Optimization and experimental validation of medium-frequency high power transformers in solid-state transformer applications
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
High power isolated DC-DC converters are likely to provide solutions for many technical challenges associated with power density, efficiency and reliability in potential applications such as offshore wind farms, inter-connection of DC grids, MVDC in data centers and in future solid state transformer applications. The high power medium frequency transformer (HPMFT) is one of the key elements of such a converter to realize the voltage adaption, isolation requirements, as well as high power density. This paper describes a design and optimization methodology taking into account the loss calculation, isolation requirements and thermal management. Incorporating this design methodology, an optimization process with a wide range of parameter variations is applied on a 50 kW, 1 / 3 kV, 5 kHz transformer to find the highest power density while the efficiency, isolation, thermal and leakage inductance requirements are all met. The optimized transformers are then manufactured and will be presented in this paper.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Previous research [11], [12], [15], [16] investigated the optimal design methodologies for MFTs.”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [11]
In the citing paper
“These designs have power rating exceeding 50 kW, and the operating frequency is in the range of 1.75 kHz and 22 kHz [8-14].”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [11]
In the citing paper
“Test results suggest that the nanocrystalline core MFT has a higher power density and efficiency.”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [11]
In the citing paper
“The methodologies have the aim of reaching the best MF transformer for a given power converter topology, by optimizing transformer efficiency, weight, transformer leakage and magnetizing inductances at the same time.”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [11]
Citations
Cites
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
High-Power Bidirectional DC–DC Converter for Aerospace Applications
Naayagi, R. T., Forsyth, A. J., & Shuttleworth, R. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2184771 · Cited by 305
A study of volume and weight vs. frequency for high-frequency transformers
Gu, W.-J., & Liu, R. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1993.472059 · Cited by 152
Bahmani, M. A., & Thiringer, T. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2371057 · Cited by 104
Self-citationBahmani, M. A., Thiringer, T., Rabiei, A., & Abdulahovic, T. (2015) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2015.2494883 · Cited by 101
Self-citationBahmani, M. A., Thiringer, T., & Ortega, H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2292593 · Cited by 71 · cited 1×
“These challenges are basically related to the extra losses as a result of eddy current in the magnetic core, excess losses in the windings due to enhanced skin and proximity effects [4] and parasitic elements, i.”
BackgroundSelf-citationVillar, I., Mir, L., Etxeberria-Otadui, I., Colmenero, J., Agirre, X., & Nieva, T. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342754 · Cited by 64
High voltage dual active bridge with series connected high voltage silicon carbide (SiC) devices
Vechalapu, K., Kadavelugu, A., & Bhattacharya, S. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6953674 · Cited by 50
Core loss behavior in high frequency high power transformers—I: Effect of core topology
Bahmani, M. A., Agheb, E., Thiringer, T., Høidalen, H. K., & Serdyuk, Y. V. (2012) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4727910 · Cited by 41
Self-citationDesign and Optimization of HF Transformers for High Power DC-DC Applications
Bahmani, A. (2014) · Chalmers Research (Chalmers University of Technology) · Cited by 27
Research works printed but not linked: 1
- meyer, 2007, Key components for future offshore DC grids
Cited by
High-Frequency Transformer Design for Modular Power Conversion From Medium-Voltage AC to 400 VDC
Zhao, S., Li, Q., Lee, F. C., & Li, B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2774440 · Cited by 231
“7 kV IGBT 20 kHz Nanocrystalline and Ferrite CUT 2016 [17] 50 kW 1.”
BackgroundDesign and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters
Guo, Z., Yu, R., Xu, W., Feng, X., & Huang, A. Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059879 · Cited by 115
“The CUT [11] also introduces two MFT prototypes (50 kW/5 kHz) design by using nanocrystalline and ferrite magnetic cores, respectively.”
BackgroundMethodLi, Z., Hsieh, E., Li, Q., & Lee, F. C. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3279030 · Cited by 111
“Some articles have proposed optimization methods that utilize numerical optimization techniques to sweep through different design parameters and obtain the optimal tradeoff for each design objective [20], [21], [32], [33], [41], [42].”
MethodFabre, J., Ladoux, P., Caron, H., Verdicchio, A., Blaquière, J., Flumian, D., & Sanchez, S. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3033659 · Cited by 66
Power electronic transformers: A review
Battal, F., Balcı, S., & Sefa, İ. (2020) · Measurement · doi:10.1016/j.measurement.2020.108848 · Cited by 79
Metadata
- Authors
- Bahmani, M. A., Thiringer, T., & Kharezy, M.
- Affiliations
- Chalmers University of Technology (SE)
- RISE Research Institutes of Sweden (SE)
- Venue
- 2016 IEEE Applied Power Electronics Conference and Exposition (APEC)
- Publisher
- IEEE
- Published
- 2016-03
- Pages
- 3043-3050
- ISSN
- 1048-2334 (ISSN-L)
- OpenAlex
- W2403200567
- Cited by
- 45
- References
- 10
- Citations by year
- 2026: 1 · 2025: 4 · 2024: 5 · 2023: 4 · 2022: 7 · 2021: 2 · 2020: 7 · 2019: 4 · 2018: 4 · 2017: 7
- FWCI
- 7.04
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- Energimyndigheten
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- solid-state transformer, transformer design optimization, isolated DC-DC converter, power density, transformer losses, galvanic isolation, thermal management, leakage inductance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimization and experimental validation of medium-frequency high power transformers in solid-state transformer applications. https://app.cochat.ai/papers/10.1109/apec.2016.7468297
- The paper
- Bahmani, M. A., Thiringer, T., & Kharezy, M. (2016). Optimization and experimental validation of medium-frequency high power transformers in solid-state transformer applications. 2016 IEEE Applied Power Electronics Conference and Exposition (APEC). https://doi.org/10.1109/apec.2016.7468297
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.