Initiation of shape-memory effect by inductive heating of magnetic nanoparticles in thermoplastic polymers
Open accessThe DOI matches its Crossref record; 33 of the 34 references it cites were found in a registry or an index.
Abstract
In shape-memory polymers, changes in shape are mostly induced by heating, and exceeding a specific switching temperature, T switch . If polymers cannot be warmed up by heat transfer using a hot liquid or gaseous medium, noncontact triggering will be required. In this article, the magnetically induced shape-memory effect of composites from magnetic nanoparticles and thermoplastic shape-memory polymers is introduced. A polyetherurethane (TFX) and a biodegradable multiblock copolymer (PDC) with poly( p -dioxanone) as hard segment and poly(ε-caprolactone) as soft segment were investigated as matrix component. Nanoparticles consisting of an iron(III)oxide core in a silica matrix could be processed into both polymers. A homogeneous particle distribution in TFX could be shown. Compounds have suitable elastic and thermal properties for the shape-memory functionalization. Temporary shapes of TFX compounds were obtained by elongating at increased temperature and subsequent cooling under constant stress. Cold-drawing of PDC compounds at 25°C resulted in temporary fixation of the mechanical deformation by 50–60%. The shape-memory effect of both composite systems could be induced by inductive heating in an alternating magnetic field ( f = 258 kHz; H = 30 kA·m −1 ). The maximum temperatures achievable by inductive heating in a specific magnetic field depend on sample geometry and nanoparticle content. Shape recovery rates of composites resulting from magnetic triggering are comparable to those obtained by increasing the environmental temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Moreover, thermo-responsive SMPs can also be stimulated by indirect heating methods such as electricity, magnetism, light, and radiation (radio or microwave).25−27”
From Shape-Memory Polymer Nanocomposites of Poly(ε-caprolactone) with the Polystyrene-block-polybutadiene-block-polystyrene-tri-block Copolymer Encapsulated with Metal Oxides (2021) · cites this paper as [25]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“In addition, SMPs can be thermally-triggered by indirect heating via Joule effect (e.g., PURs enriched with carbon nanotubes) [41,42], infra-red (IR) irradiation (e.g., cellulose nanocrystals filled thermoplastics elastomers) [43] or magnetically actuated nanocomposites [44-46].”
From Shape-memory polymers for multiple applications in the materials world (2016) · cites this paper as [46]
The cited source says what the claim attributes to it.
In the citing paper
“The incorporation of silica-coated magnetic nanoparticles of iron(III)oxide core into Tecoflex ® enabled the remote actuation of the thermally induced SME in alternating magnetic fields [19].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [19]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications
Gupta, A. K., & Gupta, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.012 · Cited by 6,771
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Self-citationIron oxides in the laboratory: preparation and characterization
(1992) · Choice Reviews Online · doi:10.5860/choice.29-2718 · Cited by 2,259
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Self-citationLight-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Self-citationKoerner, H., Price, G., Pearce, N. A., Alexander, M., & Vaia, R. A. (2004) · Nature Materials · doi:10.1038/nmat1059 · Cited by 1,034
Polyurethanes having shape memory effects
Kim, B. K., Lee, S. Y., & Xu, M. (1996) · Polymer · doi:10.1016/s0032-3861(96)00442-9 · Cited by 693
Physical limits of hyperthermia using magnetite fine particles
Hergt, R., Andra, W., d'Ambly, C. G., Hilger, I., Kaiser, W. A., Richter, U., & Schmidt, H.-G. (1998) · IEEE Transactions on Magnetics · doi:10.1109/20.718537 · Cited by 658
Electroactive shape-memory polyurethane composites incorporating carbon nanotubes
Cho, J. W., Kim, J. W., Jung, Y. C., & Goo, N. S. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200400492 · Cited by 603
Size dependence of specific power absorption of Fe3O4 particles in AC magnetic field
Ma, M., Wu, Y., Zhou, J., Sun, Y., Zhang, Y., & Gu, N. (2004) · Journal of Magnetism and Magnetic Materials · doi:10.1016/s0304-8853(03)00426-8 · Cited by 497
Research works printed but not linked: 3
- Lendlein, A. & Kelch, S. (2002) Angew. Chem. Int. Ed. 41, 2034-2057. · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
- Lendlein, A. & Kelch, S. (2005) Clin. Hemorheol. Microcirc. 32, 105-116.
- Hu, J., Ding, X., Tao, X. & Yu, J. (2002) J. Dong Hua Univ. (Engl. Ed.) 19, 3.
Cited by
Items 401–500 of 827
Castillo-Cruz, O., Avilés, F., Vargas‐Coronado, R. F., Cauich‐Rodríguez, J. V., Chan‐Chan, L. H., Sessini, V., & Peponi, L. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.04.073 · Cited by 33
Zhao, F., Rong, W., Wang, L., & Sun, L. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c02986 · Cited by 33
Yu, K., Ge, Q., & Qi, H. J. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.050 · Cited by 33
Temporary shape development in shape memory nanocomposites using magnetic force
Golbang, A., & Kokabi, M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.06.008 · Cited by 34
Thermally driven microfluidic pumping via reversible shape memory polymers
Robertson, J. M., Rodriguez, R., Holmes, L. R., Mather, P. T., & Wetzel, E. D. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/8/085043 · Cited by 32
Park, H. J., Kim, M., Lee, J., & Kwak, M. K. (2024) · Advanced Science · doi:10.1002/advs.202309393 · Cited by 31
Modified shape memory epoxy resin composites by blending activity polyurethane
Liu, Y., Sun, H., Tan, H., & Du, X. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37688 · Cited by 31
Durability of shape memory polymer based syntactic foam under accelerated hydrolytic ageing
Xu, T., & Li, G. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.06.055 · Cited by 31
Liu, N., Huang, W. M., Phee, S. J., Fan, H., & Chew, K. L. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/6/n01 · Cited by 31
Effect of nanoclay on morphological, thermal, and barrier properties of albumin bovine
Dash, S., Kisku, S. K., & Swain, S. K. (2012) · Polymer Composites · doi:10.1002/pc.22363 · Cited by 31
Self-Healing of Core–Shell Magnetic Polystyrene Nanocomposites
Yoonessi, M., Lerch, B. A., Peck, J. A., Rogers, R. B., Solá-Lopez, F. J., & Meador, M. A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04314 · Cited by 32
Shape memory induced structural evolution of high performance copolyimides
Yang, Z., Song, F., Wang, Q., & Wang, T. (2016) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28356 · Cited by 31
Mariani, A., & Malucelli, G. (2023) · Energies · doi:10.3390/en16114535 · Cited by 31
Water-Enhanced and Remote Self-Healing Elastomers in Various Harsh Environments
Zhao, P., Cao, M., Liu, C., Dai, Y., Tan, Y., Ji, S., & Xu, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c05570 · Cited by 30
Developments in Shape Memory Polymeric Materials
Anis, A., Faiz, S., Luqman, M., Poulose, A. M., Gulrez, S. K. H., Shaikh, H., & Al-Zahrani, S. M. (2013) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2013.824466 · Cited by 31
“The idea was implemented by the introduction of magnetically responsive fillers such as Fe3O4 [79], Fe2O3=silica [80], terfenol-D particles[81] in SMP matrices.”
MethodDesign strategies for shape memory polymers
Luo, X., & Mather, P. T. (2012) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2012.10.006 · Cited by 31
Guo, L., Fei, G., Liu, B., Xia, H., & Zhao, Y. (2014) · RSC Advances · doi:10.1039/c4ra04586f · Cited by 33
Revealing the morphological architecture of a shape memory polyurethane by simulation
Hu, J., Zhang, C., Ji, F., Li, X., Han, J., & Wu, Y. S. (2016) · Scientific Reports · doi:10.1038/srep29180 · Cited by 31
Recent Progress in Smart Polymers: Behavior, Mechanistic Understanding and Application
Chakraborty, D. D., Nath, L. K., & Chakraborty, P. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2017.1364383 · Cited by 31
“ation of easily hydrolysable ester bonds with the drawback of nonlinear erosion.([62])”
BackgroundLoeblein, M., Bolker, A., Ngoh, Z. L., Li, L., Wallach, E. R., Tsang, S. H., Pawlik, M., Verker, R., Atar, N., Gouzman, I., et al. (2018) · Carbon · doi:10.1016/j.carbon.2018.07.018 · Cited by 30
Zhang, T., Wen, Z., Yan, H., Yang, M., Yang, K., Zhou, Q., & Wang, Y. (2015) · Polymer Chemistry · doi:10.1039/c5py00507h · Cited by 30
A coil system for real-time magnetic fluid hyperthermia microscopy studies
Subramanian, M., Miaskowski, A., Pearce, G., & Dobson, J. (2015) · International Journal of Hyperthermia · doi:10.3109/02656736.2015.1104732 · Cited by 30
“used for research on AMF-triggered drug release using thermolabile MNPs and conjugated drugs [12,13], triggered thermal activation of shape memory polymers embedded with MNPs for biomedical applications [14,15], and AMF-mediated biofilm inactivation using iron oxide nanoparticles [16].”
MethodLu, H., Wang, X., Yu, K., Huang, W., Yao, Y., & Leng, J. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa77b3 · Cited by 31
Study of machinability aspects of shape memory alloys: A critical review
Kumari, S., Bandhu, D., & Abhishek, K. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.11.390 · Cited by 29
Idumah, C. I. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26331 · Cited by 29
Razzaq, M. Y., Behl, M., Kratz, K. L., & Lendlein, A. (2013) · Advanced Materials · doi:10.1002/adma.201301521 · Cited by 29
Self-citationA new shape memory epoxy resin with excellent comprehensive properties
Wu, X., Yang, X. M., Zhang, Y., & Huang, W. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9634-4 · Cited by 31
A validated model for induction heating of shape memory alloy actuators
Saunders, R. N., Boyd, J. G., Hartl, D. J., Brown, J. K., Calkins, F. T., & Lagoudas, D. C. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/4/045022 · Cited by 32
Gupta, R. K., Hashmi, S. A. R., Verma, S., Naik, A., & Nair, P. (2020) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-020-04568-5 · Cited by 30
Hu, S., Kuo, K., Tung, W., Liu, D., & Chen, S. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900465 · Cited by 29
Biodegradable shape memory nanocomposites with thermal and magnetic field responsiveness
Zhang, X., Lu, X., Wang, Z., Wang, J., & Sun, Z. (2013) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2012.735098 · Cited by 28
“[10] reported in biodegradable multiblock copolymer with poly(p-dioxanone) and poly(ɛ-caprolactone) reinforced with 10wt% magnetite particles that the magnetic-field-induced shape recovery ratio was similar to the thermal induced shape recovery ratio.”
BackgroundResultWu, W., Guttmann, M., Schneider, M., Thelen, R., Worgull, M., Gomard, G., & Hölscher, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009611 · Cited by 30
Functional flexibility: The potential of morphing composites
Jones, M. P., Murali, G. G., Laurin, F., Robinson, P., & Bismarck, A. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109792 · Cited by 29
Micalizzi, S., Lantada, A. D., & Maria, C. D. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab3b35 · Cited by 28
Electro-Textile Interfaces : Textile-Based Sensors and Actuators
Jeong, K., & Yoo, S. K. (2009) · Cited by 27
A Shape‐Memory DNA‐Based Hydrogel Exhibiting Two Internal Memories
Hu, Y., Guo, W., Kahn, J. S., Aleman‐Garcia, M. A., & Willner, I. (2016) · Angewandte Chemie · doi:10.1002/ange.201511201 · Cited by 27
Lu, H., Yin, W., Huang, W., & Leng, J. (2013) · RSC Advances · doi:10.1039/c3ra42704h · Cited by 27
Heuchel, M., Razzaq, M. Y., Kratz, K. L., Behl, M., & Lendlein, A. (2015) · Polymer · doi:10.1016/j.polymer.2015.03.063 · Cited by 28
Self-citationThe mechanics of hydrogel crawlers in confined environment
Vernerey, F. J., & Shen, T. (2017) · Journal of The Royal Society Interface · doi:10.1098/rsif.2017.0242 · Cited by 27
Gorbunova, М. А., Anokhin, D. V., & Badamshina, E. R. (2020) · Polymer Science Series B · doi:10.1134/s1560090420050073 · Cited by 27
Magnetic Field‐Directed Self‐Assembly of Magnetic Nanoparticle Chains in Bulk Polymers
Krommenhoek, P. J., & Tracy, J. B. (2013) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201300101 · Cited by 33
He, M., Xiao, W., Xie, H. Q., Fan, C., Du, L., Deng, X., Yang, K., & Wang, Y. (2016) · Materials Chemistry Frontiers · doi:10.1039/c6qm00047a · Cited by 26
Omnidirectional 3D Nanoplasmonic Optical Antenna Array via Soft-Matter Transformation
Ross, B. M., Wu, L. Y., & Lee, L. P. (2011) · Nano Letters · doi:10.1021/nl201516g · Cited by 26
Bio-Based Epoxy Shape-Memory Thermosets from Triglycidyl Phloroglucinol
Santiago, D., Guzmán, D. J., Ferrando, F., Serra, À., & la Flor, S. D. (2020) · Polymers · doi:10.3390/polym12030542 · Cited by 27
Xia, S., Li, X., Wang, Y., Pan, Y., Zheng, Z., Ding, X., & Peng, Y. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/8/085005 · Cited by 25
A magnetic solder for assembling bulk covalent adaptable network blocks
Zhang, S., Zhang, Y., Wu, Y., Yang, Y., Chen, Q., Liang, H., Wei, Y., & Ji, Y. (2020) · Chemical Science · doi:10.1039/d0sc01678k · Cited by 26
Laser-Induced Remote Healing of Stretchable Diselenide-Containing Conductive Composites
Zhao, P., Xia, J., Liu, J., Tan, Y., Ji, S., & Xu, H. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c15855 · Cited by 25
Wang, Y., Li, X., Pan, Y. M., Zheng, Z., Ding, X., & Peng, Y. (2014) · RSC Advances · doi:10.1039/c4ra00165f · Cited by 25
Ji, G., & Li, G. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.04.020 · Cited by 26
Lee, W. L., & Low, H. Y. (2016) · Scientific Reports · doi:10.1038/srep23686 · Cited by 27
“At temperature above T trans , the soft segments are in a highly mobile and flexible rubbery state with a reported Young’s modulus of 7 MPa at 80 °C 12 .”
InfluentialElastic chitosan/chondroitin sulfate multilayer membranes
Sousa, M. P., Cleymand, F., & Mano, J. F. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/3/035008 · Cited by 27
Reprocessable and Multiple Shape Memory Thermosets with Reconfigurability
Wang, Y., Pan, Y. M., Zheng, Z., & Ding, X. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900001 · Cited by 25
Recent advances for phase-transition materials for actuators
Ma, H., Xiao, X., Zhang, X., & Liu, K. (2020) · Journal of Applied Physics · doi:10.1063/5.0020596 · Cited by 26
Kim, M. J., Jang, S., Choi, S. W., Yang, J., Kim, J., & Choi, D. Y. (2021) · Micromachines · doi:10.3390/mi12091107 · Cited by 26
Biodegradable thermoset shape‐memory polymer developed from poly(β‐amino ester) networks
Lakhera, N., Laursen, C., Safranski, D. L., & Frick, C. P. (2012) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23059 · Cited by 25
Schmidt, C., Chowdhury, A. M. S., Neuking, K., & Eggeler, G. (2011) · High Performance Polymers · doi:10.1177/0954008311405245 · Cited by 29
Classification of Shape-Memory Polymers, Polymer Blends, and Composites
Strzelec, K., Sienkiewicz, N., & Szmechtyk, T. (2019) · Advanced structured materials · doi:10.1007/978-981-13-8574-2_2 · Cited by 28
Reversible plasticity shape memory polymers: Key factors and applications
Zhang, X., Tang, Z., & Guo, B. (2015) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23916 · Cited by 25
Petryk, N. M., Thai, N. L. B., Saldanha, L. V., Sutherland, S. T., & Monroe, M. B. B. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c02532 · Cited by 24
Dynamic behaviors of rigid shaft-flexible SMPSA coupling system
Hu, W., Yan, X., Song, Z., Yan, J., Zhang, C., & Deng, Z. (2026) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2026.119849 · Cited by 23
Multi-material 3D printing-enabled multilayers for smart actuation via magnetic and thermal stimuli
Ravichandran, D., Ahmed, R. J., Banerjee, R., Ilami, M., Marvi, H., Miquelard‐Garnier, G., Golan, Y., & Song, K. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc01109c · Cited by 23
Fluid-driven and smart material-driven research for soft body robots
Xu, S., Zhang, S., Lei, R., Liu, Y., Bu, W., Wei, X., & Zhang, Z. (2023) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2023.09.002 · Cited by 24
Wang, Y., Li, J., Li, X., Pan, Y. M., Zheng, Z., Ding, X., & Peng, Y. (2014) · RSC Advances · doi:10.1039/c4ra02600d · Cited by 23
Photocurable Polymer Nanocomposites for Magnetic, Optical, and Biological Applications
Song, S. W., Jeong, Y., & Kwon, S. (2015) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2014.2381491 · Cited by 23
Shape Memory Polymer-Based Sealant for a Compression Sealed Joint
Li, G., Ji, G., & Meng, H. (2014) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001150 · Cited by 24
Sun, H., Liu, Y., Tan, H., & Du, X. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39882 · Cited by 23
Shape memory polymers with enhanced visibility for magnetic resonance- and X-ray imaging modalities
Weems, A. C., Szafron, J. M., Easley, A. D., Herting, S. M., Smolen, J. A., & Maitland, D. J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.045 · Cited by 24
PVDF-based shape memory polymers
Eken, G. A., & Acar, M. H. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.040 · Cited by 23
Wang, J., Kunkel, R., Luo, J., Li, Y., Liu, H., Bohnstedt, B. N., Liu, Y., & Lee, C. (2019) · Polymers · doi:10.3390/polym11040631 · Cited by 23
Wang, X., Jian, W., Lu, H., Lau, D., & Fu, Y. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00992 · Cited by 23
Zhan, Y., Li, W., Amirfazli, A., & Yu, S. (2022) · Polymer · doi:10.1016/j.polymer.2022.125193 · Cited by 23
Overview of crack self-healing
Li, G., & Meng, H. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-280-8.00001-7 · Cited by 24
Zhang, J., Wu, G., Huang, C., Niu, Y., Chen, C., Chen, Z., Yang, K., & Wang, Y. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp211953q · Cited by 22
Jose, S., George, J. J., Siengchin, S., & Parameswaranpillai, J. (2019) · Advanced structured materials · doi:10.1007/978-981-13-8574-2_1 · Cited by 25
Reconfigurable mesostructures with prestressing, reverse stiffness and shape memory effects
Song, C. L., & Ju, J. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2019.100625 · Cited by 22
Khasraghi, S. S., Shojaei, A., Janmaleki, M., & Sundararaj, U. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110735 · Cited by 24
Yin, J., Hu, J. S., Han, Y., Chen, Y., Hu, J., Zhang, Z., Huang, S., Duan, Y., Wu, H., & Zhang, J. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109349 · Cited by 22
Uto, K., Matsushita, Y., & Ebara, M. (2023) · Polymer Chemistry · doi:10.1039/d2py01607a · Cited by 22
Microwave responsive epoxy nanocomposites reinforced by carbon nanomaterials of different dimensions
Chen, L., Liu, Y., & Leng, J. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45676 · Cited by 22
Qian, W., Song, Y., Shi, D., Dong, W., Wang, X., & Zhang, H. (2019) · Materials · doi:10.3390/ma12030496 · Cited by 22
“The external stimuli specifically include heat [1], light [2,3], electricity [4–6], magnetic field [7,8], solvent [9,10], pH [11], moisture [12–14], and the like.”
BackgroundSmart Delivery Systems with Shape Memory and Self-Folding Polymers
Erkeçoglu, S., Sezer, A. D., & Bucak, Ş. (2016) · InTech eBooks · doi:10.5772/62199 · Cited by 23
Desole, M. P., Gisario, A., & Barletta, M. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13430-0 · Cited by 23
“These materials can be activated by different types of stimuli, such as thermal ones [37, 68, 75], mechanical [23, 29, 47], luminous [24, 30], electrical [14, 60], magnetic [44, 64] or chemical [32, 90], exploiting the material shape memory effect (SME) [80, 91].”
Magnetic Field-Induced Polymerization of Molecularly Imprinted Polymers
Urraca, J. L., Cortés‐Llanos, B., Aroca, C., de la Presa, P. M., Pérez, L., & Moreno‐Bondi, M. C. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b12804 · Cited by 21
Stearic acid infused polyurethane shape memory foams
Pantoja, M., Alvarado, T., Çakmak, M., & Cavicchi, K. A. (2018) · Polymer · doi:10.1016/j.polymer.2018.08.002 · Cited by 24
Design and characterization of 3D multilayer woven reinforcements shape memory polymer composites
Goda, I., Zubair, Z., L’Hostis, G., & Dréan, J.-Y. (2020) · Journal of Composite Materials · doi:10.1177/0021998320958178 · Cited by 22
Thermoset-thermoplastic-ionic liquid ternary hybrids as novel functional polymer materials
Halawani, N., Donato, R. K., Beneš, H., Brus, J., Kobera, L., Pruvost, S., Duchet‐Rumeau, J., Gérard, J., & Livi, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.123507 · Cited by 23
Remote actuation of hydrogel nanocomposites: Heating analysis, modeling, and simulations
Satarkar, N. S., Meenach, S. A., Anderson, K. W., & Hilt, J. Z. (2011) · AIChE Journal · doi:10.1002/aic.12309 · Cited by 25
Yang, D., Gao, D., Zeng, C., Jiang, J.-S., & Xie, M. (2011) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2011.08.009 · Cited by 22
Madbouly, S. A., & Lendlein, A. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200341 · Cited by 22
Self-citationSynthesis of Novel Four Armed PE-PCL Grafted Superparamagnetic and Biocompatible Nanoparticles
Panja, S., Saha, B., Ghosh, S., & Chattopadhyay, S. (2013) · Langmuir · doi:10.1021/la401811c · Cited by 23
Re‐dispersible Anisotropic and Structured Nanoparticles: Formation and Their Subsequent Shape Change
Herrmann, C. H., Bannwarth, M. B., Landfester, K., & Crespy, D. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100644 · Cited by 20
Four-dimensional design and programming of shape-memory magnetic helical micromachines
Zhao, F., Rong, W., Li, D., Wang, L., & Sun, L. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101422 · Cited by 20
Ferreira, M. P. S., Gonçalves, A., Antunes, J. C., Bessa, J., Cunha, F., & Fangueiro, R. M. E. S. (2024) · Polymers · doi:10.3390/polym16101345 · Cited by 20
“SMPs can not only be activated by temperature [64] and light [65], but also by magnetism [66], electricity [63], moisture [67], pH value [68], and others.”
BackgroundLe, H. H., Ali, Z., Uthardt, M., Ilisch, S., & Radusch, H. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.33388 · Cited by 20
Schuh, C., Schuh, K., Lechmann, M. C., Garnier, L., & Kraft, A. (2010) · Polymers · doi:10.3390/polym2020071 · Cited by 21
“As in the case of an elastomer, elastic energy is stored within the material; however, unlike an elastomer, its release requires the application of an external trigger which is usually heat but can also be a magnetic field or light [3,4].”
BackgroundLiquid Crystalline Polymer–Co Nanorod Hybrids: Structural Analysis and Response to a Magnetic Field
Riou, O., Lonetti, B., Davidson, P., Tan, R. P., Cormary, B., Mingotaud, A., Cola, E. D., Respaud, M., Chaudret, B. N., Soulantica, K., et al. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp410050z · Cited by 21
Modeling of downstream heating in melt electrospinning of polymers
Mayadeo, N., Morikawa, K., Naraghi, M., & Green, M. J. (2017) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24394 · Cited by 20
Zubir, S. A., Saad, N. M., Harun, F. W., Ali, E. S., & Ahmad, S. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4412 · Cited by 21
Lu, H., Wang, X., Xing, Z., & Fu, Y. (2019) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ab1190 · Cited by 21
Quantitative predictions of maximum strain storage in shape memory polymers (SMP)
Hornat, C. C., Nijemeisland, M., Senardi, M., Yang, Y., Pattyn, C., van der Zwaag, S., & Urban, M. W. (2019) · Polymer · doi:10.1016/j.polymer.2019.122006 · Cited by 22
Metadata
- Authors
- Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A.
- Affiliations
- *Institute of Polymer Research, GKSS Research Centre Geesthacht, 14513 Teltow, Germany; and
- DKI, German Institute for Polymers, 64289 Darmstadt, Germany
- Venue
- Proceedings of the National Academy of Sciences
- Publisher
- National Academy of Sciences
- Published
- 2006-02-28
- Volume
- 103
- Issue
- 10
- Pages
- 3540-3545
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- PMC
- PMC1383650
- OpenAlex
- W2130189877
- Cited by
- 819
- References
- 34
- Citations by year
- 2026: 18 · 2025: 29 · 2024: 33 · 2023: 18 · 2022: 40 · 2021: 52 · 2020: 40 · 2019: 51 · 2018: 40 · 2017: 48 · 2016: 47 · 2015: 48 · 2014: 49 · 2013: 60 · 2012: 55
- FWCI
- 30.36
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Proceedings of the National Academy of Sciences (publishedVersion)
- Europe PMC (PubMed Central) (publishedVersion)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations
- Keywords
- shape memory polymers, magnetic nanoparticles, induction heating, thermoplastics, polyether polyurethane, poly(p-dioxanone), polycaprolactone, iron oxide nanoparticles, silica-coated nanoparticles, cold drawing, shape recovery, polymer composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.