PLA short sub-micron fiber reinforcement of 3D bioprinted alginate constructs for cartilage regeneration
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In this study, we present an innovative strategy to reinforce 3D-printed hydrogel constructs for cartilage tissue engineering by formulating composite bioinks containing alginate and short sub-micron polylactide (PLA) fibers. We demonstrate that Young's modulus obtained for pristine alginate constructs (6.9 ± 1.7 kPa) can be increased threefold (up to 25.1 ± 3.8 kPa) with the addition of PLA short fibers. Furthermore, to assess the performance of such materials in cartilage tissue engineering, we loaded the bioinks with human chondrocytes and cultured in vitro the bioprinted constructs for up to 14 days. Live/dead assays at day 0, 3, 7 and 14 of in vitro culture showed that human chondrocytes were retained and highly viable (∼80%) within the 3D deposited hydrogel filaments, thus confirming that the fabricated composites materials represent a valid solution for tissue engineering applications. Finally, we show that the embedded chondrocytes during all the in vitro culture maintain a round morphology, a key parameter for a proper deposition of neocartilage extracellular matrix.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Geometric cues for directing the differentiation of mesenchymal stem cells
Kilian, K. A., Bugarija, B., Lahn, B. T., & Mrksich, M. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0903269107 · Cited by 1,841
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Self-citation3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Self-citation
Cited by
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Alginate and alginate composites for biomedical applications
Ahmad Raus, R., Wan Nawawi, W. M. F., & Nasaruddin, R. R. (2021) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2020.10.001 · Cited by 627
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects
Kačarević, Ž. P., Rider, P. M., Alkildani, S., Retnasingh, S., Smeets, R., Jung, O., Ivanišević, Z., & Barbeck, M. (2018) · Materials · doi:10.3390/ma11112199 · Cited by 479
Metadata
- Authors
- Kosik-Kozioł, A., Costantini, M., Bolek, T., Szöke, K., Barbetta, A., Brinchmann, J., & Święszkowski, W.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2017-11-14
- Volume
- 9
- Issue
- 4
- Pages
- 044105
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2761258043
- Cited by
- 114
- References
- 4
- FWCI
- 3.72
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: PLA short sub-micron fiber reinforcement of 3D bioprinted alginate constructs for cartilage regeneration. https://app.cochat.ai/papers/10.1088/1758-5090/aa90d7
- The paper
- Kosik-Kozioł, A., Costantini, M., Bolek, T., Szöke, K., Barbetta, A., Brinchmann, J., & Święszkowski, W. (2017). PLA short sub-micron fiber reinforcement of 3D bioprinted alginate constructs for cartilage regeneration. Biofabrication. https://doi.org/10.1088/1758-5090/aa90d7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.