Super tough poly(lactic acid) blends: a comprehensive review
Open accessThe DOI matches its Crossref record; 261 of the 261 references it cites were found in a registry or an index.
Abstract
PLA is a renewable, bio-based, and biodegradable aliphatic thermoplastic polyester that is considered a promising alternative to petrochemical-derived polymers in a wide range of commodity and engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures















![Fig. 16 Notched impact strength of PLAs and PLA/EGMA blends [C: complete break, P: partial break]. Ref. 142, copyright 2009. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/570b6dcf3cb643b6843e73a4d3c3f745/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-16.jpg)








































![Fig. 57 TEM images of room-temperature notched surfaces of PLA-based materials containing 10 wt% of P[CL-co-LA] copolyester without silica nanoparticles (a), with 5 wt% (b and b′) and 10 wt% of silica nanoparticles (c and c′). Scale bar: 0.5 μm (a–c) and 100 nm (b'and c′). Ref. 260, copyright 2013. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/d3a74a25371d4ef0ba1d9bd1756379e9/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-57.jpg)


Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It has also been reported that in brittle polymers, when multiple crazing mechanism dominates, the size of the dispersed phase in the matrix is about 2–3 μm.8”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [8]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To overcome the brittleness of PLA, several strategies have been employed, such as copolymerization, 14 blending with softer (e.g.PCL) or rubber-like polymers, chemical modification, and the addition of additives.15,16”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [16]
The cited source says what the claim attributes to it.
In the citing paper
“PLA properties such as the Tg, melting temperature (Tm),5,8,9 crystallinity,10,11 hydrophilicity,12 and ductility13,14 are reported to be improved using this approach.”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Bio-nanocomposites for food packaging applications
Rhim, J.-W., Park, H.-M., & Ha, C.-S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.008 · Cited by 1,980
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Research works printed but not linked: 16
- L. T.Sin , A. R.Rahmat and W. A. W. A.Rahman , Polylactic Acid , William Andrew , 2012 , ch. 4, vol. 47 , pp. 1530–1542
- Yang, 2016, Sci. China: Chem., 59, 1355, 10.1007/s11426-016-0222-7 · DOI
- Lim, 2008, Prog. Polym. Sci., 33, 820, 10.1016/j.progpolymsci.2008.05.004 · DOI · Paper page
- Alias, 2019, Polym.-Plast. Technol. Mater., 58, 1
- Joziasse, 1994, Polym. Bull., 33, 599, 10.1007/BF00296170 · DOI
- Wang, 2009, Polym. Mater. Sci. Eng., 25, 45
- Xiao, 2011, Chem. Ind. Eng. Prog., 30, 578
- Liang, 1996, J. Appl. Polym. Sci., 59, 505, 10.1002/(SICI)1097-4628(19960118)59:3<505::AID-APP16>3.0.CO;2-S · doi:10.1002/(sici)1097-4628(19960118)59:3<505::aid-app16>3.0.co;2-s
- Feng, 2012, Chem. J. Chin. Univ., 33, 400
- Nie, 2015, China Synth. Resin Plast., 32, 59
- Liu, 2011, Macromolecules, 44, 1513, 10.1021/ma1026934 · DOI · Paper page
- Chen, 2015, Ind. Eng. Chem. Res., 54, 8723, 10.1021/acs.iecr.5b02195 · DOI
- Jiang, 2006, Biomacromolecules, 7, 199, 10.1021/bm050581q · DOI · Paper page
- Lin, 2012, Mater. Des., 36, 604, 10.1016/j.matdes.2011.11.036 · DOI · Paper page
- Urquijo, 2015, J. Appl. Polym. Sci., 132, 42641, 10.1002/app.42641 · DOI · Paper page
- Zaaba, 2019, Polym.-Plast. Technol. Mater., 1
Cited by
Tyagi, P., Salem, K. S., Hubbe, M. A., & Pal, L. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.036 · Cited by 387
Tripathi, N., Misra, M., & Mohanty, A. K. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00011 · Cited by 304
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Tailoring the Barrier Properties of PLA: A State-of-the-Art Review for Food Packaging Applications
Marano, S., Laudadio, E., Minnelli, C., & Stipa, P. (2022) · Polymers · doi:10.3390/polym14081626 · Cited by 213
Chen, J., Rong, C., Lin, T., Chen, Y., Wu, J., You, J., Wang, H., & Li, Y. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02861 · Cited by 210
Biodegradable Polymer-Based Drug-Delivery Systems for Ocular Diseases
Tsung, T., Tsai, Y.-C., Lee, H.-P., Chen, Y., & Lu, D. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms241612976 · Cited by 166
“Alternatively, blending PLA with other biodegradable polymers could present an effective strategy to enhance its properties or create novel PLA polymers or blends for specific applications [87,88].”
BackgroundYousefi, M. A., Rahmatabadi, D., Baniassadi, M., Bodaghi, M., & Baghani, M. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400661 · Cited by 154
Cai, K., Liu, X., Ma, X., Zhang, J., Tu, S., & Feng, J. (2023) · Polymer · doi:10.1016/j.polymer.2023.126587 · Cited by 121
Recent Approaches to the Plasticization of Poly(lactic Acid) (PLA) (A Review)
Mastalygina, E. E., & Aleksanyan, K. V. (2023) · Polymers · doi:10.3390/polym16010087 · Cited by 110
Lignin-containing biodegradable UV-blocking films: a review
Wang, D., Gu, Y., Feng, S., Yang, W., Dai, H., Xiao, H., & Han, J. (2023) · Green Chemistry · doi:10.1039/d3gc02908e · Cited by 102
Yang, W., Zhou, Q., Pan, W., Zhu, S., Wei, C., Lu, H., Yang, W., & Yuen, A. C. Y. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143935 · Cited by 95
Polylactic acid in the fabrication of separation membranes: A review
Vatanpour, V., Dehqan, A., Paziresh, S., Zinadini, S., Zinatizadeh, A. A., & Koyuncu, İ. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121433 · Cited by 100
Musa, L., Nitiyah, K. K., Rahim, S. Z. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Kanani, A. Y., & Azmi, A. A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.08.057 · Cited by 100
“As written by Zhao et al. [130], tough-ening effect and improvement in mechanical properties of PLA blend system depend on the size of rubber particles.”
BackgroundMethodInfluentialAndrzejewski, J., Das, S., Lipik, V. T., Mohanty, A. K., Misra, M., You, X., Tan, L. P., & Chang, B. P. (2024) · Materials · doi:10.3390/ma17184556 · Cited by 86
“…the selective dispersion e ff ect and manipulating the compatibility and phase structure of blends with the presence of nanoparticles in the system [36]. dependent on the size and dispersion of the elastomer phase, and the strength of the polymer/elastomer interface Blending PLA with elastomers or…”
BackgroundInfluentialPoly(lactic acid)-Based Blends: A Comprehensive Review
ВАЙШБЕЙН, Л. И., Mastalygina, E. E., Olkhov, A. A., & Podzorova, M. V. (2023) · Applied Sciences · doi:10.3390/app13085148 · Cited by 82
Shahdan, D., Rosli, N. A., Chen, S., Ahmad, S., & Gan, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126214 · Cited by 81
Pesaranhajiabbas, E., Misra, M., & Mohanty, A. K. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126231 · Cited by 78
Moradi, S., & Yeganeh, J. K. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106735 · Cited by 75
Zhou, S., Yang, Y., Zhu, Z. M., Xie, Z., Sun, X., Jia, C., Liu, F., Wang, J., & Yang, J. (2021) · Polymer · doi:10.1016/j.polymer.2021.124027 · Cited by 71
Reactive Micro-Crosslinked Elastomer for Supertoughened Polylactide
Qu, Y., Chen, Y., Ling, X., Wu, J., Hong, J., Wang, H., & Li, Y. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00824 · Cited by 71
da Costa, F. A. T., Parra, D. F., Cardoso, E. C. L., & Güven, O. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02899-7 · Cited by 84
“PLA or Poly(lactic acid) is a renewable, bio-based and bio-degradable aliphatic thermoplastic polyester made from dextrose (sugar) extracted from biobased materials [1–6].”
Coiai, S., Lorenzo, M. L. D., Cinelli, P., Righetti, M. C., & Passaglia, E. (2021) · Polymers · doi:10.3390/polym13152489 · Cited by 72
Kuang, T., Ju, J., Liu, T., Hejna, A., Saeb, M. R., Zhang, S., & Peng, X. (2022) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-021-00390-2 · Cited by 69
Ge, X., Huang, X., Zhou, L., & Wang, Y. (2022) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2022.100977 · Cited by 68
Water absorption characterization of boron compounds-reinforced PLA/flax fiber sustainable composite
Avcı, A., Eker, A. A., Bodur, M. S., & Candan, Z. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123546 · Cited by 64
Aliotta, L., Gigante, V., Geerinck, R., Coltelli, M., & Lazzeri, A. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.107984 · Cited by 63
Benkraled, L., Zennaki, A., Zair, L., Arabeche, K., Berrayah, A., Barrera, A., Bouberka, Z., & Maschke, U. (2024) · Polymers · doi:10.3390/polym16070974 · Cited by 69
“Several strategies have been explored to address the limitations of PLA, including stereo-complexation, plasticization, filler incorporation, and polymer blending [1,13,17,18].”
BackgroundMcCutcheon, C. J., Zhao, B., Jin, K., Bates, F. S., & Ellison, C. J. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01759 · Cited by 65
Wang, R., Sun, X., Chen, L., & Liang, W. (2021) · RSC Advances · doi:10.1039/d0ra08813g · Cited by 61
Coudane, J., Berghe, H. V. D., Mouton, J., Garric, X., & Nottelet, B. (2022) · Molecules · doi:10.3390/molecules27134135 · Cited by 57
“They can advantageously replace mineral reinforcements in PLA matrices [3,4].”
BackgroundChen, X., Zhang, R., Mao, Y., Zhong, L., Lin, P., Deng, Q., Zheng, B., Shen, H., Feng, Z., & Zhang, H. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143419 · Cited by 58
Recent advances in compatibility and toughness of poly(lactic acid)/poly(butylene succinate) blends
Zhao, X., Zhang, D., Yu, S., Zhou, H., & Peng, S. (2021) · e-Polymers · doi:10.1515/epoly-2021-0072 · Cited by 61
Self-citationАржакова, О. В., Arzhakov, M. S., Badamshina, E. R., Bryuzgina, E. B., Bryuzgin, E. V., Bystrova, A. V., Vaganov, G., Vasilevskaya, V. V., Vdovichenko, A. Y., Gallyamov, M. O., et al. (2022) · Russian Chemical Reviews · doi:10.57634/rcr5062 · Cited by 60
Conductivity and dielectric properties of lithium-ion biopolymer blend electrolyte based film
Abdullah, O. G., Hanna, R. R., Ahmed, H. T., Mohamad, A. H., Saleem, S. A., & Saeed, M. A. M. (2021) · Results in Physics · doi:10.1016/j.rinp.2021.104135 · Cited by 55
Ge, Q.-Y., & Dou, Q. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01042 · Cited by 54
Nanostructured Phase Morphology of a Biobased Copolymer for Tough and UV-Resistant Polylactide
Xu, H., Zhou, J., Odelius, K., Guo, Z., Guan, X., & Hakkarainen, M. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00057 · Cited by 55
Ravoori, D., Salvi, S. S., Prajapati, H., Qasaimeh, M., Adnan, A., & Jain, A. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.1890986 · Cited by 49
“For PLA, tensile toughness can be increased through two distinct mechanisms – shear yielding and crazing energy (Zhao et al. 2020).”
BackgroundEffect of Crystallization on Shape Memory Effect of Poly(lactic Acid)
Nie, D., Yin, X., Cai, Z., & Wang, J. (2022) · Polymers · doi:10.3390/polym14081569 · Cited by 52
Biodegradable Substrates for Rigid and Flexible Circuit Boards: A Review
Dušek, K., Koc, D., Veselý, P., Froš, D., & Géczy, A. (2024) · Advanced Sustainable Systems · doi:10.1002/adsu.202400518 · Cited by 50
Papadopoulos, L., Klonos, P. Α., Terzopoulou, Z. N., Psochia, E. A., Sanusi, O. M., Hocine, N. A., Benelfellah, A., Giliopoulos, D. J., Triantafyllidis, K. S., Kyritsis, A., et al. (2021) · Polymer · doi:10.1016/j.polymer.2021.123457 · Cited by 47
Kiattipornpithak, K., Thajai, N., Kanthiya, T., Rachtanapun, P., Leksawasdi, N., Phimolsiripol, Y., Rohindra, D. R., Ruksiriwanich, W., Sommano, S. R., & Jantanasakulwong, K. (2021) · Polymers · doi:10.3390/polym13152429 · Cited by 44
Tailoring and Long-Term Preservation of the Properties of PLA Composites with “Green” Plasticizers
Murariu, M., Paint, Y., Murariu, O., Laoutid, F., & Dúbois, P. (2022) · Polymers · doi:10.3390/polym14224836 · Cited by 45
“, a plasticizer [29], an impact modifier [30], a flexible biodegradable (co)polyester [31], such as poly(butylene adipate-co-terephthalate) (PBAT), or other (co)polymers [32], etc.”
BackgroundKim, J., Oh, S. H., Song, M.-O., Jang, S., Kang, S. J., Kwak, S. K., & Jin, J. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111563 · Cited by 45
Qu, Y., Rong, C., Ling, X., Wu, J., Chen, Y., Wang, H., & Li, Y. (2022) · Macromolecules · doi:10.1021/acs.macromol.1c02273 · Cited by 45
Matumba, K. I., Mokhena, T. C., Ojijo, V. O., Sadiku, E. R., & Ray, S. S. (2024) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400056 · Cited by 54
Črešnar, K. P., Zemljič, L. F., Papadopoulos, L., Terzopoulou, Z. N., Zamboulis, A., Klonos, P. Α., Bikiaris, D. Ν., Kyritsis, A., & Pissis, P. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102192 · Cited by 44
Luna, C. B. B., Ferreira, E. D. S. B., Siqueira, D. D., Filho, E. A. D. S., & Araújo, E. M. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03856-x · Cited by 42
Kuang, T., Zhang, M., Lian, X., Zhang, J., Liu, T., Zhang, S., & Peng, X. (2021) · Composites Communications · doi:10.1016/j.coco.2021.101042 · Cited by 42
Soon, C. F., Yee, S. K., Nordin, A. N., Rahim, R. A., Ling, N., Hamid, I. S. L. A., Tee, K. S., Azmi, N. H., Sunar, N. M., & Heng, C. (2024) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-024-01027-2 · Cited by 42
“However, PLA also has some limitations, including poor ductility, low impact strength, brittleness, low crystallisation rate, and inadequate gas barrier [140].”
Gómez-Caturla, J., Oliveros, R. T., Martínez, J. I., Sanoguera, D. G., Balart, R., & García‐García, D. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-03000-y · Cited by 39
“…wide range of flexible polymers have been blended with PLA with and without compatibilizers, i.e. polyurethanes (PUs), polyethylene -co- glycidyl methacrylate (PE -co- GMA), polyethylene (PE), polypropylene (PP), poly-ε-caprolactone (PCL) and poly-butylene adipate -co- terephthalate (PBAT) [24–27].”
Hu, H., Xu, A., Zhang, D., Zhou, W., Peng, S., & Zhao, X. (2020) · Molecules · doi:10.3390/molecules25245951 · Cited by 39
“An effective way to overcome these drawbacks is to add other biodegradable materials to PLA [6].”
BackgroundSelf-citationZhang, H., Yuan, W.-Q., Weng, Y., Zeng, J., & Li, Y. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.114707 · Cited by 40
Sun, X., Niu, L., Cai, M., Liu, Z., Wang, Z., & Wang, J. (2023) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2023.108241 · Cited by 38
Yun, X., Liu, L., Hu, J. S., Sun, T., Zhang, J., & Dong, T. (2024) · Packaging Technology and Science · doi:10.1002/pts.2796 · Cited by 37
“216,217 Although blend modification is more easy operating and probably more economical to obtain flexible biodegradable packaging materials, some effective plasticisers or small molecule polymers, temperature and other conditions change gradually migrating from the plastic, usually resulting in…”
BackgroundCai, K., Wang, Q., Liu, X., Tu, S., Wang, J., & Feng, J. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c02812 · Cited by 35
Toughening of Poly( l -Lactide) with Branched Polycaprolactone: Effect of Chain Length
Yang, X., Liu, S., Yu, E., & Wei, Z. (2020) · ACS Omega · doi:10.1021/acsomega.0c04070 · Cited by 36
“13 The toughness of the blended PCL and PLA was not signi fi cantly improved, and the strength and modulus decreased, which was mainly attributed to the poor interface compatibility.”
He, W., Ye, L., Coates, P. D., Caton‐Rose, F., & Zhao, X. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.04.051 · Cited by 35
Self-citationFernández‐Tena, A., Otaegi, I., Irusta, L., Sebastián, V., Guerrica‐Echevarria, G., Müller, A. J., & Aranburu, N. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300213 · Cited by 34
Sanaka, R., Sahu, S. K., Sreekanth, P. S. R., Giri, J. P., Mohammad, F., Al‐Lohedan, H. A., Saharudin, M. S., & Ma, Q. (2025) · Polymers · doi:10.3390/polym17030338 · Cited by 34
“…is attributed to the increased stiffness and reduced ductility introduced by the rigid PLA matrix, coupled with the reinforcing effect of MXene [29]. improvement is a tt ributed to the sti ff ness and reduced ductility introduced by the rigid PLA matrix, coupled reinforcing e ff ect of MXene [29].”
Yang, R., Gu, G., Tang, C. Y., Miao, Z., Cao, H., Zou, G., & Li, J. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.109889 · Cited by 34
Synthesis of Novel Polymers with Biodegradability by Main-Chain Editing of Chiral Polyketones.
Yuan, H., Takahashi, K., Hayashi, S., Suzuki, M., Fujikake, N., Kasuya, K., Zhou, J., Nakagawa, S., Yoshie, N., Li, C., et al. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c04389 · Cited by 18
Research progress in fully biorenewable tough blends of polylactide and green plasticizers
Mazidi, M. M., Arezoumand, S., & Zare, L. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.135345 · Cited by 36
Influence of Ozonized Soybean Oil as a Biobased Plasticizer on the Toughness of Polylactic Acid
Chaochanchaikul, K., & Pongmuksuwan, P. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02264-6 · Cited by 35
Modified Biomass-Reinforced Polylactic Acid Composites
Zhu, J., Sun, H., Yang, B., & Weng, Y. (2024) · Materials · doi:10.3390/ma17020336 · Cited by 33
Xin, K., Wei, Y., Xiong, J.-X., Ni, Y., Wang, X., & Xu, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156743 · Cited by 32
Self-citationSherwani, S. F. K., Sapuan, S. M., Leman, Z., Zainudin, E. S., & Khalina, A. (2021) · Fibers and Polymers · doi:10.1007/s12221-021-0407-1 · Cited by 32
Extruded composite films based on polylactic acid and sodium alginate
Mortalò, C., Russo, P., Miorin, E., Zin, V., Paradisi, E., & Leonelli, C. (2023) · Polymer · doi:10.1016/j.polymer.2023.126162 · Cited by 32
Han, Y., Ning, N., Wang, Z., & Zhang, L. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01237 · Cited by 31
Burkov, A. A., Краев, А. Д., Grishin, M. V., Vesnin, R. L., Fomin, S. V., & Иорданский, А. Л. (2021) · Polymers · doi:10.3390/polym13071101 · Cited by 31
“A partial solution to this problem is to introduce epoxidized natural rubber [10–13] and its modifications [14–16], use functional modifiers in the process of reaction mixing [17,18], and pre-treat NR in order to increase its content of oxygen-containing groups [18,19].”
BackgroundBabaei, A., Abdolrasouli, M. H., & Rostami, A. (2022) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057221118823 · Cited by 33
Wang, Z., Zhang, K., Wang, H., Wu, X., Wang, H., Weng, C., Li, Y., Liu, S., & Yang, J. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c12383 · Cited by 31
The Diffusion of Bioplastics: What Can We Learn from Poly(Lactic Acid)?
Teixeira, L. V., Bomtempo, J. V., Oroski, F. D. A., & Coutinho, P. L. D. A. (2023) · Sustainability · doi:10.3390/su15064699 · Cited by 31
Khamis, F., Hegab, H. M., BANAT, F. A., Arafat, H. A., & Hasan, S. W. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145471 · Cited by 32
Analysis of the Damage Mechanism around the Crack Tip for Two Rubber-Toughened PLA-Based Blends
Gigante, V., Bosi, L., Parlanti, P., Gemmi, M., Aliotta, L., & Lazzeri, A. (2021) · Polymers · doi:10.3390/polym13224053 · Cited by 31
“For this reason, in this work, two different elastomers (PBAT and POE-g-GMA) already known in literature for their capability to toughen PLA [48,49] were investigated, correlating the macroscopically mechanical results to the micromechanical deformation mechanisms observed.”
Methodda Cunha, R. B., Agrawal, P., Lúcio, A. D. S., Brito, G. D. F., & de Mélo, T. J. A. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-03072-w · Cited by 32
Lohrasbi, P., & Yeganeh, J. K. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5435 · Cited by 31
Wu, Y., Hao, X., Lin, F., Wang, S., Chen, L., Lin, X., Gan, D., Fan, S., Song, L., & Liu, Y. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.08.082 · Cited by 29
Wu, J., Yin, Z., Sun, X., Zhang, X., Zhu, Z. M., Xu, Z. J., Yang, J., Xie, Z., Li, Y., Yang, X., et al. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.163 · Cited by 29
Fredi, G., Dorigato, A., Dussin, A., Xanthopoulou, E., Bikiaris, D. Ν., Botta, L., Fiore, V., & Pegoretti, A. (2022) · Molecules · doi:10.3390/molecules27196371 · Cited by 30
“Therefore, they can effectively decrease the size of the dispersed phase, promote its uniform distribution in the continuous phase, and increase the interfacial adhesion, thereby enhancing the overall physical-mechanical properties [45].”
Backgroundda Silva, L. R. C., Rios, A. D. O., & Santana, R. M. C. (2023) · Polymers from Renewable Resources · doi:10.1177/20412479231154924 · Cited by 36
Moslehi, A., Ajji, A., Heuzey, M., Rahimizadeh, A., & LESSARD, L. B. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51934 · Cited by 28
A review on biopolymer-derived electrospun nanofibers for biomedical and antiviral applications
Deshmukh, S., Kathiresan, M., & Kulandainathan, M. A. (2022) · Biomaterials Science · doi:10.1039/d2bm00820c · Cited by 29
Chen, K., Zhou, C. Y., Yao, L., Jing, M., Liu, C., Shen, C., & Wang, Y. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127079 · Cited by 28
Eco-friendly zinc-metal-organic framework as a nucleating agent for poly (lactic acid)
El‐Taweel, S. H., Hassan, S. S., & Ismail, K. M. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132691 · Cited by 28
Degradation of Structurally Modified Polylactide under the Controlled Composting of Food Waste
Трофимчук, Е. С., Ostrikova, V. V., Ivanova, O. A., Moskvina, M. A., Plutalova, A. V., Grokhovskaya, T. Y., Shchelushkina, A. A., Efimov, A., Chernikova, E. V., Zhang, S., et al. (2023) · Polymers · doi:10.3390/polym15194017 · Cited by 29
“…PLA with high performance properties are based on (1) the copolymerization of lactide with various monomers [7,8]; (2) the addition of plasticizers [9,10] ; (3) mixing PLA with other polymers or particles of inorganic nature [11–13] ; and (4) using structural and mechanical approaches [14–17].”
MethodQu, Y., Hong, J., Chen, Y., Ling, X., Wu, J., Wang, H., & Li, Y. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110619 · Cited by 29
Han, G., Yoon, J., Lee, C.-S., Lee, E., Yoon, K., Kwak, H. W., & Jin, H. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108155 · Cited by 28
Wang, S.-Y., Jiang, C. B., Xie, H.-H., Zeng, J., & Li, Y. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117447 · Cited by 27
Khamis, F., Hegab, H. M., & Hasan, S. W. (2024) · Desalination · doi:10.1016/j.desal.2024.118268 · Cited by 26
Sanchez, L. A. H., Woroch, C. P., Dumas, D. M., Waymouth, R. M., & Kanan, M. W. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.4c15697 · Cited by 27
Long-Term Evaluation of Poly(lactic acid) (PLA) Implants in a Horse: An Experimental Pilot Study
de Carvalho, J. R. G., Conde, G., Antonioli, M. L., Santana, C. H., Littiere, T. D. O., Dias, P. D. P., Chinelatto, M. A., Canola, P. A., Zara, F. J., & Ferraz, G. D. C. (2021) · Molecules · doi:10.3390/molecules26237224 · Cited by 27
“products, disposable materials, and the biomedical industry [4,5].”
BackgroundRecent Progress on Starch Maleate/Polylactic Acid Blends for Compostable Food Packaging Applications
Goswami, S. R., Nair, S. S., Sen, W., & Yan, N. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c04940 · Cited by 26
Macke, N., Hemmingsen, C. M., & Rowan, S. J. (2022) · Journal of Polymer Science · doi:10.1002/pol.20220127 · Cited by 28
Zhang, X., Yang, Y., Li, M., Wu, J., Zhu, Z. M., Bi, C., Xie, Y., Wang, T., Sun, Y., Yin, J., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123666 · Cited by 26
A Universal Toughening and Energy‐Dissipating Strategy for Impact‐Resistant 3D‐Printed Composites
Hong, X., Wang, P., Ma, Y., Yang, W., Zhang, J., Zhang, Z., & Li, Y. (2025) · Advanced Science · doi:10.1002/advs.202501450 · Cited by 25
Toughening modification of poly(lactic acid) using modified natural rubber
Tessanan, W., & Phinyocheep, P. (2021) · Iranian Polymer Journal · doi:10.1007/s13726-021-01000-0 · Cited by 25
“It can be suggested that a thermodynamic equilibrium between the rubber and PLA phases is not acquired because of the complexity of the polymeric chain motions and the low-diffusion ability between the two polymers [26, 43].”
BackgroundMa, M., Wang, X., Liu, K., Chen, S., Shi, Y., He, H., & Wang, X. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06887-5 · Cited by 25
“PLA has received extensive attention as a biodegradable resin with high mechanical strength and good processing performance [3, 4].”
BackgroundSelf-citationJi, R., Fan, M., Liang, L., Tian, C., Dong, S., Deng, C., Wu, H. B., Zhou, L., & Zhao, X. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.169602 · Cited by 27
Self-citationDoğancı, M. D., Caner, D., Doğancı, E., & Özkoç, G. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.50712 · Cited by 24
Bio-Based Poly(lactic acid)/Poly(butylene sebacate) Blends with Improved Toughness
Frone, A. N., Popa, M. S., Uşurelu, C. D., Panaitescu, D. M., Gabor, A. R., Nicolae, C. A., Raduly, F. M., Zaharia, A., & Alexandrescu, E. (2022) · Polymers · doi:10.3390/polym14193998 · Cited by 24
“A less costly, more time-efficient, and simple technique to obtain PLA-based materials with increased flexibility and toughness is blending PLA [35] with “softer” polymers that possess lower Tg, higher flexibility, and increased ductility as compared to PLA [36].”
Background
Metadata
- Authors
- Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S.
- Affiliations
- Hubei Provincial Key Laboratory of Green Materials for Light Industry (CN)
- Corresponding author
- Zhao, Xipo
- Peng, Shaoxian
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2020
- Volume
- 10
- Issue
- 22
- Pages
- 13316-13368
- ISSN
- 2046-2069 (ISSN-L)
- PMC
- PMC9051451
- OpenAlex
- W3014340192
- Cited by
- 465
- References
- 260
- Citations by year
- 2026: 62 · 2025: 81 · 2024: 107 · 2023: 74 · 2022: 80 · 2021: 53 · 2020: 8
- FWCI
- 3.59
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- RSC Advances (publishedVersion, cc-by-nc)
- PubMed Central (publishedVersion, cc-by-nc)
- PubMed (publishedVersion)
- Funders
- National Natural Science Foundation of China (51273060)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, polymer blends, toughening, blend morphology, particle size, interparticle distance, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.