The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Thermal conductivity of doped polysilicon layers
Abstract
The thermal conductivities of doped polysilicon layers depend on grain size and on the concentration and type of dopant atoms. Previous studies showed that layer processing conditions strongly influence the thermal conductivity, but the effects of grain size and dopant concentration were not investigated in detail. The current study provides thermal conductivity measurements for low-pressure chemical-vapor deposition (LPCVD) polysilicon layers of thickness near 1 /spl mu/m doped with boron and phosphorus at concentrations between 2.0/spl times/10/sup 18/ cm/sup -3/ and 4.1/spl times/10/sup 19/ cm/sup -3/ for temperatures from 20 K to 320 K. The data show strongly reduced thermal conductivity values at all temperatures compared to similarly doped single-crystal silicon layers, which indicates that grain boundary scattering dominates the thermal resistance. A thermal conductivity model based on the Boltzmann transport equation reveals that phonon transmission through the grains is high, which accounts for the large phonon mean free paths at low temperatures. Algebraic expressions relating thermal conductivity to grain size and dopant concentration are provided for room temperature. The present results are important for the design of MEMS devices in which heat transfer in polysilicon is important.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Conductivity of Pure and Impure Silicon, Silicon Carbide, and Diamond
Slack, G. A. (1964) · Journal of Applied Physics · doi:10.1063/1.1713251 · Cited by 695
Thermal conduction in doped single-crystal silicon films
Asheghi, M., Kurabayashi, K., Kasnavi, R., & Goodson, K. E. (2002) · Journal of Applied Physics · doi:10.1063/1.1458057 · Cited by 469
Self-citationPhonon-boundary scattering in thin silicon layers
Asheghi, M., Leung, Y. K., Wong, S. S., & Goodson, K. E. (1997) · Applied Physics Letters · doi:10.1063/1.119402 · Cited by 337
Self-citationTai, Y. C., Mastrangelo, C. H., & Muller, R. S. (1988) · Journal of Applied Physics · doi:10.1063/1.339924 · Cited by 137
Cited by
Cahill, D. G., Ford, W. K., Goodson, K. E., Mahan, G. D., Majumdar, A., Maris, H. J., Merlin, R., & Phillpot, S. R. (2003) · Journal of Applied Physics · doi:10.1063/1.1524305 · Cited by 2,825
Self-citationEnergy dissipation and transport in nanoscale devices
Pop, E. (2010) · Nano Research · doi:10.1007/s12274-010-1019-z · Cited by 1,169
Reduction in the Thermal Conductivity of Single Crystalline Silicon by Phononic Crystal Patterning
Hopkins, P. E., Reinke, C. M., Su, M. F., Olsson, R. H., Shaner, E. A., Leseman, Z. C., Serrano, J. R., Phinney, L. M., & El-Kady, I. (2011) · Nano Letters · doi:10.1021/nl102918q · Cited by 423
Liao, B., Qiu, B., Zhou, J., Huberman, S., Esfarjani, K., & Chen, G. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.115901 · Cited by 336
Hopkins, P. E. (2013) · ISRN Mechanical Engineering · doi:10.1155/2013/682586 · Cited by 302
Metadata
- Authors
- McConnell, A. D., Uma, S., & Goodson, K. E.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2001
- Volume
- 10
- Issue
- 3
- Pages
- 360-369
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2158588569
- Cited by
- 223
- References
- 4
- FWCI
- 6.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.