The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Triple shape memory polymers by 4D printing
Open accessAbstract
Abstract This article aims at introducing triple shape memory polymers (SMPs) by four-dimensional (4D) printing technology and shaping adaptive structures for mechanical/bio-medical devices. The main approach is based on arranging hot–cold programming of SMPs with fused decomposition modeling technology to engineer adaptive structures with triple shape memory effect (SME). Experiments are conducted to characterize elasto-plastic and hyper-elastic thermo-mechanical material properties of SMPs in low and high temperatures at large deformation regime. The feasibility of the dual and triple SMPs with self-bending features is demonstrated experimentally. It is advantageous in situations either where it is desired to perform mechanical manipulations on the 4D printed objects for specific purposes or when they experience cold programming inevitably before activation. A phenomenological 3D constitutive model is developed for quantitative understanding of dual/triple SME of SMPs fabricated by 4D printing in the large deformation range. Governing equations of equilibrium are established for adaptive structures on the basis of the nonlinear Green–Lagrange strains. They are then solved by developing a finite element approach along with an elastic-predictor plastic-corrector return map procedure accomplished by the Newton–Raphson method. The computational tool is applied to simulate dual/triple SMP structures enabled by 4D printing and explore hot–cold programming mechanisms behind material tailoring. It is shown that the 4D printed dual/triple SMPs have great potential in mechanical/bio-medical applications such as self-bending gripers/stents and self-shrinking/tightening staples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190 · cited 1×
“Shape memory polymers (SMPs) are a class of multi-functional smart materials that are capable of being deformed to temporary shapes and of recovering to their original shape in response to external stimuli, such as temperature [1].”
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Mechanisms of the multi-shape memory effect and temperature memory effect in shape memory polymers
Sun, L., & Huang, W. M. (2010) · Soft Matter · doi:10.1039/c0sm00236d · Cited by 257
Hu, G. F., Damanpack, A. R., Bodaghi, M., & Liao, W. H. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa95ec · Cited by 119
Self-citationA tough shape memory polymer with triple shape memory and two-way shape memory properties
Bai, Y., Zhang, X., Wang, Q., & Wang, T. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta15117d · Cited by 115
Research works printed but not linked: 15
- Liu, 2014, Shape memory polymers and their composites in aerospace applications: a review, Smart Mater. Struct., 23, 10.1088/0964-1726/23/2/023001 · DOI · Paper page
- Wang, 2017, A mini review: shape memory polymers for biomedical applications, Frontiers Chem. Sci. Eng., 11, 143, 10.1007/s11705-017-1632-4 · DOI
- Liu, 2006, Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modeling, Int. J. Plast., 22, 279, 10.1016/j.ijplas.2005.03.004 · DOI · Paper page
- Park, 2016, Three dimensional constitutive model for shape memory polymers using multiplicative decomposition of the deformation gradient and shape memory strains, Mech. Mater., 93, 43, 10.1016/j.mechmat.2015.10.014 · DOI
- Li, 2016, Cold, warm, and hot programming of shape memory polymers, J. Poly. Sci. B, 54, 1319, 10.1002/polb.24041 · DOI · Paper page
- Bodaghi, 2016, Self-expanding/shrinking structures by 4D printing, Smart Mater. Struct., 25, 10.1088/0964-1726/25/10/105034 · DOI · Paper page
- Kwok, 2015, 4D printing for freeform surfaces: design optimization of origami and kirigami structures, Trans. ASME, J. Mech. Des., 137, 10.1115/1.4031023 · DOI
- Yang, 2016, 3D printing of shape memory polymer for functional part fabrication, Int. J. Adv. Manuf. Technol., 84, 2079, 10.1007/s00170-015-7843-2 · DOI · Paper page
- Bodaghi, 2017, Adaptive metamaterials by functionally graded 4D printing, Mater. Des., 135, 26, 10.1016/j.matdes.2017.08.069 · DOI · Paper page
- Lu, 2016, On the Takayanagi principle for the shape memory effect and thermomechanical behaviors in polymers with multi-phases, Smart Mater. Struct., 25, 10.1088/0964-1726/25/12/125001 · DOI
- Lu, 2017, A phenomenological formulation for shape/temperature memory effect in amorphous polymers with multi stress components, Smart Mater. Struct., 26, 10.1088/1361-665X/aa77b3 · DOI
- Mooney, 1940, A theory of large elastic deformation, J. Appl. Phys., 11, 582, 10.1063/1.1712836 · DOI · Paper page
- Truesdell, 1965, 10.1007/978-3-642-46015-9_1 · DOI · Paper page
- Reddy, 2004, 10.1093/acprof:oso/9780198525295.001.0001 · DOI · Paper page
- Huang, 2013, Shaping tissue with shape memory materials, Adv. Drug Deliv. Rev., 65, 515, 10.1016/j.addr.2012.06.004 · DOI · Paper page
Cited by
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Ryan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Self-citation3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
Metadata
- Authors
- Bodaghi, M., Damanpack, A. R., & Liao, W. H.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2018-05-08
- Volume
- 27
- Issue
- 6
- Pages
- 065010
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2795452127
- Cited by
- 187
- References
- 8
- FWCI
- 11.51
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- publishingsupport.iopscience.iop.org/iop-standard/v1 (vor)
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- Funders
- Research Grants Council of the Hong Kong Special Administrative Region, China (CUHK 14202016)
- The Chinese University of Hong Kong (Project ID: 3132823)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Triple shape memory polymers by 4D printing. https://app.cochat.ai/papers/10.1088/1361-665x/aabc2a
- The paper
- Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2018). Triple shape memory polymers by 4D printing. Smart Materials and Structures. https://doi.org/10.1088/1361-665x/aabc2a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.