R., Tolga, S., & Kabasci, S. (2019) · Polymers · doi:10.3390/polym11071193 · Cited by 380
Shibata, M., Inoue, Y., & Miyoshi, M. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.065 · Cited by 375
Encyclopedic Dictionary of Polymers
(2011) · Springer eBooks · doi:10.1007/978-1-4419-6247-8 · Cited by 373
Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane Elastomer
Li, Y., & Shimizu, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700027 · Cited by 371
Toughening of polylactide by melt blending with linear low‐density polyethylene
Anderson, K. S., Lim, S. H., & Hillmyer, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12462 · Cited by 362
Liu, H., Chen, F., Liu, B., Estep, G., & Zhang, J. (2010) · Macromolecules · doi:10.1021/ma101108g · Cited by 323
Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 317
Polylactic acid (PLA) synthesis and modifications: a review
Cheng, Y., Deng, S., Chen, P., & Ruan, R. (2009) · Frontiers of Chemistry in China · doi:10.1007/s11458-009-0092-x · Cited by 314
Anderson, K. S., & Hillmyer, M. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.047 · Cited by 300
Compatibilization strategies in poly(lactic acid)-based blends
Zeng, J.-B., Li, K.-A., & Du, A.-K. (2015) · RSC Advances · doi:10.1039/c5ra01655j · Cited by 290
Recent advances in stereocomplexation of enantiomeric PLA-based copolymers and applications
Li, Z., Tan, B. H., Lin, T., & He, C. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.05.003 · Cited by 285
Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions
Schindler, A., & Harper, D. (1979) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1979.170170831 · Cited by 278
Structure and properties of polylactide/natural rubber blends
Bitinis, N., Verdejo, R., Cassagnau, P., & Lopez-Manchado, M. A. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.016 · Cited by 274
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Toughening modification of PLLA/PBS blends via in situ compatibilization
Wang, R., Wang, S., Zhang, Y., Wan, C., & Ma, P. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21210 · Cited by 266
Yang, W., Fortunati, E., Dominici, F., Giovanale, G., Mazzaglia, A., Balestra, G. M., Kenny, J. M., & Puglia, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.04.003 · Cited by 263
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Structure-properties of super-tough PLA alloy with excellent heat resistance
Hashima, K., Nishitsuji, S., & Inoue, T. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.045 · Cited by 256
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B. (2017) · Polymer Reviews · doi:10.1080/15583724.2017.1287726 · Cited by 255
Harada, M., Ohya, T., Iida, K., Hayashi, H., Hirano, K., & Fukuda, H. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26717 · Cited by 254
Ma, P., Cai, X., Zhang, Y., Wang, S., Dong, W., Chen, M., & Lemstra, P. J. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.025 · Cited by 252
Tailoring crystallization: towards high-performance poly(lactic acid)
Liu, G., Zhang, X., & Wang, D. (2014) · Advanced Materials · doi:10.1002/adma.201305413 · Cited by 249
Biodegradation in Soil of PLA/PBAT Blends Compatibilized with Chain Extender
Palsikowski, P. A., Kuchnier, C. N., Pinheiro, I. F., & Morales, A. R. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0951-3 · Cited by 247
Ojijo, V., Sinha Ray, S., & Sadiku, R. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400482f · Cited by 245
Surprising shape-memory effect of polylactide resulted from toughening by polyamide elastomer
Zhang, W., Chen, L., & Zhang, Y. (2009) · Polymer · doi:10.1016/j.polymer.2009.01.032 · Cited by 245
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.06.013 · Cited by 244
A new approach in compatibilization of the poly(lactic acid)/thermoplastic starch (PLA/TPS) blends
Akrami, M., Ghasemi, I., Azizi, H., Karrabi, M., & Seyedabadi, M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.035 · Cited by 242
Zhang, N., Wang, Q., Ren, J., & Wang, L. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3049-4 · Cited by 240
Rheological, morphological, and interfacial properties of compatibilized PLA/PBAT blends
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2014) · Rheologica Acta · doi:10.1007/s00397-014-0774-2 · Cited by 240
Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review
Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238
Handbook of Plastics Testing Technology
Shah, V. (1984) · Medical Entomology and Zoology · Cited by 235
Chen, Y., Yuan, D., & Xu, C. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5004766 · Cited by 233
Role of particle cavitation in rubber-toughened epoxies: 1. Microvoid toughening
Bagheri, R., & Pearson, R. A. (1996) · Polymer · doi:10.1016/0032-3861(96)00295-9 · Cited by 227
Ma, P., Hristova-Bogaerds, D. G., Goossens, J. G. P., Spoelstra, A. B., Zhang, Y., & Lemstra, P. J. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.015 · Cited by 223
Xiong, Z., Yang, Y., Feng, J., Zhang, X., Zhang, C., Tang, Z., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.09.007 · Cited by 222
State of the art and future prospectives of poly(lactic acid) based blends and composites
Sangeetha, V. H., Deka, H., Varghese, T. O., & Nayak, S. K. (2018) · Polymer Composites · doi:10.1002/pc.23906 · Cited by 216
Melt Rheology of High l-Content Poly(lactic acid)
Palade, L.-I., Lehermeier, H. J., & Dorgan, J. R. (2001) · Macromolecules · doi:10.1021/ma001173b · Cited by 209
Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends
Feng, F., & Ye, L. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.32863 · Cited by 207
Liu, G.-C., He, Y.-S., Zeng, J.-B., Li, Q.-T., & Wang, Y.-Z. (2014) · Biomacromolecules · doi:10.1021/bm5012739 · Cited by 205
Su, Z., Li, Q., Liu, Y., Hu, G.-H., & Wu, C. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.04.028 · Cited by 203
Wu, S. (1992) · Polymer International · doi:10.1002/pi.4990290313 · Cited by 196
Wang, X., Hu, Y., Song, L., Xuan, S., Xing, W., Bai, Z., & Lu, H. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1017157 · Cited by 194
Self-citationHo, C.-H., Wang, C.-H., Lin, C.-I., & Lee, Y.-D. (2008) · Polymer · doi:10.1016/j.polymer.2008.06.054 · Cited by 190
Ding, Y., Lu, B., Wang, P., Wang, G., & Ji, J. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.11.012 · Cited by 188
Zhao, T.-H., Yuan, W.-Q., Li, Y.-D., Weng, Y.-X., & Zeng, J.-B. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00103 · Cited by 186
Studies on heterogeneous polymeric systems
Merz, E. H., Claver, G. C., & Baer, M. (1956) · Journal of Polymer Science · doi:10.1002/pol.1956.1202210114 · Cited by 185
Ojijo, V., & Ray, S. S. (2015) · Polymer · doi:10.1016/j.polymer.2015.10.038 · Cited by 179
Toughening of poly(L‐lactide) by melt blending with rubbers
Ishida, S., Nagasaki, R., Chino, K., Dong, T., & Inoue, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30134 · Cited by 177
Urquijo, J., Guerrica‐Echevarría, G., & Eguiazábal, J. I. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42641 · Cited by 176
Stoclet, G., Seguela, R., & Lefebvre, J.-M. (2011) · Polymer · doi:10.1016/j.polymer.2011.02.002 · Cited by 165
Liu, Z., Luo, Y., Bai, H., Zhang, Q., & Fu, Q. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00816 · Cited by 165
Lin, S., Guo, W., Chen, C., Ma, J., & Wang, B. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.11.036 · Cited by 164
Mechanical properties and phase morphology of super-tough PLA/PBAT/EMA-GMA multicomponent blends
Wu, N., & Zhang, H. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.01.063 · Cited by 164
Harada, M., Iida, K., Okamoto, K., Hayashi, H., & Hirano, K. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21088 · Cited by 163
Filling of poly(lactic acid) with native starch
Jacobsen, S., & Fritz, H. G. (1996) · Polymer Engineering & Science · doi:10.1002/pen.10680 · Cited by 162
Compatibilization and morphology development of immiscible ternary polymer blends
Wang, D., Li, Y., Xie, X., & Guo, B. (2010) · Polymer · doi:10.1016/j.polymer.2010.11.019 · Cited by 161
Fang, H., Jiang, F., Wu, Q., Ding, Y., & Wang, Z. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502735q · Cited by 161
Meng, B., Deng, J., Liu, Q., Wu, Z., & Yang, W. M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.009 · Cited by 160
Dong, W., Zou, B., Yan, Y., Ma, P., & Chen, M. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms141020189 · Cited by 158
Han, J., & Huang, H. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33338 · Cited by 156
Bai, H., Huang, C., Xiu, H., Gao, Y., Zhang, Q., & Fu, Q. (2013) · Polymer · doi:10.1016/j.polymer.2013.07.051 · Cited by 153
In situ formed crosslinked polyurethane toughened polylactide
Liu, G., He, Y., Zeng, J., Xu, Y., & Wang, Y. (2013) · Polymer Chemistry · doi:10.1039/c3py01649h · Cited by 149
Wang, Y., Chen, K., Xu, C., & Chen, Y. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b06244 · Cited by 147
Xiu, H., Huang, C., Bai, H., Jiang, J., Chen, F., Deng, H., Wang, K., Zhang, Q., & Fu, Q. (2014) · Polymer · doi:10.1016/j.polymer.2014.01.057 · Cited by 144
Zhang, X., & Zhang, Y. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.073 · Cited by 144
Bitinis, N., Verdejo, R., Maya, E. M., Espuche, É., Cassagnau, P., & López-Manchado, M. Á. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.11.018 · Cited by 139
Yoon, W. J., Hwang, S. Y., Koo, J. M., Lee, Y., Lee, S. U., & Im, S. S. (2013) · Macromolecules · doi:10.1021/ma4015092 · Cited by 138
Brittleness and toughness of polymers and other materials
Brostow, W., Lobland, H. E. H., & Khoja, S. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.07.047 · Cited by 137
Research progress in the heat resistance, toughening and filling modification of PLA
Yang, Y., Zhang, L., Xiong, Z., Tang, Z., Zhang, R., & Zhu, J. (2016) · Science China Chemistry · doi:10.1007/s11426-016-0222-7 · Cited by 137
Zhou, S., Huang, H., Ji, X., Yan, D., Zhong, G., Hsiao, B. S., & Li, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00451 · Cited by 135
Li, K., Peng, J., Turng, L., & Huang, H. (2011) · Advances in Polymer Technology · doi:10.1002/adv.20212 · Cited by 132
Juntuek, P., Ruksakulpiwat, Y., Chumsamrong, P., & Ruksakulpiwat, Y. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.36263 · Cited by 128
Jariyasakoolroj, P., Tashiro, K., Wang, H., Yamamoto, H., Chinsirikul, W., Kerddonfag, N., & Chirachanchai, S. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.006 · Cited by 125
Super-tough Poly(lactide) Thermoplastic Vulcanizates Based on Modified Natural Rubber
Wu, N., Zhang, H., & Fu, G. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02197 · Cited by 121
Maroufkhani, M., Katbab, A. A., Liu, W., & Zhang, J. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.025 · Cited by 120
Tough Polylactide Graft Copolymers
Theryo, G., Jing, F., Pitet, L. M., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma101155p · Cited by 119
Predicting chain conformation and entanglement of polymers from chemical structure
Wu, S. (1992) · Polymer Engineering and Science · doi:10.1002/pen.760321209 · Cited by 119
Strong synergistic effects in PLA/PCL blends: impact of PLA matrix viscosity
Ostafinska, A., Fortelný, I., Hodan, J., Krejčíková, S., Nevoralová, M., Kredatusová, J., Kruliš, Z., Kotek, J., & Šlouf, M. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.015 · Cited by 118
Interactions, structure and properties in poly(lactic acid)/thermoplastic polymer blends
Imre, B., Renner, K. E., & Pukánszky, B. (2013) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2014.2 · Cited by 117
Study of rubber‐modified brittle epoxy systems. Part II: Toughening mechanisms under mode‐I fracture
Sue, H. (1991) · Polymer Engineering and Science · doi:10.1002/pen.760310411 · Cited by 113
Nuzzo, A., Bilotti, E., Peijs, T., Acierno, D., & Filippone, G. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.036 · Cited by 113
Lin, L., Deng, C., Lin, G., & Wang, Y. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b01177 · Cited by 110
Deng, L., Xu, C., Wang, X., & Wang, Z. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02751 · Cited by 110
Self-citationXiu, H., Bai, H., Huang, C., Xu, C. L., Li, X. Y., & Fu, Q. (2013) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2013.24 · Cited by 109
Li, X., Kang, H., Shen, J., Zhang, L., Nishi, T., Ito, K., Zhao, C., & Coates, P. D. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.045 · Cited by 108
Dong, W., He, M., Wang, H., Ren, F., Zhang, J., Zhao, X., & Li, Y. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00740 · Cited by 108
Self-citationPolymer alloys and blends: Recent advances
Favis, B. D. (1991) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450690303 · Cited by 107
Toughened blends of poly(butylene terephthalate) and BPA polycarbonate
Hobbs, S. Y., Dekkers, M. E. J., & Watkins, V. H. (1988) · Journal of Materials Science · doi:10.1007/bf01154581 · Cited by 105
Shibata, M., Teramoto, N., & Inoue, Y. (2007) · Polymer · doi:10.1016/j.polymer.2007.02.065 · Cited by 104
Highly recoverable rosin-based shape memory polyurethanes
Zhang, L., Jiang, Y., Xiong, Z., Liu, X., Na, H., Zhang, R., & Zhu, J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta01655b · Cited by 104
Ma, P., Spoelstra, A. B., Schmit, P., & Lemstra, P. J. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.016 · Cited by 104
Yang, X., Clénet, J., Xu, H., Odelius, K., & Hakkarainen, M. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00235 · Cited by 102
Super-tough poly( l -lactide)/crosslinked polyurethane blends with tunable impact toughness
He, Y., Zeng, J., Liu, G.-C., Li, Q.-T., & Wang, Y. (2014) · RSC Advances · doi:10.1039/c4ra00718b · Cited by 100
Silane modified starch for compatible reactive blend with poly(lactic acid)
Jariyasakoolroj, P., & Chirachanchai, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.018 · Cited by 97
Employing a novel bioelastomer to toughen polylactide
Kang, H., Qiao, B., Wang, R., Wang, Z., Zhang, L., Ma, J., & Coates, P. D. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.053 · Cited by 96
Zhang, N., Zeng, C., Wang, L., & Ren, J. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0448-z · Cited by 94
Martin, P., Devaux, J., Legras, R., van Gurp, M., & van Duin, M. (2001) · Polymer · doi:10.1016/s0032-3861(00)00496-1 · Cited by 94
Polylactide toughening with epoxy‐functionalized grafted acrylonitrile–butadiene–styrene particles
Sun, S., Zhang, M., Zhang, H., & Zhang, X. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34111 · Cited by 94
Ji, D., Liu, Z., Lan, X., Wu, F., Xie, B., & Yang, M. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39580 · Cited by 93
High impact poly(lactic acid)/poly(ethylene octene) blends prepared by reactive blending
Feng, Y., Hu, Y., Yin, J., Zhao, G., & Jiang, W. J. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23265 · Cited by 92
Reactive Compatibilization of PLA/PA11 Blends and Their Application in Additive Manufacturing
Rasselet, D., Caro‐Bretelle, A. S., Taguet, A., & Lopez‐Cuesta, J. (2019) · Materials · doi:10.3390/ma12030485 · Cited by 92
Yuan, D., Xu, C., Chen, Z., & Chen, Y. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.07.004 · Cited by 91
The entanglement network and craze micromechanics in glassy polymers
Donald, A. M., Krämer, E. J., & Bubeck, R. A. (1982) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1982.180200703 · Cited by 91
Lu, X. H., Wei, X., Huang, J., Li, Y., Zhang, G., He, G., Wang, M., & Qu, J. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503092w · Cited by 91
Substituted Polyacetylenes: Synthesis, Properties, and Functions
Masuda, T. (2016) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2016.1170701 · Cited by 91
Dompas, D., Groeninckx, G., Isogawa, M., Hasegawa, T., & Kadokura, M. (1994) · Polymer · doi:10.1016/0032-3861(94)90728-5 · Cited by 90
Ma, P., Xu, P., Zhai, Y., Dong, W., Zhang, Y., & Chen, M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00462 · Cited by 90
Chen, Y., Chen, K., Wang, Y., & Xu, C. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02195 · Cited by 87
Odent, J., Leclère, P., Raquez, J.-M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.006 · Cited by 86
Sun, Z., Zhang, B., Bian, X., Feng, L., Zhang, H., Duan, R., Sun, J., Pang, X., Chen, W., & Chen, X. (2015) · RSC Advances · doi:10.1039/c5ra11019j · Cited by 83
Yuan, D., Chen, K., Xu, C., Chen, Z., & Chen, Y. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.07.044 · Cited by 82
Liu, Z., Hu, D., Huang, L., Li, W., Tian, J., Lu, L., & Zhou, C. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.077 · Cited by 81
Reactive compatibilization of PLA/TPU blends with a diisocyanate
Kemaloglu, S., Reyes, E. A., Rastogi, S., & Özkoç, G. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40251 · Cited by 80
Zhao, Q., Ding, Y. M., Yang, B., Ning, N., & Fu, Q. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.11.012 · Cited by 79
Toughening of polylactide by melt blending with methyl methacrylate–butadiene–styrene copolymer
Zhang, H., Liu, N., Ran, X., Han, C., Han, L., Zhuang, Y., & Dong, L. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36952 · Cited by 78
Zaaba, N. F., & Ismail, H. (2019) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2019.1599941 · Cited by 78
Effects of compatibilizers on the mechanical properties of ABS/PLA composites
Jo, M. Y., Ryu, Y. J., Ko, J. H., & Yoon, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36732 · Cited by 77
PLLA Microalloys Versus PLLA Nanoalloys: Preparation, Morphologies, and Properties
Dong, W., Jiang, F., Zhao, L., You, J., Cao, X., & Li, Y. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3007577 · Cited by 77
Toughened blends of poly(butylene terephthalate) and BPA polycarbonate
Dekkers, M. E. J., Hobbs, S. Y., & Watkins, V. H. (1988) · Journal of Materials Science · doi:10.1007/bf01154582 · Cited by 72
Imre, B., Bedő, D., Domján, A., Schön, P. M., Vancso, G. J., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.007 · Cited by 71
Fortunati, E., Puglia, D., Iannoni, A., Terenzi, A., Kenny, J. M., & Torre, L. (2017) · Materials · doi:10.3390/ma10070809 · Cited by 71
Lebarbé, T., Grau, É., Gadenne, B., Alfos, C., & Cramail, H. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500648g · Cited by 70
Lin, W., & Qu, J. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b01644 · Cited by 70
Odent, J., Habibi, Y., Raquez, J., & Dúbois, P. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.05.003 · Cited by 68
Super toughening of the poly(l-lactide)/thermoplastic polyurethane blends by carbon nanotubes
Shi, Y., Zhang, W., Yang, J., Huang, T. K., Zhang, N., Wang, Y., Yuan, G., & Zhang, C. (2013) · RSC Advances · doi:10.1039/c3ra43253j · Cited by 67
Preparation and characterization of polylactide/thermoplastic konjac glucomannan blends
Changgang, X., Luo, X., Lin, X., Zhuo, X., & Liang, L. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.007 · Cited by 66
Tanrattanakul, V., & Bunkaew, P. (2014) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2014.43 · Cited by 66
Accelerating Reactive Compatibilization of PE/PLA Blends by an Interfacially Localized Catalyst
Thurber, C. M., Xu, Y., Myers, J. C., Lodge, T. P., & Macosko, C. W. (2014) · ACS Macro Letters · doi:10.1021/mz500770y · Cited by 66
Wu, M., Wu, Z., Wang, K., Zhang, Q., & Fu, Q. (2014) · Polymer · doi:10.1016/j.polymer.2014.10.004 · Cited by 64
Dynamic vulcanization of castor oil in a polylactide matrix for toughening
Zhao, T., He, Y., Li, Y., Wang, M., & Zeng, J. (2016) · RSC Advances · doi:10.1039/c6ra13631a · Cited by 64
An overview of toughening polylactic acid by an elastomer
Alias, N. F., & Ismail, H. (2019) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2018.1563118 · Cited by 64
Droplet Breakup and Shear-Induced Mixing in Critical Polymer Blends
Kim, S., Hobbie, E. K., Yu, J.-W., & Han, C. C.-C. (1997) · Macromolecules · doi:10.1021/ma9707648 · Cited by 63
Rathi, S. R., Coughlin, E. B., Hsu, S. L., Golub, C. S., Ling, G. H., & Tzivanis, M. J. (2012) · Polymer · doi:10.1016/j.polymer.2012.05.005 · Cited by 63
Effects of reactive blending temperature on impact toughness of poly(lactic acid) ternary blends
Liu, H., Guo, L. Q., Guo, X., & Zhang, J. (2011) · Polymer · doi:10.1016/j.polymer.2011.12.036 · Cited by 62
Yu, X., Wang, X., Zhang, Z., Peng, S., Chen, H., & Zhao, X. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105980 · Cited by 62
Self-citationRigoussen, A., Verge, P., Raquez, J., Habibi, Y., & Dúbois, P. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.004 · Cited by 61
Chen, H., Yu, X., Zhou, W., Peng, S., & Zhao, X. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.07.023 · Cited by 61
Self-citationMorphology and properties of the biosourced poly(lactic acid)/poly(ethylene oxide‐b‐amide‐12) blends
Han, L., Han, C., & Dong, L. (2012) · Polymer Composites · doi:10.1002/pc.22383 · Cited by 60
Ma, P., Xu, P., Liu, W., Zhai, Y., Dong, W., Zhang, Y., & Chen, M. (2015) · RSC Advances · doi:10.1039/c4ra14194f · Cited by 60
Heshmati, V., Zolali, A. M., & Favis, B. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.05.056 · Cited by 60
Dong, W., Zou, B., Ma, P., Liu, W., Zhou, X., Shi, D., Ni, Z., & Chen, M. (2013) · Polymer International · doi:10.1002/pi.4568 · Cited by 59
Karger-Kocsis, J., Gryshchuk, O., & Jost, N. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11946 · Cited by 59
Bitinis, N., Sanz, A., Nogales, A., Verdejo, R., López-Manchado, M. Á., & Ezquerra, T. A. (2012) · Soft Matter · doi:10.1039/c2sm25729g · Cited by 59
Improvement in toughness of polylactide by melt blending with bio-based poly(ester)urethane
Yu, R., Zhang, L.-S., Feng, Y., Zhang, R., & Zhu, J. (2014) · Chinese Journal of Polymer Science · doi:10.1007/s10118-014-1487-9 · Cited by 59
Li, S., & Woo, E. M. (2008) · Polymer International · doi:10.1002/pi.2469 · Cited by 56
High‐performance biosourced poly(lactic acid)/polyamide 11 blends with controlled salami structure
Dong, W., Cao, X., & Li, Y. (2013) · Polymer International · doi:10.1002/pi.4618 · Cited by 54
Song, W., Liu, H., Chen, F., & Zhang, J. (2012) · Polymer · doi:10.1016/j.polymer.2012.03.050 · Cited by 52
Thermal, mechanical, and rheological properties of polylactide/poly(1,2‐propylene glycol adipate)
Zhang, H., Fang, J., Ge, H., Han, L., Wang, X., Hao, Y., Han, C., & Dong, L. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23238 · Cited by 51
Self-citationZaman, H. U., Song, J. C., Park, L.-S., Kang, I., Park, S., Kwak, G., Park, B., & Yoon, K. (2011) · Polymer Bulletin · doi:10.1007/s00289-011-0448-5 · Cited by 50
Asgari, M. S., & Masoomi, M. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.11.035 · Cited by 49
Tunable and Durable Toughening of Polylactide Materials Via Reactive Extrusion
Kfoury, G., Hassouna, F., Raquez, J., Toniazzo, V., Ruch, D., & Dúbois, P. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300265 · Cited by 48
Enhanced ductility of polylactide materials: Reactive blending with pre-hot sheared natural rubber
Zhang, C., Huang, Y., Luo, C., Jiang, L., & Dan, Y. (2013) · Journal of Polymer Research · doi:10.1007/s10965-013-0121-9 · Cited by 48
Nagarajan, V., Mohanty, A. K., & Misra, M. (2017) · Polymer Engineering and Science · doi:10.1002/pen.24566 · Cited by 48
Ethylene‐methyl acrylate‐glycidyl methacrylate toughened poly(lactic acid) nanocomposites
Baouz, T., Rezgui, F., & Yilmazer, Ü. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38529 · Cited by 47
Feng, Y., Zhao, G., Yin, J., & Jiang, W. J. (2013) · Polymer International · doi:10.1002/pi.4632 · Cited by 46
A New Approach to Supertough Poly(lactic acid): A High Temperature Reactive Blending
Yuryev, Y., Mohanty, A. K., & Misra, M. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600242 · Cited by 46
Liang, H., Hao, Y., Bian, J., Zhang, H., Dong, L., & Zhang, H. (2014) · Polymer Engineering and Science · doi:10.1002/pen.23893 · Cited by 45
Joziasse, C. A. P., Topp, M. D. C., Veenstra, H., Grijpma, D. W., & Pennings, A. J. (1994) · Polymer Bulletin · doi:10.1007/bf00296170 · Cited by 44
Kfoury, G., Raquez, J., Hassouna, F., Leclère, P. E. L. G., Toniazzo, V., Ruch, D., & Dúbois, P. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24085 · Cited by 44
Hu, X., Li, Y., Li, M., Kang, H., & Zhang, L. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02159 · Cited by 44
Toughening of polylactide with epoxy‐functionalized methyl methacrylate–butadiene copolymer
Hao, Y., Liang, H., Bian, J., Sun, S., Zhang, H., & Dong, L. (2013) · Polymer International · doi:10.1002/pi.4561 · Cited by 43
Toughening polylactide by dynamic vulcanization with castor oil and different types of diisocyanates
He, Y., Zhao, T., Li, Y., Wang, M., & Zeng, J. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.03.009 · Cited by 43
Zhang, L., Shams, S., Wei, Y., Liu, X., Ma, S., Zhang, R., & Zhu, J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05126b · Cited by 41
Zhang, X., Li, Y., Han, L., Han, C., Xu, K., Zhou, C., Zhang, M., & Dong, L. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23507 · Cited by 41
Research works printed but not linked: 16
- L. T.Sin , A. R.Rahmat and W. A. W. A.Rahman , Polylactic Acid , William Andrew , 2012 , ch. 4, vol. 47 , pp. 1530–1542
- Yang, 2016, Sci. China: Chem., 59, 1355, 10.1007/s11426-016-0222-7 · DOI
- Lim, 2008, Prog. Polym. Sci., 33, 820, 10.1016/j.progpolymsci.2008.05.004 · DOI · Paper page
- Alias, 2019, Polym.-Plast. Technol. Mater., 58, 1
- Joziasse, 1994, Polym. Bull., 33, 599, 10.1007/BF00296170 · DOI
- Wang, 2009, Polym. Mater. Sci. Eng., 25, 45
- Xiao, 2011, Chem. Ind. Eng. Prog., 30, 578
- Liang, 1996, J. Appl. Polym. Sci., 59, 505, 10.1002/(SICI)1097-4628(19960118)59:3<505::AID-APP16>3.0.CO;2-S · doi:10.1002/(sici)1097-4628(19960118)59:3<505::aid-app16>3.0.co;2-s
- Feng, 2012, Chem. J. Chin. Univ., 33, 400
- Nie, 2015, China Synth. Resin Plast., 32, 59
- Liu, 2011, Macromolecules, 44, 1513, 10.1021/ma1026934 · DOI · Paper page
- Chen, 2015, Ind. Eng. Chem. Res., 54, 8723, 10.1021/acs.iecr.5b02195 · DOI
- Jiang, 2006, Biomacromolecules, 7, 199, 10.1021/bm050581q · DOI · Paper page
- Lin, 2012, Mater. Des., 36, 604, 10.1016/j.matdes.2011.11.036 · DOI · Paper page
- Urquijo, 2015, J. Appl. Polym. Sci., 132, 42641, 10.1002/app.42641 · DOI · Paper page
- Zaaba, 2019, Polym.-Plast. Technol. Mater., 1
Cited by
Tyagi, P., Salem, K. S., Hubbe, M. A., & Pal, L. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.036 · Cited by 387
Tripathi, N., Misra, M., & Mohanty, A. K. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00011 · Cited by 304
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Tailoring the Barrier Properties of PLA: A State-of-the-Art Review for Food Packaging Applications
Marano, S., Laudadio, E., Minnelli, C., & Stipa, P. (2022) · Polymers · doi:10.3390/polym14081626 · Cited by 213
Chen, J., Rong, C., Lin, T., Chen, Y., Wu, J., You, J., Wang, H., & Li, Y. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02861 · Cited by 210
Metadata
- Authors
- Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S.
- Affiliations
- Hubei Provincial Key Laboratory of Green Materials for Light Industry (CN)
- Corresponding author
- Zhao, Xipo
- Peng, Shaoxian
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2020
- Volume
- 10
- Issue
- 22
- Pages
- 13316-13368
- ISSN
- 2046-2069 (ISSN-L)
- PMC
- PMC9051451
- OpenAlex
- W3014340192
- Cited by
- 465
- References
- 260
- Citations by year
- 2026: 62 · 2025: 81 · 2024: 107 · 2023: 74 · 2022: 80 · 2021: 53 · 2020: 8
- FWCI
- 3.59
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- RSC Advances (publishedVersion, cc-by-nc)
- PubMed Central (publishedVersion, cc-by-nc)
- PubMed (publishedVersion)
- Funders
- National Natural Science Foundation of China (51273060)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, polymer blends, toughening, blend morphology, particle size, interparticle distance, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.