High on/off ratio black phosphorus based memristor with ultra-thin phosphorus oxide layer
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
The scaling down of switching media encounters high leakage current in the traditional oxide material based memristors, resulting in high power consumption of chips. Two-dimensional (2D) materials promise an ultimate device scaling down to atomic layer thickness. Herein, black phosphorus (BP) and its self-assembly phosphorous oxide (BP) memristors are constructed, which leverages the high on/off ratio operation of oxides and low leakage current of 2D materials with high performance. The memristors exhibit reproducible and reliable switching characteristics with the on/off ratio >107 and data retention >104 s. Depending on the high reproducibility, basic “AND” and “OR” gates have been constructed on flexible substrates. Moreover, on the basis of the symmetry and linearity of conductance in the devices, the neural network simulation for supervised learning presents an online learning accuracy of 91.4%. This work opens an avenue for future flexible electronics.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, most of those studies in fact only measured the figures-of-merit of one/few devices and simulated the accuracy of an ANN via software62–67 in such type of studies the connection between the memristors fabricated and the ANN is relatively weak.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [64]
In the citing paper
“some articles focused on the fabrication and device-level characterization of one/few memristors62–70,186,187, also present some of the figures-of-merit generated by a software-based training ANN process (similar to the ones in Fig. 14) in order to claim that their devices exhibit potential for neuromorphic applications.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [64]
In the citing paper
“Crossbar arrays of two-terminal metal/insulator/metal (MIM) memristive devices can be fabricated easily using standard lithography and deposition techniques; this has been readily achieved by multiple groups57,64,68–70,85,93,105,216,217.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [64]
Citations
Cites
Hybrid graphene–quantum dot phototransistors with ultrahigh gain
Konstantatos, G., Badioli, M., Gaudreau, L., Osmond, J., Bernechea, M., de Arquer, F. P. G., Gatti, F., & Koppens, F. H. L. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.60 · Cited by 2,315
Multifunctional wearable devices for diagnosis and therapy of movement disorders
Son, D., Lee, J., Qiao, S., Ghaffari, R., Kim, J., Lee, J. E., Song, C., Kim, S. J., Lee, D. J., Jun, S. W., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.38 · Cited by 1,462
Atomristor: Nonvolatile Resistance Switching in Atomic Sheets of Transition Metal Dichalcogenides
Ge, R., Wu, X., Kim, M., Shi, J., Sonde, S., Tao, L., Zhang, Y., Lee, J. C., & Akinwande, D. (2018) · Nano Letters · doi:10.1021/acs.nanolett.7b04342 · Cited by 586
Wang, J., Yao, Q., Huang, C., Zou, X., Liao, L., Chen, S., Fan, Z., Zhang, K., Wu, W., Xiao, X., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602757 · Cited by 548
Self-citationMultifunctional high-performance van der Waals heterostructures
Huang, M., Li, S., Zhang, Z., Xiong, X., Li, X., & Wu, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.208 · Cited by 389
Efficient electrical control of thin-film black phosphorus bandgap
Deng, B., Tran, V., Xie, Y., Jiang, H., Li, C., Guo, Q., Wang, X., Tian, H., Koester, S. J., Wang, H., et al. (2017) · Nature Communications · doi:10.1038/ncomms14474 · Cited by 347
Interface Engineering for High‐Performance Top‐Gated MoS2 Field‐Effect Transistors
Zou, X., Wang, J., Chiu, C., Wu, Y., Xiao, X., Jiang, C., Wu, W., Mai, L., Chen, T., Li, J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201402008 · Cited by 336
Self-citationLearning of spatiotemporal patterns in a spiking neural network with resistive switching synapses
Wang, W., Pedretti, G., Milo, V., Carboni, R., Calderoni, A., Ramaswamy, N., Spinelli, A. S., & Ielmini, D. (2018) · Science Advances · doi:10.1126/sciadv.aat4752 · Cited by 269
Zhao, X., Ma, J., Xiao, X., Liu, Q., Shao, L., Chen, D., Liu, S., Niu, J., Zhang, X., Wang, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705193 · Cited by 253
Self-citationSilicon Oxide (SiOx): A Promising Material for Resistance Switching?
Mehonic, A., Shluger, A. L., Gao, D., Valov, I., Miranda, E., Ielmini, D., Bricalli, A., Ambrosi, E., Li, C., Yang, J. J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201801187 · Cited by 213
Han, S., Hu, L., Wang, X., Zhou, Y., Zeng, Y., Ruan, S., Pan, C., & Peng, Z. (2017) · Advanced Science · doi:10.1002/advs.201600435 · Cited by 204
Hao, C., Wen, F., Xiang, J., Yuan, S., Yang, B., Li, L., Wang, W., Zeng, Z., Wang, L., Liu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504187 · Cited by 189
Vu, Q. A., Kim, H., Nguyen, V. L., Won, U. Y., Adhikari, S., Kim, K., Lee, Y. H., & Yu, W. J. (2017) · Advanced Materials · doi:10.1002/adma.201703363 · Cited by 182
Resistive random-access memory based on ratioed memristors
Lastras-Montaño, M. Á., & Cheng, K.-T. T. (2018) · Nature Electronics · doi:10.1038/s41928-018-0115-z · Cited by 113
Park, W. I., Yoon, J. M., Park, M., Lee, J., Kim, S. K., Jeong, J. W., Kim, K., Jeong, H. Y., Jeon, S., No, K. S., et al. (2012) · Nano Letters · doi:10.1021/nl203597d · Cited by 96
Nonvolatile reconfigurable sequential logic in a HfO 2 resistive random access memory array
Zhou, Y., Li, Y., Su, Y., Wang, Z., Shih, L.-Y., Chang, T., Chang, K., Long, S., Sze, S. M., & Miao, X. (2017) · Nanoscale · doi:10.1039/c7nr00934h · Cited by 67
Sowinska, M., Bertaud, T., Walczyk, D., Thieß, S., Calka, P., Alff, L., Walczyk, C., & Schroeder, T. A. (2014) · Journal of Applied Physics · doi:10.1063/1.4879678 · Cited by 54
Realizing Long-Term Stability and Thickness Control of Black Phosphorus by Ambient Thermal Treatment
Jeong, M.-H., Kwak, D., Ra, H., Lee, A., & Lee, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04627 · Cited by 41
Improvement of Device Reliability by Introducing a BEOL-Compatible TiN Barrier Layer in CBRAM
Cao, R., Liu, S., Liu, Q., Zhao, X.-L., Wang, W., Zhang, X.-M., Wu, F., Wu, Q., Wang, Y., Lv, H., et al. (2017) · IEEE Electron Device Letters · doi:10.1109/led.2017.2746738 · Cited by 32
Self-citationAtomically Thin CBRAM Enabled by 2-D Materials: Scaling Behaviors and Performance Limits
Dong, Z., Zhao, H., DiMarzio, D., Han, M., Zhang, L., Tice, J. B., Wang, H., & Guo, J. H. (2018) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2018.2830328 · Cited by 25
Zhao, L., Jiang, Z., Chen, H.-Y., Sohn, J., Okabe, K. L., Magyari‐Köpe, B., Wong, H. ‐. P., & Nishi, Y. (2014) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2014.7046998 · Cited by 24
Chen, K.-H., Chang, K., Chang, T., Tsai, T., Liao, K.-H., Syu, Y.-E., & Sze, S. M. (2016) · Applied Physics A · doi:10.1007/s00339-016-9768-5 · Cited by 20
Bertaud, T., Walczyk, D., Sowinska, M., Wolansky, D., Tillack, B., Schoof, G., Stikanov, V., Wenger, C., Thieß, S., Schroeder, T. A., et al. (2013) · ECS Transactions · doi:10.1149/05004.0021ecst · Cited by 15
Author Correction: Robust memristors based on layered two-dimensional materials
Wang, M., Cai, S., Pan, C., Wang, C., Lian, X., Zhuo, Y., Xu, K., Cao, T., Pan, X. Q., Wang, B., et al. (2018) · Nature Electronics · doi:10.1038/s41928-018-0044-x · Cited by 10
Cited by
Hardware implementation of memristor-based artificial neural networks
Aguirre, F., Sebastian, A., Le Gallo, M., Song, W., Wang, T., Yang, J. J., Lu, W., Chang, M.-F., Ielmini, D., Yang, Y., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45670-9 · Cited by 564
“Crossbar arrays of two-terminal metal/insulator/metal (MIM) memristive devices can be fabricated easily using standard lithography and deposition techniques; this has been readily achieved by multiple groups 57,64,68 – 70 ,85 ,93, The crossbar (block 5 in Fig.”
Two-dimensional devices and integration towards the silicon lines
Wang, S., Liu, X., Xu, M., Liu, L., Yang, D., & Zhou, P. (2022) · Nature Materials · doi:10.1038/s41563-022-01383-2 · Cited by 332
Self-citationThe development of integrated circuits based on two-dimensional materials
Zhu, K., Wen, C., Aljarb, A. A., Xue, F., Xu, X., Tung, V., Zhang, X., Alshareef, H. N., & Lanza, M. (2021) · Nature Electronics · doi:10.1038/s41928-021-00672-z · Cited by 327
Standards for the Characterization of Endurance in Resistive Switching Devices
Lanza, M., Waser, R., Ielmini, D., Yang, J. J., Goux, L., Suñe, J., Kenyon, A. J., Mehonic, A., Spiga, S., Rana, V., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c06980 · Cited by 262
The Roadmap of 2D Materials and Devices Toward Chips
Liu, A., Zhang, X., Liu, Z., Li, Y., Peng, X., Li, X., Qin, Y., Hu, C., Qiu, Y., Jiang, H., et al. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01273-5 · Cited by 255
Self-citation
Metadata
- Authors
- Wang, Y., Wu, F., Liu, X., Lin, J., Chen, J.-Y., Wu, W.-W., Wei, J., Liu, Y., Liu, Q., & Liao, L.
- Affiliations
- Hunan University (CN)
- Chinese Academy of Sciences (CN)
- National Yang Ming Chiao Tung University (TW)
- Corresponding author
- Liu, Xingqiang
- Liu, Qi
- Liao, Lei
- ORCID
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2019-11-04
- Volume
- 115
- Issue
- 19
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2984954723
- Cited by
- 72
- References
- 24
- Citations by year
- 2026: 9 · 2025: 12 · 2024: 11 · 2023: 15 · 2022: 14 · 2021: 9 · 2020: 2
- FWCI
- 2.24
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Applied Physics Letters (publishedVersion)
- Funders
- National Key Research and Development Program of Ministry of Science and Technology (2018YFB0406603, 2018YFA0703704)
- Strategic Priority Research Program of Chinese Academy of Sciences (XDB30000000, XDPB12)
- Natural Science Foundation of Hunan Province (2017RS3021, 2017JJ3033)
- National Natural Science Foundation of China (61574101, 61704152, 51872084, 617040502, 61825404, U1632156, 61851403)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- black phosphorus, memristors, on/off current ratio, phosphorus oxides, two-dimensional materials, leakage current, data retention, logic gates, flexible electronics, neural network simulation, supervised learning, online learning
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.