Initiation of shape-memory effect by inductive heating of magnetic nanoparticles in thermoplastic polymers
Open accessThe DOI matches its Crossref record; 33 of the 34 references it cites were found in a registry or an index.
Abstract
In shape-memory polymers, changes in shape are mostly induced by heating, and exceeding a specific switching temperature, T switch . If polymers cannot be warmed up by heat transfer using a hot liquid or gaseous medium, noncontact triggering will be required. In this article, the magnetically induced shape-memory effect of composites from magnetic nanoparticles and thermoplastic shape-memory polymers is introduced. A polyetherurethane (TFX) and a biodegradable multiblock copolymer (PDC) with poly( p -dioxanone) as hard segment and poly(ε-caprolactone) as soft segment were investigated as matrix component. Nanoparticles consisting of an iron(III)oxide core in a silica matrix could be processed into both polymers. A homogeneous particle distribution in TFX could be shown. Compounds have suitable elastic and thermal properties for the shape-memory functionalization. Temporary shapes of TFX compounds were obtained by elongating at increased temperature and subsequent cooling under constant stress. Cold-drawing of PDC compounds at 25°C resulted in temporary fixation of the mechanical deformation by 50–60%. The shape-memory effect of both composite systems could be induced by inductive heating in an alternating magnetic field ( f = 258 kHz; H = 30 kA·m −1 ). The maximum temperatures achievable by inductive heating in a specific magnetic field depend on sample geometry and nanoparticle content. Shape recovery rates of composites resulting from magnetic triggering are comparable to those obtained by increasing the environmental temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Moreover, thermo-responsive SMPs can also be stimulated by indirect heating methods such as electricity, magnetism, light, and radiation (radio or microwave).25−27”
From Shape-Memory Polymer Nanocomposites of Poly(ε-caprolactone) with the Polystyrene-block-polybutadiene-block-polystyrene-tri-block Copolymer Encapsulated with Metal Oxides (2021) · cites this paper as [25]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“In addition, SMPs can be thermally-triggered by indirect heating via Joule effect (e.g., PURs enriched with carbon nanotubes) [41,42], infra-red (IR) irradiation (e.g., cellulose nanocrystals filled thermoplastics elastomers) [43] or magnetically actuated nanocomposites [44-46].”
From Shape-memory polymers for multiple applications in the materials world (2016) · cites this paper as [46]
The cited source says what the claim attributes to it.
In the citing paper
“The incorporation of silica-coated magnetic nanoparticles of iron(III)oxide core into Tecoflex ® enabled the remote actuation of the thermally induced SME in alternating magnetic fields [19].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [19]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications
Gupta, A. K., & Gupta, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.012 · Cited by 6,771
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Self-citationIron oxides in the laboratory: preparation and characterization
(1992) · Choice Reviews Online · doi:10.5860/choice.29-2718 · Cited by 2,259
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Self-citationLight-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Self-citationKoerner, H., Price, G., Pearce, N. A., Alexander, M., & Vaia, R. A. (2004) · Nature Materials · doi:10.1038/nmat1059 · Cited by 1,034
Polyurethanes having shape memory effects
Kim, B. K., Lee, S. Y., & Xu, M. (1996) · Polymer · doi:10.1016/s0032-3861(96)00442-9 · Cited by 693
Physical limits of hyperthermia using magnetite fine particles
Hergt, R., Andra, W., d'Ambly, C. G., Hilger, I., Kaiser, W. A., Richter, U., & Schmidt, H.-G. (1998) · IEEE Transactions on Magnetics · doi:10.1109/20.718537 · Cited by 658
Electroactive shape-memory polyurethane composites incorporating carbon nanotubes
Cho, J. W., Kim, J. W., Jung, Y. C., & Goo, N. S. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200400492 · Cited by 603
Size dependence of specific power absorption of Fe3O4 particles in AC magnetic field
Ma, M., Wu, Y., Zhou, J., Sun, Y., Zhang, Y., & Gu, N. (2004) · Journal of Magnetism and Magnetic Materials · doi:10.1016/s0304-8853(03)00426-8 · Cited by 497
Research works printed but not linked: 3
- Lendlein, A. & Kelch, S. (2002) Angew. Chem. Int. Ed. 41, 2034-2057. · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
- Lendlein, A. & Kelch, S. (2005) Clin. Hemorheol. Microcirc. 32, 105-116.
- Hu, J., Ding, X., Tao, X. & Yu, J. (2002) J. Dong Hua Univ. (Engl. Ed.) 19, 3.
Cited by
Items 601–700 of 827
Kow, Y. Y., Chai, A. B., & Ho, J. H. (2019) · Journal of Rubber Research · doi:10.1007/s42464-019-00031-w · Cited by 11
Feng, C., Seki, T., Sakamoto, S., Sasaki, T., Takamizawa, S., & Ito, H. (2022) · Chemical Science · doi:10.1039/d2sc03414j · Cited by 11
6.16 Shape Memory Polymer and Its Composite: Function and Application
Mu, T., Liu, L., Lan, X., Liu, Y., & Leng, J. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10027-x · Cited by 14
Mechanoactive materials in cardiac science
Ponniah, J. K., Chen, H., Adetiba, O., Verduzco, R., & Jacot, J. G. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb00069j · Cited by 11
Ebara, M., Kotsuchibashi, Y., Uto, K., Aoyagi, T., Kim, Y., Narain, R., Idota, N., & Hoffman, J. M. (2014) · NIMS monographs · doi:10.1007/978-4-431-54400-5_7 · Cited by 11
Cai, Y., Feng, X., & Jiang, J. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40220 · Cited by 10
Shape Morphable Soft Machines and Systems Enabled by Responsive Advanced Materials
Jaiswal, S., Dhand, C., & Dwivedi, N. (2025) · Small Methods · doi:10.1002/smtd.202501019 · Cited by 10
Shape memory materials with reversible shape change and self-healing abilities: A review
Mishra, B., & Sharma, S. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.10.820 · Cited by 10
Synthesis and Applications of Carbohydrate-Based Polyurethanes
Manzano, V. E., Kolender, A. A., & Varela, O. J. (2017) · Springer eBooks · doi:10.1007/978-3-319-61288-1_1 · Cited by 12
Plyushch, A., Macutkevic, J., Banys, J., Kuzhir, P., Kalanda, N. A., Petrov, A. V., Silvestre, C., Uimin, M. A., Yermakov, A. Y., & Shenderova, O. A. (2018) · Coatings · doi:10.3390/coatings8050165 · Cited by 11
“Interest is mainly focused on elastomagnetic effects [1] and the wide prospects of applications as actuators, sensors [2–5], and shape-memory materials [6,7].”
BackgroundMagnetic Remote Activation of Shape Recovery in Nanocomposites Based on Tung Oil and Styrene
Meiorin, C., Actis, D. G., Montoro, F. E., Londoño, O. M., Aranguren, M. I., Muraca, D., Zélis, P. M., Knobel, M., & Mosiewicki, M. A. (2018) · physica status solidi (a) · doi:10.1002/pssa.201800311 · Cited by 10
Magnetic‐responsive Covalent Adaptable Networks
Liang, H., Wei, Y., & Ji, Y. (2023) · Chemistry - An Asian Journal · doi:10.1002/asia.202201177 · Cited by 10
Xu, H., & Budhlall, B. M. (2018) · RSC Advances · doi:10.1039/c8ra06715e · Cited by 10
In vivo biomedical applications of magnetic resonance and magnetic materials
Lascialfari, A., Filibian, M., Sangregorio, C., & Carretta, P. (2013) · doi:10.1393/ncr/i2013-10089-8 · Cited by 18
Elastic Magnetic Membrane for Improved Mixing in Microwells
Chong, Z. Z., Sim, W. J., Yeo, Z. T., Li, K. H. H., Ng, S. H., Xia, H., Wong, T. N., Loh, N. H., Tor, S. B., Tan, S. H., et al. (2014) · Micro and Nanosystems · doi:10.2174/1876402907666150211232432 · Cited by 10
“Although efforts have been made to reduce the agglomeration [17, 18], timeconsuming and complex fabrication processes are still needed before they can be successfully integrated into a device.”
BackgroundOverview of Shape-Memory Polymers
Behl, M., & Lendlein, A. (2010) · CRC Press eBooks · doi:10.1201/9781420090208-c1 · Cited by 21
Self-citationSoft, Formstable (Co)Polyester Blend Elastomers
Neffe, A., Izraylit, V., Hommes-Schattmann, P., & Lendlein, A. (2021) · Nanomaterials · doi:10.3390/nano11061472 · Cited by 9
“This is a bit higher than typically observed in physical networks such as multiblock copolymers (Rrec = 55–85%) [55], thermoplastic polyurethanes (Rrec ~ 70%) [56]; (Rrec = 47–80%) [57], poly(butylene 1,4-cyclohexanedicarboxylate) (Rrec = 11–64%) [58], or poly(butylene terephthalate)/ethylene rubber blends (Rrec ~ 60%…”
BackgroundSelf-citationNeffe, A. T., Hanh, B. D., Steuer, S., Wischke, C., & Lendlein, A. (2009) · MRS Proceedings · doi:10.1557/proc-1190-nn06-02 · Cited by 9
Self-citationRecent advances in shape memory scaffolds and regenerative outcomes
Valioğlu, F., Valipour, F., Atazadeh, S., Hasansadeh, M., Khosrowshahi, N. D., Nezamdoust, F. V., Mohammad-Jafarieh, P., Rahbarghazi, R., & Mahdipour, M. (2024) · Biomedical Engineering Letters · doi:10.1007/s13534-024-00417-9 · Cited by 9
“Based on different studies, the temperature is used in different forms of Joule, stimulatory light, and ultrasonic radiation [176, 177].”
Increasing the apparent shear viscosity of polymer composites by uptake of a small amount of water
Wang, D., Wang, X., Yuan, Y., Li, W., Tian, H., & Zhao, S. (2014) · RSC Advances · doi:10.1039/c4ra00541d · Cited by 9
Robust POSS-PEG networks. Nanostructure, viscoelasticity and shape memory behavior
Romo‐Uribe, A. (2022) · Polymer · doi:10.1016/j.polymer.2022.124899 · Cited by 9
Unidirectional Carbon Fiber Reinforced Cyanate‐Based Shape Polymer Composite with Variable Stiffness
Deng, Y., Lan, X., & Leng, J. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200580 · Cited by 9
Shape memory effect in polyimide-based composites with multiple driving methods
Qiu, G., Ma, S., GangLIU, Wang, C., Zhang, D., Gu, Y., Zhang, J., & Yao, J. (2023) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2023.105652 · Cited by 9
Modelling Constrained Recovery of UV-Curable Shape Memory Polymer toward 4D Printing
Zhang, H., Zhang, R., & Yuan, C. (2024) · Chem & Bio Engineering · doi:10.1021/cbe.4c00020 · Cited by 10
Luthardt, L., Raczka, T., Hurle, K., Müssig, S., & Mandel, K. S. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202412296 · Cited by 9
Hassan, R. U., Abbas, N., & Ko, J. (2025) · Gels · doi:10.3390/gels11010032 · Cited by 9
“Moreover, SMPs can undergo multiple shape changes [15] triggered by various external stimuli, such as thermal conditions (heating [16] or cooling [17]), electricity [18], magnetic fields [19], light [20], or specific solutions (chemicals or water [21]).”
Kuo, K., Hu, S., Liu, D., & Chen, S. (2010) · Journal of Materials Chemistry · doi:10.1039/b918246b · Cited by 9
Pooladian, B., & Nikje, M. M. A. (2017) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087917719936 · Cited by 9
“During the last decade, magnetic nanocomposite material development has led to discovering spectacular new phenomena, with potential applications in multidimensional fields.(27) Among many nanoscale materials being verified for Pooladian and Alavi Nikje 197”
BackgroundSpandex Fiber Reinforced Shape Memory Polymer Composites and their Mechanical Properties
Sun, J., Xu, Y. Y., Chen, Y. J., Liu, Y. J., & Leng, J. S. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.410.370 · Cited by 11
“INTRODUCTION Shape Memory Polymer (SMP) has the very good shape memory effects [1-2] , which possess a dual-shape capability, referring to the shape recovery from a temporary shape to the permanent shape after SMPs are exposed to external stimulus, such as electricity [3-7] , light [8] , magnetic fields [9-10] , and s…”
BackgroundLi, Z., Lu, H., Yao, Y., & Lin, L. (2017) · Pigment & Resin Technology · doi:10.1108/prt-01-2016-0016 · Cited by 9
“light, electric current or alternating magnetic fields) and enabling the materials to possess more desirable properties-on-demand had been reported elsewhere (Lu et al., 2011a; Mohr et al., 2006; Li et al., 2012; Cho et al., 2005; Lu and Huang, 2013).”
BackgroundEnhanced structure and magnetic properties of doped nanomagnetite by γ-irradiation
Okasha, N., El-Dek, S. I., Abdelmaksoud, M. K., & Ghaffar, D. N. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.12.050 · Cited by 9
On the free-volume model of multi-shape memory effect in amorphous polymer
Wang, X., Liu, Y., Lu, H., & Fu, Y. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab500e · Cited by 10
Mechanical properties of shape-memory polymers for biomedical applications
Safranski, D. L., & Griffis, J. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-698-2.00002-7 · Cited by 9
Thermo-mechanical reversibility in a shape memory organic salt
Ranjan, S., Honda, H., & Takamizawa, S. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc02554j · Cited by 9
From Invisible to Visible: Pressure‐Responsive Photonic Crystals for Advanced Information Encryption
Li, Z., Soto, M. A., Hamad, W. Y., & MacLachlan, M. J. (2025) · Advanced Optical Materials · doi:10.1002/adom.202501703 · Cited by 8
4D printing innovations and the embracing of additive manufacturing transformations
Chakraborty, D. D., Chakraborty, P., Pramanik, S., Dutta, M., Sen, A., Borah, S., Nath, P. K., & Nargis, S. (2026) · RSC Pharmaceutics · doi:10.1039/d5pm00192g · Cited by 8
Roshith, P. (2026) · Canadian Metallurgical Quarterly · doi:10.1080/00084433.2026.2635285 · Cited by 9
Advanced Magnetic Actuation: Harnessing the Dynamics of Sm2Fe17–xCuxN3 Composites
Koo, K., Kwon, Y., Park, J. Y., & Choa, Y. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c17135 · Cited by 8
Liu, C., Lu, H., Li, G., Hui, D., & Fu, Y. (2019) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ab2860 · Cited by 8
Liu, B., Gu, X., Chen, X., Yang, Y., Zou, J., Yin, H., & Cai, Y. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55252 · Cited by 8
Smart Nanocellulose Composites With Shape-Memory Behavior
Olalla, A. S., Sessini, V., Torres, E. G., & Peponi, L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00009-2 · Cited by 12
Active Annuloplasty System for Mitral Valve Insufficiency
Lantada, A. D., Lafont, P., Rada, I., Jiménez, A., Hernández, J. L., Lorenzo-Yustos, H., & Muñoz-García, J. (2008) · Communications in computer and information science · doi:10.1007/978-3-540-92219-3_4 · Cited by 9
“An alternative to heating by contact (either using resistances or a heating filament), is based on the insertion of magnetic or metallic nanoparticles into the shape-memory polymer itself and then heating it by induction [24].”
BackgroundField-Control, Phase-Transitions, and Life’s Emergence
Mitra-Delmotte, G., & Mitra, A. N. (2012) · Frontiers in Physiology · doi:10.3389/fphys.2012.00366 · Cited by 9
“Alternatively, similar shape memory effects could also have been effectuated by the diffusive entry of small thermo-responsive polymers, and subsequent binding to magnetically heatable colloids in the scaffolds (Mohr et al., 2006; Schmidt, 2007; Zheng et al., 2009).”
BackgroundUrban, M. W. (2016) · Royal Society of Chemistry eBooks · doi:10.1039/bk9781849736565-00403 · Cited by 8
Osti, N. C., Remy, R. A., Mamontov, E., Advíncula, R. C., & Nguyen, N. A. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01971 · Cited by 7
4D Printing of Electrically Activated Reversible Deformation Composite Actuators
Wang, N., Xiao, X., Liu, T., Zhang, C., Gu, M., & Qi, X. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202401345 · Cited by 9
Investigation of mechanical behavior of epoxy shape memory polymers
Wu, X., Liu, Y., & Leng, J. (2009) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.815706 · Cited by 7
“A stimuli to actuate SMP can be water [2], infrared radiation [3-4], electric current [5-6], magnetic field [7] or solution [8].”
BackgroundA Survey of Adaptive Materials and Structures Research in China
Leng, J., Lv, H., & Du, S. (2009) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2009-2389 · Cited by 7
Wawrzyniak, P., & Karaszewski, W. (2020) · Polimery · doi:10.14314/polimery.2020.6.3 · Cited by 9
Öztürk, B., İnan, T., Atakul, H., & Güner, F. S. (2023) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2023.48 · Cited by 7
Bio-Inspired Magnetically Controlled Reversibly Actuating Multimaterial Fibers
Farhan, M., Hartstein, D. S., Pieper, Y., Behl, M., Lendlein, A., & Neffe, A. T. (2023) · Polymers · doi:10.3390/polym15092233 · Cited by 7
“Furthermore, the material design (i.e., surface area-to-volume ratio) can critically affect heat transport and in this way the actuation [23–26].”
BackgroundSelf-citationZhi, J., Mitchell, S. J., Pérez‐Ramírez, J., & Reiser, O. (2015) · ChemCatChem · doi:10.1002/cctc.201500549 · Cited by 7
Overview of crack self-healing
Li, G., Feng, X., & Meng, H. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823472-3.00006-0 · Cited by 8
Electronic Applications of Polyurethane and Its Composites
Ansari, S., & Muralidharan, M. N. (2015) · Springer series on polymer and composite materials · doi:10.1007/978-3-319-23663-6_4 · Cited by 8
Lee, W. L., Low, H. Y., & Christine Ortiz, B. (2017) · Soft Matter · doi:10.1039/c7sm00574a · Cited by 7
Fei, G., Pu, X., Zhuang, T., Liu, B., Wang, Z., & Xia, H. (2017) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2017.07.036 · Cited by 7
“Beyond conventional heating, microwave [14], photo [15-21], magnetism [22, 23], electricity [11, 12 and 24] and ultrasound [25-32] can be used to heat the polymer-based material.”
MethodBiodegradable shape-memory polymers for biomedical applications
Strandman, S., & Zhu, X. X. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-698-2.00011-8 · Cited by 9
Shape memory hybrids : mechanism and design for tailored properties
Ding, Z. (2012) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/50549 · Cited by 12
“Fundamentally, this is still a heating process, similar to that in traditional electro-responsive and magnetoresponsive SMPs (Buckley et al. 2006; Leng et al. 2008b; Mohr et al. 2006).”
BackgroundMethodWischke, C., Neffe, A. T., Steuer, S., & Lendlein, A. (2009) · MRS Proceedings · doi:10.1557/proc-1190-nn11-34 · Cited by 6
Self-citationZhu, C., Chen, L., Shen, Y., Wang, Y., & Liu, C. (2024) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2024.109395 · Cited by 6
“Shape memory composites are a type of exceptional material which can recover their shape when exposed to outer stimuli, such as thermal [1,2], electrical [3,4], magnetic [5,6], and others [7 – 9].”
Numerical simulations for microvascular shape memory polymer composites
Li, Y., & Goulbourne, N. C. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/5/055022 · Cited by 6
Zheng, Y., Shen, J., & Guo, S. (2019) · Advanced structured materials · doi:10.1007/978-981-13-8574-2_11 · Cited by 7
Lendlein, A., Wischke, C., Kratz, K. L., Heuchel, M., Zotzmann, J., Hiebl, B., Neffe, A. T., & Behl, M. (2011) · Elsevier eBooks · doi:10.1016/b978-0-08-055294-1.00271-3 · Cited by 8
Self-citationLuo, W., Liu, J., Fang, C., Liu, B., Xia, H., Li, H., & Huang, J. (2021) · Surfaces and Interfaces · doi:10.1016/j.surfin.2021.101230 · Cited by 6
Beblo, R. V., Joo, J. J., & Reich, G. W. (2015) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x15596625 · Cited by 6
“…and Lendlein, 2010), exfoliated graphite (Madbouly and Lendlein, 2010), metallic nanostrands (Weber and Kamal, 1997b), metallic powders (Buckley et al., 2006; Leng et al., 2008a, 2008b), small wires (Rauscher, 2006), and oxide powders (Mohr et al., 2006; Weigel et al., 2009) have all been proposed.”
BackgroundGupta, Y. N., Bhave, T. M., Ak, C., Pandey, A. K., Sharma, R. B., & Setua, D. K. (2016) · Polymer Engineering and Science · doi:10.1002/pen.24358 · Cited by 6
Recent Advances in Biohybrid Materials for Tissue Engineering and Regenerative Medicine
Wan, Y., Li, X., & Wang, S. (2016) · Journal of Molecular and Engineering Materials · doi:10.1142/s2251237316400013 · Cited by 7
Shape Memory Polymers From Polybenzoxazine-Modified Polymers
Tiptipakorn, S., & Rimdusit, S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804170-3.00048-2 · Cited by 6
Bayerl, T., & Mitschang, P. (2013) · Polymers and Polymer Composites · doi:10.1177/096739111302100501 · Cited by 6
Wang, L., Heuchel, M., Fang, L., Kratz, K. L., & Lendlein, A. (2012) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.2012.10293 · Cited by 6
“Because of the general immiscibility between polar fillers such as mNPs and nonpolar polymer matrices, it is a challenge to achieve a homogeneous dispersion of the mNPs within the SMPs.”
BackgroundSelf-citationThermomechanical characterization of a shape memory polymer based syntactic foam
Nettles, D. (2009) · Louisiana State University · doi:10.31390/gradschool_theses.2569 · Cited by 9
“They concluded that the results were comparable to using the normal thermally induced method [12].”
BackgroundResultFrom 3D to 4D printing: A review
Santos, B., Littlefair, G., & Singamneni, S. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.05.707 · Cited by 11
Deng, J., Lu, H., & Fu, Y. (2025) · Mechanics of Materials · doi:10.1016/j.mechmat.2025.105417 · Cited by 7
Energy localization and transport in two-dimensional Fermi–Pasta–Ulam lattices
Sarkar, R., & Dey, B. (2007) · The European Physical Journal Special Topics · doi:10.1140/epjst/e2007-00203-y · Cited by 5
Lendlein, A., Razzaq, M. Y., Wischke, C., Kratz, K. L., Heuchel, M., Zotzmann, J., Hiebl, B., Neffe, A. T., & Behl, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10213-9 · Cited by 5
Self-citationLu, H., Wang, X., Hossain, M., & Fu, Y. (2020) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202000052 · Cited by 5
Arora, J., & Tallman, T. N. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108439 · Cited by 5
Hu, J. (2013) · Elsevier eBooks · doi:10.1533/9780857098542.231 · Cited by 5
Novel Applications and Future of Shape-Memory Polymers
Huang, W. (2010) · doi:10.1201/9781420090208-16 · Cited by 5
Ternary Polymeric Composites Exhibiting Bulk and Surface Quadruple‐Shape Memory Properties
Buffington, S. L., Posnick, B. M., Paul, J. E., & Mather, P. T. (2018) · ChemPhysChem · doi:10.1002/cphc.201800389 · Cited by 5
Eken, G. A., & Acar, M. H. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109611 · Cited by 5
Shape-memory polymer composites and their applications
Chakraborty, D. D., & Chakraborty, P. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819961-9.00016-5 · Cited by 6
An Investigation of Reconfigurable Magnetomechanical Metamaterials
Galea, R., Farrugia, P., Dudek, K. K., Mangion, L. Z., Grima, J. N., & Gatt, R. (2022) · physica status solidi (b) · doi:10.1002/pssb.202200420 · Cited by 5
Bioinspired dual-response actuators with Janus structure and good biodegradability
Yang, T., You, J., Yin, C., Zhang, J., Wang, Y., & Zhang, J. (2023) · Cellulose · doi:10.1007/s10570-023-05104-z · Cited by 5
Sujithra, R., Srinivasan, M., & Arockiarajan, A. (2015) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x15586587 · Cited by 5
“, 2007), magnetic field (Mohr et al., 2006), laser (Maitland et al.”
BackgroundMultifunctional Polymeric Smart Materials
Leng, J., Lan, X., Liu, Y., & Du, S. (2010) · CRC Press eBooks · doi:10.1201/b10462-4 · Cited by 5
Kim, M., & Kim, J. H. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114095 · Cited by 4
Remotely actuated programmable self-folding origami strings using magnetic induction heating
Lahondes, Q., & Miyashita, S. (2024) · Frontiers in Robotics and AI · doi:10.3389/frobt.2024.1443379 · Cited by 4
Zhang, L., Tao, R., Mao, Y., & Hou, S. (2025) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2025.104252 · Cited by 4
Lantada, A. D., Morgado, P. L., Muñoz-Guijosa, J. M., Sanz, J. L. M., Otero, J. E., Tanarro, E. C., & Ochoa, E. D. L. G. (2014) · Smart Structures and Systems · doi:10.12989/sss.2014.14.4.517 · Cited by 4
Cosmetics Applications of Adaptive and Functional Polymers
(2011) · IMPERIAL COLLEGE PRESS eBooks · doi:10.1142/9781848164765_0008 · Cited by 4
Nanoparticle Netpoints for Shape‐Memory Polymers
Agarwal, P., Chopra, M., & Archer, L. A. (2011) · Angewandte Chemie · doi:10.1002/ange.201103908 · Cited by 5
Biodegradable Shape‐Memory Polymers
Behl, M., Zotzmann, J., Schroeter, M., & Lendlein, A. (2011) · Wiley eBooks · doi:10.1002/9783527635818.ch8 · Cited by 6
Self-citationMagnetic Hyperthermia to Promote Acrylamide Radical Polymerizations
Vassallo, M., Vicentini, M., de Luna, M. S., Barrera, G., Tiberto, P., Manzin, A., & Martella, D. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00271 · Cited by 6
Thermadapt Shape Memory Polymers with Predictable and Arbitrary Shape Shifting
Wang, Y., Pan, Y. M., Zheng, Z., & Ding, X. (2018) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201800390 · Cited by 4
A self healing smart syntactic foam based grid stiffened sandwich structure
John, M. (2009) · Louisiana State University · doi:10.31390/gradschool_dissertations.822 · Cited by 4
Hiebl, B., Kratz, K., Fuhrmann, R., Jung, F., Lendlein, A., & Franke, R.-P. (2009) · MRS Proceedings · doi:10.1557/proc-1190-nn06-05 · Cited by 3
Self-citationModulus‐Switchable Miniature Robots for Biomedical Applications: A Review
Wei, C., Wang, Y., & Yu, J. (2025) · Advanced Robotics Research · doi:10.1002/adrr.202500039 · Cited by 4
Agyemang, M. F., Edwards, A. L. J. L., Zechel, S., Hager, M. D., Schmitt, M. P., & Popp, J. (2025) · Chemical Science · doi:10.1039/d5sc04114g · Cited by 3
“Examples include thermoresponsive SMPs, 147,148 pH-responsive SMPs, 148 light-responsive SMPs, 144,148 electrical responsive SMP, 148 and magnetic responsive SMPs. 148,149 Due to their versatility, SMPs have found wide applications across various industries.”
Ebrahimi, S., Gholami, R., Ahn, C.-H., & Rimdusit, S. (2026) · Polymer Composites · doi:10.1002/pc.70846 · Cited by 3
“Conventionally, this is achieved by incorporating ferromagnetic particles into the SMP matrix, which generate heat via hysteresis losses [28, 29].”
Metadata
- Authors
- Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A.
- Affiliations
- *Institute of Polymer Research, GKSS Research Centre Geesthacht, 14513 Teltow, Germany; and
- DKI, German Institute for Polymers, 64289 Darmstadt, Germany
- Venue
- Proceedings of the National Academy of Sciences
- Publisher
- National Academy of Sciences
- Published
- 2006-02-28
- Volume
- 103
- Issue
- 10
- Pages
- 3540-3545
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- PMC
- PMC1383650
- OpenAlex
- W2130189877
- Cited by
- 819
- References
- 34
- Citations by year
- 2026: 18 · 2025: 29 · 2024: 33 · 2023: 18 · 2022: 40 · 2021: 52 · 2020: 40 · 2019: 51 · 2018: 40 · 2017: 48 · 2016: 47 · 2015: 48 · 2014: 49 · 2013: 60 · 2012: 55
- FWCI
- 30.36
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Proceedings of the National Academy of Sciences (publishedVersion)
- Europe PMC (PubMed Central) (publishedVersion)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations
- Keywords
- shape memory polymers, magnetic nanoparticles, induction heating, thermoplastics, polyether polyurethane, poly(p-dioxanone), polycaprolactone, iron oxide nanoparticles, silica-coated nanoparticles, cold drawing, shape recovery, polymer composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.