The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Fault-tolerant control in variable speed drives: a survey
Abstract
A survey on fault-tolerant control is presented for variable speed drives (VSD), mainly addressing DC and induction motors. Thus, fault diagnosis, accommodation and hardware reconfiguration are reviewed with application to VSD. First, the most common fault scenarios in these electrical machines are described. These conditions are analysed, and their implications and mathematical modelling are discussed. Next, the fault diagnosis strategies based on signal processing, model-based techniques and artificial intelligence are reviewed. Moreover, the diverse hardware reconfiguration schemes of power actuators with semiconductor failures are detailed. A key piece in any VSD is the control algorithm, which can be severely affected in a fault condition. Finally, the fault accommodation schemes suggested so far in the literature are illustrated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The main problem for model-based techniques is robustness to system parameter changes and threshold choice for particular failure types.
“The main problem for model-based techniques is their robustness to system parameter changes and the threshold choice for the particular failure types in a given system [275].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [275]
Citations
Cites
Robust Model-Based Fault Diagnosis for Dynamic Systems
Chen, J., & Patton, R. J. (1999) · The Kluwer international series on Asian studies in computer and information science · doi:10.1007/978-1-4615-5149-2 · Cited by 4,273
Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy
Frank, P. M. (1990) · Automatica · doi:10.1016/0005-1098(90)90018-d · Cited by 3,545
Diagnosis and Fault-Tolerant Control
Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki, M. (2003) · Springer eBooks · doi:10.1007/978-3-662-05344-7 · Cited by 2,789
Analysis of Electric Machinery and Drive Systems
Krause, P. C., Wasynczuk, O., Sudhoff, S. D., Pekarek, S. D., & Institute of Electrical and Electronics Engineers (2013) · Wiley eBooks · doi:10.1002/9781118524336 · Cited by 2,683
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,392
Analysis of Electric Machinery and Drive Systems
Krause, P. C., Wasynczuk, O., & Sudhoff, S. D. (2002) · Institute of Electrical and Electronics Engineers eBooks · doi:10.1109/9780470544167 · Cited by 2,313
Multiphase induction motor drives – a technology status review
LEVI, E., Bojoi, R. I., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,620
A review of induction motors signature analysis as a medium for faults detection
Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,610
Electric Motor Drives: Modeling, Analysis, and Control
Krishnan, R. (2001) · Cited by 1,340
Trends in the application of model-based fault detection and diagnosis of technical processes
Isermann, R., & Ballé, P. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00053-1 · Cited by 1,186
Supervision, fault-detection and fault-diagnosis methods — An introduction
Isermann, R. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00046-4 · Cited by 962
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Welchko, B. A., Lipo, T. A., Jahns, T. M., & Schulz, S. E. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830074 · Cited by 724
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartheld, R. G. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1994.345491 · Cited by 638
A Review of Stator Fault Monitoring Techniques of Induction Motors
Siddique, A., Yadava, G. S., & Singh, B. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.837304 · Cited by 596
Recent developments of induction motor drives fault diagnosis using AI techniques
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873207 · Cited by 511
What stator current processing-based technique to use for induction motor rotor faults diagnosis?
Benbouzid, M., & Kliman, G. B. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811741 · Cited by 486
Cruz, S. M. A., & Cardoso, A. J. M. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.952496 · Cited by 464
Fault detection of open-switch damage in voltage-fed PWM motor drive systems
Ribeiro, R. L. A., Jacobina, C. B., da Silva, E. R. C., & Lima, A. M. N. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.809351 · Cited by 441
Investigation of fault modes of voltage-fed inverter system for induction motor drive
Kastha, D., & Bose, B. K. (1994) · IEEE Transactions on Industry Applications · doi:10.1109/28.297920 · Cited by 386
Fault detection and isolation on a PWM inverter by knowledge-based model
Peuget, R., Courtine, S., & Rognon, J. P. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.739017 · Cited by 384
Experimental fault-tolerant control of a PMSM drive
Bolognani, S., Zordan, M., & Zigliotto, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873223 · Cited by 382
A strategy for improving reliability of field-oriented controlled induction motor drives
Liu, T., Fu, J.-R., & Lipo, T. A. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.245714 · Cited by 374
Investigation of fault modes of voltage-fed inverter system for induction motor drive
Kastha, D., & Bose, B. K. (2003) · doi:10.1109/ias.1992.244307 · Cited by 370
Fault detection and isolation on a PWM inverter by knowledge-based model
Peuget, R., Courtine, S., & Rognon, J. P. (2002) · Conference record · doi:10.1109/ias.1997.629048 · Cited by 304
Fault-Tolerant Voltage-Fed PWM Inverter AC Motor Drive Systems
Ribeiro, R. L. A., Jacobina, C. B., da Silva, E. R. C., & Lima, A. M. N. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825284 · Cited by 299
Diagnosis by parameter estimation of stator and rotor faults occurring in induction machines
Bachir, S., Tnani, S., Trigeassou, J., & Champenois, G. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.874258 · Cited by 287
Operation of a Medium-Voltage Drive Under Faulty Conditions
Rodríguez, J., Hammond, P. W., Pontt, J. O., Musalem, R., Lezana, P., & Escobar, M.-J. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.851645 · Cited by 282
Concepts and methods in fault-tolerant control
Blanke, M., Staroswiecki, Μ., & Wu, N. E. (2001) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2001.946264 · Cited by 275
Cruz, S. M. A., & Cardoso, A. J. M. (2002) · doi:10.1109/ias.2000.881141 · Cited by 259
Performance analysis of a three-phase induction motor under mixed eccentricity condition
Nandi, S., Bharadwaj, R. M., & Toliyat, H. A. (2002) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2002.801995 · Cited by 245
Application of model-based fault detection to a brushless DC motor
Moseler, O., & Isermann, R. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873209 · Cited by 241
An Amplitude Modulation Detector for Fault Diagnosis in Rolling Element Bearings
Stack, J. R., Harley, R. G., & Habetler, T. G. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.834971 · Cited by 225
Induction motor fault diagnosis based on neuropredictors and wavelet signal processing
Kim, K., & Parlos, A. G. (2002) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2002.1011258 · Cited by 211
Benbouzid, M., Diallo, D., & Zeraoulia, M. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2006.889579 · Cited by 199
A Fault-Tolerant Control Architecture for Induction Motor Drives in Automotive Applications
Diallo, D., Benbouzid, M., & Makouf, A. (2004) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2004.833610 · Cited by 194
Current signature analysis of induction motor mechanical faults by wavelet packet decomposition
Ye, Z., Wu, B., & Sadeghian, A. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.819682 · Cited by 191
Liu, X.-Q., Zhang, H., Liu, J., & Yang, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873210 · Cited by 180
Sensor fault tolerant control using sliding mode observers
Edwards, C., & Tan, C. P. (2005) · Control Engineering Practice · doi:10.1016/j.conengprac.2005.05.002 · Cited by 175
An induction motor drive system with improved fault tolerance
Corrêa, M. B. D. R., Jacobina, C. B., da Silva, E. R. C., & Lima, A. M. N. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.924770 · Cited by 175
Fuzzy inference systems implemented on neural architectures for motor fault detection and diagnosis
Altug, S., Chen, M.-Y., & Trussell, H. J. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.807988 · Cited by 172
Dynamic simulation of dynamic eccentricity in induction machines-winding function approach
Joksimović, G., Durovic, M. D., Penman, J., & Arthur, N. (2000) · IEEE Transactions on Energy Conversion · doi:10.1109/60.866991 · Cited by 163
Induction Machine Fault Diagnostic Analysis With Wavelet Technique
Chow, T. W. S., & Su, H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825325 · Cited by 158
Implicit fault-tolerant control: application to induction motors
Bonivento, C., Isidori, A., Marconi, L., & Paoli, A. (2003) · Automatica · doi:10.1016/j.automatica.2003.10.003 · Cited by 153
Comparative investigation of diagnostic media for induction motors: a case of rotor cage faults
Trzynadlowski, A. M., & Ritchie, E. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873218 · Cited by 152
An induction motor drive system with improved fault tolerance
Correa, M. B. D. R., Jacobina, C. B., da Silva, E. R. C., & Lima, A. M. N. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2000.883112 · Cited by 146
Global observability analysis of sensorless induction motors
Ibarra-Rojas, S., Moreno, J. A., & Espinosa–Pérez, G. (2004) · Automatica · doi:10.1016/j.automatica.2004.01.020 · Cited by 121
Lee, K.-S., & Ryu, J. (2003) · IEE Proceedings - Control Theory and Applications · doi:10.1049/ip-cta:20030596 · Cited by 108
Observability conditions of induction motors at low frequencies
de Wit, C. C., Youssef, A., Barbot, J. P., Martin, P., & Malrait, F. (2002) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2000.914093 · Cited by 104
Fault detection and diagnosis of rotating machinery
Loparo, K. A., Adams, M. L., Lin, W., Abdel-Magied, M. F., & Afshari, N. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873208 · Cited by 104
Diagnosis Tool for Motor Condition Monitoring
Ilonen, J., Kämäräinen, J., Lindh, T., Ahola, J., Kalviainen, H. A., & Partanen, J. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.851001 · Cited by 97
Kastha, D., & Bose, B. K. (1994) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.303793 · Cited by 93
Fuzzy logic-based decision-making for fault diagnosis in a DC motor
Miguel, L. J., & Blázquez, L. F. (2005) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2004.11.002 · Cited by 85
Sensorless fault diagnosis of induction motors
Kim, K., Parlos, A. G., & Bharadwaj, R. M. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817693 · Cited by 81
HOS-based nonparametric and parametric methodologies for machine fault detection
Chow, T. W. S., & Tan, H. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873213 · Cited by 79
Dynamic simulation of cage induction machine with air gap eccentricity
Joksimović, G. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20041229 · Cited by 72
Sensor fault-tolerant control of a rail traction drive
Bennett, S. M., PATTON, R. J., & Daley, S. (1999) · Control Engineering Practice · doi:10.1016/s0967-0661(98)00151-8 · Cited by 71
A model of asynchronous machines for stator fault detection and isolation
Chang, X., Cocquempot, V., & Christophe, C. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.812471 · Cited by 71
Reconfigurable fault-tolerant control using GIMC structure
Campos-Delgado, D. U., & Zhou, K. (2003) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2003.811263 · Cited by 70
Self-citationSimulation and fault detection of three-phase induction motors
Liang, B., Payne, B., Ball, A. D., & Iwnicki, S. (2002) · Mathematics and Computers in Simulation · doi:10.1016/s0378-4754(02)00064-2 · Cited by 59
Integrated Fault-Tolerant Scheme for a DC Speed Drive
Campos-Delgado, D. U., Martinez-Martinez, S., & Zhou, K. (2005) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2005.852494 · Cited by 59
Self-citationTakagi-Sugeno Fuzzy Fault-Tolerant Control of an Induction Motor
Lopez-Toribio, C. J., PATTON, R. J., & Daley, S. (2000) · Neural Computing and Applications · doi:10.1007/s005210070031 · Cited by 52
Hierarchical motor diagnosis utilizing structural knowledge and a self-learning neuro-fuzzy scheme
Fuessel, D., & Isermann, R. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873215 · Cited by 50
Fault-tolerant reversible ac motor drive system
Jacobina, C. B., Ribeiro, R. L. A., Lima, A. M. N., & da Silva, E. R. C. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.814567 · Cited by 49
Fault tolerant operation of induction motor drives with automatic controller reconfiguration
Sepe, R. B., Fahimi, B., Morrison, C., & Miller, J. M. (2002) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2001.939291 · Cited by 48
Adaptive observer design for robust fault estimation
Jiang, B., & Staroswiecki, M. (2002) · International Journal of Systems Science · doi:10.1080/00207720210144776 · Cited by 46
Kastha, D., & Bose, B. K. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.395290 · Cited by 43
Advanced Fault Diagnosis of a DC Motor
Hajiaghajani, M., Toliyat, H. A., & Panahi, I. M. S. (2004) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.819101 · Cited by 38
Kastha, D., & Bose, B. K. (2002) · Conference record · doi:10.1109/ias.1994.345443 · Cited by 36
Analytical investigation of an induction motor drive under inverter fault mode operations
Klíma, J. (2003) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20030122 · Cited by 36
Faiz, J., Tabatabaei, I., & Sharifi-Ghazvini, E. (2004) · Electromagnetics · doi:10.1080/02726340490467637 · Cited by 32
Zidani, F., Benbouzid, M., Diallo, D., & Benchaib, A. (2003) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2003.1210309 · Cited by 29
Torque and flux estimation for a rail traction system in the presence of intermittent sensor faults
Bennett, S. M. (1996) · doi:10.1049/cp:19960529 · Cited by 29
Observer-based Fault Detection and Isolation for Nonlinear Systems
Lootsma, T. F. (2001) · Cited by 27
Model-based broken rotor bar detection on an IFOC driven squirrel cage induction motor
Rodríguez-Cortés, H., Hadjicostis, C. N., & Stanković, A. M. (2004) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.23919/acc.2004.1384384 · Cited by 23
Link between high-gain observer-based and parity space residuals for FDI
Christophe, C., Cocquempot, V., & Jiang, B. (2004) · Transactions of the Institute of Measurement and Control · doi:10.1191/0142331204tm125oa · Cited by 16
Energetic approach to parametric fault detection and isolation
Fantuzzi, C., & Secchi, C. (2004) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.23919/acc.2004.1384648 · Cited by 15
A Fault Tolerant Control Design for Induction Motors
Fekih, A., & Chowdhury, F. N. (2006) · Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics · doi:10.1109/icsmc.2005.1571330 · Cited by 13
A diversity based reconfigurable method for fault tolerant control of induction motors
Tahami, F., Shojaei, A. A., & Khatir, D. A. (2006) · doi:10.1109/speedam.2006.1649746 · Cited by 9
Variable Structure Design of a Fault Tolerant Control System for Induction Motors
Dongmo, J.-E., Kwatny, H. G., Nwankpa, C. O., Bajpai, G., & Teolis, C. (2007) · IEEE Electric Ship Technologies Symposium (ESTS) · doi:10.1109/ests.2007.372137 · Cited by 8
Multiphase induction motors for a variable speed drive
Glukhov, D. M., & Muravleva, O. (2005) · doi:10.1109/spcmtt.2003.1438163 · Cited by 3
Flagged first, then by citations
Research works printed but not linked: 14
- Glukhov, 2003, Modern Techniques and Technologies. Proc. 9th Int. Scientific and Practical Conference, 128
- Gopalarathnam, 2000, Proc. IEEE-IAS Annual Metting
- Levi, 2007, 1, 489
- Claudio, 2004, lnt. Conf. Electrical and Electronics Engineering
- Tallam, 2003, SDEMPED
- Thomson, 2003, Proc. 32nd Turbomachinery Symp., 145
- Haji, 2001, Annual Conf. IEEE Industrial Electronics Society
- De Miguel, 2005, 18, 423
- Espinoza-Trejo, 2006, 2006 Int. Conf. Dynamics, Instrumention, and Control
- Chan, 2004, Control 2004
- Kwak, 2002, Industrial Electronics Society, 2002, IECON 02, 28th Annual Conf. IEEE, 886
- Wang, 2002, Applied Power Electronics Conf., 2005, APEC 05, 20th Annual Conf. IEEE, 886
- Tahami, 2006, Int. Symp. Power Electonics, Electrical Drives, Automation and Motion, 66
- Monmasson, Proc. IEEE Int. Symp. Industrial Electronics ISIE 2002, 3, 828
Cited by
Sorted by citations
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Survey on Fault-Tolerant Techniques for Power Electronic Converters
Zhang, W., Xu, D., Enjeti, P. N., Li, H., Hawke, J. T., & Krishnamoorthy, H. S. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2304561 · Cited by 590
A Robust Observer-Based Sensor Fault-Tolerant Control for PMSM in Electric Vehicles
Kommuri, S. K., Defoort, M., Karimi, H. R., & Veluvolu, K. C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2590993 · Cited by 408
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“The main problem for model-based techniques is their robustness to system parameter changes and the threshold choice for the particular failure types in a given system [275].”
BackgroundJlassi, I., Estima, J. O., El Khil, S. K., Bellaaj, N. M., & Cardoso, A. J. M. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2616398 · Cited by 284
Campos-Delgado, D. U., & Espinoza-Trejo, D. R. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2047829 · Cited by 224
Self-citationA Survey on Active Fault-Tolerant Control Systems
Abbaspour, A., Mokhtari, S., Sargolzaei, A., & Yen, K. K. (2020) · Electronics · doi:10.3390/electronics9091513 · Cited by 221
Mohammadpour, A., Sadeghi, S., & Parsa, L. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2247011 · Cited by 210
Chakraborty, C., & Verma, V. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345337 · Cited by 209
Design of a Fault-Tolerant Controller Based on Observers for a PMSM Drive
Akrad, A., Hilairet, M., & Diallo, D. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2050756 · Cited by 155
Zhou, D., Zhao, J., & Liu, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2338395 · Cited by 140
Manohar, M., & Das, S. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2714675 · Cited by 136
FPGA-Based Reconfigurable Control for Fault-Tolerant Back-to-Back Converter Without Redundancy
Shahbazi, M., Poure, P., Saadate, S., & Zolghadri, M. R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2200214 · Cited by 125
Wang, R., Zhao, J., & Liu, Y. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2119381 · Cited by 120
Detection and Discrimination of Open Phase Fault in Permanent Magnet Synchronous Motor Drive System
Hang, J., Zhang, J., & Cheng, M. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2479399 · Cited by 115
Tousizadeh, M., Seng, H., Selvaraj, J. A.-L., Rahim, N. A., & Ooi, B. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2850006 · Cited by 114
Tabbache, B., Benbouzid, M., Kheloui, A., & Bourgeot, J. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2230200 · Cited by 102
Fault tolerant steer-by-wire systems: An overview
Huang, C., Naghdy, F., Du, H., & Huang, H. (2019) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2019.04.001 · Cited by 99
Campos-Delgado, D. U., Pecina-Sánchez, J. Á., Espinoza-Trejo, D. R., & Arce-Santana, E. (2013) · IET Electric Power Applications · doi:10.1049/iet-epa.2013.0015 · Cited by 95
Self-citationSimple Fault Diagnosis Based on Operating Characteristic of Brushless Direct-Current Motor Drives
Park, B.-G., Lee, K., Kim, R.-Y., Kim, T., Ryu, J.-S., & Hyun, D.-S. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072895 · Cited by 93
Choi, C., & Lee, W. (2012) · IET Electric Power Applications · doi:10.1049/iet-epa.2011.0315 · Cited by 91
Mekri, F., Elghali, S. B., & Benbouzid, M. (2012) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2012.2227126 · Cited by 85
Farhadi, M., Fard, M. T., Abapour, M., & Hagh, M. T. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2683534 · Cited by 84
Jlassi, I., & Cardoso, A. J. M. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2918062 · Cited by 78
A Control Reconfiguration Strategy for Post-Sensor FTC in Induction Motor-Based EVs
Tabbache, B., Rizoug, N., Benbouzid, M., & Kheloui, A. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2232325 · Cited by 77
Godoy, W. F., da Silva, I. N., Goedtel, A., Palácios, R. H. C., & Lopes, T. D. (2016) · IET Electric Power Applications · doi:10.1049/iet-epa.2015.0469 · Cited by 74
Robust fault-tolerant control of networked control systems with stochastic actuator failure
Peng, C., Yang, T., & Tian, E. (2010) · IET Control Theory and Applications · doi:10.1049/iet-cta.2009.0427 · Cited by 73
Zheng, P., Wu, F., Lei, Y., Sui, Y., & Yu, B. (2013) · Energies · doi:10.3390/en6104980 · Cited by 70
Speed Sensor Fault Tolerant PMSM Machines: From Position-Sensorless to Sensorless Control
Verrelli, C. M., Bifaretti, S., Carfagna, E., Lidozzi, A., Solero, L., Crescimbini, F., & Benedetto, M. D. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2908337 · Cited by 68
Bhuiyan, E. A., Akhand, M. M. A., Das, S. K., Ali, M. F., Tasneem, Z., Islam, M. R., Saha, D. K., Badal, F. R., Ahamed, M. H., & Moyeen, S. I. (2020) · International Journal of Automation and Computing · doi:10.1007/s11633-020-1250-3 · Cited by 68
Espinoza-Trejo, D. R., Campos-Delgado, D. U., Bárcenas, E., & Martínez-López, F. J. (2012) · IET Power Electronics · doi:10.1049/iet-pel.2011.0309 · Cited by 67
Self-citationMartínez-Morales, J. D., Palacios-Hernandez, E. R., & Campos-Delgado, D. U. (2016) · Electrical Engineering · doi:10.1007/s00202-016-0487-x · Cited by 66
Self-citationWavelet fault diagnosis and tolerant of induction motor: A review
Gaeid, K. S., & Ping, H. W. (2011) · International Journal of the Physical Sciences · doi:10.5897/ijps10.632 · Cited by 65
Hang, J., Xia, M., Ding, S., Li, Y., Sun, L., & Wang, Q. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2918683 · Cited by 64
Hang, J., Ding, S., Ren, X., Hu, Q., Huang, Y., Hua, W., & Wang, Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3073774 · Cited by 59
A new method for modeling and vector control of unbalanced induction motors
Jannati, M., Idris, N. R. N., & Salam, Z. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342483 · Cited by 59
Smooth Fault-Tolerant Control of Induction Motor Drives With Sensor Failures
Liu, Y., Stettenbenz, M., & Bazzi, A. M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2848964 · Cited by 57
An improved fault-tolerant control scheme for PWM inverter-fed induction motor-based EVs
Tabbache, B., Benbouzid, M., Kheloui, A., Bourgeot, J., & Mamoune, A. (2013) · ISA Transactions · doi:10.1016/j.isatra.2013.07.004 · Cited by 56
Integration of Interturn Fault Diagnosis and Fault-Tolerant Control for PMSM Drive System
Hang, J., Sun, W., Hu, Q., Ren, X., & Ding, S. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3134821 · Cited by 55
Fault-Tolerant Five-Leg Converter Topology With FPGA-Based Reconfigurable Control
Shahbazi, M., Poure, P., Saadate, S., & Zolghadri, M. R. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2191754 · Cited by 54
Choi, C., Lee, K., & Lee, W. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350453 · Cited by 53
Active Common-Mode Voltage-Based Open-Switch Fault Diagnosis of Inverters in IM-Drive Systems
Cheng, Y., Sun, Y., Li, X., Dan, H., Lin, J., & Su, M. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2965430 · Cited by 53
Single-Phase to Three-Phase Drive System Using Two Parallel Single-Phase Rectifiers
Jacobina, C. B., dos Santos, E. C., Rocha, N., & Fabrício, E. L. L. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2037420 · Cited by 52
Zhang, J., Hang, J., Ding, S., & Cheng, M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2587670 · Cited by 49
Zhao, W., Cheng, M., Chau, K. T., & Chan, C. C. (2012) · IET Electric Power Applications · doi:10.1049/iet-epa.2011.0144 · Cited by 48
Pecina-Sánchez, J. Á., Campos-Delgado, D. U., Espinoza-Trejo, D. R., Fernández, A., & Angelo, C. H. D. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2018.5237 · Cited by 47
Self-citationFault-Tolerant Control of Position Signals for Switched Reluctance Motor Drives
Shao, J., Deng, Z., & Gu, Y. X. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2669190 · Cited by 46
Kim, K., Gu, B.-G., & Jung, I.-S. (2011) · IET Electric Power Applications · doi:10.1049/iet-epa.2010.0272 · Cited by 45
Gálvez-Carrillo, M., & Kinnaert, M. (2010) · Renewable Energy · doi:10.1016/j.renene.2010.10.021 · Cited by 44
Fault-tolerant cruise control of electric vehicles with induction motors
Marino, R., Scalzi, S., Tomei, P., & Verrelli, C. M. (2013) · Control Engineering Practice · doi:10.1016/j.conengprac.2013.02.011 · Cited by 44
Speed sensor fault tolerant controller design for induction motor drive in EV
Aouaouda, S., Chadli, M., & Boukhnifer, M. (2016) · Neurocomputing · doi:10.1016/j.neucom.2016.06.001 · Cited by 43
Online Voltage Sensorless High-Resistance Connection Diagnosis in Induction Motor Drives
de la Barrera, P. M., Bossio, G. R., & Leidhold, R. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2385038 · Cited by 38
DSPACE‐based implementation for observer backstepping power control of DFIG wind turbine
Bossoufi, B., Karim, M., Taoussi, M., Aroussi, H. A., Bouderbala, M., Motahhir, S., & Camara, M. B. (2020) · IET Electric Power Applications · doi:10.1049/iet-epa.2020.0364 · Cited by 38
Sensor fault detection and isolation in three-phase systems using a signal-based approach
Gálvez-Carrillo, M., & Kinnaert, M. (2010) · IET Control Theory and Applications · doi:10.1049/iet-cta.2009.0536 · Cited by 37
Open-Phase Fault Detection in Delta-Connected PMSM Drive Systems
Hang, J., Ding, S., Zhang, J., Cheng, M., & Wang, Q. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2772793 · Cited by 35
Current sensors fault detection and tolerant control strategy for three-phase induction motor drives
Azzoug, Y., Sahraoui, M., Pusca, R., Ameid, T., Romary, R., & Cardoso, A. J. M. (2020) · Electrical Engineering · doi:10.1007/s00202-020-01120-5 · Cited by 35
Alternating Current Drives in the Steel Industry
Chattopadhyay, A. K. (2010) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2010.938719 · Cited by 33
Rkhissi-Kammoun, Y., Ghommam, J., Boukhnifer, M., & Mnif, F. (2018) · Mathematics and Computers in Simulation · doi:10.1016/j.matcom.2018.09.010 · Cited by 33
Shahbazi, M., Saadate, S., Poure, P., & Zolghadri, M. R. (2016) · Electric Power Systems Research · doi:10.1016/j.epsr.2016.04.004 · Cited by 32
Estima, J. O., & Cardoso, A. J. M. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342310 · Cited by 31
Shen, Q., Yue, C., Yu, X. Y., & Goh, C.-H. (2020) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2020.2971959 · Cited by 29
Common Predictive Model for PMSM Drives With Interturn Fault Considering Torque Ripple Suppression
Li, W., Hang, J., Ding, S., & Wang, Q. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3232820 · Cited by 28
Sensorless fault tolerant control for induction motors
Djeghali, N., Ghanes, M., Djennoune, S., & Barbot, J. (2013) · International Journal of Control Automation and Systems · doi:10.1007/s12555-012-9224-z · Cited by 27
Sun, P., Jia, S., Liang, D., & Qu, R. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3340750 · Cited by 26
New fault-tolerant flux-mnemonic doubly-salient permanent-magnet motor drive
Yu, C., & Chau, K. T. (2011) · IET Electric Power Applications · doi:10.1049/iet-epa.2009.0300 · Cited by 26
Reversible AC Drive Systems Based on Parallel AC–AC DC-Link Converters
Jacobina, C. B., dos Santos, E. C., Rocha, N., Gouveia, B. D. S., & da Silva, E. R. C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049724 · Cited by 26
Augmented-State-Observer-Based Diagnostics of Open-Circuit and Sensor Faults in DFIG Wind Turbines
Yahiaoui, M.-A., Kinnaert, M., & Gyselinck, J. J. C. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3309737 · Cited by 25
Wavelet Entropy-Based Traction Inverter Open Switch Fault Diagnosis in High-Speed Railways
Hu, K., Liu, Z., & Lin, S. (2016) · Entropy · doi:10.3390/e18030078 · Cited by 25
SENSOR FAULTS DETECTION AND ESTIMATION FOR A DFIG EQUIPPED WIND TURBINE
Abdelmalek, S., Rezazi, S., & Azar, A. T. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.11.164 · Cited by 25
Raj, N., Mathew, J., Jagadanand, G., & George, S. (2016) · Procedia Technology · doi:10.1016/j.protcy.2016.08.159 · Cited by 24
Abdel-Khalik, A. S., Ahmed, S., & Massoud, A. M. (2016) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2016.2565819 · Cited by 22
Research on fault analysis and fault-tolerant control of EV/HEV powertrain
Tabbache, B., Kheloui, A., Benbouzid, M., Mamoune, A., & Diallo, D. (2014) · International Conference on Green Energy (ICGE) · doi:10.1109/icge.2014.6835436 · Cited by 19
Khil, S. K. E., Jlassi, I., Estima, J. O., Bellaaj, N. M., & Cardoso, A. J. M. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062382 · Cited by 19
Li, W., Lin, L., Gao, H., Li, D., Zhang, X., & Fan, Y. (2018) · IET Electric Power Applications · doi:10.1049/iet-epa.2017.0631 · Cited by 19
Petrov, A., Владимирович, П. И., Rassõlkin, A., Vaimann, T., Kallaste, A., & Belahcen, A. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062334 · Cited by 18
Control of Three-Phase Induction Machine Drives During Open-Circuit Fault: A Review
Tabasian, R., Ghanbari, M., Esmaeli, A., & Jannati, M. (2020) · IETE Journal of Research · doi:10.1080/03772063.2020.1724833 · Cited by 18
Quantitative Fault Severity Estimation for High-Resistance Connection in PMSM Drive System
Hang, J., Yan, D., Xia, M., Ding, S., & Wang, Q. (2019) · IEEE Access · doi:10.1109/access.2019.2901121 · Cited by 18
Verrelli, C. M., Lorenzani, E., Fornari, R., Mengoni, M., & Zarri, L. (2018) · Control Engineering Practice · doi:10.1016/j.conengprac.2018.08.016 · Cited by 17
A Comprehensive Review of Universal Fast-Charging Techniques for 400-V and 800-V Electric Vehicles
Sadi, M. H., Sadeghi, Z., & Bauman, J. (2025) · IEEE Access · doi:10.1109/access.2025.3603845 · Cited by 21
PWM inverter-fed induction motor-based electrical vehicles fault-tolerant control
Tabbache, B., Benbouzid, M., Kheloui, A., Bourgeot, J., & Mamoune, A. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700506 · Cited by 16
Hybrid Electric Vehicle Fault Tolerant Control
Meyer, R. T., Johnson, S. C., DeCarlo, R. A., Pekarek, S., & Sudhoff, S. D. (2017) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.4037270 · Cited by 16
Induction motor windings faults detection using flux-error based MRAS estimators
Bednarz, S. A., & Dybkowski, M. (2019) · Diagnostyka · doi:10.29354/diag/109092 · Cited by 16
Klimkowski, K., & Dybkowski, M. (2016) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/epepemc.2016.7752143 · Cited by 16
Shi, S., Sun, Y., Li, X., Dan, H., & Su, M. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.2999692 · Cited by 15
Optimized OP-FTC for SPMSM Considering Copper Loss Minimization
Ding, S., Ma, K., Fan, J., Hang, J., & Tan, H. (2022) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2022.3162647 · Cited by 14
DSP-based sensor fault-tolerant control of electric vehicle powertrains
Tabbache, B., Benbouzid, M., Kheloui, A., & Bourgeot, J. (2011) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2011.5984482 · Cited by 14
Speed and Current Sensor Fault-Tolerant-Control of the Induction Motor Drive
Dybkowski, M., Klimkowski, K., & Orłowska-Kowalska, T. (2016) · Studies in systems, decision and control · doi:10.1007/978-3-319-45735-2_7 · Cited by 14
Zhang, X., Gauthier, J.-Y., & Lin-Shi, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3094478 · Cited by 14
Tabbache, B., Benbouzid, M., Kheloui, A., & Bourgeot, J. (2012) · International Journal of Vehicular Technology · doi:10.1155/2012/608381 · Cited by 14
Shahbazi, M., Zolghadri, M. R., Poure, P., & Saadate, S. (2013) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2013.6505922 · Cited by 14
Lee, C. H. T., Chau, K. T., & Liu, C. (2015) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2014.0414 · Cited by 14
Neural Network Based Fault Diagnosis of Three Phase Inverter Fed Vector Control Induction Motor
Chérif, B. D. E., Bendiabdellah, A., Bendjebbar, M., & Tamer, A. (2019) · Periodica Polytechnica Electrical Engineering and Computer Science · doi:10.3311/ppee.14315 · Cited by 14
Hussein, A. M., Obed, A. A., Zubo, R. H. A., Al‐Yasir, Y. I. A., Saleh, A. L., Fadhel, H., Sheikh-Akbari, A., Mokryani, G., & Abd‐Alhameed, R. A. (2022) · Electronics · doi:10.3390/electronics11081253 · Cited by 14
Chen, F., Fan, J., Li, W., Fang, J., & Ding, S. (2022) · Results in Engineering · doi:10.1016/j.rineng.2022.100590 · Cited by 13
Modulation Effects in an Inverter Fed Nine-Phase Induction Motor Drive
Bastos, R. R., de Souza, T. S., & Filho, B. J. C. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2938739 · Cited by 13
Behavior of electric vehicles and traction drives during sensor faults
Aguilera, F., de la Barrera, P. M., & Angelo, C. H. D. (2012) · IEEE International Conference on Industry Applications · doi:10.1109/induscon.2012.6453764 · Cited by 13
Survey on Fault-Tolerant Diagnosis and Control Systems Applied to Multi-motor Electric Vehicles
da Silveira, A. M. M., Araújo, R. E., & de Castro, R. P. (2011) · IFIP International Federation for Information Processing/IFIP · doi:10.1007/978-3-642-19170-1_39 · Cited by 12
Estima, J. O., & Cardoso, A. J. M. (2012) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2012.6350221 · Cited by 12
Single-Observer Based Current Sensor Fault Tolerant Control for IM Traction Drives
Venghi, L. E., Aguilera, F., de la Barrera, P. M., & Angelo, C. H. D. (2021) · IEEE Latin America Transactions · doi:10.1109/tla.2021.9480151 · Cited by 12
Espinoza-Trejo, D. R., & Campos-Delgado, D. U. (2009) · IET Control Theory and Applications · doi:10.1049/iet-cta.2008.0377 · Cited by 12
Self-citation
Metadata
- Authors
- Campos-Delgado, D. U., Espinoza-Trejo, D. R., & Palacios, E.
- Affiliations
- Autonomous University of San Luis Potosí (MX)
- Venue
- IET Electric Power Applications
- Published
- 2008-03
- Volume
- 2
- Issue
- 2
- Pages
- 121-134
- ISSN
- 1751-8660 (ISSN-L)
- 1751-8679
- OpenAlex
- W2154152725
- Cited by
- 228
- References
- 81
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 5 · 2023: 7 · 2022: 10 · 2021: 15 · 2020: 18 · 2019: 23 · 2018: 14 · 2017: 15 · 2016: 24 · 2015: 10 · 2014: 12 · 2013: 18 · 2012: 19
- FWCI
- 10.18
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IET Electric Power Applications (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Keywords
- fault-tolerant control, variable frequency drive, DC motor, induction motor, fault diagnosis, fault accommodation, hardware reconfiguration, model-based fault diagnosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
