Determining the Optimal Decellularization and Sterilization Protocol for Preparing a Tissue Scaffold of a Human-Sized Liver Tissue
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Attaining a well-qualified whole decellularized organ applicable for an enduring and successful transplantation, decellularization protocols should be organ specific in terms of decellularizing agents and time of tissue exposure. Since a bioscaffold resulting from a large solid organ should have the potential to preserve its three-dimensional architecture and consistency for at least several months in the site of transplantation, evaluating the mechanical properties of the bioscaffold is mandatory before transplantation. In the current study, we compared five different decellularization protocols and also two main decellularization techniques (perfusion vs. diffusion) to decellularize the sheep liver, which is similar to the human liver in terms of size and anatomy. Moreover, we assessed the retaining of vascular network by dye injection and angiography. We also determined the most proper sterilization method by comparing six different sterilization methods. The mechanical properties of the scaffolds were assessed by applying tensile strength, suture retention, and compressive strength tests. The perfusion technique showed better results compared to the diffusion technique. The protocol containing ammonium hydroxide and triton X-100 was the most proper decellularization protocol leading to completely decellularized livers along with intact vascular network. Furthermore, we noted that application of streptokinase in washing step facilitates decellularization. Our results also showed that a combination of two sterilization methods is necessary for complete sterilization of a sheep liver and peracetic acid or ethylene oxide+gamma irradiation was associated with the best outcome. Determining the most appropriate decellularization and sterilization method for each organ along with assessing the mechanical properties of the resulting bioscaffold are principal steps before fabricating efficient artificial organs in the foreseeable future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perfusion-decellularized matrix: using nature's platform to engineer a bioartificial heart
Ott, H. C., Matthiesen, T. S., Goh, S.-K., Black, L. D., Kren, S. M., Netoff, T. I., & Taylor, D. A. (2008) · Nature Medicine · doi:10.1038/nm1684 · Cited by 2,650
Decellularization of tissues and organs
Gilbert, T. W., Sellaro, T. L., & Badylak, S. F. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.014 · Cited by 2,222
Extracellular matrix as a biological scaffold material: Structure and function
BADYLAK, S., FREYTES, D., & GILBERT, T. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.09.013 · Cited by 1,671
Uygun, B. E., Soto-Gutierrez, A., Yagi, H., Izamis, M.-L., Guzzardi, M. A., Shulman, C., Milwid, J., Kobayashi, N., Tilles, A., Berthiaume, F., et al. (2010) · Nature Medicine · doi:10.1038/nm.2170 · Cited by 1,370 · cited 4×
“1,2,6,7,23,24 In these studies, mechanical values of the bioscaffolds have not been measured in vitro neither was available a long-term in vivo follow-up to evaluate the mechanical properties, which are critical parameters for a successful transplantation.”
InfluentialThe extracellular matrix as a biologic scaffold material
Badylak, S. F. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.04.043 · Cited by 1,022 · cited 3×
“10 For multilayer forms of the ECM, it takes 90–120 days for complete degradation.”
Xenogeneic extracellular matrix as a scaffold for tissue reconstruction
Badylak, S. F. (2004) · Transplant Immunology · doi:10.1016/j.trim.2003.12.016 · Cited by 747 · cited 3×
“9,11,15,38–41 For calculating the cell survival rate, the remaining cells were counted in eight random high-power fields (X 400), and the averaged number was divided by the number of cells in the control group, then the result was multiplied by 100 and reported as the cell survival rate.”
The use of whole organ decellularization for the generation of a vascularized liver organoid
Baptista, P. M., Siddiqui, M. M., Lozier, G., Rodriguez, S. R., Atala, A., & Soker, S. (2011) · Hepatology · doi:10.1002/hep.24067 · Cited by 681
Decellularized Native and Engineered Arterial Scaffolds for Transplantation
Dahl, S. L. M., Koh, J., Prabhakar, V., & Niklason, L. E. (2003) · Cell Transplantation · doi:10.3727/000000003108747136 · Cited by 406
Degradation Products of Extracellular Matrix Affect Cell Migration and Proliferation
Reing, J. E., Zhang, L., Myers-Irvin, J., Cordero, K. E., Freytes, D. O., Heber-Katz, E., Bedelbaeva, K., McIntosh, D., Dewilde, A., Braunhut, S. J., et al. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0425 · Cited by 387
Assessing Porcine Liver-Derived Biomatrix for Hepatic Tissue Engineering
Lin, P., Chan, W. C. W., Badylak, S. F., & Bhatia, S. N. (2004) · Tissue Engineering · doi:10.1089/ten.2004.10.1046 · Cited by 236 · cited 1×
“1,2,6,7,23,24 In these studies, mechanical values of the bioscaffolds have not been measured in vitro neither was available a long-term in vivo follow-up to evaluate the mechanical properties, which are critical parameters for a successful transplantation.”
Cited by
Methods of tissue decellularization used for preparation of biologic scaffolds and in vivo relevance
Keane, T. J., Swinehart, I. T., & Badylak, S. F. (2015) · Methods · doi:10.1016/j.ymeth.2015.03.005 · Cited by 670
Decellularized human liver as a natural 3D-scaffold for liver bioengineering and transplantation
Mazza, G., Rombouts, K., Rennie Hall, A., Urbani, L., Vinh Luong, T., Al-Akkad, W., Longato, L., Brown, D., Maghsoudlou, P., Dhillon, A. P., et al. (2015) · Scientific Reports · doi:10.1038/srep13079 · Cited by 415
Neishabouri, A., Soltani Khaboushan, A., Daghigh, F., Kajbafzadeh, A.-M., & Majidi Zolbin, M. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.805299 · Cited by 281
Self-citationRana, D., Zreiqat, H., Benkirane-Jessel, N., Ramakrishna, S., & Ramalingam, M. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2061 · Cited by 243
“Sterilization by γ-irradiation at a conventional dose can also modify acellular organ mechanics, with potential implications for organ bioengineering (Kajbafzadeh et al., 2013).”
BackgroundInfluentialGolebiowska, A. A., Intravaia, J. T., Sathe, V. M., Kumbar, S. G., & Nukavarapu, S. P. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.09.017 · Cited by 236
“Preceding implantation, it is paramount that biological constructs are sterilized and rid of existing genetic material and residual bacterial and viral content to minimize immunogenicity risk [57].”
Background
Metadata
- Authors
- Kajbafzadeh, A.-M., Javan-Farazmand, N., Monajemzadeh, M., & Baghayee, A.
- Venue
- Tissue Engineering Part C: Methods
- Publisher
- SAGE Publications
- Published
- 2013-08
- Volume
- 19
- Issue
- 8
- Pages
- 642-651
- ISSN
- 1937-3384 (ISSN-L)
- 1937-3392
- OpenAlex
- W2017292362
- Cited by
- 125
- References
- 10
- FWCI
- 7.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.