Student or educator? Sign up with your school email and get 6 months of Pro free.

The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index; 4 of the 15 sources its claims cite were checked for support.

Red-light excited efficient metal-free near-infrared room-temperature phosphorescent films

Open access
Sun, Siyu, Ma, Liangwei, Wang, Jie, Ma, Xiang, Tian, He · 2022 · National Science Review

Abstract

A set of red-light-excited, metal-free room-temperature phosphorescence (RTP) systems was constructed with brominated phenolsulfonephthaleine derivatives. The best metal-free RTP system has the reddest near-infrared (NIR) RTP emission (λp = 819 nm) with the highest phosphorescence quantum yield (ΦRTP = 3.0%) so far identified. The RTP emission can be switched ON-OFF by adding acid and alkali alternately. A logic operation with half-subtractor function and dual-channel response (visible light emission/NIR RTP emission) was also constructed based on these properties.

Overview

CoChat Summary

TL;DR

A set of red-light-excited, metal-free near-infrared room-temperature phosphorescent films was built by doping brominated phenolsulfonephthaleine derivatives into polyvinyl alcohol. The best film, TBPB@PVA-N, gave NIR RTP at λp = 819 nm with ΦRTP = 3.0%, and the system was used for an acid/base-controlled ON–OFF switch and half-subtractor logic operation.

Key findings

  • TBPB@PVA-N showed the reddest NIR RTP emission and highest phosphorescence quantum yield reported here: λex = 634 nm, λp = 819 nm, ΦRTP = 3.0%, τP = 0.27 ms.
  • BR@PVA-N and BPB@PVA-N emitted at λp = 789 nm (ΦRTP = 1.8%, τP = 0.72 ms) and λp = 793 nm (ΦRTP = 2.6%, τP = 0.58 ms), respectively; the paper’s reference metal-free NIR RTP material had λp = 770 nm and ΦRTP = 0.5%.
  • RTP emission could be switched ON–OFF by alternating acid and base, and a half-subtractor logic operation was constructed with dual-channel response (visible light emission/NIR RTP emission).
  • The total responsive speed of the logic operation was around 2–4 seconds per loop.

Methods

  • Three brominated phenolsulfonephthaleine derivatives—bromophenol red (BR), bromophenol blue (BPB), and tetrabromophenol blue (TBPB)—were doped at 1 wt% into PVA films; neutral films (PSP@PVA-N) were open-ring, and acidic films (PSP@PVA-H) were closed-ring.
  • Photophysical characterization included UV-Vis absorption, prompt fluorescence, delayed emission, excitation spectra, delayed-emission lifetimes, and absolute photoluminescence quantum yields.
  • DFT/TD-DFT calculations analyzed HOMO/LUMO orbitals, excited-state energy diagrams, and spin-orbit matrix elements for BR-N, BPB-N, and TBPB-N.

Limitations

  • The paper states that constructing NIR emission is difficult because of the energy-gap law, and that the short triplet-state lifetime must be reconsidered because a long lifetime can quench NIR radiative emission.
  • The paper notes that PVA with low alcoholysis degree can crosslink under alkaline conditions, and excessive base can sharply quench both visible and NIR emissions; regenerated RTP after acid–base cycling was reduced compared with the original state before vacuum drying.
  • Evident from the text: the study is limited to three related dyes in a PVA matrix and to film-based photophysical/logic demonstrations, with no broader application testing reported.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1093/nsr/nwab085

Cites

45 of 45 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1. (a) RTP emission of PSP@PVA-N (λex = 550 nm). (b) Structural transformation of BR, BPB and TBPB in aqueous solution with differing pH values and their charge distribution in the ground state (S0). The specific color regions (orange, dark pink and blue) correspond to specific functional groups of molecules.
Figure 1. (a) RTP emission of PSP@PVA-N (λex = 550 nm). (b) Structural transformation of BR, BPB and TBPB in aqueous solution with differing pH values and their charge distribution in the ground state (S0). The specific color regions (orange, dark pink and blue) correspond to specific functional groups of molecules.CC BY · PubMed Central
Figure 2. Photophysical properties of near-infrared RTP materials. Prompted fluorescence spectra, delayed emission spectra and the corresponding excitation spectra of (a) BR@PVA-N (λex = 550 nm, λem, prompted = 650 nm, λem, delayed = 800 nm), (b) BPB@PVA-N (λex = 600 nm, λem, prompted = 650 nm, λem, delayed = 800 nm) and (c) TBPB@PVA-N (λex = 600 nm, λem, prompted = 650 nm, λem, delayed = 800 nm). Steady state photoluminescence spectra of (d) BR@PVA-N (λex = 550 nm), (e) BPB@PVA-N (λex = 550 nm) and (f) TBPB@PVA-N (λex = 550 nm). Prompted fluorescence spectra, delayed emission spectra and the corresponding excitation spectra of (g) BR@PVA-H (λex = 450 nm, λem = 600 nm) and (h) BPB@PVA-H (λex = 450 nm, λem = 600 nm).
Figure 2. Photophysical properties of near-infrared RTP materials. Prompted fluorescence spectra, delayed emission spectra and the corresponding excitation spectra of (a) BR@PVA-N (λex = 550 nm, λem, prompted = 650 nm, λem, delayed = 800 nm), (b) BPB@PVA-N (λex = 600 nm, λem, prompted = 650 nm, λem, delayed = 800 nm) and (c) TBPB@PVA-N (λex = 600 nm, λem, prompted = 650 nm, λem, delayed = 800 nm). Steady state photoluminescence spectra of (d) BR@PVA-N (λex = 550 nm), (e) BPB@PVA-N (λex = 550 nm) and (f) TBPB@PVA-N (λex = 550 nm). Prompted fluorescence spectra, delayed emission spectra and the corresponding excitation spectra of (g) BR@PVA-H (λex = 450 nm, λem = 600 nm) and (h) BPB@PVA-H (λex = 450 nm, λem = 600 nm).CC BY · PubMed Central
Figure 3. Theoretical analysis. (a) The HOMO orbitals and LUMO orbitals of BR, BPB and TBPB were calculated using DFT by Gaussian 09 in the open-ring states (in the orange box) and closed-ring states (in the red box) (isosurface value = 0.02) (Fig. S11) [41]. The energy diagram (based on the optimized geometry of the T1 state) of the excited states S1 and Tn for (b) BR-N, (c) BPB-N and (d) TBPB-N (n = 1,2; units: eV).
Figure 3. Theoretical analysis. (a) The HOMO orbitals and LUMO orbitals of BR, BPB and TBPB were calculated using DFT by Gaussian 09 in the open-ring states (in the orange box) and closed-ring states (in the red box) (isosurface value = 0.02) (Fig. S11) [41]. The energy diagram (based on the optimized geometry of the T1 state) of the excited states S1 and Tn for (b) BR-N, (c) BPB-N and (d) TBPB-N (n = 1,2; units: eV).CC BY · PubMed Central
Figure 4. (a) Delayed emission spectra (BR@PVA-N, λex = 550 nm) and prompted emission spectra (BR@PVA-H, λex = 450 nm) of BR@PVA films after insitu acid-base adjustment. (State I and State III: open-ring state; State II: closed-ring state.) (b) Delayed emission spectra (BPB@PVA-N, λex = 550 nm) and prompted emission spectra (BPB@PVA-H, λex = 450 nm) of BPB@PVA films after insitu acid-base adjustment. (c) The logic operation of the half-subtractor was constructed using the reversible properties of the PSP molecules adjusted by acid and base.
Figure 4. (a) Delayed emission spectra (BR@PVA-N, λex = 550 nm) and prompted emission spectra (BR@PVA-H, λex = 450 nm) of BR@PVA films after insitu acid-base adjustment. (State I and State III: open-ring state; State II: closed-ring state.) (b) Delayed emission spectra (BPB@PVA-N, λex = 550 nm) and prompted emission spectra (BPB@PVA-H, λex = 450 nm) of BPB@PVA films after insitu acid-base adjustment. (c) The logic operation of the half-subtractor was constructed using the reversible properties of the PSP molecules adjusted by acid and base.CC BY · PubMed Central

Verification

Claims the paper makes

3 Valid · 1 Not valid · 6 Not checked · 45 Own results and interpretations

30 more claims

Create a free account to see all 55 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 3
  • It may state two separate claims as one. 18
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 45 references

Research works printed but not linked: 1

  1. Wu, 2020, Molecular phosphorescence in polymer matrix with reversible sensitivity, ACS Appl Mater Interfaces, 12, 20765, 10.1021/acsami.0c04859 · DOI · Paper page

Cited by

See all 108

Metadata

Authors
Sun, S., Ma, L., Wang, J., Ma, X., & Tian, H.
Affiliations
East China University of Science and Technology (CN)
Corresponding author
Ma, Xiang
Venue
National Science Review
Published
2021-05-11
Volume
9
Issue
2
Pages
nwab085-nwab085
ISSN
  • 2053-714X (ISSN-L)
  • 2095-5138
OpenAlex
W3163480234
Cited by
108
References
45
Citations by year
2026: 8 · 2025: 14 · 2024: 30 · 2023: 24 · 2022: 17 · 2021: 15
FWCI
6.53
Type
journal article
Language
en
Open access
Locations
  • National Science Review (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
  • National Natural Science Foundation of China (21788102, 22125803, 22020102006, 21871083, 21722603)
  • Shanghai Municipal Science and Technology Commission (2018SHZDZX03)
  • Program of Shanghai Academic/Technology Research Leader (20XD1421300)
  • Shanghai Education Development Foundation (19SG26)
  • Shanghai Municipal Education Commission (2017-01-07-00-02-E00010)
Topics
  • Physical Sciences › Materials Science › Materials Chemistry › Luminescence and Fluorescent Materials
  • Physical Sciences › Chemistry › Spectroscopy › Molecular Sensors and Ion Detection
  • Physical Sciences › Materials Science › Materials Chemistry › Luminescence Properties of Advanced Materials
Keywords
room-temperature phosphorescence, metal-free phosphors, near-infrared emission, red light excitation, logic gates, half subtractor, phosphorescence quantum yield

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Red-light excited efficient metal-free near-infrared room-temperature phosphorescent films. https://app.cochat.ai/papers/10.1093/nsr/nwab085
The paper
Sun, S., Ma, L., Wang, J., Ma, X., & Tian, H. (2022). Red-light excited efficient metal-free near-infrared room-temperature phosphorescent films. National Science Review. https://doi.org/10.1093/nsr/nwab085

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.