Initiation of shape-memory effect by inductive heating of magnetic nanoparticles in thermoplastic polymers
Open accessThe DOI matches its Crossref record; 33 of the 34 references it cites were found in a registry or an index.
Abstract
In shape-memory polymers, changes in shape are mostly induced by heating, and exceeding a specific switching temperature, T switch . If polymers cannot be warmed up by heat transfer using a hot liquid or gaseous medium, noncontact triggering will be required. In this article, the magnetically induced shape-memory effect of composites from magnetic nanoparticles and thermoplastic shape-memory polymers is introduced. A polyetherurethane (TFX) and a biodegradable multiblock copolymer (PDC) with poly( p -dioxanone) as hard segment and poly(ε-caprolactone) as soft segment were investigated as matrix component. Nanoparticles consisting of an iron(III)oxide core in a silica matrix could be processed into both polymers. A homogeneous particle distribution in TFX could be shown. Compounds have suitable elastic and thermal properties for the shape-memory functionalization. Temporary shapes of TFX compounds were obtained by elongating at increased temperature and subsequent cooling under constant stress. Cold-drawing of PDC compounds at 25°C resulted in temporary fixation of the mechanical deformation by 50–60%. The shape-memory effect of both composite systems could be induced by inductive heating in an alternating magnetic field ( f = 258 kHz; H = 30 kA·m −1 ). The maximum temperatures achievable by inductive heating in a specific magnetic field depend on sample geometry and nanoparticle content. Shape recovery rates of composites resulting from magnetic triggering are comparable to those obtained by increasing the environmental temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Moreover, thermo-responsive SMPs can also be stimulated by indirect heating methods such as electricity, magnetism, light, and radiation (radio or microwave).25−27”
From Shape-Memory Polymer Nanocomposites of Poly(ε-caprolactone) with the Polystyrene-block-polybutadiene-block-polystyrene-tri-block Copolymer Encapsulated with Metal Oxides (2021) · cites this paper as [25]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“In addition, SMPs can be thermally-triggered by indirect heating via Joule effect (e.g., PURs enriched with carbon nanotubes) [41,42], infra-red (IR) irradiation (e.g., cellulose nanocrystals filled thermoplastics elastomers) [43] or magnetically actuated nanocomposites [44-46].”
From Shape-memory polymers for multiple applications in the materials world (2016) · cites this paper as [46]
The cited source says what the claim attributes to it.
In the citing paper
“The incorporation of silica-coated magnetic nanoparticles of iron(III)oxide core into Tecoflex ® enabled the remote actuation of the thermally induced SME in alternating magnetic fields [19].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [19]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications
Gupta, A. K., & Gupta, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.012 · Cited by 6,771
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Self-citationIron oxides in the laboratory: preparation and characterization
(1992) · Choice Reviews Online · doi:10.5860/choice.29-2718 · Cited by 2,259
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Self-citationLight-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Self-citationKoerner, H., Price, G., Pearce, N. A., Alexander, M., & Vaia, R. A. (2004) · Nature Materials · doi:10.1038/nmat1059 · Cited by 1,034
Polyurethanes having shape memory effects
Kim, B. K., Lee, S. Y., & Xu, M. (1996) · Polymer · doi:10.1016/s0032-3861(96)00442-9 · Cited by 693
Physical limits of hyperthermia using magnetite fine particles
Hergt, R., Andra, W., d'Ambly, C. G., Hilger, I., Kaiser, W. A., Richter, U., & Schmidt, H.-G. (1998) · IEEE Transactions on Magnetics · doi:10.1109/20.718537 · Cited by 658
Electroactive shape-memory polyurethane composites incorporating carbon nanotubes
Cho, J. W., Kim, J. W., Jung, Y. C., & Goo, N. S. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200400492 · Cited by 603
Size dependence of specific power absorption of Fe3O4 particles in AC magnetic field
Ma, M., Wu, Y., Zhou, J., Sun, Y., Zhang, Y., & Gu, N. (2004) · Journal of Magnetism and Magnetic Materials · doi:10.1016/s0304-8853(03)00426-8 · Cited by 497
Research works printed but not linked: 3
- Lendlein, A. & Kelch, S. (2002) Angew. Chem. Int. Ed. 41, 2034-2057. · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
- Lendlein, A. & Kelch, S. (2005) Clin. Hemorheol. Microcirc. 32, 105-116.
- Hu, J., Ding, X., Tao, X. & Yu, J. (2002) J. Dong Hua Univ. (Engl. Ed.) 19, 3.
Cited by
Items 801–827 of 827
Thrombus Removal with Magnetically Actuated Micro-TransformersPreprint
Wei, F., Zhan, S., Yao, L., & Deng, Q. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5249689
Khan, U. A., Kesarwani, N., Singh, S. K., & Srivastava, A. (2025) · Springer Proceedings in Materials · doi:10.1007/978-981-96-5166-5_23
Bandyopadhyay, A., Dasgupta, P., & Basak, S. (2025) · De Gruyter eBooks · doi:10.1515/9783111583716-001
Shape-memory smart biocomposites
Bakri, M. K. B., & Rahman, M. R. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-33643-0.00010-7
Bhalerao, S. M. J. R. P., & Waghmare, Y. B. G. A. M. (2026) · International Journal of Advanced Research in Science Communication and Technology · doi:10.48175/ijarsct-30667
Nasri, M., Khaterchi, H., Nasri, M. T., Larbi, B., Boulila, A., Zghal, A., & Hajlaoui, K. (2026) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2025-0238
Lin, K., Terentjev, A., Bonifacio, A., Piantanida, E., Terentjev, E. M., & Saed, M. O. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c04412
Introduction of Nanostructure into Shape Memory Polymers from Materials to Applications
Gupta, R., Mittal, G., Singh, S., Chaudhary, V., & Kumar, K. (2026) · Engineering materials · doi:10.1007/978-981-95-3581-1_4
Single-material 4D-printed shape-morphing structures via spatially patterned strain trappingPreprint
Iqbal, S. M. A., Zhang, H., Yang, L., Luo, A., Paulsen, J. D., & Henderson, J. H. (2026) · arXiv (Cornell University) · doi:10.48550/arxiv.2603.27152
Jannot, M. (2018) · theses.fr (ABES) · doi:10.70675/91bd6288za3e5z469bz9da1zfca5055cdaf8 · Cited by 1
Impression 4D de polymères pour la Santé (SantePolym4D)
Mastalerz, C. (2021) · theses.fr (ABES) · doi:10.70675/444db486z7e3cz4ed5z999dz00fb6de8781a · Cited by 1
Study of the Electro-Thermo-Mechanical Behaviour of a 4D Printed Actuator
Roumy, L. (2024) · theses.fr (ABES) · doi:10.70675/095cfad1zcd22z4489zb533z93381e7ea4a7 · Cited by 2
Gunasekaran, D., & Andrawes, B. O. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6655280
A Programmable Bilayer Shape Memory Polymer Composite for Soft Bending Actuators
He, Y., & Wang, J. (2026) · Mechanisms and machine science · doi:10.1007/978-3-032-11165-4_11
Omosa, G. B., Fredrick, M., Jen, T.-C., & Akinlabi, T. E. (2025) · IEEE Connecting the Unconnected Europe, Middle East, and Africa Regional Summit (CTUS-EMEA) · doi:10.1109/ctus-emea68989.2025.11589574
“Magnetic-active SMPCs employ ferromagnetic fillers, including iron (Fe) and magnetite (Fe₃O₄), enabling actuation through localized heating or torque under magnetic fields [12].”
Karunakaran, S. (2024) · Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia)
Yeshiwas, T. A., Siyoum, Y. B., Tiruneh, A. B., Alehegn, Y. L., Nega, A. Y., & Sisay, M. A. (2026) · Results in Materials · doi:10.1016/j.rinma.2026.101010 · Cited by 1
Magneto‐responsive fibers and fabrics for soft systems
Zhu, H., Cui, J., Fan, Q., ZHANG, Z., Jiang, C., Tam, H., Zhao, Y. J., Wang, Z., & Wang, Z. (2026) · FlexMat. · doi:10.1002/flm2.70120 · Cited by 1
Sun, C. H., Yun, M., Suh, D. W., & Song, Y. S. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.71436
Multifunctional Magnetic Soft Fibers: A Platform for Wearable, Biomedical, and Soft Robotic Systems
Ali, S. R., Rahman, M., & Ordu, M. (2026) · Advanced Fiber Materials · doi:10.1007/s42765-026-00773-4
Lee, K. (2026) · Polymers · doi:10.3390/polym18182250
“Composite strategies have further extended functionality; examples include fast self-expandable biodegradable stents [24], stimuli-responsive SMP composites surveyed in dedicated reviews [25,26], and remote actuation by inductive heating of embedded magnetic nanoparticles [6].”
InfluentialSon, C. (2023) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign)
Functional shape memory polymers and composites: from material design to applications
Jingxuan, L., Yan, S., Lan, L., Jing, C., Wang, L., & Jinsong, L. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.117396
Linkun, J. I. A., Yang, Q., Xue, Y., Anyi, X. I. A., Zhou, X., & Guiqin, Y. A. N. G. (2026) · Frontiers of Materials Science · doi:10.1007/s11706-026-0785-9
Recycled cellulose material in 3D/4D printing
Yadav, A., Chauhan, D., Talreja, N., Khan, S., Srituravanich, W., & Ashfaq, M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-43816-5.00003-2
Cârstea, A.-E., Ciocan, L. T., Barbosa, J. M., Hirata, R., & Imre, M. M. (2026) · Polymers · doi:10.3390/polym18222832
Polymery s tvarovou pamětí a jejich kompozity
Strouhalová, J. (2013)
Metadata
- Authors
- Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A.
- Affiliations
- *Institute of Polymer Research, GKSS Research Centre Geesthacht, 14513 Teltow, Germany; and
- DKI, German Institute for Polymers, 64289 Darmstadt, Germany
- Venue
- Proceedings of the National Academy of Sciences
- Publisher
- National Academy of Sciences
- Published
- 2006-02-28
- Volume
- 103
- Issue
- 10
- Pages
- 3540-3545
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- PMC
- PMC1383650
- OpenAlex
- W2130189877
- Cited by
- 819
- References
- 34
- Citations by year
- 2026: 18 · 2025: 29 · 2024: 33 · 2023: 18 · 2022: 40 · 2021: 52 · 2020: 40 · 2019: 51 · 2018: 40 · 2017: 48 · 2016: 47 · 2015: 48 · 2014: 49 · 2013: 60 · 2012: 55
- FWCI
- 30.36
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Proceedings of the National Academy of Sciences (publishedVersion)
- Europe PMC (PubMed Central) (publishedVersion)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations
- Keywords
- shape memory polymers, magnetic nanoparticles, induction heating, thermoplastics, polyether polyurethane, poly(p-dioxanone), polycaprolactone, iron oxide nanoparticles, silica-coated nanoparticles, cold drawing, shape recovery, polymer composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.