Impact of lean strategy on operational performance: a study of Thai manufacturing companies
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Purpose: The purpose of this paper is to examine the extent to which lean management practices are adopted by manufacturing organizations in Thailand and their impact on firms' operational performance. Design/methodology/approach: Using a survey questionnaire, data were collected against 13 lean practices from 187 middle and senior managers belonging to 187 Thai manufacturing firms. Using factor analysis these lean practices were then clustered into three higher level constructs namely just in time (JIT), waste minimization and flow management. The responding firms were categorized into small and medium enterprises (SMEs) and large enterprises (LEs) based on size and Thai‐owned, foreign‐owned and joint venture firms based on ownership. The multiple regression models were employed to investigate the effects of three lean constructs on operational performance in different categories of firms. The operational performance is measured by four parameters such as quick delivery compared to competitors, unit cost of products relative to competitors, overall productivity and customer satisfaction. Findings: The results indicate that all three lean constructs are significantly related to operational performance. JIT has a higher level of significance in LEs compared with SMEs, whereas for waste minimization there is a higher level of significance for SMEs compared with LEs. Flow management has a much lower level of significance for both SMEs and LEs. With respect to ownership, JIT is highly significant to operational performance for all three ownership groups (Thai, foreign and joint venture). Foreign‐owned companies show a higher level of significance on operational performance for both waste management and flow management than Thai and joint venture companies. Originality/value: The paper provides insights into the adoption of lean practices in an Asian context and using survey data as opposed to case studies, and provides further evidence that lean practices are significant in enhancing operational performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Developing buyer-seller relationships
Dwyer, F. R., Schurr, P. H., & Oh, S. (1987) · Journal of Marketing · doi:10.1177/002224298705100202 · Cited by 9,139
Lean manufacturing: context, practice bundles, and performance
Shah, R., & Ward, P. T. (2003) · Journal of Operations Management · doi:10.1016/s0272-6963(02)00108-0 · Cited by 2,897 · cited 3×
“Source: Adapted from Shah and Ward (2003). JMTM 21,7”
BackgroundMethodLean Thinking—Banish Waste and Create Wealth in your Corporation
Womack, J. P., & Jones, D. T. (1997) · Journal of the Operational Research Society · doi:10.1057/palgrave.jors.2600967 · Cited by 2,122
A framework of supply chain management literature
Tan, K. C. (2001) · European Journal of Purchasing & Supply Management · doi:10.1016/s0969-7012(00)00020-4 · Cited by 895 · cited 1×
“These measures were derived from several criteria, which have been conceptualized and used in previous empirical studies of lean manufacturing and supply chain management (Tan, 2001; Shah and Ward, 2003).”
MethodSpecial Section: Toward a Theory of Business Process Change Management
Kettinger, W. J., & Grover, V. (1995) · Journal of Management Information Systems · doi:10.1080/07421222.1995.11518068 · Cited by 277
Lean implementation within SMEs: a literature review
Hu, Q., Mason, R., Williams, S. J., & Found, P. (2015) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-02-2014-0013 · Cited by 275
Research works printed but not linked: 46
- Abdulmalek, F.A. and Rajgopal, J. (2007), “Analysing the benefits of lean manufacturing and value stream mapping via simulation: a process sector case study”, International Journal of Production Economics, Vol. 107, pp. 223‐36. · DOI · Paper page
- Ahire, L.S., Golhar, D.Y. and Waller, M.A. (1996), “Development and validation of TQM implementation constructs”, Decision Sciences, Vol. 27 No. 1, pp. 23‐56. · DOI · Paper page
- Anand, G. and Kodali, R. (2009), “Selection of lean manufacturing systems using the analytic network process – a case study”, Journal of Manufacturing Technology Management, Vol. 20 No. 2, pp. 258‐89. · DOI · Paper page
- Bayou, M.E. and de Korvin, A. (2008), “Measuring the leanness of manufacturing systems – a case study of Ford Motor Company and General Motors”, Journal of Engineering Technology Management, Vol. 25, pp. 287‐304. · DOI · Paper page
- Beaumont, N., Schroder, R. and Sohal, A. (2002), “Do foreign‐owned firms manage advanced manufacturing technology better?”, International Journal of Operations & Production Management, Vol. 22 No. 7, pp. 759‐71. · doi:10.1108/01443570210433535
- Berry, L. (1995), “Relationship marketing of services – growing interest, emerging perspectives”, Journal of the Academy of Marketing Science, Vol. 23 No. 4, pp. 236‐45. · DOI · Paper page
- Blanchard, D. (2007), “Lean green and low cost”, Industry Week, Vol. 256 No. 10, pp. 37‐9.
- Browning, T.R. and Heath, R.D. (2009), “Reconceptualizing the effects of lean on production costs with evidence from the F‐22 program”, Journal of Operations Management, Vol. 27, pp. 23‐44. · DOI · Paper page
- Cagliano, R., Caniata, F. and Spina, G. (2004), “Lean, agile and traditional supply: how do they impact manufacturing performance?”, Journal of Purchasing & Supply Management, Vol. 10, pp. 151‐64. · DOI
- Coronado, R.B. and Antony, J. (2002), “Critical success factors for the successful implementation of six sigma projects in organisations”, The TQM Magazine, Vol. 14 No. 2, pp. 92‐9. · DOI · Paper page
- Denton, P.D. and Hodgson, A. (1997), “Implementing strategy‐led BPR in a small manufacturing company”, The Fifth International Conference on FACTORY 2000 – The Technology Exploitation Process Conference Publication No. 435, Cambridge, pp. 1‐8. · doi:10.1049/cp:19970113
- Dhandapani, V., Potter, A. and Naim, M. (2004), “Applying lean thinking: a case study of an Indian steel plant”, International Journal of Logistics: Research and Applications, Vol. 7 No. 3, pp. 239‐50. · DOI · Paper page
- Doolen, T.L. and Hacker, M.E. (2005), “A review of lean assessment in organizations: an exploratory study of lean practices by electronics manufacturers”, Journal of Manufacturing Systems, Vol. 24 No. 1, pp. 55‐67. · DOI · Paper page
- Eckes, G. (2000), The Six Sigma Revolution, Wiley, New York, NY.
- Frazier, G.L. (1999), “Organizing and managing channels of distribution”, Academy of Marketing Science Journal, Vol. 27, pp. 223‐40. · DOI · Paper page
- Freeman, C. and Perez, C. (1988), “Structural crisis of adjustment: business cycles and investment behaviour”, in Dosi, G., Freedmand, C., Nelson, R.R., Silverberg, G. and Soete, L. (Eds), Technical Change and Economic Theory, Pinter, London, pp. 38‐66.
- Harrison, A. and van Hoek, R. (2008), Logistics Management and Strategy‐competing Through the Supply Chain, 3rd ed., Prentice Hall Financial Times, Upper Saddle River, NJ.
- Hausman, A. (2001), “Variations in relationship strength and its impact on performance and satisfaction in business relationships”, The Journal of Business & Industrial Marketing, Vol. 16 Nos 6/7, pp. 600‐17. · DOI · Paper page
- Henderson, K. and Evans, J. (2000), “Successful implementation of six sigma: benchmarking general electric company”, Benchmarking: An International Journal, Vol. 7 No. 4, pp. 260‐81. · DOI · Paper page
- Hines, P. (1996), “Purchasing for lean production: the new strategic agenda”, International Journal of Purchasing & Materials Management, Vol. 32 No. 1, pp. 2‐10. · doi:10.1111/j.1745-493x.1996.tb00214.x
- Hines, P., Holweg, M. and Rich, N. (2004), “Learning to evolve”, International Journal of Operations & Production Management, Vol. 24 No. 10, pp. 994‐1011. · DOI · Paper page
- Holden, M.T. and O'Toole, T. (2004), “A quantitative exploration of communication's role in determining the governance of manufacturer‐retailer relationships”, Industrial Marketing Management, Vol. 33, pp. 539‐48. · doi:10.1016/j.indmarman.2004.02.003
- Kalwani, M.U. and Narayandas, N. (1995), “Long‐term manufacturer‐supplier relationships: do they pay?”, Journal of Marketing, Vol. 59 No. 1, pp. 5‐23. · doi:10.2307/1252010
- Keller, A.Z., Fouad, R.H. and Zaitri, C.K. (1991), “Status and structure of just‐in‐time manufacturing in the UK”, in Satir, A. (Ed.), Just‐in‐time Manufacturing Systems, Elsevier, Amsterdam, pp. 115‐31.
- Krafcik, J.F. (1998), “Triumph of the lean production system”, Sloan Management Review, Vol. 30 No. 1, pp. 41‐52.
- Lambert, D.M., Cooper, M.C. and Pagh, J.D. (1998), “Supply chain management: implementation issues and research opportunities”, The International Journal of Logistics Management, Vol. 9 No. 2, pp. 1‐19. · DOI · Paper page
- Levy, D. (1997), “Lean production in an international supply chain”, Sloan Management Review, Vol. 38 No. 2, pp. 94‐103.
- McIvor, R. (2001), “Lean supply: the design and cost reduction dimensions”, European Journal of Purchasing & Supply Management, Vol. 7, pp. 227‐42. · DOI
- MacDuffie, J.P. (1995), “Human resource bundles and manufacturing performance: organisational logic and flexible production systems in the world auto industry”, Industrial & Labor Relations Review, Vol. 48 No. 2, pp. 197‐221. · DOI · Paper page
- Mintzberg, H. and Mintzberg, Y. (1988), “Strategy making as craft”, in Urabe, K., Child, J. and Kagono, T. (Eds), Innovation and Management: International Comparisons, De Gruyter, Berlin, pp. 167‐96. · doi:10.1515/9783110864519-012
- Motwani, J. (2003), “A business process change framework for examining lean manufacturing: a case study”, Industrial Management & Data Systems, Vol. 103 No. 5, pp. 339‐46. · DOI · Paper page
- Nicholas, J. (1998), Competitive Manufacturing Management: Continuous Improvement, Lean Production, Customer‐focused Quality, Irwin/McGraw‐Hill, New York, NY.
- Nunnaally, J.C. (1967), Psychometric Theory, McGraw‐Hill, New York, NY.
- Oakland, J. (1993), Total Quality Management: The Route to Improving Performance, Butterworth‐Heinemann, Oxford.
- Ohno, T. (1988), Toyota Production System – Beyond Large Scale Production, Productivity Press, Cambridge, MA.
- Oliver, N., Delbridge, R. and Lowe, J. (1996), “The European auto components industry: manufacturing performance and practice”, International Journal of Operations & Production Management, Vol. 16 No. 11, pp. 85‐98. · DOI
- Parry, G.C. and Turner, C.E. (2006), “Application of lean visual process management tools”, Production Planning & Control, Vol. 17 No. 1, pp. 77‐86. · DOI · Paper page
- Rahman, S. and Bullock, P. (2005), “Soft TQM, hard TQM and organisational performance relationships: an empirical investigation”, Omega – The International Journal of Management Science, Vol. 33, pp. 73‐83. · doi:10.1016/j.omega.2004.03.008
- Shah, R. and Ward, P.T. (2007), “Defining and developing measures of lean production”, Journal of Operations Management, Vol. 25, pp. 785‐805. · DOI · Paper page
- Smeds, R. (1988), “The role of computerized information systems in the development of organizational structure”, International Studies of Management & Organization, Vol. 17 No. 4, pp. 90‐104. · DOI
- Smeds, R. (1994), “Managing change towards lean enterprises”, International Journal of Operations & Production Management, Vol. 14 No. 3, pp. 66‐82. · DOI
- van De Ven, A.H. (1986), “Central problems in the management of innovation”, Management Science, Vol. 32 No. 5, pp. 590‐607. · DOI · Paper page
- Voss, C.A. and Robinson, S.J. (1987), “Application of just‐in‐time manufacturing techniques in the United Kingdom”, International Journal of Operations & Production Management, Vol. 7 No. 4, pp. 46‐52. · DOI · Paper page
- Webster, F.E. Jr (1992), “The changing role of marketing in the corporation”, Journal of Marketing, Vol. 58, pp. 1‐17. · DOI · Paper page
- Xu, L. and Beamon, B.N. (2006), “Supply chain coordination and cooperation mechanisms: an attribute‐based approach”, Journal of Supply Chain Management, Vol. 42 No. 1, pp. 4‐12. · DOI · Paper page
- Zayko, M.J., Broughman, D.J. and Hancock, W.M. (1997), “Lean manufacturing yields world‐class improvements for small manufacturer”, IIE Solution, April, pp. 36‐40.
Cited by
Golicic, S. L., & Smith, C. D. (2013) · Journal of Supply Chain Management · doi:10.1111/jscm.12006 · Cited by 790
The impact of lean methods and tools on the operational performance of manufacturing organisations
Belekoukias, I., Garza-Reyes, J. A., & Kumar, V. (2014) · International Journal of Production Research · doi:10.1080/00207543.2014.903348 · Cited by 474
“(2002) as acceptable, based on comparable sample sizes used on similar researches (i.e. Thun et al., 2010; Rahman et al., 2010; Bhasin, 2012), this response rate was still considered acceptable to carry out a reliable analysis and drawn conclusions to complement the studies discussed in Section 2.”
BackgroundMethodInfluentialThanki, S., Govindan, K., & Thakkar, J. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.105 · Cited by 367
Lean manufacturing and sustainable performance: Trends and future challenges
Henao, R., Sarache, W., & Gómez, I. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.116 · Cited by 314
Shashi, Centobelli, P., Cerchione, R., & Singh, R. (2019) · International Journal of Production Economics · doi:10.1016/j.ijpe.2019.02.011 · Cited by 297
Metadata
- Authors
- Rahman, S., Laosirihongthong, T., & Sohal, A. S.
- Venue
- Journal of Manufacturing Technology Management
- Publisher
- Emerald
- Published
- 2010-09-12
- Volume
- 21
- Issue
- 7
- Pages
- 839-852
- ISSN
- 1741-038X (ISSN-L)
- OpenAlex
- W1993567199
- Cited by
- 244
- References
- 6
- FWCI
- 17.05
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.emerald.com/insight/site-policies (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.