The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Battery Energy Storage Models for Optimal Control
Open accessAbstract
As batteries become more prevalent in grid energy storage applications, the controllers that decide when to charge and discharge become critical to maximizing their utilization. Controller design for these applications is based on models that mathematically represent the physical dynamics and constraints of batteries. Unrepresented dynamics in these models can lead to suboptimal control. Our goal is to examine the state-of-the-art with respect to the models used in optimal control of battery energy storage systems (BESSs). This review helps engineers navigate the range of available design choices and helps researchers by identifying gaps in the state-of-the-art. BESS models can be classified by physical domain: state-of-charge (SoC), temperature, and degradation. SoC models can be further classified by the units they use to define capacity: electrical energy, electrical charge, and chemical concentration. Most energy based SoC models are linear, with variations in ways of representing efficiency and the limits on power. The charge based SoC models include many variations of equivalent circuits for predicting battery string voltage. SoC models based on chemical concentrations use material properties and physical parameters in the cell design to predict battery voltage and charge capacity. Temperature is modeled through a combination of heat generation and heat transfer. Heat is generated through changes in entropy, overpotential losses, and resistive heating. Heat is transferred through conduction, radiation, and convection. Variations in thermal models are based on which generation and transfer mechanisms are represented and the number and physical significance of finite elements in the model. Modeling battery degradation can be done empirically or based on underlying physical mechanisms. Empirical stress factor models isolate the impacts of time, current, SoC, temperature, and depth-of-discharge (DoD) on battery state-of-health (SoH). Through a few simplifying assumptions, these stress factors can be represented using regularization norms. Physical degradation models can further be classified into models of side-reactions and those of material fatigue. This article demonstrates the importance of model selection to optimal control by providing several example controller designs. Simpler models may overestimate or underestimate the capabilities of the battery system. Adding details can improve accuracy at the expense of model complexity, and computation time. Our analysis identifies six gaps: deficiency of real-world data in control literature, lack of understanding in how to balance modeling detail with the number of representative cells, underdeveloped model uncertainty based risk-averse and robust control of BESS, underdevelopment of nonlinear energy based SoC models, lack of hysteresis in voltage models used for control, lack of entropy heating and cooling in thermal modeling, and deficiency of knowledge in what combination of empirical degradation stress factors is most accurate. These gaps are opportunities for future research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Accurate electrical battery model capable of predicting runtime and I-V performance
Chen, M., & Rincon-Mora, G. A. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874229 · Cited by 2,427
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Modeling of Lithium-Ion Battery Degradation for Cell Life Assessment
Xu, B., Oudalov, A., Ulbig, A., Andersson, G., & Kirschen, D. S. (2018) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2016.2578950 · Cited by 1,162
Critical Review on the Battery State of Charge Estimation Methods for Electric Vehicles
Xiong, R., Cao, J., Yu, Q., He, H., & Sun, F. (2018) · IEEE Access · doi:10.1109/access.2017.2780258 · Cited by 1,004
Pinson, M. B., & Bazant, M. Z. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.044302jes · Cited by 946
A holistic aging model for Li(NiMnCo)O2 based 18650 lithium-ion batteries
Schmalstieg, J., Käbitz, S., Ecker, M., & Sauer, D. U. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.012 · Cited by 755
Arora, P., Doyle, M., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392512 · Cited by 586 · cited 2×
“where ηsr is the side-reaction overpotential, φ1,n is the solidphase potential, φ2,n is the solution-phase potential, ηn is the anode overpotential, calculated using the Butler-Volmer equation (37), 8sr is the side reaction reference voltage, which can be conservatively estimated to be zero in this case [81], [111], J…”
BackgroundMethodJayasekara, N., Masoum, M. A. S., & Wolfs, P. J. (2016) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2015.2487360 · Cited by 260
Time-Domain Parameter Extraction Method for Thévenin-Equivalent Circuit Battery Models
Hentunen, A., Lehmuspelto, T., & Suomela, J. (2014) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2014.2318205 · Cited by 245
Cited by
Longhitano, P. D., Bérenguer, C., & Echard, B. (2024) · Computers & Industrial Engineering · doi:10.1016/j.cie.2024.109892 · Cited by 15
Metadata
- Authors
- Rosewater, D. M., Copp, D. A., Nguyen, T. A., Byrne, R. H., & Santoso, S.
- Venue
- IEEE Access
- Published
- 2019
- Volume
- 7
- Pages
- 178357-178391
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2992406273
- Cited by
- 187
- References
- 10
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Battery Energy Storage Models for Optimal Control. https://app.cochat.ai/papers/10.1109/access.2019.2957698
- The paper
- Rosewater, D. M., Copp, D. A., Nguyen, T. A., Byrne, R. H., & Santoso, S. (2019). Battery Energy Storage Models for Optimal Control. IEEE Access. https://doi.org/10.1109/access.2019.2957698
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.